OVERVIEW | bakerhughes.com SureSENS 125LP Monitoring System Monitor performance and optimize artificial lift operations with permanent gauges Applications nnHeavy oil nnConventional oil nnGas well dewatering nnLow marginal wells nnBottomhole pressure up to 5,000 psi and temperatures of up to 257°F nnRequiring single, multiple-point, or differential pressure measurements Features and benefits nnSystem designed and qualified for reliable operation at 257°F The SureSENTM 125LP system delivers critical data on pump pressures and fluid temperature–all aimed at increasing run life and improving artificial lift system performance. The system is used to monitor artificial lift parameters via the TEC downhole cable. The flexibility of the system enables the selection of a number of parameter measurements, including single-point zonal pressure measurements to multiple-point pressure measurements (multiple zone or intelligent applications). The SureSENS 125LP system provides operators with a reliable tool for accurately maintaining established well pressures and measuring fluid temperatures, while optimizing production rates and reservoir recovery. SureSENS 125LP system provides the following parameters: nnIntake pressure nnIntake temperature nnDischarge pressure nnDischarge temperature Contact your Baker Hughes representative today or visit www.bakerhughes.com/SureSENS to find out how the SureSENS 125LP monitoring system can help you extend artificial lift run life. –– Utilizes silicon-on-silicon transducer nnSupports multiple monitoring devices on a single TEC –– Deploys multiple gauges for redundant readings nnMetal-to-metal sealing technology –– Ensures mechanical integrity of gauge assembly oVERVIEW Mechanical Specification Length 28.9 in. Diameter 1.50 in. Weight 6.0 lbs. Material Inconel 718 Transducer Silicon-on-silicon Transducer option 5,000 psi Environmental Specification Temperature rating (operating) 13°F to 257°F Storage temperature -67°F to 257°F Vibration >5G Shock 500 G Measurement Specification Pressure measurement range (calibrated) 15 – 5,000 psi Pressure accuracy +- 5.0 psi Pressure resolution 0.1 psi Temperature measurement range (calibrated) 77°F to 257°F Temperature accuracy +- 1.8°F Temperature resolution 0.18ºF Maximum sample rate / second 1 Number of gauges support / TEC 2 Cable distance transmission 30,000 ft SureSEN is a trademark of Baker Hughes Incorporated. Disclaimer of Liability: This information is provided for general information purposes only and is believed to be accurate as of the date hereof; however, Baker Hughes Incorporated and its affiliates do not make any warranties or representations of any kind regarding the information and disclaim all express and implied warranties or representations to the fullest extent permissible by law, including those of merchantability, fitness for a particular purpose or use, title, non-infringement, accuracy, correctness or completeness of the information provided herein. All information is furnished “as is” and without any license to distribute. The user agrees to assume all liabilities related to the use of or reliance on such information. BAKER HUGHES INCORPORATED AND ITS AFFILIATES SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER INCLUDING BUT NOT LIMITED TO ITS NEGLIGENCE. © 2015 Baker Hughes Incorporated. All rights reserved. 42909 03/2015