Download Report

2
free
skill
level
SUPPLIES & TOOLS:
• 1/2 yd Wool felt
• Clover® items:
Large Felting Needle Mat
Felting Needle Tool
Single Felting Needle
• One cork
• Serrated knife
• Sharp pointed object, such as an awl
• 2"x15"x17" High-density foam pad
• Lion Brand® Wool Ease Thick & Quick® yarn
1 skein each of: spice, cranberry, pumpkin, claret
• 1 pkg Natural Wool Roving, Moss Green
• Scissors
• Marking pen
• Cardstock
DIRECTIONS:
1. Cut a 7"x2" piece of felt for each napkin ring.
2. Cut the cork in half with serrated knife. Make a hole through the center of the cork half with a sharp pointed
object. Pull out the sharp pointed object and insert a single felting needle into the hole. This creates a handle
to hold onto when using the single felting needle. Follow manufacturer’s instructions to prevent breaking needles.
3. Create leaves by laying wool fibers crisscross over the foam pad in an area that measures 4"x4". Lay leaf
pattern A on top of the fibers. Hold the leaf pattern with one hand and using the single felting needle, go
around the leaf pattern with a straight up and down motion. Remove the leaf pattern. Fold over the fibers that
extend beyond the outline and needle felt them to secure the fibers in place. Use the Clover® Felting Needle
tool to create the “felt” leaf, adding fibers as necessary. Try to maintain a leaf shape. Continue using the
Clover® Felting Needle tool and adding fibers until the desired thickness of the felt is achieved. Pull the piece
up and away from the foam pad occasionally so fibers don’t become too entwined in the foam. Turn over
occasionally and use the needle felting tool on the back. Use the Felting Needle mat interchangeably with the
foam pad to further lock in the fibers.
4. When the desired thickness is achieved, remove the newly created felt piece and lay leaf pattern A on it. Trim
with scissors where necessary to perfect the leaf shape. Use the Felting Needle tool to soften edges.
5. Place the 7"x2" piece of felt on the foam mat. Cut a piece of yarn 10" long and separate it into two strands.
Twist the yarn and use the Single Felting Needle to affix it down the center of the length of felt. Refer to
photo. When secure, use the Clover® Felting Needle tool to fix the yarn firmly into felt strip. Replace the foam
pad with the Felting Needle Mat and continue needle felting until the desired look is achieved.
needle-felted napkin rings
6. Lay the 7"x2" felt piece on either the foam pad or Felting Needle Mat and place the leaf in the center. Using a
single strand of yarn as a vein and stem, and using the single needle, affix yarn strand to the leaf. Then use
the Felting Needle tool to fix strand securely. Turn over and needle felt it on the back as desired.
7. Steam press back and front.
more projects, tips & techniques at Joann.com™
Project courtesy of
Jo-Ann Fabric and Craft Stores
Designed by Virginia M. Pillsbury
®
Napkin Ring Pattern
7"x2"
Medium Leaf Pattern A
Pumpkin Leaf
Enlarge patterns 25%
Skill Level 2: Some needle-felting experience helpful
Approximate Crafting Time: 45 min. each
Due to the seasonal nature of many projects, supplies may be available for a limited time only. Please read all
instructions prior to beginning; read and follow all manufacturers’ instructions for all tools and materials used.
Provide adult supervision if children participate in this or any craft project. Because Jo-Ann Stores, Inc. has no
control over surroundings or the use of materials and tools during construction of projects, Jo-Ann Stores, Inc.
disclaims any liability for injury, damage or other untoward results. Content of this How To sheet is presented in
good faith, but no warranty is given, nor results guaranteed. ©2008 Jo-Ann Stores, Inc. All rights reserved.
P279-735