Sikadur® VPC

Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc.
SECTION I: PRODUCT INFORMATION
®
PRODUCT:
Sikadur VPC
USAGE:
Universal rapid Polymer concrete
th
PART A
REVISION DATE: May 27 , 2015
MANUFACTURER/SUPPLIER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION:
UN NUMBER:
Packaging Group:
Resin solution
1866
III
WHMIS Classification: B2, D2B
Class:
3
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients
%
T.L.V.
# CAS
LD50
(species, route)
LC50
(species, route)
VINYL ESTER RESIN
30-60
NOT AVAILABLE
36425-16-8
NOT AVAILABLE
NOT AVAILABLE
STYRENE
MONOMER
INHIBITED
30-60
ACGIH TWA
50 ppm
100-42-5
2 650 (rat, oral)
2 425 ppm
(rat, inh. 4 hrs)
METHYL
METHACRYLATE
15-40
ACGIH TWA
50 ppm
80-62-6
7 900 (rat, oral)
7 093 ppm
(rat, inh. 4 hrs)
3-7
ACGIH TWA
10 ppm
13463-67-7
NOT AVAILABLE
NOT AVAILABLE
0.5-1.5
NOT AVAILABLE
91-66-7
NOT AVAILABLE
1 920mg/m /4H
(rat)
TITANIUM DIOXIDE
N,NDIETHYLANILINE
3
SECTION III: PHYSICAL CHARACTERISTICS
Physical State:
Appearance and Odor:
Liquid
Grey, pungent
Odor Threshold:
Evaporation Rate:
Vapor Density:
Vapor Pressure:
Not available
Not available
4.00
Not available
Boiling Point:
Freezing Point:
Density:
Water Solubility:
pH:
% volatility by volume:
Water/Oil Distribution:
101°C
Not available
1.03 g/ml
Insoluble
Not available
0.00
Not available
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc.
PRODUCT:
®
Sikadur VPC
PART A
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability:
Yes
If Yes, under what conditions:
Flames, sparks
Extinguishing methods:
Water fog, CO2, dry
chemical, foam
Special Methods:
Fire-fighters must wear
complete protective
clothing with respiratory
equipment
TDG Flammability Class:
Flammable upper limits (% vol.):
Flammable lower limits (% vol.):
Flash Point (set flash closed cup):
Auto-ignition temperature:
Dangerous Combustion Products
3
Not established
Not established
9°C
Not applicable
Carbon oxides,
phenols
Protect from mechanical impact:
No
Protect from static discharge:
Yes
SECTION V: REACTIVITY DATA
Chemical stability:
No
If not, under what conditions:
Heat, open
flames, sparks,
aging. Avoid
excessive
heating over long
periods of time.
Incompatibility with other material:
Not known
If Yes, which ones:
Dangerous decomposition products:
Carbon oxides,
phenols
Polymerization Risks:
May occur
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc.
PRODUCT:
®
Sikadur VPC
PART A
SECTION VI: TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes:
Will result in eye irritation
Carcinogenicity:
Not established
Skin:
Will result in skin irritation
Toxic effects
on reproduction:
Not established
Teratogenicity:
Not established
Mutagenicity:
Not established
Product with synergistic
effects:
Not known
Inhalation:
Ingestion:
High vapor concentration may produce
nausea, vomiting, headaches, dizziness,
unconsciousness and asphyxia resulting
in central nervous system effects
May cause abdominal pain, vomiting and
diarrhea
This product can cause skin and respiratory sensitization.
An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems.
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc.
PRODUCT:
®
Sikadur VPC
PART A
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT
OTHERS
Gloves:
Ventilation:
Impervious gloves
Respiratory equipment: If respiratory respiration is
required, use an approved air
purifying respirator
Eyes:
Chemical goggles and full face
shield
Shoes:
Security shoes
Clothing:
Long sleeved, body covering and
protective clothing
Other:
Procedure in case
of leaks:
Handling and
Equipment methods:
No
Warehouse
Requirements:
Special Shipping
Instructions:
Waste Disposal
Use adequate ventilation
Remove all sources of ignition
(flames, sparks, etc.). Provide
adequate ventilation. Avoid
prolonged breathing of vapors.
Remove to a container or absorb
with clay, diatomaceous earth or
other suitable inert absorbent.
Avoid inhalation, skin and eye
contact. Wash repeatedly with
soap and water during the
workday.
Keep all containers closed in a
cool, dry and well ventilated area.
Keep away from heat and open
flame.
See TDG class.
Dispose of residues according to
municipal, provincial or federal
laws for disposal of chemicals.
Do not incinerate closed
containers.
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc.
PRODUCT:
®
Sikadur VPC
PART A
SECTION VIII: FIRST AID
Skin:
Wash thoroughly with soap and water.
If irritation persists, consult a physician
Eyes:
Rinse eyes immediately with plenty of water for at least 15 minutes.
See a physician immediately.
Inhalation:
Remove the affected person to fresh air.
If breathing is difficult, administer oxygen.
Consult a physician if required.
Ingestion:
Do not induce vomiting. Administer large amount of water or milk if available.
Do not give anything by mouth to an unconscious person.
Transport to a medical facility.
SECTION IX: PREPARATION INFORMATION
Prepared By:
Telephone #:
Fax #:
R & D of Sika Canada Inc.
(514) 697-2610
(514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Product Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section IX of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sika.ca or 514-697-2610.
AQ 191 A
Date: 2012/02/01
App: S.G.
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc.
SECTION I: PRODUCT INFORMATION
®
PRODUCT:
Sikadur VPC
USAGE:
Universal rapid Polymer concrete
st
PART B
REVISION DATE: February 1 , 2015
MANUFACTURER/SUPPLIER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION:
UN NUMBER:
Packaging Group:
Organic peroxide type D, Solid
3106
II
WHMIS Classification: C, D2B, F
Class:
5.2
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients
%
T.L.V.
# CAS
LD50
(species, route)
LC50
(species, route)
BENZOYL PEROXIDE
40-70
ACGIH TWA
3
5 mg/m
94-36-0
7 710 (rat, oral)
NOT AVAILABLE
SECTION III: PHYSICAL CHARACTERISTICS
Physical State:
Appearance and Odor:
Solid
White, mild
Odor Threshold:
Evaporation Rate:
Vapor Density:
Vapor Pressure:
Not available
Not available
Not available
Not available
Boiling Point:
Freezing Point:
Density:
Water Solubility:
pH:
% volatility by volume:
Water/Oil Distribution:
Not available
Not available
1.10 g/ml
Insoluble
Not available
0.00
Not available
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc.
PRODUCT:
®
Sikadur VPC
PART B
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability:
No
If Yes, under what conditions:
Extinguishing methods:
Water fog, CO2, dry
chemical, foam
Special Methods:
Fire-fighters must wear
complete protective
clothing with respiratory
equipment
TDG Flammability Class:
Flammable upper limits (% vol.):
Flammable lower limits (% vol.):
Flash Point (setaflash closed cup):
Auto-ignition temperature:
Dangerous Combustion Products
Not applicable
Not established
Not established
Not established
Not applicable
Carbon oxides,
biphenyls
Protect from mechanical impact:
No
Protect from static discharge:
No
SECTION V: REACTIVITY DATA
Chemical stability:
Yes
Dangerous decomposition products:
Carbon oxides,
biphenyls
Not known
Polymerization Risks:
May occur
If not, under what conditions:
Incompatibility with other material:
If Yes, which ones:
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc.
PRODUCT:
®
Sikadur VPC
PART B
SECTION VI: TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes:
Will result in eye irritation
Carcinogenicity:
Not established
Skin:
Will result in skin irritation
Toxic effects
on reproduction:
Not established
Teratogenicity:
Not established
Mutagenicity:
Not established
Product with synergistic
effects:
Not known
Inhalation:
Ingestion:
Will result in respiratory tract irritation
May cause abdominal pain, vomiting and
diarrhea
This product can cause skin sensitization.
An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems.
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc.
PRODUCT:
®
Sikadur VPC
PART B
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT
OTHERS
Gloves:
Ventilation:
Impervious gloves
Respiratory equipment: If respiratory respiration is
required, use an approved air
purifying respirator
Eyes:
Chemical goggles and full face
shield
Shoes:
Security shoes
Clothing:
Long sleeved, body covering and
protective clothing
Other:
Procedure in case
of leaks:
Handling and
Equipment methods:
No
Warehouse
Requirements:
Special Shipping
Instructions:
Waste Disposal:
Use adequate ventilation
Remove all sources of ignition
(flames, sparks, etc.). Provide
adequate ventilation. Avoid
prolonged breathing of vapors.
Remove to a container or absorb
with clay, diatomaceous earth or
other suitable inert absorbent.
Avoid inhalation, skin and eye
contact. Wash repeatedly with
soap and water during the
workday.
Keep all containers closed in a
cool, dry and well ventilated area.
See TDG class.
Dispose of residues according to
municipal, provincial or federal
laws for disposal of chemicals.
Do not incinerate closed
containers.
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc.
PRODUCT:
®
Sikadur VPC
PART B
SECTION VIII: FIRST AID
Skin:
Wash thoroughly with soap and water.
If irritation persists, consult a physician
Eyes:
Rinse eyes immediately with plenty of water for at least 15 minutes.
See a physician immediately.
Inhalation:
Remove the affected person to fresh air. If breathing is difficult, administer oxygen.
Consult a physician if required.
Ingestion:
Do not induce vomiting. Administer large amount of water or milk if available.
Do not give anything by mouth to an unconscious person.
Transport to a medical facility.
SECTION IX: PREPARATION INFORMATION
Prepared By:
Telephone #:
Fax #:
R & D of Sika Canada Inc.
(514) 697-2610
(514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Product Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section IX of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sika.ca or 514-697-2610.
AQ 191 A
Date: 2012/02/01
App: S.G.