FPGA SSTDR Evaluation Kit LW-FPGA-EvalKit-01 TM The LiveWire FPGA SSTDR Evaluation Kit (LW-FPGA-EvalKit-01) Features is designed for use by a customer to evaluate the SSTDR Detection and location of hard faults and intermittent faults on energized or unenergized cables technology in the environment of the customer’s systems. Customers can use the Evaluation Kit to develop integration Cable sampling speed up to 500 scans/second methods for particular systems and to collect and store raw Allows monitoring of wires up to 6 kilometers data and fault result information for use in trend or other Raw SSTDR data and fault result information can be stored on a PC for use in trend analysis or other characterization characterization analysis. Accessories Micro USB Cable 5 Ft Leader Cable 1000V CAT II Flanged Crocodile Clips: Red and Black 1000V CAT III UL/CSA LiveWire Innovation, Inc. 10288 South Jordan Gateway, Suite A South Jordan, UT 84095 USA Tel: (855) 346-3358 livewireinnovation.com REV 04/22/15 TM FPGA SSTDR Evaluation Kit Specifications Description Size / Dimensions 5.300” L x 5.100” W (134.62mm x 129.54mm) Weight 9.5 oz. Power 5V power via USB connector Voltage Rating The FPGA SSTDR Evaluation Kit is designed for use on cabling systems with voltage up to 1000 Volts. For higher voltages, contact LiveWire. The FPGA SSTDR Evaluation Kit is designed to ratings of CAT II 1000V/CAT III 600 V (6 kV transient). Measurement Method Spread Spectrum Time Domain Reflectometry (SSTDR) VOP Range 3-digit precision ranging from 20.0% to 99.9% Distance to Fault Accuracy +/- 2% accuracy for cables > 100 feet (+/- 1% for controlled impedance cables) +/- 2 feet for cables < 100 feet Note: Accuracy Range applies with known VOP and consistent cable parameters Maximum Testable Distance/Length Up to 20,000 ft. (6 km.) maximum testable cable length Note: Maximum testable cable length varies with VOP and cable type. Contact LiveWire Innovation for cables beyond this length Output Signal Amplitude 0.016 - 1.0 V peak-to-peak, adjustable to desired minimum/maximum amplitudes Operating Environment Operating temperature: -20 to 70 °C ( -4 to 158 °F) Storage temperature: -30 to 85 °C (-22 to 185 °F) Humidity: 10% to 90%, non-condensing Altitude: 6,500 ft. (2,000m) operating PC Interface Windows PC (not included) interface for controlling and reading info from the FPGA SSTDR Evaluation Kit. Linux version available upon request. Material Plastic, ABS Material Flammability Rating UL94 HB Ratings IP40 SSTDR Interface Connection Banana jack connection No calibration needed No metrology calibration required English or metric measurements International applications Required Additional Equipment Windows PC (Windows 7+) is required to operate and read results from the FPGA SSTDR Evaluation Kit. Minimum of 4 GB memory (RAM) (8 GB recommended); 500 GB hard drive recommended. Accessories Micro USB Cable, 5 ft Leader Cable 1000V CAT II, Flanged Crocodile Clips: Red and Black 1000V CAT III UL/CSA LiveWire Innovation, Inc. 10288 South Jordan Gateway, Suite A South Jordan, UT 84095 USA Tel: (855) 346-3358 livewireinnovation.com
© Copyright 2024