Tigrato Memory Wire Bracelet Design by Amy Kapphan for VenetianBeadShop This is a very easy bracelet, and the rubber is popular today. We used our Topaz and Black Tigrato (Tiger) beads. It could be a great Mother-Daughter project. SKILL: Wire Wrapping (or Looping) or you could skip the little dangles if you don’t want this challenge. Tools: Memory Wire Cutter, Round Nose Pliers, Side Cutters Components Part SKU Quantity Item Name BA-347B-050 1 Beadalon Silver Plated Memory Wire, Round, Large Bracelet, .5 oz F-SS-HP1524BE 2 1 1/2 Inch Sterling Silver Headpin 24ga, Ball End RN-06-G5S 2 Dark Topaz 6mm Gold Foil Round SPKL-RN-10-TIG-516 16 Dark Topaz & Black Tiger Bright Sparkle Venetian Bead Round 10mm SPKL-RN-16-T-TIG516 1 Topaz Black Tiger Transparent Sparkle Bead Round 16mm WS-RUB4MM-BLK 1 Black 4mm Rubber Cord, Per Foot Instructions: Step 1 Cut the rubber cord into 18 pieces which are 15mm in length, set aside Step 2 Begin stringing onto the memory wire (I leave the memory wire in the rings, it keeps the beads from sliding off and may save you some wire.) Begin with 1 piece of rubber, followed by a 10mm bead and repeat the pattern until you have strung 8 of the 10mm beads and 9 of the rubber cord pieces. Step 3. Add the 16mm Tigrato bead and repeat Step 2 for the other 8 beads and 9 pieces of rubber. Step 4. With the Round Nose Pliers, twist a loop in the end, making it go around twice. Step 5.Slice all the rubber and beads close to this loop. With the Memory Wire Cutter cut the other end about ¼ inch beyond the end of the last piece of rubber and repeat Step 4 above. Step 6. With the headpins, wire wrap the 6mm beads onto the loops you made on each end of the memory wire and cut the headpin close. TIG-516-MEM-BR Copyright 2014 VenetianBeadShop.com Page 1