S P E C I F I C A T I O N S
1
PRO WAVE
®
ROAD AND AREA LIGHTING
easyled.fi
2
PRO Wave®
PRO Wave series
“EXEMPT GROUP”
according to photobiological
safety standard IEC/EN 62471
the operators
and end users
NO RISK for
easyled.fi
Application & Modular design
3
PRO Wave shows the way
®
Easy LED Oy is a leading Finnish led luminaire manufacturer. The Easy LED luminaires can
be used in various applications both indoors and outdoors.
Optimal light distribution for all
installation heights
The modular design and the wide selection of
lenses enable optimal light distribution and
intensity for all installation heights between
3 to 30 meters.
Long lifespan and low operating costs
The advanced power management guarantees
over 80 000 hours of maintenance free usage
life and a low power consumption of 15–240 W
depending on the model.
Maintenance free solid construction
Easy LED PRO Wave® series of luminaires is designed for
street and area lighting in even the most demanding
environments. They can be used for all kinds of roads and
areas from small exercise trails to multiple lane freeways.
The modular construction, tough aluminum housing
and advanced power management make the PRO Wave®
luminaires long lasting and energy efficient. They can be
installed or retrofitted almost anywhere with the wide
range of mounts and fittings available.
There is also a range of PRO Wire luminaires for wire
installation
PRO Wave® luminaires are suitable for most common
road classes (AL, AE ja K) as well as for area lighting.
The light distribution of the luminaires is managed
with with different optics. The light can be either focused
on desired areas or used to provide wider general
lighting.
The luminaires are approved by the Finnish
Transport Agency and have IP66 protection
certificate as well as IK09 impact resistance
certified aluminum housing.
Designed and manufactured in Finland
The luminaires have been awarded both Design
from Finland and Made in Finland Key Flag
logos. All the components from led modules to
power management system come with five years’
warranty.
easyled.fi
4
PRO Wave®
Modular PRO Wave® is mor
Modularity
Because of their modular design, suitable
PRO Wave® luminaires are available for every road
type as well as for area lighting.
The power consumption of the luminaires varies
between 15 W to 240 W depending on the size and
configuration of the unit. The power consumption
does not increase during the luminaire’s lifespan
The luminous flux of the luminaires varies from
1 500 to 28 000 lumens.
Controlling systems
The luminaire’s dimmer is compatible
with all 1–10 V control voltage systems.
A DALI control is also available for the
PRO Wave®.
Maintenance free design
The easy to install PRO Wave®
luminaires have an IP66 protection
rating and over 80 000 hours
maintenance free usage lifespan.
Thanks to their smooth design, they
are also easy to keep clean.
Lifespan, efficiency and
reliability
The goal of design was to produce a
LED module combining best possible
longevity with high efficacy and
reliability.
To achieve these goals, the modules are
based on Osram Opto Semiconductors
Oslon series leds that are able to offer a
light color temperature (CCT normal) of
3 000, 4 000, 5 000 or 6 000 K with
multiple color rendering index.
For best possible light efficiency
and lifespan the led modules use
exceptionally low drive current, which
also enables low operating costs.
Application & Modular design
e than the sum of its parts
Tough and solid
The PRO Wave® luminaires are
assembled into a solid, low copper (less
than 0,1 mass-%) aluminum housing to
guarantee their corrosion resistance.
The optics’ are made of shock resistant
polycarbonate with IK09 impact protection
rating.
The fixing brackets can withstand
strong vibrations and harsh environments.
They enable versatile installation of the
luminaires to heights between
3 to 30 meters.
All screws are made of non-corrosive,
Delta D treated, stainless steel.
The stock color of the luminaires is
RAL 9006 white aluminum. Other
RAL colors or special coatings are available
on request.
The inbuilt relief valve prevents forming
of condensation inside the casing.
Customized drivers
The Easy LED driver technology, designed
and manufactured in Finland, is the secret
of the long lifespan of the PRO Wave®
luminaires.
The integrated drivers are optimized
for the led modules for best possible
performance. Combined with the
luminaires’ advanced power management
system that is beyond the norm, they
provide efficiency of up to 125 lm/W.
The PRO Wave® system – materials,
electronics and thermal management
– is designed to exceed 80 000 hours’
maintenance free usage lifespan, even in
environments with ambient temperatures
as high as +50°C.
The bright choice
PRO Wave® lens optics’ are made from
UV-stabilized polycarbonate and they’re
tailored for road and area lighting. The
amount of lens modules varies according to
the needs of the lighted area.
The light distribution can be adjusted with
different optics’. Even tailored optics’ are
available on request.
easyled.fi
5
6
PRO Wave®
The benefits of Easy LED luminaires
Tailored Easy LED
drivers
Easy LED offers a wide range of GS,
ENEC and FI certified constant current
led drivers. This enables designing the
luminaires for best possible performance
without compromising their protection or
EMC-requirements.
The tailored drivers enable optimized
system level solutions with the highest
possible light efficiency and overall
reliability. This applies to all models
regardless their size, as different led
driver combinations have been taken into
account already in their design.
The drivers are designed to withstand
the conditions inside the housing, even
when operating temperatures reach
+50°C.
To meet even the most stringent quality
requirements, all drivers are tested for
correct operation and performance
values before being installed inside the
luminaires.
Each luminaire is fully re-tested and
inspected after final assembly at Easy LED
factory.
Intelligent thermal protection
The intelligent automatic thermal protection of Easy LED luminaires ensures the long
life expectancy of the product – even if erroneously used in operating temperatures
higher than permitted. This feature is inbuilt in the tailor-made Easy LED constant
current drivers and is operational immediately after power is turned on.
Thermal protection gradually lowers
luminaires power level in smooth 20 %
steps when the operating temperature
exceeds +40°C or even +55°C, depending
on the model.
The system returns to full power using
advanced hysteresis when the operating
temperatures return to rated levels. For
human safety and maintenance purposes
luminaires will never completely shut
down.
Simplified operating principle of the built in intelligent thermal protection
Power [%]
100
80
60
40
20
0
-40
0
20
40
55
60
Operating temperature Ta [°C]
65
70
75
80
PRO Wave® Benefits
Realiably cooling design
Unlimited light control
All PRO Wave® luminaires are dimmable,
even the basic models. And when even
more flexibility or features are required,
you can’t go wrong with the wide range of
Easy LED luminaires.
Cooling of a device designed to last
for several decades cannot rely on
moving parts. Passive cooling without
fins is the safest method to control the
temperatures of a led luminaire.
The surface of the passive cooling
housing of PRO Wave® luminaires is
smooth, making the cooling reliable and
cleaning easier as it does not collect dust
or grime. The efficient design keeps the
PRO Wave® luminaires cool.
Growing light pollution has become a problem all around the world. The ambient light
hides the stars and confuses night insects. PRO Wave® luminaires are designed to distribute
maximum amount of light to the ground below – and minimal to the skies above.
easyled.fi
7
8
PRO Wave® Accessories
Kaamos brightens your finances
by dimming your lights
Kaamos is an automatic dimmer for PRO Wave®
luminaires, which saves money and increases
comfort by dimming the streetlights during the
quiet hours of the night.
Kaamos is suitable in locations where
outdoor lighting is required throughout
the year, but where less light is needed
during the most quiet midnight hours.
Such areas include for example parks,
courtyards and parking areas and quiet
streets. In residential areas Kaamos cuts the
amount of disturbing light in nighttime.
How the Kaamos works
Kaamos dims the lights 1 h 30 min before
the darkest point of the night by lowering
the 1–10 V lines voltage. The dimming is
carried out softly in 60 seconds.
The lighting is dimmed for 4 h 30 mins
after the darkest point of the night, after
which the system ramps softly up to full
power. The total time the dimming is in use
is 6 hours.
Kaamos can adjust its operation
intelligently in exceptional situations like
power failures.
Example of the operation
Kaamos works independently and
maintenance free without separate control
units or remote control. The intelligent
dimming system follows the seasons.
During the summer evenings, when less
lighting is needed, the dimming kicks in
soon after the streetlights are turned on
whereas in the wintertime lighting is on for
longer.
The user still controls the turning on and
off of the lights, as Kaamos only dims
them.
Kaamos can be installed during
assembly or retrofitted. It can also be
removed from the luminaire if needed.
High level
100 % (10 V)
Low level
50 % (4,5 V)
Time dimmed (max.)
Starting dimming before
the middle of night
Ending dimming after
the middle of night
6h
90 min (-1 h 30 min)
270 min (+4 h 30 min)
Ramping up
60 s
Ramping down
60 s
Power source
Power consumption
17.00
23.00
Easy LED driver
< 1 W (only when on)
05.00
08.00
Wintertime
Lighting turned on
Lighting dimmed
automatically
22.00 23.00
Lighting increased
automatically
05.00
Summertime
Lighting turned on
Lighting dimmed
automatically
Lighting
turned off
Lighting
turned off
The brightest optics
9
The Easy LED PRO Wave® luminaires use UV protected impact resistant polycarbonate optics. The light distribution can be adjusted
by tailoring the optics to suit the designed use and installation method of the luminaires. Road and area lighting use different optics
and even combined optics can be used for special needs. The PRO Wave® luminaires are designed to cast light only downwards,
which cuts light pollution significantly.
Easy LED PRO Wave® streetlight optics
UP-R
-4h
General optics for most roads, limits ambient
light efficiently
-3h
-2h
-1h
0h
1h
2h
3h
UP-D
Frost
Optics for area lighting and wide roads
with lower light poles
Soft general light for smooth lighting
3h
3h
3h
2h
2h
2h
1h
1h
1h
0h
0h
0h
-1h
-1h
-1h
-2h
-2h
-2h
-3h
4h
-4h
-3h
-2h
-1h
0h
1h
2h
3h
-3h
4h
-4h
-3h
-2h
-1h
0h
1h
2h
3h
-3h
4h
The most common Easy LED PRO Wave® combination optics (limited availability)
UP-DR2
-4h
-3h
UP-D2R
UP-DR
-2h
-1h
0h
1h
2h
3h
3h
3h
3h
2h
2h
2h
1h
1h
1h
0h
0h
0h
-1h
-1h
-1h
-2h
-2h
-2h
-3h
4h
-4h
-3h
-2h
-1h
0h
1h
2h
3h
-3h
4h
-4h
-3h
-2h
-1h
0h
easyled.fi
1h
2h
3h
-3h
4h
10
PRO Wave®
PRO Wave luminaires
– always the right light
®
®
The wide range of PRO Wave luminaires offers suitable light for every
lighting environment and need, despite of the installation height.
PRO Wave® 30 & 60
PRO Wave® 90 & 120
PRO Wave® 120, 150 & 180
Installation height 3–10 m
Installation height 6–16 m
Installation height 10–30 m
The smallest luminaires of the range for
lighting of exercise tracks, cycle ways
and suburban streets.
Efficient streetlighting for all kinds
of roads from collector roads to
highways and freeways.
The most efficient PRO Wave®
luminaires are primarily meant for
lighting of the freeways.
11
Technical information
Casing:
Solid aluminum
Stock color: White aluminum (RAL9006),
other RAL colors available on request.
Optics:
Optimized, impact resistant and UV stabilized
Easy LED polycarbonate optics. Nano-coating for
optics or ceramic coating for entire luminaire
available for even improved wear resistance.
Protection rating:
Temperature range:
Maintenance free luminaire usage life:
Control:
Light level dimming range:
Input voltage:
Input frequency:
Power factor (PF) typical:
IP66 and IK09
-40°C...+55°C (260 mA, 15 W)
or -40°C...+40°C (320 mA, 410 mA) (95 % RH)
80 000 hours at up to +50°C ambient
(260 mA & 15 W)
80 000 hours at up to +40°C ambient
(320 mA & 410 mA)
1–10 V compatible with all control systems.
DALI control and
KAAMOS dimmer also available.
20 % - 100 % ( PRO Wave 30 : 5 %–100 %)
230 VAC (operating range 195,5 – 253 VAC)
50/60 Hz
0,95
Intelligent inrush current control:
Inbuilt
Intelligent thermal protection:
Inbuilt
Installation:
Installation tube ø 34 – 60 mm,
Different fittings available.
Standard
Standard light color selection (CCT) norminal
Color Rendering index (CRI) typical
Luminaire luminous efficacy typical*
3 000 K
4 000 K
5 000 K
6 000 K
72
72
72
70
100 lm/W
107 lm/W
112 lm/W
120 lm/W
*Dependent on choice of optical solution. For latest values, ask for light distribution files.
Light unit lumen maintenance
Remaining luminous flux after 100 000 h of use
260 mA & 15 W
320 mA & 410 mA
Ta
L80F10 >100 000 h
Ta up to +55°C
Ta up to +40°C
55°C
0,81
L90F10 >100 000 h
Ta up to +25°C
Ta up to +20°C
40°C
0,87
0,84
25°C
0,91
0,89
20°C
0,92
0,90
15°C
0,93
0,91
10°C
0,94
0,92
5°C
0,95
0,93
16
IK09
IP66
260 mA & 15 W 320 mA & 410 mA
H20
41
07
ALU
O
PRO Wave® 30
PRO Wave 30
®
Leds: Weight: Dimensions (L x W x H): Easy LED driver:
Recommended installation height: Dimming minimum power level:
Surge protection (common & diff ):
Inrush current peak:
Earth leakage current:
System Power [W]
Current [A]
Luminous Flux* [lm]
30
4,2 kg
391 x 230 x 81 mm
3–8 m
1 pcs
10 %
(common & diff ) 4 kV / 3 kA
0,38 A, t=10 ms (50 % Ipeak)
0,41 mA
15 W
15
260 mA
25
320 mA
30
410 mA
39
15 W
0,08
260 mA
0,13
320 mA
0,14
410 mA
0,18
15 W
1600
260 mA
2700
320 mA
3200
410 mA
4050
*Luminous flux for 4 000 K. Values shown are nominal values and are subject
to +/- 10 % tolerance. For latest values, ask for light distribution files.
84
230
392
12
62
PRO Wave® 60
PRO Wave 60
®
Leds: Weight: Dimensions (L x W x H): Easy LED driver:
Recommended installation height: Dimming minimum power level:
Surge protection (common & diff ):
Inrush current peak:
Earth leakage current:
60
5,3 kg
516 x 230 x 81 mm
4–10 m
1 pcs
33 %
(common & diff ) 6 kV / 3 kA
1 A, t = 10 ms (50 % Ipeak)
0,41 mA
System Power [W]
260 mA
50
320 mA
60
Current [A] 260 mA
0,23
320 mA
0,28
Luminous Flux* [lm] 260 mA
5400
320 mA
6400
*Luminous flux for 4 000 K. Values shown are nominal values and are subject
to +/- 10 % tolerance. For latest values, ask for light distribution files.
84
517
230
62
easyled.fi
13
PRO Wave® 90
PRO Wave 90
®
Leds: Weight: Dimensions (L x W x H): Easy LED driver:
Recommended installation height: Dimming minimum power level: Surge protection (common & diff ):
Inrush current peak:
Earth leakage current:
System Power [W]
90
6,4 kg
641 x 230 x 81 mm
6–12 m
1 pcs
27 %
(common & diff ) 6 kV / 3 kA
1 A, t = 10 ms (50 % of Ipeak)
0,41 mA
260 mA
75
320 mA
90
Current [A] 260 mA
0,35
320 mA
0,41
Luminous Flux* [lm] 260 mA
8100
320 mA
9600
*Luminous flux for 4 000 K. Values shown are nominal values and are subject
to +/- 10 % tolerance. For latest values, ask for light distribution files.
230
84
642
14
62
PRO Wave® 120
PRO Wave 120
®
Leds: Weight: Dimensions (L x W x H): Easy LED driver:
Recommended installation height: Dimming minimum power level:
Surge protection (common & diff ):
Inrush current peak :
Earth leakage current:
System Power [W]
120
7,3 kg
766 x 230 x 81 mm
8–16 m
1 pcs
24 %
(common & diff ) 6 kV / 3 kA
1 A, t = 10 ms (50 % of Ipeak)
0,41 mA
260 mA
99
320 mA
120
Current [A] 260 mA
0,46
320 mA
0,55
Luminous Flux* [lm] 260 mA
10800
320 mA
12800
*Luminous flux for 4 000 K. Values shown are nominal values and are subject
to +/- 10 % tolerance. For latest values, ask for light distribution files.
84
767
230
62
easyled.fi
15
PRO Wave® 150
PRO Wave 150
®
Leds: 150
8,4 kg
891 x 230 x 81 mm
10–20 m
Weight: Dimensions (L x W x H): Easy LED driver:
Recommended installation height: 2 pcs
30 %
(common & diff ) 6 kV / 3 kA
2 A, t = 10 ms (50 % of Ipeak)
Dimming minimum power level:
Surge protection (common & diff ):
Inrush current peak:
Earth leakage current:
0,82 mA
System Power [W]
260 mA
124
320 mA
150
Current [A] 260 mA
0,58
320 mA
0,68
Luminous Flux* [lm] 260 mA
13500
320 mA
16000
*Luminous flux for 4 000 K. Values shown are nominal values and are subject
to +/- 10 % tolerance. For latest values, ask for light distribution files.
84
230
892
16
62
PRO Wave® 180
PRO Wave 180
®
Leds: Weight: Dimensions (L x W x H): Easy LED driver:
Recommended installation height: 2 pcs
27 %
(common & diff ) 6 kV / 3 kA
2 A, t =10 ms (50 % of Ipeak)
Dimming minimum power level:
Surge protection (common & diff ):
Inrush current peak:
Earth leakage current:
180
9,5 kg
1016 x 230 x 81 mm
10–30 m
0,82 mA
System Power [W]
260 mA
149
320 mA
180
Current [A] 260 mA
0,70
320 mA
0,81
Luminous Flux* [lm] 260 mA
16200
320 mA
19200
*Luminous flux for 4 000 K. Values shown are nominal values and are subject
to +/- 10 % tolerance. For latest values, ask for light distribution files.
84
1017
230
62
easyled.fi
17
18
PRO Wave®
easyled.fi
Notes
easyled.fi
19
20
PRO Wave®
EASY LED – THE BRIGHT CHOICE
Easy LED Oy
Meriniitynkatu 11
FI-24100 Salo - Finland
p. +358 2 737 4420
easyled.fi
Rights for changes reserved © Easy LED Oy 2015
Investing in high quality led lighting is an investment that will pay off
now and in the future. Easy LED Oy is a Finnish company specialized in
energy efficient led lighting. We design and manufacture lighting systems
for industry, traffic, commerce and sports in Salo, southwest Finland.