1. No category

Western Tire Equipment and Supply Co., Inc.
.00
0
5
$2 ebateto
R -09
7-60-2-09
1
W
es
Coats
Rim Clamp
Tire Changer
Model 7065AX
NEW!
!
W
E
N
00
.
0
te
$10
a
b
Re -09 to
7-60-2-09
1
m
A LL
Summer/Fall 2009
Westesco,
Your
Automotive
Equipment
Specialist
te
co
scoGlobal.
Model 1175 Wheel Balancer
10 Balancing Modes. Automatic Distance
& Diameter Entry. Direct Tape-A-Weight
Placement. Auto Start Hood.
Clamps wheels 6” to 22”
externally, 8”-26” internally.
13” to 24” x-out clamps available.
Call for Cash Price!
Call for Cash Price!
Model#E12
Heavy-Duty Symmetric 2-Post Lift
Model#VS10
Versymmetric Two Post Lift
Asymmetric Application
Model#E10
Versymmetric Two Post Lift
Asymmetric Application
13’10” or 14’ 7” adjustable column height.
Heavy-Duty Telescoping Screw Pads. Padded
overhead shut off system. Single-point
mechanical lock release. Rubber door guards.
Premium powder coat finish.
Double Telescoping Screw Pads.
Single-point mechanical lock release system.
Wide rubber door guards protects vehicle
from door damage. Premium powder coat
finish provides long-lasting durability.
11’ 11-7/8” reduced standard height.
Double Telescoping Screw Pads.
Single-point mechanical lock release system.
Rubber door guards.
Premium powder coat finish.
12,000 lb. capacity
$4495.00
10,000 lb. capacity
$2795.00
10,000 lb. capacity
$2595.00
Stack Adapter Kit for 10K Two Post Lifts #10315
Includes (4) 3” Stack Extensions, (2) 6” Stack Extensions & (2) Organizer Racks with hardware.
$295.00
35 YearsWestescoGlobal.com
of Satisfied Customers
Carand
& Truck
Car
TruckLifts
Lifts
tion
alla ble
t
s
In aila
Av
g
6 Rollin
Two RJ cluded
Jacks In
FREE!
E
FREnd Van
lue
0.00 Va
a $294
FREE
ka
Truc aptersue
Ad 5.00 Val
d Truck
Van an
rs
Adapte
Bend-Pak Open Front Full
Service Alignment Rack
12,000 lb. Capacity
Model XR-12AE
7
Bend-Pak, Asymmetrical
10,000-lb. Capacity Two Post Lift
Model XPR-10AC $2680.00
Bend-Pak HD Truck Lift
12,000 lb. Capacity Two Post Lift
Model XPR12C
Lifting Height - 73” / Drive Through Clearance - 89”
Auto-level system, integrated rear slip plates, full
floating turn plates and Non- skid runways.
Model XPR-10ACX
$12,925.00
$2750.00
Lifting Height - 73” / Drive Through Clearance - 102”
Lifting Height Drive Through Clearance
a $2
74”
106”
$4545.00
g
7 Rollin
Two RJ cluded
In
s
k
c
Ja
FREE!
lue
0.00 Va
a $317
Lowest
Price of
the Year
Bend-Pak Low Rise Lift
6000 lb. Capacity
Maximum lifting height of 26in., 30in. with
lifting blocks.
LR-60
LR-60P(portable)
Bend-Pak
14,000 lb. Capacity 4 Post Lift
Model HD-14
Bend-Pak 14,000 lb. Capacity
4 Post Alignment Lift ETL Approved
Model HD-14LSX
Lifting Height
Overall Length
$1625.00
$1695.00
$7425.00
Challenger Portable mid-rise lift
6,000 lb capacity
Model MR6
Runways include rail-kit for optional accessories
Lifting Height
771∕₂”
Overall Length
235”
791∕₄”
235”
$3555.00
Challenger Versymmetric® Plus 2-Post Lift
10,000 lb capacity
Model CL10
Portable mid-rise lift with Heavy-Duty tow dolly.
7 locking positions. Electric motor mounted on
tow dolly. Single push button power unit with
release valve. Slip-on rubber pad adapter kit with
height extension. Sliding/rotating arm design.
3-stage front and rear arms. 11´ 8˝ standard
height. Double Telescoping Screw Pads. Singlepoint mechanical lock release system. Rubber
door guards protect vehicles from door damage.
$1975.00
$3495.00
Challenger Floor Plate Two Post Lift
9,000 lb capacity
Model CLFP9
3-stage front and rear arms. 10’ 7/8” overall
column height. Low profile drive-over floor
plate. 3-stage front + 3-stage rear arms. Dual
point mechanical pull-lock cable release system.
Premium powder coat finish. Ceiling Height
Required 10’ 1 7/8” (3096mm)
$3195.00
Model: BB-1 Pipe Bender
Tail Pipe Expanders
Model CTA2622
Std
Model CTA2624
Lrg 2 ¹/₈” X 3 ½”
$26.75
$44.00
1 ½” X 2 ½”
Tail Pipe Cutter
Model CTA2631
For pipes from ¾” to 3”.
31.75
Comes complete with quick
release bending and end finishing
dies. Includes high-speed
clampless swager and internal
expander. 3-inch bending
capacity: Dies Supplied 1-1/2”,
1-3/4”, 2”, 2-1/4”, 2-1/2”
Limited 2-year warranty.
$6390.00
Western Tire Equipment and Supply Co., Inc.
2
Call 800-985-6464 or 909-393-4880
WestescoGlobal.com
3 inch Die Package
Model 300-1
$1095.00
$980.00 with BB-1 Purchase!
3 inch Die Package
Model 300-2
$865.00
$765.00 with BB-1 Purchase!
Call now!
Tire Mounting/Balancing Equipment & Supplies
0
0.0te
$25
a
Reb-09 to
7-60-2-09
1
0
0.0te
$30
a
b
Re -09 to
7-60-2-09
1
Model 5065AX
Rim Clamp Tire Changer
Model 9024E
Rim Clamp Tire Change
Model 4050A
The Coats 9024E allows you to change tires
on oversized wheels. Clamps wheels 12” to
24” externally, 14” to 26” internally.
The Coats Model 4050A Center Post Tire
Changer is super fast and super powerful.
Call for Cash Price!
Call for Cash Price!
Model 5040A/E Rim Clamp®
Clamping Range
10” - 21” External. 12” - 24” Internal.
Call for Cash Price!
EW!
Automatic Distance & Diameter Entry.
Direct Tape-A-Weight Placement. Auto
Start Hood.
Call for Cash Price!
Water Black
Tire Paint
2183
TC26-7 $55.95
$25.95
Adapter Kits
Part#113428 Part#113593 Part#113594 Laser Guided Operation. Handles up to
30 inch rims and up to 44 inch diameter
assemblies. Direct Tape A Weight. Auto
Data Entry. Auto Start Hood.
8 Balancing Modes.
Call for Best Price!
Slick Tire Mounting Lubricant
Heavy Duty Tire & Tube
Mounting Compound
Rust Inhibitors, Non Toxic, Non
Flammable. 25 pounds.
0
0.0te
$50
a to
b
e
R -09
7-60-2-09
1
Model 1250
Model 875 Wheel Balancer
Call for Cash Price!
Water based lubricant for mounting &
dismounting of tires. 1 & 5 gallon sizes.
Concentrate. 4:1
5 Gallon
STML1
STML5
$6.75
$29.75
Glass Cleaner
64-1 Concentrated
3070 $27.50
50k
6030
3020
T68
$2.50
$26.00
$27.50
$10.75
$17.00
Wheel Weight Hammer
Rubber and Vinyl Dressing
Heavy Duty Degreaser
$420.00
$2450.00
$3250.00
Model XR1800
Ride Management System. 3-D Auto
Data Entry, Direct TAW location and easy
behind-the-spoke weight placement.
Real-time 3-D animated graphics.
Call for Cash Price!
Universal Mounting
Paste
#75 7.7 lb. $16.95
#75N Lo-profile$16.95
000491
Cotton Tire Swab
Call for Cash Price!
th c
wi basir
EE pte e
R
F da ag
a ck
pa
N
The Tire Changer
Platform for the Future!
Externally clamps wheels up to 30” or as
small as 9”. Integrated Wheel Lift, Rim
Diameter 9” thru 30” Outside Clamps. 11”
Thru 32” Inside Clamps. 16” Maximum
Tire Width, 44” Tire Diameter.
Clamps wheels 6” to 22” externally, 8”-26”
internally. 13” to 24” x-out clamps available!
Powerful 1.5 HP air drive system. Also available
with a 1 HP electric drive system.
0
0.0te
$25
a to
b
e
R -09
7-60-2-09
1
0
0.0te
$20
a
b
Re -09 to
7-60-2-09
1
Model
APX90E
Electric
Model
APX90A
Air
Tire Changer
0
0.0te
$20
a
b
Re -09 to
7-60-2-09
1
Mounting Paste
Brush #73
45° 1” brush head
$10.95
Mark All
Wheel Cover
Puller/Replacer
Solid Paint in a Stick
#MPSW White
#MPSY Yellow
$8.50
$9.00
Wheel Solutions
!
NEW
Nylon Mount/Demount Head
for 5000, 6000 & 7000 series
Quilted Clamp Sock
#183061
(10 pack)
Rim clamp tire changers.
#183604
$26.95
$36.50
Plastic Duckhead
for Model 9024E and APX
series tire changers.
#830084031
$36.85
5000/7000 X Clamps
#85606361 Fits Coats 50X, 60X, and
70X Series Rim Clamp Tire Changers.
Externally clamp wheels from 16” up to
and including 28” without damage.
$495.00
4” Extension Clamps
#185590 for 9024E and 9010E
Tire Changers. Clamps wheels
externally 28” on the 9024 and 24”
on the 9010.
$450.00
Coats Grip-Max
#85000758 (Set of 4)
Challenge: Damage-free clamping of
alloy wheels. Solution: Coats GripMax™ Laminated Clamps 3 Position
clamp allows for adjustments
covering a wide range of rim sizes.
Fits all Coats 50X, 70X, and APX
Rim-Clamp™ tire changers.
$460.00
Improved Light
Truck Front Cone Kit #113277C
40mm I.D., Double Sided Cone & Metal
Backing Plate, Range: 4.80”-6.80”
$325.00
Lube Bottle
#1062591 For Rim Clamps RC15,
$9.95
RC20, 5060 & 5070
#106572 For Models 4040,
$10.50
4040SA & 4050
RCD Gauge
#TG6002 Bolt pattern gauge
checker now verifies 4, 5, 6, and
8 lug bolt patterns.
$10.95
Thread Gauge Checker
Tape-A-Weight Scraper
$10.50
$6.70
#TG100
Western Tire Equipment and Supply Co., Inc.
Call 800-985-6464 or 909-393-4880
WestescoGlobal.com
#113390
Call now!
3
Air Tools / Sockets
ed
Limit ar
e
2 y nty
a
Warr
Our
Best
Seller
IR244A-2 Air Impact Wrench
IR231HA-2 Air Impact Wrench
$235.00
$149.95
1/2” Super Duty Extended Anvil.
1/2” Super Duty Extended Anvil. 500 ft.-lbs. torque.
ed
Limit ar
e
y
2
anty
Warr
IR2135QTiMAX
IR2135QTi-2MAX
$285.00
$295.00
1/2” Titanium Duty Air Impact Wrench,
Powerful and Quiet. 780 ft.-lbs. torque.
1/2” Titanium Duty Air Impact.
Wrench, Extended Anvil. 780 ft.-lbs. torque.
ed
Limit ar
e
2 y nty
a
Warr
IR285B-6 1’’ Impact Wrench
With 6’’ Extended Anvil. Ergonomic swept-back
side handle. Professional touch trigger. Adjustable
3-position power regulator. Robust 6-vane air motor
delivers 1,450 ft-lb. maximum torque
TIRE BUFFERS
IR2135Ti-2MAX
1/2” Titanium Ultra Duty Air Impact Wrench.
Featuring a 2” extended anvil. 780 ft.-lbs. torque.
$499.00
$265.00
Lever throttle for easy operation.
IR 327 high speed
IR327LS low speed
$66.75
$88.00
des
Incluee
Fr r
Cove
1/2’ Heavy Duty Air Impact Wrench.
Patented clutch provides smooth
operation and extreme durability.
$123.95
Air Impact Wrench 3/4” Super Duty.
Up to 1,100 ft.-lbs. of torque.
$430.00
NEW
CP7778-6
CP7733-2
IR261
CP772H
CP749-2
¾” Super Duty Air Impact Wrench.
4 positive power settings in forward
and ultimate power in reverse.
1/2’ Super Duty Air Impact Wrench.
2’ extended anvil for tire work.
$215.00
$349.00
1’’ Impact Wrench with 6’’ Extended
Anvil. 1,450 ft-lbs of ultimate torque.
High performance clutch. Highefficiency 6 vane motor. Bottom
exhaust. Three position power
regulator
$525.00
CP797-6
1”Super Duty Air Impact Wrench.
Includes 6” extended anvil for tire work.
Rocking dog clutch for smooth operation and
extreme durability.
$550.00
time
Life ranty
War
#9007
7 piece 1” Drive Wheel Service Set 4313S
13/16” Square 4040DT 1-1/4” T.W. Deep
4038R 1-3/16” (30mm) Std. 4033MD
33mm Deep 4034DT 1-1/16” T.W. Deep
4048D 1-1/2” (38mm) Deep 4036DT
1-1/8” T.W. Deep Molded Storage Case.
$150.00
#1512DM
30 piece ½” Drive Fractional &
Metric Set contains Fractional Deep
Sizes 7/16”, ½”, 9/16”, 5/8”, 11/16”,
¾”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”,
1-1/8”, 1-1/4”. Metric Deep Sizes 10
mm, 11mm, 12mm, 13mm, 14mm,
15mm, 16mm, ¾”, X 13/16” Flip
Socket, 19mm X 21mm Flip Socket,
3” extension, Molded Case.
#1500DW
12 Piece ½” Drive-Extra Thin Wall
Set for Wheel Service. Set contains ¾”
T.W., 13/16” T.W., 7/8” T.W., 1” T.W.,
1-1/16” T.W., ¾” X 13/16” T.W.
17mm T.W., 19mm T.W., 21mm T.W.,
22mm T.W., 23mm T.W., 19 mm X
21mm T.W. Molded Case.
$75.00
$145.00
#30235
Ken Tool ½” Drive Torque Limiting
Extension Set 5 piece set contains:
Torque ft./lbs.
65 Yellow
80
Blue
100
Gray
120
White
140
Aqua
$125.00
#02410A
15 pc ½” Drive Deep SAE
Impact Socket Set
Torq Impact Socket Set
SAE/MM
13/16”, 7/8”, 1”, 1-1/16”,
17mm, 19mm, and 22mm
$59.95
#4223C
1’’ Drive x 1-1/2’’ x 13/16’’ Square$37.75
#4235MC
1’’ Drive x 35mm x 17mm Square$33.50
#4238MC
1’’ Drive x 38mm x 20mm Square$37.75
#4241MC
#02477A
15 piece ½” Drive Deep SAE Impact
Socket Set. Set contains: 3/8”, 7/16”,
1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16” 7/8”,
15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4”,
Metal Case.
$49.95
#9154
#02400A
3 piece, 1/2” Drive Thin Wall Flip Impact
Socket set. Set includes; 3/4”x13/16”,
19mm x 21mm, 3” Extension Bar.
$19.95
8 piece 1” Drive Wheel Service Set
4313S 13/16” Square 4036DT 1-1/8”
T.W. Deep 4028R 7/8” Standard
4040DT 1-1/4” T.W. Deep 4032R 1”
Standard 4048D 1-1/2 Deep
4033M 33mm Standard Metal Storage
Case 4034DT 1-1/16” T.W. Deep.
$138.00
1’’ Drive x 41mm x 21mm Square$38.75
#02463A
15 Piece ½” Drive Deep Metric Set.
Set contains; 10 mm, 11mm, 12mm,
13mm, 14mm, 15mm, 17mm, 19mm,
21mm, 22mm, 24mm, 30mm, 32mm,
Metal Case.
$49.95
Western Tire Equipment and Supply Co., Inc.
4
Call 800-985-6464 or 909-393-4880
WestescoGlobal.com
½” Drive Thin Wall
“Flip” Sockets
#2146DT
#2192DT
#2346D
#2392D
¾” X 13/16”
19MM X 21MM
¾” X 13/16” 19MM X 21MM $8.25
$8.25
$8.25
$8.25
Call now!
Shop Essentials
FStaRrtuEpdeEKdit
FStaRrtuEpdeEKdit
Inclu
Vehicle Protection Supplies
Inclu
Steering Wheel
Cover
Seat Covers
$45.50
$42.95
#30-002
Qty. 500
#10-005
500 Per Roll
Plastic Floor Mats
#20-000
$34.50
Electric Driven Compressors
2475N5 - 5hp
80 gal
2475N7.5 - 7.5hp 80 gal
Tire Bags
Type-30 Truck Mount Compressors
100% continuous duty for tough applications.
Includes motor starter, oil sight glass (10-15 HP
only), manual drain and ASME tank.
Two-stage design offers extended pump life
for long life. 175 PSI maximum operating
pressure. F-Series includes electronic ignition
and idle engine control. 100% duty cycle.
$1695.00
$2095.00
Paper Floor Mats
#41-110
100 Per Case
#FM-3
$27.95
2475F12.5G - 13hp 30 gal. $2075.00
Qty. 500
$39.95
Qty. 500
1/2” x 50’ Hose Reel
Electric Startup Kit
#32305880
$99.95
Free with compressor purchase!
Compressor Pads
#VT800
$10.00
Synthetic Brake &
Caliper Grease
#SL3303 Synthetic Brake &
Caliper. Grease
12 Ounce Tub With Brush.
$14.95
Johnsen’s
VOC Compliant NonChlorinated
Brake Parts Cleaner
Recoil Nylon Air Hose
#6127 ¹/4” x 12’, ¹/4” Swivel fittings $10.95
#6127A ¹/4” x 25’, ¹/4” Swivel fittings $17.95
#6127B ¹/4” x 50’, ¹/4” Swivel fittings $24.50
Quickly removes all types
of inks, paints, oil, grease,
tar.
$29.95
Nitrile Chemical
Resistant Gloves
#PTN 880 Protects hands
sensitive to latex.
$10.95
GL-5 Heavy Duty
Gear oil
#SL2432
1 Quart Bottle.
Disc Brake Quiet
$6.50
#5017
12 Ounce Aerosol
Case of 12$47.50
Case Quantity Only
Compressor Oil
#SL22133
SAE 30
$16.95
Clean-R-Carb™
Carburetor Cleaner
#5079
16 Ounce Aerosol
Case of 12$27.75
Case Quantity Only
$159.95
3/8 x 50’ Hose
#3688 250psi rated
#SWA 3/8 x 50 $39.95
#SWA 1/2 x 50 $48.00
3/8” x 50’ Hose Reel
$150.00
50’ Reinforced Air Hose with 1/4”
NPT Male Ends. 3/8” Hose ID.
Gas Startup Kit
#32305872
$109.00
Free with compressor purchase!
Loyal™ Heavy Duty
Waterless Hand
Cleaner #1019
#2417
Case of 12 $23.00
#3689 250psi rated
Hydraulic & Jack Oil
#SL2552
1 Quart Bottle.
$ 4.95
Couplers & Nipples Tru-Flate Type
¼” Coupler, ¼” NPTM #3503
¼” Coupler, ¼” NPTF #3504
¼” Nipple, ¼” NPTM #3506
¼” Nipple, ¼” NPTF #3507
½” Coupler, ½” NPTM #3511
½” Coupler, ½” NPTF #3512
½” Nipple, ½ NPTM #3513
½” Nipple, ½ NPTF #3514
$3.75ea
$3.75ea
$ .95ea
$ .95ea
$8.75ea
$9.25ea
$3.50ea
$3.50ea
Sanding Pads
2” 36 Grit Sanding Pads
#2R036
$28.50
3” 36 Grit Sanding Pads
#3R036 $29.50
Surface Prep Pads
2” Surface Prep Pads Med. Grit
#50M
$34.50
3” Surface Prep Pads Med. Grit
#25M
$30.00
Regulator (Standard)
Reg 25 ¼”Body Size
Reg 38 3/8”Body Size
Reg 50 ½”Body Size
Reg 75 ¾”Body Size
¼” Port Size
¼” Port Size
½” Port Size
¾” Port Size
$27.00
$47.00
$45.00
$72.95
Standard Hose Crimper
Filter (Standard)
Fil 25 3/8” Body Size
Fil 38 3/8” Body Size
Fil 50 ½” Body Size
Fil 75 ½” Body Size
¼” Port Size
¼” Port Size
½” Port Size
¾” Port Size
$34.95
$40.00
$48.25
$56.00
Lubricator (Oil Fog) Standard
Lub 25 3/8” Body Size ¼” Port Size
Lub 38 3/8” Body Size ¼” Port Size
Lub 50 ½” Body Size ½” Port Size
Lub 75 ½” Body Size ¾” Port Size
$47.50
$47.00
$57.50
$89.50
#855K
This kit is complete with standard crimper, ferrules, hose
barbs, splicers, and directions
needed to make up hoses in
the field. Kit Contains:
10 Hose Barbs
10 Hose Splices
20 Ferrules
1
Standard Crimper
Western Tire Equipment and Supply Co., Inc.
Call 800-985-6464 or 909-393-4880
WestescoGlobal.com
#855
Includes five dies for crimping
1/4” braid to 3/8” double
braided hose.
$120.00
Hose Crimping Kit
$265.00
Call now!
5
Brake Lathes/Alignment & Accessories
0
0.0te
$50
a to
b
e
R -09
7-60-2-09
1
0
0.0te
$50
a
b
Re -09 to
7-60-2-09
1
the s
te one
ina
rC
m
o
i
f
El ed
Ne
Proven Performance, Legendary Reliability
with One Pass Machining One Pass Finishes.
Positive Rake Tool Bits. Forged Alloy Steel
Arbor. Rigid 44-Pound Spindle Patented
Floating Spindle Design.
Call for Cash price!
#900001
$785.00
al
Lociveryp
l -u
Ded Setded
NEW
Model 4000B-SP
Single Pass Disc/Drum
Kit A
Double Chuck Adapter #41412
Double Chuck Adapter Set.
1” I.D., Range: 2.125-5.750 Hubless
Rotors & Drums through 1 Ton Vehicles.
Includes Double Chuck, 4 Backing Plates,
Chuck Key, Instruction Sheet.
$975.00
Kit B
annclu
I
Model 4000B
Combination Brake
#900002
$975.00
The industry standard, to which all other bench
brake lathes, are compared. Must be ordered
with either an “A”, “B”, “C” or “E” adapter kit.
Kit C
#900003
Call for Cash price!
$1650.00
Optional Bench #2500
$425.00
Kit E
#900006
$1495.00
Carbide Insert/negative rake Silencer Band #6921
Non-Vented Rotor
6.500” Diameter – Package of 2.
#6914-10
(10 pack) Ammco Lathes.
$6.75
$25.00
Adapter Set - Double
Taper - Truck
Boot - Spindle
Polyethylene
From 2.828” To 3.560”. 
Use With #23682 Spindle Ring.  Disc Rotor Silencer Band.
#9233 Fits Bearing Race Diameters
e
s
On Kit I d
ple Nee
m
i
S You
All
$275.00
#3085 For Models 3000, 4000
$18.25
Silencer Bands
Disc Rotor Silencer Band Drum
#5280
#6920
1 3/4” Drums
$27.25
2 3/4” Truck Drums.
$37.75
#5290
$19.85
WESTESCO Carries A Complete Line of AMMCO Parts and Accessories
Quick Chuck Adaptor#70040
Standard set includes: Quick Chuck Adaptor,
Standard Backing Plate and Wrench.
Optional Accessories Available:
$425.00
Large Jaw Set
Small Backing Plate
Large Backing Plate
Toyota Backing Plate
$105.00
$115.00
$105.00
$105.00
#70041
#70047 - 4.25” O.D.
#70046 - 7.25” O.D.
#70054 - 6.25” O.D.
Dodge/Chevy 4 X4
F150 ½ & ¾ ton (4x2) Rotor Rotor Adapter#70080
Adapter #70070
¾ and 1 Ton
$150.00
Model BL8944L
Professional
Multi-Speed
Brake Lathe
BOSCH
BOSCH
Swing Arm
Tire Changers
26” Outside clamping
capacity standard.
Three-position adjustable
bead-breaker
accommodates large
wheels and tires.
Features adjustable
non-opposing jaws
with inflation jets.
TC 326SFA
$6650.00
$225.00
Infinitely adjustable
rotor feed speed,
.001” to .010”.
Three easily selectable
arbor speeds, 100,
150, 200.
Positive rake, one
pass, finishing
capability.
One HP externally
mounted motor
drives arbor only.
Solid Aluminum
Wheel Aligner
New digital 20° CCD
cameras with extended
toe measuring range
and integrated camber
pendulum. 8-sensor system
is a permanent calibration
monitoring system.
Additional measurements
such as wheel offset, axle
offset and track width
difference. Exceptional high
accuracy and repeatability.
$5950.00
WA 2600-8R
Above Lathe Requires the purchase
of one adapter package listed below
$16,940.00
Call for Special Pricing on Adapter Packages
Platinum Group
Covers up to most
1 Ton Vehicles.
Model 8040
Gold Group
Covers up to most
1/2 Ton Vehicles.
Model 8030
Silver Group
Covers Most Passenger
Auto including Composites.
Model 8020
Western Tire Equipment and Supply Co., Inc.
6
Call 800-985-6464 or 909-393-4880
WestescoGlobal.com
Bronze Group
Covers Most Auto Passenger.
Model 8010
Call now!
Tire Handling / Shop Equipment
for
T
US yee
A Mmplo ty
e afe
S
Model T106
$350.00
Model T102
$430.00
Model T105
$560.00
3 Bar Truck Handles tires up thru
11.00-22. (47” diameter)
TC Tire Cart
4 Bar Truck Handles tires up thru
19.5-22.5 (50” diameter)
$550.00
Passenger and Light
Truck Tire Spreader.
Strut Spring Compressor.
Handles 13” thru 16.5” rim
diameter.
Wall-mount brackets are
standard.
Model 5030
Handles 20” thru 37” outside
diameter tires.
$395.00
Air-Powered Tire Spreader
Model 7400
Model 5120
$625.00
$1395.00
Adjustable spread hooks with springloaded pins. Foot control valve for
spreading the tire.
5 Bar Truck Handles tires up thru
12.00-24. (50” diameter)
Foldable Shop Crane
2-ton Capacity
2-1/4 Ton Capacity Floor Jack
#71232 3-3/4” low lift height.
$215.00
Hydraulic Press
#20401
Hydraulic Press - 20 Ton Capacity
Arbor plates included. Meets ANSI
standard for performance and safety.
#20153
Folds for easy storage.
Double Pump
$235.00
$295.00
25-Gallon Steel Gas Caddy
24 Gallon Air Operated Waste
Oil Drainer
#7355
Suitable to drain waste oil from engines,
gear boxes and differentials of all vehicles.
Center mounted adjustable collecting bowl.
Adjustable collecting bowl height.
$350.00
#JDI-25GC
8-Gallon Rolling Oil Drain
#RD-8G
Adjustable from 45” to 72”.
$85.00
Heavy Duty Pump Complies
with OSHA guidelines. Heavy duty
FM Approved cast iron pump.
Pump has two-way operation for
either siphoning or dispensing.
Pumps 1 gallon for every 12
revolutions
$625.00
16 Gallon H.D. Steel Tank Heavy Duty Work Table
#JDI-16DC-E
Positive height adjustment from
50” to 70”. Built-in sight tube shows
fluid level. Drain valve included.
Two 4” swivel caster and two 6”
fixed wheels
$250.00
#ATD-7007
Overall: 28-1/2” W x 19-7/8” D
Table height adjusts from
34” to 47-3/4”. (4) 2” swivel
casters make this work table
extremely mobile
$99.95
ENGINE STAND
2000 LBS. CAPACITY
3 Ton Double Plunger
Floor Jack
#20820
#20286B
Working Range 32”.
6 casters, 4 adjustable arms
and 360º rotation.
Min. Saddle Height: 4.5”
Max. Saddle Height: 21”
$150.00
$160.00
22-Gallon Oil
Change Station
#JDI-22DCX
Built-in filter drains easily holds 4 to 5
standard automotive filters. Molded tool
pocket keeps wrenches, pliers and other
tools readily accessible. 2” port opening
allows easy access from the top of the drain
for oil evacuation.
$425.00
Vehicle Position Jack
Cool-Tech
#34788
Fully automatic function lets
you recover, vacuum, leak test,
charge, and then walk away.
$3375.00
#ATD-7465
1,500 lbs. Hydraulic.
Use on vehicles weighing up to
6,000 lbs. (4 jacks) Max Weight:
1,500 lbs. per Jack
Tire Capacity: up to 12” Wide
$139.95
Heavy Duty Plastic 2
Shelf Utility Cart
#8330 Trays are 3-1/2” deep
and can hold up to 300lbs.
Size: 16”(W) x 30”(L) x 31”(H)
$85.00
Western Tire Equipment and Supply Co., Inc.
Call 800-985-6464 or 909-393-4880
WestescoGlobal.com
New!!!
3 Ton Aluminum
Floor Jack
#20272B
Double Plunger.
Working Range;
3.5” - 19.25”
$260.00
2-Shelf Service Cart
With 2-Drawer Chest
#ATD-7033
Locking lid and 2-drawer chest.
(4) Heavy-duty swivel casters
(2 lockable).
$325.00
Call now!
7
Passenger/Truck Valve Stems and Essentials Around the Shop
Eicky Valves
Part No.
Desc.
Price
Part No.
Description
Price
Part No.
Pieces/each
CTV413R
CTV418R
CTV415
CTV423
TR413
TR418
TR415
TR423
$75.00/500
$95.00/500
$6.00/25
$6.50/25
600HP
High Pressure
$.65
TV-6010
TV-6020
$1.25
$1.65
•Minimum Order 50 Pieces
•Minimum Order 50 Pieces
Part No.
Description
Price
413SC
418SC
Chrome Valve Stem
Chrome Valve Stem
$.39
$.59
Clamp-In Brass Truck Valves
Part No.
Pieces/ea
TR-501
TR-570
TR-571
TR-572
TR-573
OGK
$1.70
$1.75
$1.85
$1.95
$1.99
$2.50
Metric Clamp-In Valves
•Minimum Order 50 Pieces
Aluminum Wheel Truck Valves
Part No.
Pieces/each
TR-509
TR-510
$3.75
$3.95
Part No.
Pieces/each
TR-544D
TR-545D
$2.72 ea
$2.72 ea
•Minimum Order 10 Pieces
Call for quantity discounts on
all of our truck valve stems
•Minimum Order 10 Pieces
•Minimum Order 10 Pieces
Westesco carries a complete line of HALTEC LARGE BORE VALVES AND Accessories for all your needs.
Haltec Inflator
Alcoa Stabilizer & Extension Kit #245392
#I405-6M
3 foot length With Clip-on Air Chuck.
Available in 9 sizes. Each stabilizer kit
contains 2 stabilizers and 2 extensions.
Haltec Inflator
Single Bend Swivel valves
$44.25
Call For Pricing
#WH-45-6
Any other lengths can be ordered all valves equipped
with core and hex cap
#I405-12LOM
12 foot length With Lock-on Air Chuck.
Service Packs and TPMS Replacement Sensors
$52.75
Original-equipment specifications require that new grommets, nuts, valve cores and caps
be installed every time a tire equipped with TPMS is removed and replaced on a wheel rim.
Service packs packaged individually.
$10.50
Tubeless spud #H41
Used with all Large Bore swivel valves.
Fits 13/16” rim hole.
Westesco carries a complete inventory of
OE Service Packs and TPMS Sensors.
WH-45-6 with PT grooves and O-rings
#PT-45-6
$12.95
$1.95
Tire Pressure Monitor Tool Kit
#3833CS Designed to be a complete,
universal kit covering vehicles with a Tire
Pressure Monitoring System (TPMS).
Carries a 3-year warranty. Kit includes
TPM tool, magnet, a blow molded case,
and printed manuals, Volumes One, Two,
and Three.
$525.00
TPMS Replacement Parts Kit
Truck Extension
#7381
#7382
3-1/16” Length
5-1/16” Length
$125.00
$6.50
$7.25
$12.65
Overall length 3”.
#7657
$1.69
#GA 160
Straight-on 30° Reverse.
#AC18
Tread Depth Gauge
$2.75
Vacula Valve Core Torque Tool
Valve Core Tool #5411
Valve Finishing Tool
$3.00 ea
$3.60
Standard Bore Air Chuck
Valve Cores
Straignt-on and 30° reverse angle chuck.
Lock-on.
High Temperature, Heat Resistant, Tested
300 PSI working pressure. 100 per box.
$16.95
Replacement Clip
#22100
$1.75
Replacement Cradle
#22101
$9.00
Universal Band
#22102
Fits Rims 14-26”
$15.95
#410419 $6.95
Air Chuck
$8.25
Installs and removes
standard valve cores.
#6999L
$8.00
Straight-On Inflator Gauge
#3500D
12” Hose, 10 to 120 PSI
#353A
$29.95
Swivel Dual Foot Inflator Gauge
#3500AD
#100HA
$.75
$37.00
Air Gauges
Valve Insert/ Remove Tools
Double Seal Cap
#DS-1 Allows for inflation
& deflation of tire without
removing the cap.
12” Hose, 10 to 120 PSI
$17.00
#992
#50117
Western Tire Equipment and Supply Co., Inc.
8
$8.50
Closed Type
European-Style Clip-On
#599
For liquid fill tires.
cores to specifications for TPMS valves with
sensors.
$8.50
Open Type
Lock-On Air Chuck
Water Adapter #5791C
#20141 This new tool safely tightens tire valve
Lock-On Air Chuck
#AC18F
$9.95
GM sensors with snap-in valve stems are
connected to the valve stem with a torx screw.
This screw must be torqued to it’s proper setting.
$29.95
#1688
$2.25
Dual Foot Truck High Pressure Gauge
Valve Core Tool/Deflator
Torque Tool
#20140
Standard Bore Valve Core Tool
#7188BH
#17-21300
Contains 124 TPMS Sensor Replacement Kits for:
Chrysler, Ford, GM, Honda, Hyundai,
Lexus, Mazda, Mercedes-Benz, Nissan,
Toyota, Volkswagen
Dual Angel-Foot Service Gauge
$6.75
$8.50
Call 800-985-6464 or 909-393-4880
WestescoGlobal.com
#8101A
$2.95
#8102A
$5.95
Call now!
Tire Repair Supplies
Bead Sealer
#14-101
32 oz. Bead Sealer, Flammable
$12.50
#14-008 8 oz. Vulcanizing
Cement, Flammable.
#14-032 32 oz. Vulcanizing
Cement, Flammable.
4” Radial Inserts
#12-361 7 1/4” Radial Inserts
#12-370 #960
Rim/Bead Sealer 32 oz. Brush Top Can
$8.20
#BL-8
8 oz. Brush Top Can #BL-32
32 oz. Can $6.95
$16.50
#76
Repair Sealant, 16 oz. Brush Top Can
$33.50
Radial 100 Series Repair Units
Injury
Size
Price
/Box
Part #
$8.50
$27.75
#205 Cold Vulcanizing Fluid, 1 Gal. Can $95.00
#203 Cold Vulcanizing Fluid, 8oz.can
#204 Cold Vulcanizing Fluid, 32oz. Can
Tread and Shoulder Injuries
Used with Rema’s Special Blue Cement.
Qty/
Case
$15.95
Cold Vulcanizing Fluid
Rema Tip Top’s Pre-Buff Cleaner dissolves moldrelease lubricants and loosens other contaminants.
#71 - 32 oz.
$8.25ea
#70 - 8oz. Spray Can (12/case)
$8.25ea
$8.95
$14.50
Repair Sealant
$9.75
Pre-Buff Cleaner
$10.00
Uniseal Tire Repair Units
Description
Rim/Bead Sealer
Blue Cement
Vulcanizing Cement
$15.95
#14-100
32 oz. Buffing Solution, Flammable.
#738
$12.65
Buffing Solution
Chem. Vulcanizing Fluid, FastDry
$7.00
#760 8oz
#761 Quart
$20.75
Part
No.
Security Coat 16 Oz
Bead Sealer Quart
#735
Description
Ply
Units
/box
Price/
Box
Part #
Description
Ply
Units
/box
Price/
Box
249W UniSeal plus with wire
25
1/16”
$26.50
RAD-110
2x2-3/4
1
20
$33.65
VX-1
1-3/4”
1
30
$12.95
250UL UniSeal UltraGum/Wire
14
1/8”
$20.60
RAD-112
2-3/8x4-1/8
1
10
$33.65
VX-2
2”
2
20
$14.95
251UL UniSeal UltraGum/Wire
12
1/4”
$23.50
RAD-114
3x4-3/4
1
10
$39.50
RAD-120
4-7/8x3
2
10
$41.25
Radial Repair Units
Bias Repair Units
Part #
Description
Ply
Description
Ply
Units
/box
Price/
Box
XRP-10
2-1/8x3
1
45
$38.70
XRP-12
2-3/4x4-1/2
1
30
$51.90
3-3/8x5-1/8
1
20
$40.40
Part #
Designed specifically for nail hole
repair of Bias Ply Tires. Use with
Rema’s Special Blue Cement.
Units
/box
Price/
Case
Centech Radial Repair Systems
Description
Units
/box
Size
Price/
Case
XRP-14
PN-0
1-1/4”
1
50
$38.95
Part
#
XRP20
3-1/8x4-7/8”
2
25
$53.00
PN-1
2-1/2”
1
30
$24.50
165
CT-10 box
20
1-3/4”x3”
$20.50
XRP22
3x6-7/8
2
15
$43.95
PN-2
3-1/4”
2
20
$28.00
165T
CT-10 tub
80
1-3/4”x3”
$75.50
XRP24
3x6-5/8
2
30
$107.70
PN-3
4”
2
10
$23.25
167
CT-12 box
10
2-3/8”x4-3/8”
$21.95
XRP40
3-7/8x7-5/8
3
10
$48.60
PN-4
5-3/4”
3
10
$42.25
167T
CT-12 tub
40
2-3/8”x4-3/8”
$82.50
XRP42
5-1/8x10-1/4
4
8
$50.80
Radial Repair Patches - Bulk
Part
No.
Description
Radial Repair Patches
Units
/box
Tube and Tire Repair Patches
Price
/Box
Part
No.
Description
Qty
/Case
Price
/Box
Part
No.
Description
Qty
/Case
Price
/Box
$11.60
PAT R100
1-3/4”
1000
$95.00
601
1-3/4”
40
$6.80
301
1-5/8”
145
PAT R200
2-1/4”
1000
$110.00
602
2-1/4”
50
$11.00
302
2-1/8”
50
$ 7.80
PAT R300
3-1/8”
500
$95.00
603
3-1/8”
50
$19.60
303
3-1/8”
50
$11.50
Round All Purpose Repairs
Lead Wire Combo units
Tube & Tire Repair / Bulk Patches
Part #
Length
Stem
Diameter
Units
/box
Price/
Box
Part #
Description
Units
/box
Size
Price/
Box
Part #
Description
Ply
Units
/box
Price/
Box
PAT 13-670
1”
1/8”
20
$15.95
111
Round All Purpose
50
2-1/2”
$41.95
PAT B000
1”
1/8
1000
$38.00
PAT 13-673
2”
5/16”
24
$24.00
113
Round All Purpose
50
3”
$53.95
PAT B100
1-5/8
1/4
1000
$60.00
PAT 13-674
2”
3/8”
24
$25.95
115T
Square All Purpose
100
1-3/4”
$37.50
PAT B200
2-1/8
5/16
1000
$85.00
WESQSR1
1-3/4”
1/4”
24
$18.95
116T
Square All Purpose
80
2-1/4”
$44.00
PAT B300
3-1/8”
3/8
500
$85.00
Western Tire Equipment and Supply Co., Inc.
Call 800-985-6464 or 909-393-4880
WestescoGlobal.com
Call now!
9
Hand Tools
Power Rasp
#14-303
With Screwdriver Handle
Large Brass
Sidewall Tire Brush
$14.50
$4.95
#CC2 Ball bearing stitcher, 1” x 1/8” $8.75
#CD4 Ball bearing stitcher, 2” x 1/4” $16.95
Chrome “T” Handle
Power-Awl w/ Screwdriver Handle
Die Cast T-Handle
End Slot Needle
#14-217
2 Stage, Knurled Probe
#TCW
Heavy Duty unit holds approximately 16
tires. Dim. 6’ X 1’ 6” X 6”
#X2T
$6.50
$7.75
$10.50
14-343 ¹/8” Pointed Burr
14-344 ¹/4” Pointed Burr
14-345 ³/16” Carbide Cutter
14-346 ⁷/32” Carbide Cutter
14-347 ⁵/16” Pointed Carb. Cutter
$12.00
$24.45
$36.80
$40.50
$57.00
#210CR602” Dome Economy Buffing Wheel, 60 grit $14.85
#RH108 2 1/2” Cup Carbide Buffing Wheel, 60 grit $26.00
#RH111 2 1/2” Cup Carbide Buffing Wheel, 36 grit $26.00
$265.00
Rigid, tapered skiving knife.
Carbide Cutters
Flexible Skiving Knife
#X2RF
Flexible round point Blade.
Wheel Stud Removers
$8.75
#40113 Tork Out Type 3/4”
#40114 Tork Out Type 5/8”
$39.95
$39.90
Rubber Scrapper
$5.00
#14-315H
For cleaning inner liner prior to buffing
$6.75
Pistol Grip
Insert Needle
#14-216
No-Mar Rim Guard
Quick Change Adapters
$5.95 14-331 w/ Spacer, 1” x 3/8” threads $6.25
14-332 ¹/8” (3.2mm) shank
$4.50
14-333 ³/16” (4.8mm) shank
$4.50
14-334 ¹/4” (6.3mm) shank
$4.50
14-335 ⁵/16” (7.9mm) shank
$4.50
TNT Tool
#TNT 100
Tire Changing Tool. Mount all Tubeless
Tires. 17.5” thru 24.5”. Demounts Tires
in 8 Seconds. Remounts in 20 Seconds
without strain.
$595.00
Tubeless Bead Expanders
“O”- Ring Type
#20200 Rim Size 16.5”-17.5”
#20202 Rim Size 19.5”
#20204 Rim Size 22.5”-24.5”
$22.00
$23.75
$25.50
$3.95
$3.95
Portable Tire Rack
Rigid Skiving Knife
Pistol Grip
#14-211
#BC-1 2 ½”
#BC-2 2 ” #WSB
Hand Stitcher
#14-310
Tungsten Buffing Wheels
#TG500
Protects aluminum, chrome and
painted truck rim/wheels.
Rib Nut Stud Removal Kit
$6.95
#40100
For removing damaged 1-1/8” Budd
wheel inner cap nuts, ¾” and 5/8” lug
Radial Hand Rasp and Awls
#190 Awl
$ 4.97
#6003T Radial Hand Rasp ¼” for trk tires $25.85
#6003 Radial Hand Rasp ¼”
$25.85
#TY 2” Encapsulated Wire Brush
#6056 3” Encapsulated Wire Brush
$13.25
$19.50
#2503 2 ½” Dia. 1/4’” width 16 Grit
$5.45
#2204 2” Dia. 3/16” Width 16 Grit
#2205 2” Dia. 3/16” Width 32 Grit
#2206 2” dia. ¼” Width 16 Grit
$9.75
$9.75
$10.50
#2212 2” Dia. ¾” Width 16Grit
$12.95
#WB3F 2 ½” coarse Wire Wheel
$8.00
#S-879 1 5/8” Mushroom Stone, White
$1.95
$94.50
3 Piece Emergency Lug
Nut Remover Socket Set
#CTAA157
Fits up to 1 1/8”/28mm
Use with impact wrench.
$23.95
Tubeless Tire and Tube
Test Tank
Detects air leaks in tubes and tubeless tires.
31” X 12” X 12”.
$48.95
#Huf 5-3109
Extra Large Model
#Huf 5-3109XL
$75.00
Ken-Tools’ original design offers one piece construction, and assures long life for applications.
Cap Nut Wrenches (Porkchop)
#TX9
SAE 1 ½”
#75k
#TX10
Wheel Weight Hammers
$21.95
Metric 35mm
#TX12
Metric 41mm
#TG11D Fiberglass Handled
18” (46 cm) 4.8 lbs (2.2 kg)
$73.50
#T56
$50.50
4.8 lbs (2.2 kg)
#OK 333T
$3.00
#881M
$3.95
Metric Two Piece 38 mm Hex
#T45A Tubeless Style Tire Iron. 37” (94 cm) • 3/4” (19 mm) • 4.6 lbs (2.1 kg)
$47.50
#T57
17” (43 cm)
Disc Wheel Nuts (Flanged Cap Nuts)
Metric Two Piece 33 mm Hex
17mm - 19mm - 21mm - 22mm
20” (51 cm) • 5/8” (16 mm)
4 lbs (1.8 kg)
$35.50
#T11D Wood Handled
$14.95
$14.95
$14.95
Westesco carries a large
selection of Inner and Outer
Cap Nuts and Wheel Nuts.
3/4” - 13/16” - 7/8” - 15/16”
23”(58 cm) • 5/8”(16 mm)
4.5 lbs (2.0 kg)
$39.75
#T46A Straight Mount/Demount Tool. 36” (91 cm) • 3/4” (19 mm) • 4.5 lbs (2.0 kg)
Outer Cap Nuts
#37891 Right Outer
#37892 Left Outer
$.90
$.90
45.75
#TG11E Fiberglass Handled
32” (81 cm)
9.1 lbs (4.1 kg)
$86.50
TG11EH Replacement Handle
$39.50
#T11E Wood Handled
30” (46 cm) 9.2 lbs (4.2 kg)
$74.95
T11EH Replacement Handle
$19.95
Inner Cap Nuts
#T-67 Wheel cover puller/replacer. Professional Grade.
$29.50
Western Tire Equipment and Supply Co., Inc.
10
Call 800-985-6464 or 909-393-4880
WestescoGlobal.com
(steel inside, aluminum outside)
#22621
#22622
Right Inner
Left Inner
Call now!
$2.95
$2.95
Shop Supplies
“Combi” Tire Bead Breaker
NIEKO Air Hydraulic Jack
Norco Bottle Jacks
#76512 12 ton
#76520 20 ton
$95.00
$150.00
22 Ton Capacity Air Over Jack
with Quick Springs #AJ22FC
Compact and Portable .
$425.00
#31008B
Complete with 4 Saddle Extensions
Min. Saddle Height: 9” Without
Adaptor. 4 ½” Stroke.
$395.00
For ALL Agricultural, Truck and
construction vehicles. Works on all Single
Piece- 2 piece- 3 piece Rim/Wheels.
#10101 $650.00
Air Hydraulic Pump
5 Quart Capacity 10,000 p.s.i. hydraulic
pressure. All metal air motor.
#10592 $405.00
NIEKO Air Bottle Jacks
20 Ton #31009L Low Profile
$119.95
50 ton #31013L Low Profile
$275.00
NEW
Cool-Tech
NIEKO
10 Ton Floor Jack
#20291B
Working Range: 6.7” to 22.45”
$595.00
#34288
It recovers, recycles, evacuates, leak
tests, and recharges R-134A. Meets
SAE J-2788 standards for accuracy:
95% refrigerant recovery and
charging to +/- 1/2 oz.
$2695.00
Powerbuilt
3 Ton Low Profile Jack
#647580
3 ½” To 21 ¼” lifting range.
$225.00
Cheetah Bead Seater
#CH-5
This Cheetah bead seater has a
5 gallon steel tank. Additional
packages and options available.
$329.95
NIEKO
5 Ton Capacity
Hydraulic Floor Jack
#20290B
Working Range:
6.3” to 22”
$450.00
E
FRE under
nd
ton
3/4 ist sta
ho
Parts Washer
NIEKO
#10381
Parts Washer - Electric,
20 Gallon Capacity.
$150.00
#RS500
Load Capacity 500 lbs. / 227 kgs. Cycle
Timer 0-60 minutes Pump Output
75psi @ 70 gpm Water Temperature
0° - 190° Fahrenheit Tank Capacity 50
Gallons Removable Parts Tree.
$2825.00
1⁄2 Ton Telescoping
Transmission Jack
1-1/2 Ton Capacity
$575.00
$98.00
#5075
#81035A
6 different height positions.
Jack Stands
3 and 6 Ton Capacity. Extra heavy
duty. Sold in pairs only
$23.95
#20855-3ton
#20856-6ton
$46.95
Kwikstart
#6225
250 Cranking Amps,
1000 Peak Amps.
$100.00
90 Bin Parts
Organizer Cart w/ Tool Tray
#53015L
• Height: 39”
• Total 450 lb Capacity
• Tool Tray: 26.4”x22.4”x2”
• 4pc 3” Rubber Swivel Casters
$125.95
Associated Fast Charger
#6012
6/12 Volt Safe in any weather.
250 Cranking amps.
$335.00
Kwikstart
#6250
360 Cranking Amps,
1650 Peak Amps.
$139.00
Under Hoist Stand
1/2 Ton Capacity
Spare Tire Tool Kit
$65.00
$95.00
#2262B
Adjustable from 56 ¼” 74 ”
Western Tire Equipment and Supply Co., Inc.
Call 800-985-6464 or 909-393-4880
WestescoGlobal.com
#4350
6 tools w/hand crank
and wall rack.
Call now!
11
Western Tire Equipment and Supply Co., Inc.
New L.A.
Warehouse
Location
to Better
Serve You!
W
es
Will call Hours; 8:00am - 12:00pm and 1:00pm - 5:00pm. Monday through Friday
Model R26EX
The Easiest Way to Change Low Profiles, Run Flats
and Alloy Wheels.
Internal Clamping Capacity
14-1/2” – 28”
External Clamping Capacity
12-1/2” – 26”
Maximum Tire Diameter 47”
$4995.00
Model RL4500B Brake Lathe
The RL4500 complete lathe package is an
excellent value that includes lathe, bench,
adapters, and other helpful accessories.
$4150.00
Ranger Model DST-1200
Digital Sensor Technology
Dynamic, Static, and a Alloy Capability
Six-Second Cycle Time, Six Difference Balancing
Modes, Self-Calibration Program.
$1450.00
NEW!
m
A LL
te
co
scoGlobal.
Ranger Model RX950AT
Rim-Clamp Tire Changer
Electric/Air Motor 11/₂ hp (110/220VAC 50-60 HZ)
Internal Clamping Capacity 121/₂” – 22”
External Clamping Capacity 111/₂” – 21”
Turntable Tire Width Capacity (Mounting) 3” – 14”
Maximum Tire Diameter 50” (1270 mm)
$2375.00
There is growing concern of lead wheel weights and lead’s effects on the environment.
Under Proposition 65 in the State of California you should cease using, installing, selling or distributing in California wheel balancing weights that
contain any lead, no matter who manufactured the weights, before December 31, 2009. Otherwise you risk being sued under Proposition 65.
LEAD-FREE Wheel Weights Available Now From WESTESCO. Contact your local Westesco Salesman for all your wheel weight needs.
Terms and Conditions of Sale
Some items have limited quantities and are only available while supplies last. Prices shown are for a limited time and are subject to change without notice.
Applicable state and local taxes will be added to all equipment purchases and leases. Minimum order is $100.00. All leases and lease terms are subject to credit
approval. WESTESCO is not responsible for pricing errors or omissions found in this flyer.
“Call The Nearest
Westesco
Location Today”
Western Tire Equipment & Supply Co.
Main Office:
Los Angeles Area
PRSRT. STD
U.S. Postage
PAID
Permit #14802
Chino, CA 91710
14802 Yorba Court
Chino, CA. 91710
909-393-4880
800-985-6464
FAX 909-393-6747
San Diego Area
13100 Kirkham Way Suite 214
Poway, CA. 92064
858-513-1919
San Francisco Area
1910 North Loop Road
Alameda, CA. 94502
510-865-6784
Western Tire Equipment and Supply Co., Inc.
Call 800-985-6464 or 909-393-4880
WestescoGlobal.com
Call now!