Pro equestrian surfaces Cojarec fibres® - Arguably the Best Fibre in Europe • SF-BR100 £195 per bale +VA V T VA Approximately 3 bales per tonne BETA-RIDE®: pro-equestrian Menage Stabilising Fibre a blended mix of Polypropylene, Polyester and Nylon fibre, Expertly produced in Belgium . Wider range of Fibre sizes more suitable for use with less refined Sands. (Manufactured Beach etc) Benefits: • Greater Stability • Increased Surface Resilience • Energy Return for your Horse • Moisture Retention 3% more than Polypropylene alone • Impact Cushioning reducing stress & Joint/Tendon injury Product Features: • Provides a root structure to the sand similar to grass • Improves drainage whilst Advantages: • Reduced Maintenance • Eliminates Riding Loose and Deep retaining moisture • Insulating properties helps to reduce freezing European Environmental Standard Beta-Ride® • SFF BR100 FSF-BR100 Natural Sand: Manu ufa f ctured Sand: fa Sand Grains vary from Angular to Round. The rounder the grain the less tightly the sand grain the more it will move and give less traction. Sub-Angular Grains compact less than angular grains yet still allow good traction and drainage. When selecting natural sand, you need to request the most sub-angular available. Angular Sub-Angular The particles are sharp and will compact tightly.. if used alone, alon being softer they break down into dust sooner and should be avoided. Ordering Beta-Ride®® Existing Sand Arenas: • • Surfaces consisting of other types of sand benefit from using Beta-Ride®. The wider range of fibre sizes for use with the less refined sands. (Manufactured Beach etc) Round Guidance no. of Bales Required: 40 x 20 metre - 9 Bales 60 x 20 metre - 12 Bales (Bales approx. 300 kgs.) Composition / Information: Chemical description - mixed plastics No hazardous impurities or additives Installation: We recommend that your sand riding surface be a minimum of 15 cm (6” depth) before installation of the Beta-Ride® Mixing Ratio: The ratio of Beta-Ride® fibres to be mixed into the top 10 cm (4”) depth of your sand surface depend on the type of sand used in the riding surface and the riding discipline for which the surface will primarily be used, as a guide we recommend the following; Racing gallops: 2.5 kg to 4 kg per square metre surface area of sand. Showjumping and dressage: 4 kg to 5 kg per square metre surface area of sand. Installation of Beta-Ride® into your Sand Riding Surface: Beta-Ride® are supplied in bales, these should be opened (remove wrapping & binding ties), and the fibres spread evenly over the leveled sand at the desired ratio (see above). Once evenly spread, Beta-Ride® should be rotovated into the top 10 cm (4”) of your sand surface using a rotovator or stoneburrier. Once Beta-Ride® are properly mixed in with the sand, the riding surface should be re-leveled and rolled. The riding surface is then ready for use, performing at its optimum when the surface material is moist; during periods of dry weather, some watering will be required. Maintenance: compacting rollers), operated off fff the ball-hitch of a A ATV/UTV or offf the 3 point link of a tractor. Beta-Ride® are supplied x-factory - delivery charges apply. +44 (0) 7908 411 770 www.fieldmastertractors.uk Cojarec UK Ltd, Unit 1 Penpound Garage, Heol-Y-Felin, Betws, Ammanford SA18 2HL