Back Door Hard Armour Panels Helicopter Armour Body Armour and Vehicle Armour Solutions for Your Safety UD Materials Soft & Hard Ballistics Vehicle Armour Kits Tailor-Made Solutions Ballistic Protection Баллистическая защита Materials & Solutions Mатериалы и продукция Product Range Personal Protection Soft Armour FMS is a world leader in production of Uni-Directional (UD) fabrics. FMS soft ballistic solutions are produced from a wide range of UD Polyethylene and UD Aramid fabrics. They are the main components for all soft bulletproof and anti-stab vests. FMS soft armour solutions are recommended for NIJ levels IIA, II and IIIA, and for anti-stab protection for NIJ level 1 and 2, providing protection against fragments, handgun bullets and knives. The NIJ level IIIA provides the highest protection rating in soft body armour, minimizing blunt trauma injury. Hard Armour Body Armour Plates FMS produces body armour plates made from Ultra High Molecular Weight Polyethylene, designed to withstand both lead core and mild steel core ammunition. FMS plates comply with NIJ 0101.04, NIJ 0101.06 and other well-known standards. FMS plates can be used either as a stand-alone or in conjunction with NIJ level IIIA vest depending on the specific plate design. FMS plates provide NIJ level III and NIJ level III+ protection against assault rifles. Higher protection levels and tailor made protection solutions such as NIJ level IV can be met by using ceramic-composite insert plates. All plates feature a high multi-hit capability, providing the wearer with an outstanding degree of safety if hit by multiple fragments or projectiles. The body armour plates are available in a wide range of sizes and shapes from flat or single-curved to complex multi-curve ergonomic designs for a better body shape overlaying and user comfort. FMS production capacity is up to 30,000 plates per month. Shield Panels Hand-held shields are typically used by Law Enforcement personnel like police or Special Forces. FMS makes hand shield panels from Ultra High Molecular Weight Polyethylene (UHMW-PE), Uni-Directional (UD) aramid or ceramic composites, which provide protection up to NIJ level IV. FMS Enterprises Migun Ltd. Contact Information P.O. Box 18077 Website: www.fms.co.il Tel-Aviv 61180, Israel Email: [email protected] For more information please visit company website: www.fmsenterprises.co.uk Vehicle Armour Vehicle Armour Panels Composite armour for civil or military vehicles are made as flat or 3D-shaped panels. FMS panels are available in a variety of forms with sizes up to 1600x2500 mm. FMS offers both Pressed Aramid and pressed FAMOSTONE (UHMW-PE) panels for protection against handgun bullets and fragments, providing up to NIJ level IIIA and EN level BR4 protection. FMS FAMOSTONE high-pressure pressed panels provide higher protection levels. They are used for the protection against guns and assault rifles, providing protection up to NIJ level III+ and EN level BR6. FMS panels can also be customized with different finishes, such as plastic cover or rubberized coating for better protection to extreme temperatures, diesel fuel, water, oil and severe vibrations. Composite Armour Kits FMS composite armour consists of ceramic strike face and polymer backing. The ceramics used include Boron-Carbide (B4C), Silicon-Carbide (SiC) and Alumina (Al2O3), while the backing is made from pressed UD fabrics including FAMOSTONE (UHMW-PE) and UD Aramid. FMS ceramic and steel composite armour solutions offer exceptional performance at extreme temperatures, enhanced water and chemical resistance, fire-retardancy, low blunt trauma and long-lasting lifecycle. The composite armour provides multi-hit protection against high-speed and armour-piercing projectiles and withstands threats such as NIJ level IV, EN level BR7, STANAG level 3 and higher threat levels. Raw Materials FMS raw materials include Ultra High Molecular Weight Polyethylene (UHMW-PE) Uni-Directional (UD) fabrics and Aramid UD fabrics, which are used in a wide spectrum of ballistic protection applications. Such fabrics combine Polyethylene (or Aramid) fibers in a thermoplastic matrix that is capable of absorbing and dispersing high impact energy. Each fabric layer consists of fiber tapes cross-plied at 0°/90°. All panels are produced in compliance with NIJ 0101.04 / 06 for personnel armour, and NIJ 0108.01, EN 1063 and STANAG 4569 standards for vehicle armour. About Us FMS Enterprises UK Ltd. is a leading developer and manufacturer of advanced ballistic protection raw materials and products for personal and vehicle protection armour. The company located in the heart of United Kingdom and sells its products in more than 40 countries worldwide. FMS is one of the main sources worldwide for Uni-Directional (UD) fabrics, pressed panels from UD fabrics and ceramic plates. FMS focuses on high performance while maintaining competitive pricing and width optimization required by a broad range of protection applications. FMS is a preferred and an approved supplier to various Ministries of Defense around the world. FMS materials are used in personal ballistic protection like bulletproof vests, helmets and shields, and in armouring civil and military vehicles, ships and aircrafts. Company Advantages High Quality The company puts extra emphasis on the product quality. FMS owns an advanced ballistic laboratory. It is used in providing QA and QC testing to all of the company products during production and prior to shipment. FMS quality management system is ISO-9001:2008 certified. Cost Savings FMS offers additional cost savings through it's production capabilities that allow for production of various fabric widths thus optimizing the fabric waste by up to 20% of the fabric cost. Further savings are possible in the panel production due to FMS large sized panels that allow better nesting optimization further reducing the overall customer costs by up to 10%. Overall customer savings could reach up to 30% in the final product material costs. Tailor-Made Solutions FMS Ballistic Laboratory enables optimized solutions to suit the specific needs of each customer. Fast Shipments FMS high volume manufacturing capacities enable standard orders to be usually shipped within 7 working days. FMS Enterprises UK Ltd. Birmingham United Kingdom Phone: +44 182 728 4933 Fax: +44 182 728 7724 Website: www.fmsenterprises.co.uk Email: [email protected]
© Copyright 2024