Document 121384

Subaru Forester Install Guide For more information, contact your local Motion Reseller or Motion Representative.
© 2014 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Subaru Forester Install Guide 1) Using plas7c trim panel removal tools, carefully release the radio trim panel as shown. For more information, contact your local Motion Reseller or Motion Representative.
© 2014 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Subaru Forester Install Guide 2) Release the upper and lower cable looms from the radio trim panel as shown. 3) Remove the radio trim panel as shown. For more information, contact your local Motion Reseller or Motion Representative.
© 2014 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Subaru Forester Install Guide 4) Remove the four screws retaining the radio head unit as shown. For more information, contact your local Motion Reseller or Motion Representative.
© 2014 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Subaru Forester Install Guide 5) Disconnect the cable looms and antenna from the rear of the radio head unit as shown. For more information, contact your local Motion Reseller or Motion Representative.
© 2014 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Subaru Forester Install Guide 6) Fit the LeI Hand Side Plate 032-­‐02-­‐0370 as shown ensuring the loca7on lug highlighted is posi7oned correctly. 7) Temporarily refit one of the radio retaining screws removed in step 4. For more information, contact your local Motion Reseller or Motion Representative.
© 2014 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Subaru Forester Install Guide 8) Fit one Lath Truss Screw 039-­‐02-­‐0456 as shown being careful not to over 7ghten. 9) Fit one Tek Screw 039-­‐02-­‐0455 as shown. 10) Fit one Tek Screw 039-­‐02-­‐0455 as shown. For more information, contact your local Motion Reseller or Motion Representative.
© 2014 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Subaru Forester Install Guide 11) Fit the Right Hand Side Plate 032-­‐02-­‐0369 as shown ensuring the loca7on lug is posi7oned correctly and temporarily refit one of the radio head unit retaining screws removed in step 4. 12) Fit the remaining Lath Truss Screw 039-­‐02-­‐0456 and the remaining two Tek Screws 039-­‐02-­‐0455 as shown. For more information, contact your local Motion Reseller or Motion Representative.
© 2014 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Subaru Forester Install Guide 13) Remove the two radio head unit retaining screws as shown. 14) ReaTach the cable looms and antenna cable to the radio head unit and slide back into place. For more information, contact your local Motion Reseller or Motion Representative.
© 2014 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Subaru Forester Install Guide 15) Replace the four radio head unit retaining screws as shown. For more information, contact your local Motion Reseller or Motion Representative.
© 2014 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Subaru Forester Install Guide 16) ReaTach the lower and upper cable looms to the radio trim panel as shown. 17) Carefully snap the radio trim panel back into place ensuring the side plates protrude as shown. For more information, contact your local Motion Reseller or Motion Representative.
© 2014 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Subaru Forester Install Guide 18) Fit the Front Plate 032-­‐09-­‐0371 as shown. 19) Fit four Socket BuTon Head Screws 039-­‐02-­‐0436 and four Lock Washers 039-­‐02-­‐0462 as shown. Tighten securely. For more information, contact your local Motion Reseller or Motion Representative.
© 2014 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Subaru Forester Install Guide 20) Fit the Tilt and Rotate Mount to the rear of the docking sta7on using the supplied screws. Ensure the holes indicated in the image are used. For more information, contact your local Motion Reseller or Motion Representative.
© 2014 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Subaru Forester Install Guide 21) Fit the Docking Sta7on / Tilt & Rotate Assembly to the Top Bracket as shown using the provided M8 fasteners. NOTE:-­‐ Ensure that the loca7on lugs are correctly engaged before final 7ghtening to prevent unwanted rota7on. 22) When installing the docking sta7on to the VESA mount, ensure that the view the driver has through the windshield is not restricted in any way. If it is then select a lower set of holes on the VESA mount. For more information, contact your local Motion Reseller or Motion Representative.
© 2014 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
For more information, contact your local Motion Reseller or Motion Representative.
© 2014 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com