TARGA # 22-455
+
TARGA TAIL KIT- KAWASAKI ZX-6RIRR 2OO5 STOCK EXH.. EURO SIGNALS
IN STALLATION INSTRUCTIONS
ReadCompletelybeforeproceeding.
andLED licenselight.
This kit is for stockexhaustsystem,and includesEuro turnsignals
The reartailpiecemustbe removedto changethe turnsignals.
Removethe passenger
saddleandremovethe two 6 x 16mmAllen button screwsat the top
l.
rear of the tailpiece.Removethe 6 x l4mm allenbutton screws(two left and one right side
) from the plasticsidecoversunder the rider saddleandfuel tank.The right rearhasa
pushpin into a grommet.Pull the panelstraightout andremoveboth the left andright
panels.Removethe two 6 x l2mm Allen Shoulderboltsholdingthe rider saddle,slidethe
saddleforwardand removeit. Removethe allenbuttonscrewsholdingthe tailpieceto the
subframe,and removethe threenylonpushpinson the left undersideholdingthe tailpiece
to the blackundertailpanel.(pushin on the centerof the pin and removethe fastener).
and
Carefullyspreadthe left sideof the tailpiece,lift up to clearthe electricalcomponents
slideback slightly.Lift the tailpiececlearof the subframe,disconnectthe taillight
connectorand removethe tailpiece.
Removethe plasticrearsignallamppanelsby rernovingthe four 6 x 30 hex bolts on each
2.
side,andthe 6 x l0rnm allenbuttonscrewat the bottom of eachpanel.Disconnectthe turn
signalsnapconnectorsand removethe panelssuflcientlyto accessthe mountingscrews
holdingthe stockturn signalsto the panels.Removethe plasticinnersignallampcovers
Installthe Euro signalssuppliedin the kit to the plasticpanelsand
andremovethe signals.
replacethe innersignallampcover
3.
Removethe rearfender/license
light assembly
by removingthe four 6mm hex nutsat the
undersideof the fender, thenremovethe starnped
bracketwith the sidereflectors.Save
the wire guidefrom the licenselight. Cut the licenselight wire abouttwo inchesfrom
whereit exitsthe rearfender.The cut endwill be splicedto the LED light suppliedat a
latertime.
Installthe LED licenselight(provided)to the rearhole in the aluminumplateandtbsten
4.
on the backsidewith the 8mm washerand hex nut. With the light facingstraightdown,
tightenthe nut. lnstallthe blackvinyl sleeveover the licenselight wires.
5.
Installthe new stampedaluminumplateto the studson the mufller as follows:Placea
blacknylon spaceronto eachstud,and hold in placewith the rubberband,theninstallthe
plateonto the studs.On the front left stud,installthe licenselight wire guide,at/o"black
nylon spacerand 6mm hex nut. lnstalla nylonspacerand hex nut to the front right stud,do
not tightennutsyet. At the rear studs,installthe stampedlicenseplatebracketas shown,a
nylon spacerandthe 6mrnhex nuts.Removethe rubberbandpreviouslyinstalledand
tightenthe four hex nutssecurelyholdingthe plateand licensebracketto the studs.Splice
the cut licenselight wire to the LED light wiresusingthe butt wire connectorssupplied.
The blackwire from the LED light connectsto the black/yellowgroundwire. Led lights
are polaritysensitiveand mustbe wired correctto work. Routethe licenselight wire thru
the wire guideto clearthe mufflerand reconnectthe snapconnector.Checkfor operation.
6.
Connectthe turn signalsnapconnectorsand checkfor properoperation.Replacethe rear
signallamp panelsandfastenat the bottornwith the grommetover the threadedinsertson
the aluminumpanel.Fastenusingthe stock6 x lOmm allenscrews.Replacethe front side
covers,tail pieceand rider saddle.Reconnectthe taillightwires,installthe passenger
periodicallyto
saddle.Checkall lightsagainfor properoperation.Checkall fasteners
insurethey remaintight.
P a e eI o f 2
TARGA# 22-455
_KAWASAKI
ZX6RIRR2OO5+STOCKE)G{AUST,ET'ROSIGNALS
TARGA TAIL KIT
MATEzuAL LIST
DESCzuPTION
ITEM #
QUANTITY
1
I
Stampedaluminummountingplate #24-098
I
#24-083
2
Stampedlicensebracket
I
#07-4072w
LED Licenselight
3
4
5
6
7
8
9
A
Nylon Spacerl/t"x 518" dia
Vinyl wire sleeve-black 12"
18-22 Ga.Butt wire connector
#07-35331(not shown)
Euro amberturn signall.h.
#07-3533r (not shown)
r.h.
Euro amberturn signal
not shown
rubberband(disposable)
(stocknut- reuse)
6mm FlangedHex Nut
8
I
2
I
I
1
A
a
g
6 ?-_@
a
Inc
TargaAccessories
Aliso Vieio. Ca 92656
page2 of 2