1. No category

MILITARY
& DEFENSE
ATDS AMC BOARD
SPECIAL FEATURES
¡¡ Easy to program
¡¡ Reliable and flexible
ATDS AMC
¡¡ Multiple input and
output modes
Compact and reliable ATDS communications for
Advanced Mezzanine Card (AMC) carriers
¡¡ Test without disconnecting
The AMC Airborne Tactical Data System (ATDS) Serial board installs in an industry standard Advanced Mezzanine Card (AMC) site to
provide a Tactical Digital Information Link (TADIL) A serial channel compliant with MIL-STD-188-203-1A, Appendix D2. In addition to
conventional input and output operations, the Sparrow has a built-in passive tap mode that provides interface monitoring and data
capturing capability. A software-enabled, embedded time-stamp generator tags input words with 125ns resolution. The time-stamp
clock can be synchronized between multiple boards by using a small interconnect cable and can be driven by an external clock source.
EASY TO PROGRAM
The ATDS AMC is easy to program and offers a variety ofinput and output modes to support all ATDS protocols. All the
ATDS control frames and timing required to transfer individual ATDS words are generated by thehardware control logic.
The software is only required to initially set the appropriate bits in the control registers toselect the desired transfer method
(DMA, non-DMA, Interrupt on completion, Interrupt on each word, etc.), theATDS word type (Address/Sidetone or Data), and then
enable the transfer. The interface comes standard with a driver for a number of commonly used operating systems,
an excellent documentation package, and sample C language code that can be freely used in application software.
EASY TO MAINTAIN
Intenance and reliability, the ATDS Serial board has an internal loopbackpath that allows it to be tested without
disconnectingcables. Can be updated in the field by reconfiguringits Field Programmable Gate Array (FPGA) logic to add
functionality or compensate for non-compliant interfaces. FPGA technology reduces component obsolescence, enabling the
Sparrow to be deployed and supported for years to come.
PRODUCT OVERVIEW
¡¡ Product Overview
¡¡ Interrupt, PIO & DMA operation
¡¡ Compliant with MIL-STD-188-203-1A, AppendixD2
¡¡ Separate DMA channels &FIFOs for inputs& outputs
¡¡ Compliant with PCI Express Base Specification, Rev. 1.0a
¡¡ Field Programmable Gate Array (FPGA) technology
¡¡ DTS or TDS operation
¡¡ Internal loop-back test without
disconnecting ATDS cables
¡¡ Frame interval of 13.33ms or 22.00ms
¡¡ Full picket addressing and Sidetone support
¡¡ Data recirculation (fault) testing
¡¡ KG-40 reset signal
¡¡ LEDs for DTS/TDS Mode, Net Control, User
¡¡ Software enabled time-stamp on input
words with 125ns resolution
¡¡ Passive tap mode
¡¡ Fully software configurable (no switches or jumpers)
© 2014 IXI Document | Yorba Linda, CA | 714.692.3800 | www.ixitech.com | [email protected]
MILITARY & DEFENSE
GENERAL PRODUCT FEATURES
TIME-OUT FEATURES
¡¡ Time-out values in 10μs or 1ms increments
¡¡ Time-out between words and/or total transfer times
¡¡ Start time-out at beginning of operation or upon transfer of first word
SOFTWARE SUPPORT*
ATDS Serial for AMC
Choice of driver included with board purchase:
¡ Windows®2000/XP/Vista/7
¡ Solaris™
¡ LynxOS®
¡ Linux®
¡ VxWorks®
¡ Wrap software options
ATDS Serial for AMC
OPTIONS AND ACCESSORIES
¡¡ CA-SW125-00 Cable, PCI/PMC/AMC,
F/F, 36” (for board to board testing)
¡¡ CA-SW125-01 Cable, PCI/
PMC/AMC, Pigtail 36”
¡¡ CA-SW125-02 Cable, Sparrow
PCI/PMC/AMC, Pigtail 72”
TECHNICAL SPECIFICATIONS
ATDS Interface
MIL-STD-188-203-1A,AppendixD2
ATDS I/O Connector
25-pin Micro D (Molex 83614-9012)
Faceplate
Power Consumption
ATDS Input Buffer
64K x 32-Bit FIFO
AMC Standard
PICMG AMC.0 R2.0(AMC Base Specification)
PCIe Bus Interface
Module Management
Form Factor
Standard: Compact(13.88 mm)Optional: Midsize(18.96 mm) Optional:Full-size(28.95mm)
Average +12V current draw: <500 mAAverage +3.3V
current draw: <250 mA
PICMG AMC.1 R2.0 (PCI Express on AMC Specification) (Single Lane x1)
IPMI V1.5 (Pigeon Point MMC)
AMC Single Width Module
(73.5 mm x 181.5
mm)
© 2014 IXI Document | Yorba Linda, CA | 714.692.3800 | www.ixitech.com | [email protected]