Product Info - King Electric

Kickspace / In-Cabinet Heater KTW Series
KTW 12 15 -HLS -RGB -T
A
B C D
E F
A: Series
B: 12 - 120V 24 - 240V
20 - 208V
C: Watts (250 to 1500)
D: High/Low Switch
E: Grill Style
F: Thermostat (optional)
Convertible design
for both vertical and
horizontal applications
20 Gauge Powder Coated Grill
7 Wattages
Standard Color: Black, (optional
almond, white or stainless)
Triple Coil Nichrome Element
C-Frame Motor
Squirrel Cage Blower 60 CFM
Smart Limit Protection®
Approved for direct contact
with building insulation
Low Profile
120, 208, or 240 volts
2-year limited warranty
Convertible Kickspace / In-Cabinet Heater
King introduces another first. The only convertible cabinet heater that can be installed either vertically or horizontally on the market.
This narrow profile heater is only 3-5/8” tall and specifically designed to fit into kitchen or bathroom cabinets, providing warm comfortable
air for a cold bathroom or kitchen floor saving valuable floor and wall space. For application other than kickspace, use the KTW-OL Grill.
Ordering Information
MODEL
120V
240V
KTW1215-RGB
KTW1215-HLS-TGW
KTW1215-HLS-TGSS
KTW1215-HLS-NG
KTW2415-RGB
KTW2415-HLS-TGW
KTW2415-HLS-NG
UPC
20597
20599
20601
20611
20598
20600
20612
VOLTS
120
120
120
120
240
240
240
WATTS
1500
1500
1500
1500
1500
1500
1500
AMPS
12.5
12.5
12.5
12.5
6.3
6.3
6.3
SHIP WEIGHT lbs
11
11
11
10
11
11
10
Engineering Specifications
Contractor shall supply and install, KTW Series limited space forced-air electric heaters, manufactured by King Electrical Mfg. Company.
Heaters shall be of the wattage and Voltage as indicated on the plans.
If thermal overload trips due to abnormal operating temperatures,
Ratings: Heaters shall be available in wattages of 250 to 1,500, at
thermal overload shall remain open until manually reset by turning the
120 volts or dual rated from 208 volts to 240 volts.
heater off for fifteen minutes. Automatic reset of thermal overloads,
Blower and Motor: A tangential cylindrical blower, delivering 60
which allow the element to continue to cycle under abnormal
CFM, shall be driven by a shaded pole, permanently lubricated,
conditions, will not be accepted.
C-frame type motor with impedance protection and sealed bearings.
Hi/Lo selector switch: Wattage can be adjusted from 250-1250
Motors shall be the same voltage as the heater.
watts in the low position and 750-1500 watts in the hi position.
Elements: Element assemblies shall have a 3-wattage element
Wall Can: The wall can shall be 20-gauge steel and shall contain Two
construction of coiled nickel chromium, alloy corrosion resistant wire
7/8” knockouts for power leads. The wall can shall be supplied with a
strung with a minimum of two rows of muscovite insulator.
factory installed grounding wire. Minimum Clearance to Floors and
Element assemblies shall have factory provided connection to
Sidewalls. Zero clearance to all walls.
allow field modification of wattage at time of installation.
Grill: The grill shall be louvered, one piece design. The grill shall be
Thermal Overload: Heaters shall be equipped with King’s patented
epoxy powder coated in the color specified on the plans or
thermal overload Smart Limit Protection®, which disconnects elements
stainless steel.
and motor in the event normal operating temperatures are exceeded.
Approval: cULus (E41422)
Kickspace / In-Cabinet Heater KTW Series
Dimensional Data
FRONT/GRILL
3-5/8”
17½”
BACK
SIDE
1½” 3-5/8” 1½”
7/8” knockout
1”
15½”
Accessories
7/8” knockout
1”
12-7/16”
*Separately Packaged
MODEL
TKIT-1
TKIT-2
KTW-HLS
KTW-RGA
KTW-RGB
KTW-RGSS
KTW-RGW
KTW-TGA
KTW-TGB
KTW-TGSS
KTW-TGW
Internal View of the KTW
UPC
11058
12301
20576
20577
20578
20579
20580
20581
20582
20583
20584
DESCRIPTION
Single Pole Inbuilt Thermostat Kit
Double Pole Inbuilt Thermostat Kit
Hi-Lo wattage Selector Switch Kit Assembly
Recess Grill, Almond
Recess Grill, Black
Recess Grill, Stainless Steel
Recess Grill, White
Trim Grill, Almond
Trim Grill, Black
Trim Grill, Stainless Steel
Trim Grill, White
WEIGHT lbs
0.3
0.3
0.4
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0