System Components for 3~ Surface Track Standard 8 Live end, Earth contact left -2 -3 99-024-1 Earth contact right -2 -3 99-025-1 T coupler can be used as feed Earth contact left 99-030-1 -2 -3 Earth contact right -2 -3 99-029-1 Mid feed can be used as feed through track -2 99-127-1 -3 X coupler can be used as feed gold plated spring contacts -2 -3 99-031-1 Electrical straight coupler recessed 99-037-1 -2 -3 Flexible coupler 99-033-1 -2 Electrical straight coupler can be used as feed -2 -3 99-078-1 End cap 99-035-1 A 5-conductor track with 3 separately switchable circuits. It consists of an extruded 3~ SURFACE TRACK STANDARD 32 aluminum profile which also functions as earth and two inserted plastic profiles carrying 4 embedded 2.5 mm2 copper conductors. Any given profile can be easily cut to length on site. It is not necessary to cut back or bend back the copper wire. 8 8 The track has pre-punched holes for mounting and may be used within hand-reach. 36 Multi Adaptors with bus contacts can use the normal 3-circuit feed. In this case there is no DALI function. -2 -3 3~ surface track standard white or black powder coated or silver anodised 1m 2m 3m 4m 25-101 25-201 25-301 25-401 25-103 25-203 25-303 25-403 25-102 25-202 25-302 25-402 L coupler can be used as feed Earth contact outside 99-079-1 -2 -3 Earth contact inside 99-027-1 -2 -3 V D E Surface mounted track can be bent to order. 16 Mechanical load see p. 42 Can be cut on site Electrical connection and connection data see p. 40 Weight per meter: 1kg white (last digit 1) m black (last digit 2) silver (last digit 3) System suspensions and recessed profile for 3~ track see page 12/13 EUTRAC ® 17 SYSTEM COMPONENTS FOR 3~ SURFACE TRACK STANDARD 3~ Surface Track Standard