Deep Treatment Hair Mask CD-0045(LA) This hair mask is suitable for consumers who want a deep conditioning treatment without too much effort at home. Chemidex™* S surfactant and Merquat™* 2001 polymer provide conditioning for dry and wet combing properties. Schercemol™* SHS, DIA, and CATC esters form an emollient cascade to deliver smoothness, shine and easy spreadability – without a heavy or greasy effect. Glucam™* P-20 humectant is used as a humectant as well as a fragrance fixative. INCI Name, Trade Name A. : B. C. Weight % Function Appearance White viscous cream pH 4.0 – 4.5 Viscosity (mPa·s)** 28,000 – 34,000 Yield Value (dyn/cm²) 500 - 800 1. Deionized Water 2. Stearamidopropyl Dimethylamine, Chemidex™* S Surfactant 0.70 3. Lactic Acid (85% solution) 0.35 Acidifier 4. Polyquaternium-47 (20% wt TS), Merquat™* 2001 Polymer 1.00 Conditioner Stability: Passed 3 months @ RT & 45°C, Passed 5 cycles freeze/thaw. 5. Cetrimonium Chloride (50% wt), Genamin® CTAC 1.00 Conditioner/ Emulsifier **Brookfield RV Viscometer spindle #E95 @ 20 rpm, 25°C @ 24 hours 6. Cetearyl Alcohol, Lipocol® CS 30:70 5.00 Thickener 7. Isostearyl Hydroxystearate, Schercemol™* SHS Ester 2.00 Emollient 8. Diisopropyl Adipate, Schercemol™* DIA Ester 1.00 Emollient 9. PPG-20 Methyl Glucose Ether, Glucam™* P-20 Humectant 0.70 Humectant 10. Cocoyl Adipic Acid/ Trimethylolpropane Copolymer, Schercemol™* CATC Ester 1.00 Emollient 11. Butyrospermum Parkii (Shea) Butter, Unibase Karité 1.00 Emollient 12. Methylchloroisothiazolinone (and) Methylisothiazolinone, Euxyl® K 120 0.10 Preservative 13. Fragrance, FAV 129466 0.40 Fragrance 85.75 Diluent Product Properties: Conditioner Supplier References: Lubrizol Advanced Materials, Inc. (2, 4, 7, 8, 9, 10) Clariant Corporation (5) Lipo do Brasil (6) ChemyUnion Quimica Ltda (11) Schülke & Mayr (12) FAV 105 (13) Procedure: 1. PART A: In a suitable mixing vessel add ingredients 1-4 and heat to 75°C. Mix until homogeneous and clear. 2. Add ingredient 5 and mix until uniform. 3. PART B: In a separate vessel, combine PART B ingredients. Heat to 75°C. 4. When uniform, add PART B to PART A with mixing. Mix until uniform (~10-15 minutes) maintaining temperature at 60°C. 5. Begin cooling the batch with mixing. 6. PART C: When batch < 40°C, add ingredients 12-13, one at a time with gentle mixing. Make sure that batch is uniform before each ingredient is added. Mix until uniform. CD-0045(LA) Edition: November 5, 2013 Previous Edition: May 13, 2013 Reference #: CD-204113 (ERNV) Original Edition: April 21, 2013 Lubrizol Advanced Materials, Inc. / 9911 Brecksville Road, Cleveland, Ohio 44141-3247 / TEL: 800.379.5389 or 216.447.5000 The information contained herein is being furnished for informational purposes only, upon the express condition that the User makes its own assessment of the appropriate use of such information. While the information contained herein is believed to be reliable, no representations, guarantees or warranties of any kind are made as to its accuracy, suitability for a particular application or the results to be obtained herefrom. Lubrizol Advanced Materials, Inc. ("Lubrizol") cannot guarantee how any products associated with this information will perform in combination with other substances or in User’s process. Due to the variations in methods, conditions and equipment used commercially in processing these materials, no warranties or guarantees are made as to the suitability of the information/products for the applications disclosed. Lubrizol shall not be liable and the User assumes all risk and responsibility for, any use or handling of any material beyond Lubrizol's direct control. LUBRIZOL MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. It is the User’s sole responsibility to determine if there are any issues relating to patent infringement of any component or combination of components relating to the supplied information. Nothing contained herein is to be considered as permission, recommendation, nor as an inducement to practice any patented invention without the permission of the patent owner. For further information, please visit: www.lubrizol.com/personalcare Lubrizol Advanced Materials, Inc. is a wholly owned subsidiary of The Lubrizol Corporation *Trademark owned by The Lubrizol Corporation © Copyright 2013 / The Lubrizol Corporation
© Copyright 2024