Cuttlebug Sandwich Guide
Courtesy of http://PersonalDieCutting.com
Note: The plates at the bottom of the list should go on the bottom of the sandwich. It will be best to
read the sandwich from bottom to top.
Die Cut
Accu-cut: ZAZ Cut & Emboss folders
Boss Kuts dies
Brass Embossing Stencils
Cuttlebug dies
Jcut
Nestabilities
Quickutz Revolution dies, Quickutz nesting dies
Sizzix 12 inch dies
(option 1)
You’ll need 2 ‘A’ Mats & 4 ‘B’ mats. This will make
a ‘Double stack’ – Notice the mats are staggered
or overlapping – When it is part-way, add the
second ‘A’ mat and ‘B’ mats (respectively) behind
the first stack to finish the cut.
Sandwich
Plate 'C'
Cardstock
Die (blade up)
Plate 'B'
Plate 'A'
Plate 'C'
Cardstock
Die (blade up)
Plate 'B'
Plate 'C'
Plate 'B'
Embossing Mat or Plumber’s Gasket
Cardstock
Brass Stencil
Plate 'B'
Plate 'A'
Plate 'B'
Media
Die (blade up)
Plate 'B'
Plate 'A'
Plate 'C'
Cardstock
Die (blade up)
Plate 'B'
Plate 'A'
Plate 'B'
Cardstock
Die (blade up)
Plate 'C'
Plate 'A'
Plate 'C'
Cardstock
Die (blade up)
Plate 'B'
Plate 'A'
Plate 'B' - Plate 'B'
Cardstock
12 inch die
Plate 'B' - Plate 'B'
Plate 'A' - Plate 'A'
Sizzix 12 inch dies
(option 2)
Sizzix long mat option)
2 ‘A’ mats and 2 Sizzix long mats:
Part way through, place the second
‘A’ mat behind to complete the cut.
Sizzix Cut N Fold dies
Sizzix Ellison Bigz,
Ellison AllStar: Large,
Sizzix BigShot/Bigkick dies,
Sizzix Steel Rule dies
Sizzix Ellison Thin Cuts
Sizzix Sizzlit
Spellbinders Cut & Emboss dies
Emboss
Cuttlebug Embossing Folders
Brass Embossing Stencils
Sizzix Big Shot,
Ellison Big Shot Embossing Folder
Sizzix long mat
Cardstock
12 inch die
Sizzix long mat
Plate 'A' - Plate 'A'
Chipboard Shim
Plate 'B'
Cardstock
Die
Plate 'A'
OR TRY
Chipboard Shim
Die
Cardstock
Plate 'B'
Plate 'B'
Media
Die (blade up)
Plate 'B'
Plate 'B'
Media
Die (blade up)
Plate 'B'
Plate 'A'
Plate 'B'
Media
Die (blade up)
Plate 'B'
Plate 'A'
Plate 'C'
Cardstock
Die (blade up)
Plate 'B'
Plate 'A'
Sandwich
Plate 'B'
Folder (Media inside)
Plate 'B'
Plate 'A'
Plate 'B'
Embossing Mat or Plumber’s Gasket
Cardstock
Brass Stencil
Plate 'B'
Plate 'A'
Possible shim
Plate 'B'
Folder (Media inside)
Plate 'B'
Plate 'A'
Embossing Templates (Sizzix)
Embossing Templates - thin
Nestabilities
(You will need an embossing mat to emboss, or a
lumbers gasket cut to size.)
Simple Impressions
Sizzix 'Embosslits'
Textured Plates (like Fiskars)
Plate 'C'
Cardstock
Brass Template
Plate 'B'
Plate 'A'
Plate 'B'
Vulcanized Rubber
Media/ Brass Template
Plate 'B'
Plate 'A'
Plate 'B'
Plate 'B'
(try 2 first)
2-3 Cardstock Shims
Embossing Mat
Die with die cut still in die
Plate 'A'
Plate 'B'
Folder (cardstock inside)
Plate 'B'
Plate 'A'
OR TRY
Plate 'B'
Folder (cardstock inside)
Chipboard Shims
Plate 'A'
Plate 'B'
Folder (Media inside)
Plate 'B'
Plate 'A'
Plate 'B'
Possible Shim
Impressions Plate
(sold in Sizzix Texturz Starter Kit)
Embossing Mat
Cardstock
Texture Plate
Plate 'A'