OIL REFINERY
Н-60M
(for diesel fuel production)
Presented by: Pinter Works
Hungary
OIL REFINERY Н-60M (for diesel fuel production)
In the last few decades in the market of oil refineries major
changes took place. Owing to rapid development of technology
small-sized oil refineries became more attractive for many oil
production companies.
The operational economy, productivity, automation level, quality of oil products of
such oil refineries are increasing year by year. These refineries generate a
considerable profit for their owners.
«REOTEK» LLC with more than 20 year experience in designing and producing
of small-sized oil refineries succeeded to create a new, unique, innovative
product – monobloc oil refinery Н-60M.
In spite of many advantages the existing small-sized oil refineries require special infrastructure and comparatively high
level of qualification of personnel operating such refineries.
This oil refinery does not require assembling, commissioning and it is ideal for operation in remote desert areas and oilfields.
Only one operator can control this facility. Thanks to high level of automation it is easy to run the refinery as to drive a car. The
personnel should have minimal qualification. The oil refinery is filly self-contained, does not require any external electric power
supply, can be brought into operation within one hour.
The careful study of our clients’ requirements and choices as well as the Company’s experience in designing and producing of
small-sized oil refineries were the base for creation of this new model of oil refinery.
www.pintermuvek.hu
OIL REFINERY Н-60M (for diesel fuel production)
The main advantages of H-60M oil refinery
It is compact and highly mobile owing to the optimal location of all elements and
components and horizontal distillation tower. The distillation tower located
horizontally ensures a very high precision of oil fractions distribution. The oil
refinery H-60M is constructed on truck trailer base and fully ready for operation. It
can be brought into operation within 1 hour after arrival to operating site. Any
special preparation of operating site for this oil refinery is not required. After
operation the unit can be quickly relocated to another place without complicated
dismantling usual for such cases.
It is self-contained: the refinery mounted on truck trailer base is fully ready for
operation and does not depend on any external electric power supply thanks to
diesel-electric set integrated into the refinery. The cooling water supply (about 100
litre per hour) with flexible hose is only required to start operation. Crude from
stationary tanks is supplied to fractional distillation through quick-installation pipes.
The refinery has the most up-to-date equipment ensuring the full automation of
fuels production. There is the equipment technical conditions testing system as well
as automatic monitoring of crude oil quality. In case of any emergency the oil
refinery will shut off automatically and operator’s monitor will show a possible cause
of emergency. If necessary, the refinery can be controlled remotely. Full automation
of operation and maintenance minimize the possibility of any emergency.
www.pintermuvek.hu
OIL REFINERY Н-60M (for diesel fuel production)
Safety measurements: monobloc oil refinery H-60M is designed and produced in
compliance with the following standards:
1 ASME Code Section VIII, Div. 1, Pressure Vessels and Heat Exchangers;
2 API-500A Classification of Areas for Electrical Equipment in Petroleum Refineries (Class 1, Group
D, Div. 2) on the process end of the skid. A firewall separates the process end of the skid from the
control room and heater end of the skid. A seal is placed in all conduits that pass through the
firewall. The heater end of the skid is unclassified;
3 ANSI-B31.3 Petroleum Refinery Piping;
4 FM Requirements for Burner Control;
5 API-RP520, Parts I and II, Design and Installation of Pressure Relieving
Systems in Refineries;
6 All process vessels are designed and fabricated in accordance with the ASME Code,
Section VIII, Division 1.
The oil refinery H-60M is equipped with dry powder fire extinguisher system.
It is economically viable and operationally efficient:
can be run within a wide range of temperatures (from -60°С to + 45°С) as well as in high humidity
environment (up to 100%);
thanks to implemented innovations it has very low consumption of fuel for heating of crude;
processes crude oil as well as gas condensate;
fuels produced by oil refinery can be used for further heating of crude;
in addition to diesel fuel it can produce optionally straight-run naphtha (gasoline) and fuel oil; can
be adapted for Customer’s specific needs;
has a minimal impact on environment;
has long operational life till total overhaul;
has low operation cost and short payback period (less than 1 year).
www.pintermuvek.hu
OIL REFINERY Н-60M (for diesel fuel production)
Specifications of H-60M oil refinery
Unit
Value
Diesel fuel capacity
tons per day
20
Crude oil consumption for diesel fuel production
tons per day
60
- heat exchanger, furnace;
MPa (kg/cm²)
1.6 (16)
- flash dram, distillation unit, condensing apparatus, reflux
accumulator
MPa (kgf/cm²)
0.05 (0.5)
°C
360
Name
Maximum overpressure:
Maximum temperature for heating of crude
Electric power supply
380V, 3 phases, 50Hz
Fuel for heating of crude
fuel oil
Consumption of fuel for heating of crude
kg per hour
≤ 52
Total weight
kg
≤ 25,000
Length
m
16
Width
m
2.5
Height for transport
m
4.0
Operational life
year
12
Production and supply – 6 months
Payment terms – flexible, different banking procedures can be applicable.
www.pintermuvek.hu
OIL REFINERY Н-60M (for diesel fuel production)
Oil refinery H-60M
www.pintermuvek.hu
OIL REFINERY Н-60M (for diesel fuel production)
CONTACT US
Adress: Rákoczi F. út
171/2-177
Kecel, Hungary H-6237
www.pintermuvek.hu
[email protected]
www.pintermuvek.hu