1. health and fitness
2. disease
3. aids and hiv

PEPFAR Data for Accountability Transparency Impact
Monitoring (DATIM)
Data Deduplication
User Guide
This information has been prepared solely for the use and benefit of the U.S. Department of State’s Office of the U.S. Global AIDS Coordinator
and is not intended for reliance by any other person.
Page 1
President’s Emergency Plan for AIDS Relief
PEPFAR Data Deduplication
Getting Started with PEPFAR DATIM
Please go to www.datim.org, and enter your username and password.
“Simple” Data Deduplication
This section describes accessing the Data Deduplication App.
The Data Deduplication App allows DATIM Interagency users to view and reconcile any specific facility
site with data entered by more than one Implementing Partner. The purpose of data deduplication is to
ensure that results are not being double-counted at the site level and to accurately reflect PEPFAR
program results.
To access the Data Deduplication App, select the Apps feature on the navigation ribbon located at the
top right of the screen. Once accessed, select the arrow button at the bottom of the App section to see
more options (if necessary).
Page 2
President’s Emergency Plan for AIDS Relief
PEPFAR Data Deduplication
Use the side bar to scroll down to the bottom of the application options. Select Data Deduplication,
which will appear in the application list.
Page 3
President’s Emergency Plan for AIDS Relief
PEPFAR Data Deduplication
1.) Once you have selected Data Deduplication your screen will appear as follows:
• From the OU dropdown menu, select your OU
• From the data set dropdown menu, select Targets or Results
• From the time reporting period dropdown menu, select the desired reporting period
2.) Select the Show Normal Dupes button
*If DSD-TA Crosswalk duplicates are present for your OU, a notification will display. Click “No
Thanks” to close the message. DSD-TA Crosswalk duplicates are discussed on Page 8 of this
document*
3.) Once the desired OU and Reporting Period are selected, the simple duplicates requiring
resolution will display:
Page 4
President’s Emergency Plan for AIDS Relief
PEPFAR Data Deduplication
4.) The duplicated indicator will display (separated by Numerator and Denominator) along with:
a. Agency – The funding agency of the mechanism with duplicated data
b. Partner – The implementing partner who submitted the data
c. Value – The indicator value entered by the implementing partner
5.) To resolve the duplicated values, select from the “How to Resolve” radio buttons
a. Use max – This option will use the largest value submitted by an implementing partner
for the indicator
b. Use sum – This option will sum all values entered by implementing partners for the
indicator and submit the grand total
c. Use a custom value – This option allows you to manually enter a value for the indicator
6.) Once selected, click Resolve to adjust the Indicator value in the submitted data set. The
selected value also displays in the “custom value” field.
Page 5
President’s Emergency Plan for AIDS Relief
PEPFAR Data Deduplication
Reconciling Multiple Duplicated Indicators
1.) Once the desired OU and Reporting Period are selected, the duplicated Indicators by
mechanism will display:
2.) From the bottom of the bottom of the Data Deduplication app screen, you can select from the
following options:
•
•
Use Max – This feature selects the “max” feature for each duplicated record displaying on the
page
Use Sum – This feature selects the “sum” feature for each duplicated record displaying on the
page
3.) Once a desired selection is made, click the Resolve duplicates button
•
A confirmation message will display the total number of resolved duplicates as a result of the
selection
Page 6
President’s Emergency Plan for AIDS Relief
PEPFAR Data Deduplication
Reviewing and Correcting Deduplicated Records
Once data deduplication has been applied, a review of the duplicated records can be performed.
1.) Once the desired OU and Reporting Period are selected, the duplicated Indicators by
mechanism will display:
2.) From the bottom of the Data Deduplication app screen, select the “Show All” checkbox:
3.) All duplicated records for the selected OU, which have previously been reconciled, will display:
Page 7
President’s Emergency Plan for AIDS Relief
PEPFAR Data Deduplication
“DSD-TA Crosswalk” Data Deduplication
This section describes the functionality of the DSD-TA Crosswalk in the Data Deduplication App.
The DSD-TA Crosswalk allows DATIM Interagency users to deduplicate indicator data across different
service types (e.g. DSD vs. TA) to ensure “double counting” is not present. As part of PEPFAR
guidance, DSD (Direct Service Deliver) always takes precedence over TA (Technical Assistance) in
terms of reporting submissions.
The DSD-TA Crosswalk is accessible through the updated Data Deduplication App.To access the Data
Deduplication App, select the Apps feature on the navigation ribbon located at the top right of the
screen. Once accessed, select the arrow button at the bottom of the App section to see more options
(if necessary).
Use the side bar to scroll down to the bottom of the application options. Select Data Deduplication,
which will appear in the application list.
Page 8
President’s Emergency Plan for AIDS Relief
PEPFAR Data Deduplication
1.) Once you have selected Data Deduplication your screen will appear as follows:
• From the OU dropdown menu, select your OU
• From the data set dropdown menu, select Targets or Results
• From the time reporting period dropdown menu, select the desired reporting period
2.) Select the Show DSD/TA Dupes button
*If DSD-TA Crosswalk duplicates are present for your OU, a notification will display. Click “Yes
Please” to display the DSD-TA duplicates*
3.) Once the desired OU and Reporting Period are selected, and Show DSD/TA Dupes has been
selected, the DSD-TA Crosswalk duplicates will display:
Page 9
President’s Emergency Plan for AIDS Relief
PEPFAR Data Deduplication
Note: DSD-TA Crosswalk duplicates are denoted with a special label as highlighted above in
red.
Addtitional Notes:
If applicable, previously deduplicated TA-TA duplicates will be displayed informing you that the
“simple” deduplication has already taken place. This will be labled “dedupe adjustment” as
highlighted above in red.
In the example above, 11 is the DSD-TA crosswalk value, therefore an additional 11 needs to
be deduped to fully cancel out TA.
• 3 is the TA to TA duplicate value and the deduplication has already taken place
• An additional -11 needs to be accounted for to fully cancel out the TA value
4.) The duplicated indicator will display (separated by Numerator and Denominator) along with:
a. Agency – The funding agency of the mechanism with duplicated data
b. Partner – The implementing partner who submitted the data
c. Value – The indicator value entered by the implementing partner
Page 10
President’s Emergency Plan for AIDS Relief
PEPFAR Data Deduplication
Note: Hovering over the Facility Site name (highlighted by the red arrow) will display the entire
SNU structure from the OU down to the facility name
5.) To resolve the duplicated values, select from the “How to Resolve” radio buttons
a. Use max – This option will use the largest value submitted by an implementing partner
for the indicator
b. Use sum – This option will sum all values entered by implementing partners for the
indicator and submit the grand total
c. Use a custom value – This option allows you to manually enter a value for the indicator
Note: For DSD-TA Crosswalk, the radio button always defaults to “Use a custom value” which
always defaults to 0. The idea is that any duplicated data in the DSD-TA Crosswalk is assumed
duplicate data, as DSD always takes precendence over TA
6.) Once selected, click Resolve to adjust the Indicator value in the submitted data set.
Page 11