1. No category

Any-001 Maintenance
Firmware Upload Guide
How to upgrade the firmware for Control Board
Service Tool
- S/W: AVR Studio
- H/W: AVR ISP with Cable
1
Any-001 Maintenance
Firmware Upload Guide
1. Starting AVR Studioand click the OPEN button.
2. Please open to the firmware file located in folder. Click the Open button.
2
Any-001 Maintenance
Firmware Upload Guide
3. If the selection is successfully completed, the following window appears.
4. Click the [Build Active Configuration] button on toolbar.
5. Click the [Build and run] button on toolbar.
3
Any-001 Maintenance
Firmware Upload Guide
6. File preparation is complete.
7. Disconnect the CPU board from the Control board.
Please connect the cable of AVR ISP. Pin 1 is the top right corner.
①
②
8. Please connect the CPU and AVR ISP Cable. The red line of the Cable is No. 1.
Please connect the red line and pin 1.
4
Any-001 Maintenance
Firmware Upload Guide
9. Now connect the other side of the AVR ISP Cable.
The other end of the cable must be connected to the USB port.
If the PC connection is successful, LED is ‘on’.
10. Click the [Con] button on toolbar.
11. A new window appears as follows. Choose your platform and port. Click the [Connect] button.
5
Any-001 Maintenance
Firmware Upload Guide
/12. Click the
button.
13. Choose to upload Firmware(HEX file) and click the open button.
6
Any-001 Maintenance
Firmware Upload Guide
14. Click the Program button.
15. If the upload is successfully completed, the following window appears.
16. Firmware Upload is finished.
7