SECURITY DOOR CONTROLS IP PRO™ CLASS Learn How To Install and Program The SDC IP Pro™ Access Control System IP Pro™ is a complete line of low power, professional grade door access control solutions – all easily connected and powered by ordinary Ethernet network cables providing incredible flexibility and cost savings when installing access control. • Review of PoE capable locking hardware • IP Pro™ feature and benefits • Hands on wiring of IP Pro MARK THE DATE: June 24, 2015 Location: ADI Denver 5065 Klamath Street. Denver, CO 80221 • Hands on software implementation COURSE OBJECTIVES • Q&A • Become familiar with SDC’s full line of energy-efficient, PoE capable locking hardware • Be able to install and configure an IP Pro™ Controller and SDC IPRW Wiegand Card Reader • Understand the primary components required to build an access control system using an IP Pro™ system • Be able to establish communications with the IP Pro™ Controller over a simple network At the completion of this training course, participants will: ® ESA ACCREDITED 2 Credits CLASS TIME: 1 - 3 PM Note: Group Training Method Bring Your Own PC. Software Implementation Will Require The Use of a Windows-Based Laptop • Be able to program the IP Pro™ Controller for a single user credential, user group, and user schedule, using the built-in web server interface Who Should Attend? Professionals involved with installation, configuration, and design of physical security, access control products Contact Rhonda to reserve your spot: 800-413-8783 or [email protected]
© Copyright 2024