How to connect to Wi-Fi 41

41
How to connect to Wi-Fi
LSBU uses the eduroam service to connect Wi-Fi devices. Once you are set up you will
automatically be connected whenever you are in range. Wireless Internet access is
available across campus, though not in the Halls of Residence.
Windows 7
Note for Windows XP users: while the screenshots may differ, the options and dialog
boxes will remain the same.
1. Select Start button >
Control Panel
a. If in normal view,
choose
View network status
and tasks.
b. If in Classic view,
choose
Network and
Sharing Center.
2. Select Connect to a
Network.
3. Type eduroam in the
Network Name field.
4. Select WPA2-Enterprise
as Security type.
5. Select Next.
How to connect to Wi-Fi
6 .Click on the Security tab.
By default this should read:
Security Type: WPA2 Enterprise
6. SelectType: AES
Encryption
Change
connection
settings
Network
Authentication:
PEAP
7. Select Settings.
8. In the Protected EAP properties
dialog box, uncheck
Validate server certificate.
9. Under
Select Authentication Method,
choose Secured password
(EAP-MSCHAP v2)
10. Select Configure…
11. In the EAP MSCHAPv2 Properties
dialog box, uncheck the
Automatically use my Window
logon… dialog box.
12. Click OK until you reach the Manually
connect to a wireless network
dialog box.
13. Select Close.
14. Right-click the Wi-Fi icon
in the system tray.
15. Select eduroam and Connect.
16. Type your username into the Enter
Credentials box.
For your username enter your full
LSBU email address i.e.
[email protected] (on some
devices you may need to use your
LSBU username).
17. Enter your password.
18. Select OK.
Page|2
You are now connected!
How to connect to Wi-Fi
Windows 8
1. Right click on the wireless icon in the bottom right of the
desktop and select Open Network and Sharing Centre.
2. Select Set up a new connection or network.
3. Select Manually
connect to a wireless
network and click Next
4. Enter the following
details:
a. Network name:
eduroam
b. Security type:
WPA2Enterprise
c. Encryption type:
AES
5. Click Next
Page |3
How to connect to Wi-Fi
6. Click Change Connection
Settings.
7. Select the Security tab
8. Click Settings.
9. Tick the box labelled
Connect to these servers and
type
forge.lsbu.ac.uk;radius.lsbu.ac
.uk in the box below.
10. In the Trusted Root
Certification Authorities: box
below tick the box labelled
AddTrust External CA Root.
11. Click OK.
Page|4
How to connect to Wi-Fi
12. Click Advanced Settings.
13. Tick the box labelled Specify
authentication mode and select User
authentication from the drop down
menu.
14. Click OK, OK and Close
15. Select the wireless network eduroam and type in
your full LSBU email address and password,
(on some devices you may need to use your
LSBU username).
16. Click on Connect.
You are now connected!
Page |5
How to connect to Wi-Fi
Apple Mac
1. Select the AirPort Wi-Fi icon.
2. Select Join Other Network…
3. Set the Network Name to
eduroam.
4. Set Security to
WPA2 Enterprise.
5. For your username enter your
LSBU username (on some
devices you may need to use
your full email address).
6. Enter your LSBU password.
7. Select Join.
8. At the Verify Certificate
dialog box select Continue.
9. You will need to enter your
personal device password.
You are now connected!
Page|6
How to connect to Wi-Fi
iPhone and iPad
1.
2.
3.
4.
Tap Settings.
Tap Wi-Fi.
Tap Other…
Type in eduroam.
5. Tap Security.
6. Select WPA2 Enterprise.
7. Tap Other Networks.
8. Enter username & password.
9. For your username enter your
full LSBU email address i.e.
[email protected] (on
some devices you may need to
use your LSBU username).
10. Tap Join.
11. Tap Accept to accept the
security certificate.
You are now connected!
Page |7
How to connect to Wi-Fi
Android
1. Pull down Notifications tray or
go to Settings.
2. Tap Wi-Fi.
5. Set SSID to eduroam.
6. Set Security to 802.1x EAP.
7. Set EAP method to PEAP.
8. Set Phase 2 authentication to
MSCHAPV2.
3. Scroll down to Other networks.
4. Scroll down & tap Add Wi-Fi network.
9. For identity enter your full LSBU email
address i.e. [email protected] (on
some devices you may need to use your
LSBU username).
10. Type password.
11. Tap Save or Connect.
Page|8
You are now connected!
How to connect to Wi-Fi
Blackberry
1. Enable Wi-Fi.
2. Select Set Up Wi-Fi Network.
4. Click Manually Add Network.
3. Click Next.
5. Enter eduroam in SSID.
6. Click Next.
eduroam
7. Select WPA/WPA2 Enterprise for
Security Type.
8. Select PEAP for Enterprise SubType.
Page |9
How to connect to Wi-Fi
9. Enter username & password.
For your username enter your
full LSBU email address i.e.
[email protected] (on
some devices you may need to
use your LSBU username).
11. Tick Disable Server Certificate
Validation.
12. Click Save and Connect.
10. Click Inner link security and
select EAP-MS-CHAP v2.
13. Wait a few moments.
14. You are now connected!
You are now connected!
For further information and support contact:
Tel: 020 7815 6678
Email: [email protected]
Visit: 1 South, Learning Resources Centre.
Produced by LLR 05/09/2014
P a g e | 10