Item code: 046330 Setting Up Your D-Link DSL 320B Read this first Introduction Quick Installation Hello, 1. Put the setup CD into your computer's CD/DVD drive. The CD should automatically start. Looking to setup the D-Link 320B Ethernet Modem? Follow this Quick Setup guide and you’ll be online in no time at all. What’s in the box: 2. If the disc doesn’t start, you can click the CD icon with your right mouse button and select Autoplay from the menu. You don't need the CD’s Quick Installation to get started. Go to Page 6 for a guide to using a Web browser based setup. Before you start Has your service gone live? Don’t follow these instructions until you have received confirmation that your broadband service is ready to use. 3. The start page will appear on your screen. Click the Quick Installation Start button. Have you got your broadband username and password to hand? It’s in the email we send you when your service is activated, it looks like this: Service Broadband username format Plusnet [email protected] Madasafish [email protected] Force9 [email protected] Free-Online [email protected] 2 7. 4. The first step of the Quick Installation is to power up the modem. 5. Plug the power adapter into the modem. 8. Switch the modem on and check the power light comes on. If it does, you can click the Next button on your computer screen. If not, see the Troubleshooting section on the last page of this guide. Remove the sticky label from the modem. 6. Plug the adapter into a power socket, make sure the power socket is switched on. 9. You will now connect the modem to your computer. 3 Item code: 046330 10. Connect the Ethernet cable to the back of the modem. 13. Plug one end of the DSL cable into the microfilter. Then plug the microfilter into your telephone socket. 11. Connect the other end of the Ethernet cable to a free network socket on your computer. If the LAN comes on, click Next. Otherwise see Troubleshooting on the last page of this guide. 14. Plug the other end of the DSL cable into the socket marked 'DSL'. The DSL light on the front of the modem will flash and then stay on. If not, see Troubleshooting on the last page of this guide. 12. Next, connect your modem to your broadband enabled phone line. 15. 4 Next, the modem will try to detect your 16. Choose United Kingdom for Country and Other for ISP. 18. Next, type in your broadband username and password. 17. Your broadband username will take the following form: Make sure the following settings are selected, then click Next. Service Broadband username format Plusnet [email protected] Madasafish [email protected] Force9 [email protected] Free-Online [email protected] 19. The modem will now connect to your broadband service using the settings you've provided. This might take a few minutes to complete. Protocol: PPPoA Encapsulation: VC Mux VPI: [0-255]: 0 VCI: [32-65535]: 38 MTU: 1400 5 20. When the modem connects to your service you'll see a congratulations screen. That's it, you’re connected! Web browser based setup If your Quick Installation CD doesn't work, you can set up your modem using a web browser. To start using your service click on the Start Browsing button, or just open your web browser. You can also use this method to update your modem settings after you’ve set it up, or access Advanced Settings. Your broadband settings will be saved in the modem, so you’ll connect whenever the modem is switched on. 1. First, refer to the previous Quick Start section of this guide to plug the hardware in. When done, open your web browser. In the Address line, type in 192.168.1.1, then press Enter. 2. A login page will appear, enter the modem's administration username and password and click Log in. By default the details are: Username: admin Password: admin 6 Item code: 046330 3. From the ADSL setup page you can choose either the Setup Wizard or Manual Setup. Tick Manual Setup. Troubleshooting The following table explains what the modem's status lights mean: Power Power light not on Check the power adapter is plugged in. Check the cable is firmly seated in the back of the modem. Check the plug socket is switched on and working. DSL DSL light flashing or off Check your DSL cable connects your modem to the microfilter. Check that your microfilter is connected properly. Interference caused by other devices on your telephone line are a common cause of problems. For more information about fitting Microfilters visit our support pages at: http://support.plus.net Enter the following settings, then click Apply Settings. Manual ADSL connection Settings: LAN LAN light flashing or off PPoE/PPPoA Check the Ethernet cable is plugged into your modem. PPPoE/PPPoA Internet Connection Type: Check the Ethernet cable is plugged into a network socket on your computer. Username: Your broadband username Password: Your broadband password Connection Type: PPPoA VC-Mux MTU: 1400 Idle Time Out: 0 VPI: 0 VCI: 38 Test with another Ethernet cable, in case there’s a problem with the provided one. Status What the Status light means: See page 5 for the format that your broadband username will take. The status light will flash to indicate that a connection is active. The status light comes on when you first switch the modem on. If the light stays on this means that the modem has failed its internal test and should be restarted. 7