1. No category

The IKM Group 2011
2011 - new opportunities
2010 has now ended and it turned out well, in the end.
I would also this year, like to thank our employees for a
Like everyone else, we were a little sceptical regarding
job well done in 2010. My hope is that this can be
2010, but this proved to be unfounded. After a quiet
continued in 2011 so that we will have another good
period in late winter and early spring orders suddenly
year based on the possibilities we now have!
started rolling in thereafter, throughout the group. It was
especially satisfying that IKM Subsea AS received their
I would also like to thank all our clients for the
first contracts on the Norwegian shelf last year. It has
confidence they have shown in us. In 2010 our turnover
been a long road for us to get into the ROV market, but
was approx. NOK 2,700 million, a result we should be
now we are on the right track and the feedback from
satisfied with considering the financial crisis. Our clients
our clients, now that they have become familiar with our
pay (although some a little late) which must in itself be a
ROVs, is very good!
stamp of quality and vote of confidence. Very positive!
Most satisfying of all was the way we, as an organisa-
In conclusion, I would like to remind everyone that we
tion, came through the effects from the financial crisis
are conscious of our HSE philosophy and HSE targets in
in 2010. We have faced challenges, but they have been
everything we do. With sick leave under 5 % and one
resolved in a good way. The ability to tackle adversity is
LTA our performance is good, but we still have a way to
important and we have shown that we can! We actually
go. Keep up the good work and have this in the back of
increased our turnover in 2010, and this was achieved
your mind, the results will be even better!
without our friends in the Haaland Group. Excellent!
We are looking forward to 2011 with joy and excitement. It will be a year with lots of opportunities.
HSE Policy
• Zero injuries is our overall objective.
• We shall instill trust and confidence among our customers and employees.
• We shall follow acts and regulations, including ethic code of conduct.
• HSE is the most important internal work area.
• No operation has priority over safety.
• HSE is a line responsibility in the entire organisation.
• Everyone is responsible for their own safety and the safety of others.
• We shall prevent pollution and reduce negative environmental impact.
• We shall reduce the amount of waste and optimise the use of resources.
We will achieve this through continuous improvement of all processes and systems established in each organisation.
Together with our clients and suppliers we shall follow statutory regulations and continually improve our procedures
and routines in environmental management.
We believe that social commitment will result in savings for our clients, and new business possibilities for the IKM Group.
Each IKM company shall establish its own objectives in order to live up to the IKM Group’s overall policy.
History
1989
Foundation: Instrumentering Kalibrering og Måleteknisk
Laboratorium AS (originally Hydrotech Laboratorium AS),
renamed to IKM Laboratorium AS
1992
Established: IKM Testing AS
1994
Established: IKM Engineering & Kompetansesenter AS,
IKM Mekaniske AS and IKM Kristiansund AS
1995
Acquisitions: Scana Hydrotech AS and Alfred Paulsen Contracting AS
1996
Acquisitions: IKM Engineering AS (Idavoll AS).
Established: Dept. in Bergen for IKM Testing AS and IKM
Laboratorium AS
1997
Acquisitions: Gjerseth Elektro Contracting AS, Alltex AS
(service dept) and Semco Industri AS.
Established: IKM Stillas AS
1998
Acquisitions: Kystbasen Vedlikeholds Senter AS and Subsea
Design AS. Established: IKM Testing UK Ltd and IKM Testing Asia
Pte. Ltd (Singapore)
1999
Acquisitions: Visman AS and IKM Offshore Development AS
(Offshore Development AS).
IKM Mekaniske AS invests in new workshop in Jåttåvågen
2000
Established: IKM Testing Canada Ltd. and Wellcon AS (34%)
2001
Established: IKM Kran og Løfteteknikk AS
2002
Acquisitions: Everclean International AS, Odim Hitecs dept. for
Industrial-automation, Hitec Instrument (80%) and ACGS Pte. Ltd.
in Singapore. Established: IKM Testing Spain SL.
Share purchase: 34% of Midt-Norsk Stillas AS
2003
Established: IKM Service AS and Merlin Subsea AS.
Merger: IKM Stillas AS and IKM Visman AS merge with
KAEFER Maritim AS. Change of name: KAEFER IKM AS.
Share purchase: 23,29% of Rosenberg Verft AS
2004
Acquisitions: IKM Larsen & Mortensen AS (Steinsvik Maskinindustri, dept. Stavanger), OIS Inspection AS, IKM Ocean
Design AS 51% (former JP Kenny Norge AS) and Textrain (UK) Ltd.
2005
Established: IKM Valves AS.
Demerger: IKM Elektro AS demerges from IKM Gjerseth Elektro
AS, which in turn changes name to IKM Automasjon AS.
Acquisitions: IKM Mekaniske Kristiansund AS (Noomas Offshore AS)
2006
Acquisition: IKM Instrutek AS (Instrutek AS) and IKM.
Morgenstierne AS (Morgenstierne Tekniske AS).
Established: IKM Testing Australia Pty. Ltd.
2007
Acquisition: Subsea Management Systems merged with IKM Consultants AS (Offshore Development AS), IKM Testing dept. Harstad
(Altinex Services AS), IKM Årdal Mekaniske AS (Årdal Mekaniske
Verksted AS) and IKM Production Technology AS (Altinex Reservoir
Technology AS).
Established: IKM Malaysia.
Sale: IKM Automasjon AS and IKM Mekaniske AS, (fabrication dept.)
2008
Acquisition: IKM DSC Engineering AS (DSC Engineering AS), Arne
Bø Pedersen AS (dept. for bolt working) and Jacobsen Services AS
merged with IKM Testng AS.
Sale: KAEFER IKM AS and Rosenberg Verft AS (28,4%)
2009
Acquisition: Moland Mekaniske AS.
Established: IKM Subsea AS, IKM Operations AS, IKM
Maskinering AS (merger of IKM Larsen & Mortensen AS, IKM
Årdal Mekaniske AS and Moland Mekaniske AS)
2010
Acquisitions: Project Partner AS, IKM Technique AS (Technique
AS), IKM Miljøteknikk AS (Miljøteknikk AS) and IKM Haaland Group
AS (Haaland AS, Industrigravøren AS and Haaland Elektronikk AS)
No accidents
No injuries
No exceptions
The IKM Group
ELECTRICAL/
INSTRUMENT/
PROCESS
SUBSEA/
COMPLETION/
COMMISSIONING
ENGINEERING/
OPERATIONS
FABRICATION/
INSPECTION
IKM Elektro AS
(Sola)
IKM Testing AS
IKM Consultants AS
IKM Haaland AS
(Sola)
Dept. Bergen
Dept. Kristiansund
Dept. Hammerfest
(Tananger)
Dept. Bergen
Dept. Horten
(Vigrestad)
IKM Instrutek AS
(Larvik)
IKM Laboratorium AS
(Vigrestad)
IKM Testing Asia Pte. Ltd.
(Tananger)
Dept. Bergen
Dept. Oslo
IKM Industrigravøren AS
IKM Consultants (UK) Ltd.
(Aberdeen)
(Singapore)
(Kristiansand)
Dept. Grimstad
Dept. Grenland
IKM Ocean Design AS
IKM Measurement Services Ltd.
(Aberdeen)
IKM Measurement Services
Asia Pte. Ltd.
(Singapore)
IKM Measurement Services
Australia Pte. Ltd.
(Perth)
IKM Miljøteknikk AS
(Sagvåg)
IKM Products AS
IKM Testing
Australia Pty. Ltd.
IKM Inspection AS
(Stavanger)
Dept. Trondheim
IKM Maskinering AS
(Perth)
IKM Testing Brasil LTDA
IKM Ocean Design
Australia Pty. Ltd
(Rio de Janeiro)
(Perth)
IKM Testing Canada Ltd.
IKM DSC Engineering AS
(St. Johns)
Dept. Halifax
(Tranby)
IKM Testing Kazakhstan LLP
IKM Kran og
Løfteteknikk AS
(Atyrau)
(Tananger)
IKM Testing Spain SL
IKM Operations AS
(Cadiz)
(Stavanger)
IKM Testing (Thailand) Co. Ltd.
IKM Service AS
(Rayong)
(Sola)
(Sola)
Dept. Arendal
Dept. Fyresdal
Dept. Sola
Dept. Tau
IKM Mekaniske
Stavanger AS
(Stavanger)
Dept. Nærbø
IKM Mekaniske
Kristiansund AS
(Kristiansund)
(Sola)
IKM Production
Technology AS
IKM Robertson AS
(Egersund)
IKM Testing UK Ltd.
(Sola)
IKM Technique AS
(Newcastle)
Dept. Aberdeen
IKM Production
Technology Sdn. Bhd
(Sandnes)
PT IKM Indonesia
(Kuala Lumpur)
(Batam)
IKM Valves AS
IKM Subsea AS
(Stavanger)
Dept. Bergen
(Bryne)
IKM Subsea Malaysia
(Kuala Lumpur)
IKM Subsea Singapore
(Singapore)
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
4000
IKM Invest
670
IKM EIENDOM AS
Commercial property
IKM INDUSTRIINVEST AS
3500
Company investments
AconaWellpro AS (21%)
North Energy AS (3%)
ScanFarm AS (67%)
Ingenium AS (34%)
Noreco ASA (6%)
Residential property
Development Projects
Company investments
504
670
3000
250
2500
Founds
Hansa Property Group (15,6%)
Energy Ventures III
Energy Ventures IV
Acta
The turnover for IKM Invest
comprises companies where
IKM’s owner share is 20%
or more.
926
830
2000
1500
1300
1023
1000
500
578
658
0
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
B2011
Mill. NOK
Electrical / Instrument / Process
PRODUCT SALES
• Supply house
• Instrumentation/electro/electronics/automation
• Subsea/topside valves
• Flow/level instruments
• Measurement/testing equipment
• Electrical motors/transformers
• Thermography equipment
• Transformer surveillance
• Calibration/environmental instruments
• Navigation/communication
PRODUCTION
• System integration
• Electrical motors/transformers/generators
• Electrical subsea motors/transformers
• Pressurised containers
• Control/enclosure panels
• Valve parts/valve repair
• High pressure sample bottles
• Subsea HPU’s
• Subsea el. actuators
• Electrical/hydraulic control systems
IKM Elektro AS
IKM Instrutek AS
IKM Laboratorium AS
IKM Measurement Services Ltd.
IKM Measurement Services Asia Pte. Ltd.
IKM Measurement Services Australia Pte. Ltd.
IKM Miljøteknikk AS
IKM Products AS
IKM Production Technology AS
IKM Production Technology Sdn. Bhd.
IKM Valves AS
SERVICE, INSTALLATION AND CALIBRATION
• Pressure, temp, flow, electrical, mechanical and gas density
• Electrical parameters
• Valve Site Service (VSS)
• Pressure safety valves (PSV)
• Navigation/maritime communication (maritime equipment)
• Projecting (new build)
• Field instrumentation
• Emission measurements (NOx)
PROCESS AND WELL TECHNOLOGY
• Data sampling (pressure, temp, flow, chemical analysis)
• On-site PVT
• Well integrity (monitorering/analysis)
• Process surveillance
RENTAL EQUIPMENT/PERSONNEL
TRAINING COURSES
Subsea / Completion / Commissioning
SUBSEA
• Trencher operations
• ROV operations
• Survey and Inspection services
• Offshore management
• Manufacture of subsea equipment
• Sale of ROV’s
• Pigging/pipeline inspection/RFO
• Scale squeeze services
• Cuttings transport system (CTS)
TOPSIDE
• Pressure and vacuum testing
• Chemical cleaning
• Oil flushing/oil cleaning
• Nitrogen services (N2/He leak testing)
• Umbilical services
• Video inspection
• Bolt working services
• Decommissioning/passivation
• Preservation
• Water as a tool/hydrojetting
• Air Treatment
• Pipe labelling/flow coding
• Certification of accumulators
• Maintenance of heat exchangers
• HVAC cleaning
• Pipe freezing
• Vacuum Tank Cleaning System (VTCS)
• Cleaning of slop water (X-clean)
• Cold cutting/cutting services
• Cutting/bevelling/flange facing
RENTAL
• Pumps and tanks
• Inspection equipment
• Bolt working equipment
• Drying and filter units
• Flanges and plugs
• Air treatment units
• Testing equipment
TRAINING COURSES
IKM Testing AS
IKM Testing Asia Pte. Ltd.
IKM Testing Australia Pty. Ltd.
IKM Testing Brasil LTDA
IKM Testing Canada Ltd.
IKM Testing Kazakhstan LLP
IKM Testing Spain SL
IKM Testing Thailand Co. Ltd.
IKM Testing UK Ltd.
PT IKM Indonesia
IKM Subsea AS
IKM Subsea Malaysia
IKM Subsea Singapore
Engineering / Operations
CONSULTANCY SERVICES
(field development/new build, operation and maintenance)
• Multidiscipline engineering services
• Project management and project control
• Procurement and contract services
• Logistics and MA services
• Subsea and marine, drilling and well
MARINE PIPELINE ENGINEERING
• Subsea and pipelines:
- Field development
- Engineering/design of marine pipelines
- Installation engineering
- Subsea production systems
• Design and construction of:
- Subsea structures
- Tie-in modules/systems
- Subsea manifold systems
IKM Consultants AS
IKM Consultants (UK) Ltd.
IKM Ocean Design AS
IKM Ocean Design Australia Pty. Ltd
IKM DSC Engineering AS
IKM Kran og Løfteteknikk AS
IKM Operations AS
IKM Service AS
Engineering and toTAl delivery of passive
fire and BLAST protection SYSTEMS
CRANE AND LIFTING SERVICES
• Maintenance, modifications and certification of:
- Offshore/ship cranes, lifting equipment
- Lifeboats/mobboats/lifesaving equipment
• Supply/rental of lifting equipment
• Delivery of related engineering, mechanical work/fabrication
OFFSHORE OPERATION SUPPORT AND SERVICE PERSONNEL
• Crane operators
• Mechanics
• Flag men
• Heliguards
CUSTOMISED OPERATION SUPPORT TO OPERATORS
• Operations/maintenance and service personnel
• Operations and maintenance support
• Maintenance management
• Maintenance concepts
• Spare part strategy
• Maintenance planning
• Engineering Support all Disciplines
• Lifecycle studies
• Risk evaluation and RBI analysis
Fabrication / Inspection
CNC-MACHINING
• CNC thin plate machining
• 3D measuring
MECHANICAL INDUSTRY
• Maintentance and modifications
• Sheet metal/welding and machining
• Fabrication and Installation
• Mechanical design / 3D modelling
• Fabrication of stainless steel products
• Contracting personnel
• Material handling and lifting equipment
ELECRICAL
• Electronic products
INSPECTION
• NDT/Material inspection
• Third party verification
SUBSEA
• Rov-tooling
• Inspection services
• Construction of subsea equipment
IKM Haaland AS
IKM Industrigravøren AS
IKM Inspection AS
IKM Maskinering AS
IKM Mekaniske Stavanger AS
IKM Mekaniske Kristiansund AS
IKM Robertson AS
IKM Technique AS
Our focus is growth!
Electrical/
Instrument/
Process
Subsea/
Completion/
Commissioning
IKM Elektro AS
Skvadronveien 24, 4050 Sola, Norway
T: +47 51 81 17 30
E: [email protected]
IKM Testing AS
Ljosheimvegen 14, 4050 Sola, Norway
T: +47 51 64 90 00
E: [email protected]
IKM Instrutek AS
Elveveien 28, 3262 Larvik, Norway
T: +47 33 16 57 00
E: [email protected]
Dept. Bergen
Ågotnes Industripark
Pb. 97, 5346 Ågotnes, Norway
T: +47 56 31 27 70
E: [email protected]
IKM Laboratorium AS
NorSea Base, Bygg 53
Pb. 124, 4098 Tananger, Norway
T: +47 51 71 95 00
E: [email protected]
Dept. Bergen
Ågotnes Industripark
Pb. 97, 5346 Ågotnes, Norway
T: +47 56 31 27 70
E: [email protected]
Dept. Oslo
Olaf Helsetsvei 1
0694 Oslo, Norway
T: +47 22 78 27 40
E: [email protected]
IKM Measurement Services Ltd.
Howe Moss Terrace, Kirkhill Industrial Estate
Dyce, Aberdeen, AB21 0GR
United Kingdom
T: +4 41 22 47 93262
E: [email protected]
Dept. Kristiansund
NorSea Vestbase, Pb. 2223
6503 Kristiansund, Norway
T: +47 71 58 07 60
E: [email protected]
Dept. Hammerfest
Brenneriveien 10
9600 Hammerfest, Norway
T: +47 51 64 13 90
E: [email protected]
IKM Testing Asia Pte. Ltd.
117 Defu Lane 10
Singapore 539229
T: +65 6777 8803
E: [email protected]
IKM Testing Australia Pty. Ltd.
33 Kewdale Road
Welshpool WA 6106 Australia
T: +61 8 9452 6100
E: [email protected]
IKM Measurement Services
Asia Pte. Ltd.
117 Defu Lane 10
Singapore 539229
T: +65 6777 8803
E: [email protected]
IKM Testing Brasil LTDA
Rua Lauro Muller no116, Sala 2401
Torre do Rio Sul-Botafogo, Rio de Janero
CEP: 22290, 160, Brasil
T: +55 (21) 3544 0000
E: [email protected]
IKM Measurement Services
Australia Pte. Ltd.
33 Kewdale Road
Welshpool WA 6106 Australia
T: +61 8 9452 6100
E: [email protected]
IKM Testing Canada Ltd.
40 St. Anne’s Crescent
Paradise, NL A1L 1K1, Canada
T: +1 709 782 5051
E: [email protected]
IKM Miljøteknikk AS
Rindane 9,
Pb.23, 5408 Sagvåg, Norway
T: +47 918 84 532
E: [email protected]
IKM Products AS
Skvadronveien 24
4050 Sola, Norway
T: +47 51 20 23 00
E: [email protected]
IKM Production
Technology AS
Skvadronveien 24
4050 Sola, Norway
T: +47 51 64 13 40
E: [email protected]
IKM Production
Technology Sdn. Bhd
1-10, Impian Kota, Jalan Kg Attap
50460, Kuala Lumpur, Malaysia
T: +601 9650 6949
E: [email protected]
IKM Valves AS
Gamle Forusvei 25
4033 Stavanger, Norway
T: +47 51 71 95 20
E: [email protected]
Dept. Bergen
O J Brochs gate 10
5006 Bergen, Norway
T: +47 55 69 11 34
E: [email protected]
Dept. Halifax
30 Colford Drive, PO Box 100, Head
Chezzencook, NS, B0J 1N0, Canada
T: +1 902 827 2587
E: [email protected]
IKM Testing Kazakhstan LLP
Atyrau, Republic of Kazakhstan
Atambaeva street, 12/A
T: +7 (7122) 25 15 69
E: [email protected]
IKM Testing Spain SL
Poligono Industrial «El Trocadero»
C/Holanda, Nave 23
C.P. 11510 Puerto Real, Cadiz, Spain
T: +34 956 47 47 41
E: [email protected]
IKM Testing (Thailand) Co. Ltd.
72/2 Moo 3, Phala Sub-district
Banchang District, Rayong 21130, Thailand
T: +66(0) 38601 996/997
E: [email protected]
IKM Testing UK Ltd.
42 Colbourne Crescent
Nelson Park Industrial Estate,
Cramlington, Northumberland NE23 1WB,
United Kingdom
T: +44 1670 707 265
E: [email protected]
Dept. Aberdeen
Unit 47, Howe Moss Terrace, Kirkhill
Industrial Estate, Dyce, Aberdeen
AB21 0GR, United Kingdom
T: +44 1224 72 5599
E: [email protected]
PT IKM Indonesia
Ruko Bukit Beruntung
Block C, no. 2, Batam, Indonesia
T: +65 6777 8803
E: [email protected]
IKM Subsea AS
Nordlysveien 3
4340 Bryne, Norway
T: +47 51 64 90 00
E: [email protected]
IKM Subsea Malaysia
1-10 Impian Kota, Jalan Kampung Attap
50460 Kuala Lumpur, Malaysia
T: +60 196506949
E: [email protected]
IKM Subsea Singapore
117 Defu Lane 10
Singapore 539229
T: +65 96607629
E: [email protected]
Engineering/
Operations
Fabrication/
Inspection
IKM Consultants AS
Tankbåtvegen 1
4056 Tananger, Norway
T: +47 51 69 51 00
E: [email protected]
IKM Haaland AS
Skogateigen 28
4362 Vigrestad
Pb. 23, 4369 Vigrestad, Norway
T: +47 51 79 20 00
E: [email protected]
Dept. Bergen
O J Brochs gate 10
5006 Bergen, Norway
T: +47 55 69 11 34
E: [email protected]
Dept. Horten
Storgt. 38
3182 Horten, Norway
T: +47 33 04 27 40
E: [email protected]
IKM Consultants (UK) Ltd.
Rubislaw Den House
23 Rubislaw Den North, Aberdeen
Scotland AB15 4AL
T: +4 41 22 43 29080
E: [email protected]
IKM DSC Engineering AS
Dølasletta 3
3408 Tranby, Norway
T: +47 32 22 65 80
E: [email protected]
IKM Kran og
Løfteteknikk AS
Tankbåtvegen 1
4056 Tananger, Norway
T: +47 51 64 81 00
E: [email protected]
IKM Ocean Design AS
Vassbotnen 1, Pb. 99
4064 Stavanger, Norway
T: +47 51 21 21 00
E: [email protected]
Dept. Trondheim
Pb. 326, Sentrum
7402 Trondheim, Norway
T: +47 73 19 72 00
E: [email protected]
IKM Ocean Design
Australia Pty. Ltd
33 Kewdale Road,
Welshpool WA 6106 Australia
T: +61 08 9452 6100
E: [email protected]
IKM Operations AS
Vassbotnen 1
4313 Sandnes, Norway
T: +47 51 64 90 00
E: [email protected]
IKM Service AS
Ljosheimvegen 14
4050 Sola, Norway
T: +47 51 64 90 00
E: [email protected]
IKM Invest AS
IKM Invest AS
Skagenkaien 1
4006 Stavanger, Norway
T: +47 51 64 13 80
E: [email protected]
IKM Industrigravøren AS
Fabrikkvegen 6
4362 Vigrestad
Pb. 23, 4369 Vigrestad, Norway
T: +47 51 48 72 30
E: [email protected]
IKM Inspection AS
Lumberveien 51 B
Pb. 8048, Vågsbygd
4675 Kristiansand, Norway
T: +47 38 01 91 50
E: [email protected]
Dept. Grimstad
c/o Nymo Mek. Verksted AS
Pb. 113, 4891 Grimstad, Norway
T: +47 37 29 24 80
E: [email protected]
Dept. Grenland
Strømtangveien 11 B
3950 Brevik, Norway
T: +47 35 55 75 70
E: [email protected]
IKM Maskinering AS
Ljosheimvegen 14
4050 Sola, Norway
T: +47 51 64 90 00
E: [email protected]
Dept. Arendal
Bedriftsveien 13, Krøgenes
4841 Arendal, Norway
T: +47 37 03 68 02
E: [email protected]
Dept. Fyresdal
3870 Fyresdal, Norway
T: +47 35 04 15 00
E: [email protected]
Dept. Sola
Tankbåtvegen 1
4056 Tananger, Norway
T: +47 51 94 49 00
E: [email protected]
Dept. Tau
Breivikveien 17, Nordmarka
4120 Tau, Norway
T: +47 51 75 44 44
E: [email protected]
IKM Mekaniske
Stavanger AS
Jåttåflaten 10
4020 Stavanger, Norway
T: +47 51 82 56 00
E: [email protected]
Dept. Nærbø
Bjorhaug Vest
4365 Nærbø, Norway
T: +47 51 79 17 20
E: [email protected]
IKM Mekaniske
Kristiansund AS
Dalegaten 137
6518 Kristiansund, Norway
T: +47 70 33 14 00
E: [email protected]
IKM Robertson AS
Nyåskaiveien 2
4370 Egersund, Norway
T: +47 51 79 17 50
E: [email protected]
IKM Technique AS
Torneroseveien 12
4315 Sandnes, Norway
T: +47 51 80 05 20
E: [email protected]
Contact Information