Pcounter Embedded
Xerox Firmware Compatibility Chart
10/08/2014
Introduction
In order to promote consistent behavior, AND Technologies has done a great deal of firmware testing with Xerox
MFPs. The results are listed below in a continuously updated chart of firmware and model features. The firmware
levels we recommend should be used when Pcounter XAudit will be used for authentication and/or accounting.
Pcounter Embedded for Xerox (XAudit) Documentation
All Pcounter/Xerox documentation can be found at: www.pcounter.com/supportfiles/pcxaguides.zip
Fiery Support
Some MFP models support an attached Fiery RIP. When a fiery is involved, Pcounter Embedded is only supported
when the fiery and MFP are in a dual IP configuration where both the MFP and Fiery each have their own, unique,
reachable IP address. Also, Fiery support requires full Pcounter, LE does not support Fiery attached MFPs.
Model
This is the Xerox model number. In most cases you will see XX for the engine speed. This means that capabilities
and firmware versions are consistent across all speeds of that engine. In some cases, such as the 4250 and 4260
models, we have them listed separately due to firmware inconsistencies.
EIP Support
If EIP is Available, those Xerox units can utilize the Print Release/ Pull Printing EIP app for print jobs release. This
app also allows for deletion of unwanted jobs, and reprint of saved jobs.
If EIP is not available for a Xerox model, Print Release/ Pull Printing is still possible using the automatic release
option. All jobs held for the user print immediately at user login. Without EIP though, the user will have no way to
delete unwanted jobs, or save jobs for reprint.
Certified Firmware
This shows the firmware level recommended by AND Technologies for embedded support. If the firmware level on
the machines currently is older or newer than the recommended level, we first recommend testing the currently
installed firmware before down- or up-grading. It is possible other versions of firmware will not have issues.
However, if an issue is encountered on a non-recommended firmware level, the first step will be to change to a
recommended level.
Tracking Capabilities
Not all the Xerox units sold are capable of tracking outgoing fax, but all should be capable of tracking copy, print,
and scan. Please refer to the list to check if that function is tracked. In the case of faxes, all units will track
incoming faxes as a print job with no user info, but only the units that say “Yes” under fax will track outgoing faxes.
NOTE. For any and all tracking, Xerox’s Network Accounting module is required. Without Network Accounting,
authentication is possible, but not logging.
1
Pcounter Embedded - Xerox Firmware Compatibility Chart | AND Technologies
Pcounter Embedded
Xerox Firmware Compatibility Chart
Models
Certified Firmware
USB
Reader
Copy
Print
Scan
Fax
Dual IP
Fiery
Phaser 3635
20.105.21.000
Yes
Yes
Yes
Yes
-
No
D95 / D110 / D125
25.0.41
Yes
Yes
Yes
Yes
Yes
No
Color C75
75.0.31
Yes
Yes
Yes
Yes
-
Yes
Yes
Yes
Yes
Yes
-
Yes
Yes
Yes
Yes
Yes
-
No
No
Yes
Yes
Yes
-
No
Yes
Yes
Yes
Yes
-
No
Yes
Yes
Yes
Yes
-
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
-
No
Yes
Yes
Yes
Yes
-
No
Color 5xx
ColorQube 87xx/89xx
ColorQube 92xx
ColorQube 93xx
WorkCentre 3655
WorkCentre 53xx
WorkCentre 57xx
WorkCentre 58xx
55.21.81
55.30.13
071.161.024.02900
071.161.034.06000
061.050.222.10002
071.180.024.02900
071.180.034.06000
072.060.034.16800
53.10.32
53.20.41
061.132.223.13300
061.132.224.01001
071.190.024.02900
071.190.034.06000
WorkCentre
5945/5955
071.090.004.06501
Yes
Yes
Yes
Yes
-
No
WorkCentre 6655
072.110.044.20500
Yes
Yes
Yes
Yes
-
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
-
No
Yes
Yes
Yes
Yes
-
No
Yes
Yes
Yes
Yes
-
No
Yes
Yes
Yes
Yes
-
Yes
Yes
Yes
Yes
Yes
-
Yes
Yes
Yes
Yes
Yes
-
No
WorkCentre 71xx
WorkCentre
7220/7225
WorkCentre 75xx
WorkCentre 77xx
WorkCentre 7830/35
WorkCentre 7845/55
WorkCentre 7970
71.22.43
71.22.52
071.030.024.02900
071.030.034.06000
061.121.222.32600
061.121.223.36000
061.090.223.21400
071.010.103.35100
071.010.034.06000
071.040.024.02900
071.040.034.06000
072.200.024.14107
*See chart on page four for a full list of supported USB reader models.
2
Pcounter Embedded - Xerox Firmware Compatibility Chart | AND Technologies
Pcounter Embedded
Xerox Firmware Compatibility Chart
LEGACY MODELS
Models
Certified Firmware
USB
Reader
Copy
Print
Scan
Fax
Dual IP
Fiery
WorkCentre
4112/4127
9.3.2
No
Yes
Yes
Yes
-
No
No
Yes
Yes
Yes
-
No
15.003.56.000
WorkCentre 4250
15.003.67.000
WorkCentre 4260
30.105.08.000
No
Yes
Yes
Yes
-
No
WorkCentre 51xx
021.120.065.00180
No
Yes
Yes
Yes
-
No
WorkCentre 5222
1.207.131
No
Yes
Yes
Yes
Yes
No
WorkCentre 5230A
1.227.122
No
Yes
Yes
Yes
Yes
No
WorkCentre 56xx
single
25.054.053.00000
025.054.060.00075
No
Yes
Yes
Yes
-
No
WorkCentre 56xx dual
21.120.65.170
No
Yes
Yes
Yes
-
No
Yes
Yes
Yes
Yes
-
No
No
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
WorkCentre 6400
WorkCentre
7232/7242
WorkCentre 73xx
USB Minimum =
061.070.103.35000
1.207.5
1.207.111
1.227.4
1.227.169
WorkCentre 74xx
75.14.13
Yes
Yes
Yes
Yes
Yes
Yes
WorkCentre 76xx
040.033.53240
No
Yes
Yes
Yes
-
No
*See chart on page four for a full list of supported USB reader models.
3
Pcounter Embedded - Xerox Firmware Compatibility Chart | AND Technologies
Pcounter Embedded
Xerox Firmware Compatibility Chart
Xerox USB Card Reader Support
This table from Xerox lists all supported USB card reader models and associated card types that have been
validated.
Note: Additional card types may exist but would require validation.
Note: Only card readers purchased through AND Technologies are supported by AND Technologies.
Xerox USB Card Reader Plug In Download Link: (For 53xx/71xx Series MFPs)
http://www.support.xerox.com/support/workcentre-5300-series/filedownload/enus.html?operatingSystem=win7&fileLanguage=en&contentId=122708&from=downloads&viewArchiv
ed=false
4
Pcounter Embedded - Xerox Firmware Compatibility Chart | AND Technologies