Lexmark C74x/X74x Product Overview and Changes For Training Use only Topics • • • • • Product Overview C73x vs. C74x X73x vs. X74x Hardware Changes Firmware Code Changes For Training Use Only Lexmark C746n, C746dn, C746dtn Overview Performance Print Technology Connectivity 35/35 ppm 9s TTFP, 20s from sleep 800 MHz Power PC 256 MB memory standard, 1.25GB max User Flash Tandem Color Laser Belt Fuser Gigabit Ethernet & High-speed USB 2.0 Front USB-A w/ Pictbridge function 1 ISP + slot for hard drive Optional: Serial, Parallel, Fiber, Wireless Op Panel Print Quality 2.4” Color APA, backlight, Numeric pad True 1200x1200 dpi 4800 Color Quality Fonts Full PCL and PS3 font load Font Cards Paper Handling Bond, Recycled, Card Stock, Transparency, Labels, Envelope Banner Support 650 sheet standard input 4300 sheet max 300 sheet output Duplex (dn, dtn) Optional 2000 sheet tray, SMT Datastream/Firmware PS 3, PCL 6, PPDS, PDF, JPG, TIFF, XPS DLE’s Bar code, PrintCryption Chinese Forms Card Duty Cycle 1500/9200 average duty cycle 85K max duty cycle Supplies SWE: 4K color / 4K mono Aftermarket: 12K mono / 7K color PC Drums: 20K For Training Use Only Size and Acoustics Warranty 1 yr. onsite 17.7”H x 17.1”W x 15.0”D 54.5 lb 53(running) / 31(idle) dBA Quiet Mode 47 dBA Lexmark C748e, C748de, C748dte Overview Performance Print Technology Connectivity 35/35 ppm 9s TTFP, 20s from sleep 800 MHz Power PC 512 MB memory standard, 1.54GB max User Flash eSF Tandem Color Laser Belt Fuser Gigabit Ethernet & High-speed USB 2.0 Front USB-A w/ Pictbridge function Rear USB-A for Card Reader 1 ISP + slot for hard drive Optional: Serial, Parallel, Fiber, Wireless Op Panel Print Quality 4.3” Touch Screen, Numeric pad, Speaker True 1200x1200 dpi 4800 Color Quality Fonts Full PCL and PS3 font load Font DIMM/SIMM support Font Cards Paper Handling Bond, Recycled, Card Stock, Transparency, Labels, Envelope Banner Support 650 sheet standard input 4300 sheet max 300 sheet output Duplex (de, dte) Optional 2000 sheet tray, SMT Datastream/Firmware PS 3, PCL 6, PPDS, PDF, JPG, TIFF, XPS DLE’s Bar code, PrintCryption Chinese Forms Card Duty Cycle 2500/10000 average duty cycle 100K max duty cycle Supplies SWE: 12K mono / 10K color Aftermarket: 12K mono / 7K/10K color PC Drums: 20K For Training Use Only Size and Acoustics Warranty 1 yr. onsite 17.7”H x 17.1”W x 15.0”D 54.5 lb 53(running) / 31(idle) dBA Quiet Mode 47 dBA Lexmark X746de, X748de, X748dte Overview Performance Print Technology Connectivity 35/35 ppm 9s TTFP, 20s from sleep 800 MHz Power PC 256 MB memory standard, 1.25GB max User Flash Tandem Color Laser Belt Fuser Standard - 1 ISP + slot for hard drive, 1GB Ethernet USB 2.0 High speed (Device, Front, Card reader) Optional – 160+GB HD (Optional) Optional – Serial, Parallel, Fiber, Wireless Gigabit Print Quality Op Panel True 1200x1200 dpi 4800 Color Quality 7” Color e-Task WVGA, 10-digit numeric keypad Paper Handling Fonts Bond, Recycled, Card Stock, Transparency, Labels, Envelope Banner Support 650 sheet standard input ADF/RADF: 50 Standard Output: 250 Optional Input: 550 Tray, 2000 High Capacity Feeder, Special Media Drawer Full PCL and PS3 font load Font Cards Datastream/Firmware PS 3, PCL 6, PPDS, PDF, JPG, TIFF, XPS DLE’s Duty Cycle C746 Max Duty: 85K/month C746 Average: 1500-9200 pages/month C748 Max Duty: 100K/month C748 Average: 2500 – 10,000 pages/month Bar code, PrintCryption Chinese Forms Card Supplies C746 SWE : 6K color/6K black C748 SWE: 10K color/12K black Black AM Toner: 12K CMY AM Toner: 7K or 10K PC Drums: 20K For Training Use Only Size and Acoustics Warranty 1 yr. onsite 543W x 608D x 788H (mm x mm x mm) 97lbs (43.1kg), Goal 53dBA / 31dBA Lexmark C734/C736 vs. C746/C748 2009 C736n, dn, dtn 35/35 ppm 33/33 ppm A4 C734n, dn, dtn 30/30 ppm 28/28 ppm A4 For Training Use Only Enhancements 4.3” Color Touch Screen eSF Standard Card Reader Support Standard Faster Processor More Memory Higher SWE Toner Contextual Sound Faster Speed Faster TTFP New 2.4” Color Display Faster Processor Gigabit Networking Higher AM Yield Mono and Color Toner dn and de models add duplex dtn and dte models add a 550 sheet tray 2012 C748e, de, dte 35/35 ppm 33/33 ppm A4 C746n, dn, dtn 35/35 ppm 33/33 ppm A4 4.3” Touch w/ eSF More Memory Higher SWE Lighter AM Cartridges Lower CPP Lexmark X736/X738 vs. X746/X748 2009 X738de, dte 35/35 ppm 33/33 ppm A4 X736de 35/35 ppm 33/33 ppm A4 For Training Use Only Enhancements Faster Processor Gigabit Networking User Print Quota Support Higher SWE Toner Contextual Sound Hibernate Mode Print Preview Post Job Process Faster Processor Gigabit Networking Higher AM Yield Mono and Color Toner Contextual Sound Hibernate Mode Print Preview Post Job Process 2012 X748de, dte 35/35 ppm 33/33 ppm A4 X746de 35/35 ppm 33/33 ppm A4 Hard Drive Standard Higher SWE Higher AM Cartridges Lower CPP Hardware Changes - Fuser The C73x/X73x Fusers had a screw on the Duplex Guide which made it difficult for customers to access accordion jams. The C74x/X74x fusers do not have this screw so the guide can be opened for easy access into the fuser. To open the guide, simply move the release lever and unlock the guide pin C73x/X73x Screw C74x/X74x No Screw These new fusers are compatible with the C73x and X73x printers. In time, only the new fusers will be available as a replacement part for the C73x/X73x. If this pin is not in its “Locked” position, the Fuser will not install. For Training Use Only Hardware Changes – Cartridge Contacts To eliminate problems with errors associated with the cartridge contacts, the old copper colored contacts in the C73x/X73x machine and Toner Cartridges are replaced with plated silver ones. In addition, the printer contacts can now be ordered as replaceable FRUs. C73x/X73x Contacts C73x/X73x Contacts C74x/X74x Contacts C74x/X74x Contacts Continued on next page For Training Use Only Hardware Changes – Cartridge Contacts con’t Below are pictures of the Toner Cartridges with different contacts. C74x/X74x Contacts C73x/X73x Contacts C74x/X74x Contacts C73x/X73x Contacts For Training Use Only Hardware Changes – MPF Pick Assembly The MPF Pick arm is redesigned on the C74x/X74x to be more durable and to allow for easy removal. Now, to remove the MPF Pick Arm, squeeze the green release lever and slide it off the shaft. MFP Pick Arm Green Release Lever Squeeze the Green release lever MPF Pick Arm removed Continued on next page For Training Use Only Hardware Changes – MPF Pick Assembly con’t For comparison, here is the C73x/X73x MFP Pick Arm compared to the C74x/X74x. C73x/X73x MFP Pick Arm C74x/X74x MFP Pick Arm For Training Use Only Hardware Changes – MPF Empty Sensor To improve the MPF, a paper empty sensor now detects when the MPF is empty. An actuator inside the opening of the tray springs upward when the tray is empty. MFP Empty Sensor MFP Empty Sensor Actuator For Training Use Only Hardware Changes – Duplex Edge Guide A slight change is made to the Duplex Edge Guide in the C74x/X74x. C73x/X73x Duplex Edge Guide C74x/X74x Duplex Edge Guide For Training Use Only Hardware Changes – Scanner Lamp Although the scanner looks identical to the X73x, the lamp light source uses an LED instead of a Xenon lamp in the X74x models. The procedure for servicing the scanner is the same if the CCD should need replacement. For Training Use Only Hardware Changes – C74x Power Consumption The C74x has improvements for reduced power consumption. The power consumption levels listed in the table below represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average. Values are subject to change. See www.lexmark.com for current values. Power Consumption by Mode: Mode Description Power consumption (Watts) Printing The product is generating hard-copy output from electronic inputs. Simplex = 535 W Duplex = 420 W Copy The product is generating hard-copy output from hard-copy original documents. 600 W ADF Scan The product is scanning hard-copy documents. 85 W Ready The product is waiting for a print job. 48 W Sleep Mode The product is in a high-level energy-saving mode. C746 = 6.8 W C748 = 7.3 W Hibernate The product is in a low-level energy-saving mode. 0.55 W Off The product is plugged into a wall outlet, but the power switch is turned off 0.0 W Note: Some modes do not apply to every model. The power consumption levels listed in the table represent timeaveraged measurements. Instantaneous power draws may be substantially higher than the average. Values are subject to change. See www.lexmark.com for current values. For Training Use Only Hardware Changes – X74x Power Consumption The X74x has improvements for reduced power consumption. The power consumption levels listed in the table below represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average. Values are subject to change. See www.lexmark.com for current values. Power Consumption by Mode: Mode Description Power consumption (Watts) Printing The product is generating hard-copy output from electronic inputs. 560 W Simplex 435 W Duplex Copy The product is generating hard-copy output from hard-copy original documents. 600 W ADF Scan The product is scanning hard-copy documents. 85 W Ready The product is waiting for a print job. 55 W Sleep Mode The product is in a high-level energy-saving mode. 11.0 W Hibernate The product is in a low-level energy-saving mode. 0.5 W Off The product is plugged into a wall outlet, but the power switch is turned off 0.0 W Note: Some modes do not apply to every model. The power consumption levels listed in the table represent timeaveraged measurements. Instantaneous power draws may be substantially higher than the average. Values are subject to change. See www.lexmark.com for current values. For Training Use Only Hardware Changes – Power Consumption con’t Sleep Mode The printers are designed with an energy-saving mode called Sleep Mode. Sleep Mode saves energy by lowering power consumption during extended periods of inactivity and automatically engages after a specified period of time. Factory default Sleep Mode Timeout = 30 minutes By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 240 minutes. • Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. • Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy. Hibernate Mode Hibernate is an ultra-low power operating mode. When operating in Hibernate mode, the printer is essentially off, and all other systems and devices are powered down safely. The printer will not respond to faxes, print jobs or other cues that would normally “wake” the printer when in sleep mode. By default, Hibernate Mode is not enabled. You can enable through the embedded web server or operator panel menus: Settings > General Settings > Sleep Button Settings For Training Use Only Code Changes The C74x/X74x uses a different firmware code than it’s predecessor, the C73x/X73x. The menus are slightly different as well as some error codes. Lexmark is transitioning all laser printers to a standardized error code scheme to make error reporting more consistent throughout all products. If you have previous experience on the C73x/X73x, keep in mind that the error codes may not mean the same thing on the C74x/X74x. In addition, if you need to update code on a 73x or 74x printer, make sure you use the correct code as the 73x code is not compatible with the 74x and vice versa. For Training Use Only