Paige Electric

PAIGE ELECTRIC
Paige Electric
From microminiature fiber to the largest diameter extra high-voltage cable, Paige Electric is there to
design, engineer, and deliver the complete spectrum of electrical and electronic cable, cable assemblies and complementary products to fit your needs. Paige’s participation in every facet of the wire
world puts them ahead of the trends in wire technology and keeps their product line current and
competitive.
Channel Letter Splice
The Channel Letter Splice from Paige Electric was designed specifically for low voltage splice applications is
quick and easy to use. Installation is a breeze - you only need a pliers for install!
Features and Benefits
•
•
•
•
•
•
•
Involves no stripping of wires
Allows for one power input and 2 output wires
Will accommodate wires from 16AWG to 22 AWG
Rated for 600 volts
Insulation does not shrink back after install
Eliminates copper exposure to oxygen and moisture
Waterproof, anti-corrosion gel operates from -40˚C to 105˚C and protects the electrical connection from
moisture
• Ul & c(UL) listed
WIRE RANGE
Outer Ports
Center Ports
AWG
mm²
AWG
mm²
22 to 16 - solid or stranded
0,3 to 1,3 - solid or stranded
22 to 16 - solid or stranded
0,3 to 1,3 - solid or stranded
Paige Plus LED Cable Box
Paige Electric’s “Use Anywhere” Power Supply Box is designed for just that it’s UL listed for Wet, Damp & Dry locations, so you can put it anywhere!
Features and Benefits
•
•
•
•
For use with LED Power supplies and electronic neon transformers
Will accommodate 1-2 standard size LED power sources
Smaller size makes it more manageable in tight spaces
Front loading allows vertical placement and transformers to be installed
later
• Transformer attachment plate in back allows installation without damaging the integrity of the box
• Holes in the bottom allow for natural ventilation
• Allows 1 or 2 transformers to be installed in the box
10.11
Material
Outside Dimensions
(H x W x D)
Inside Dimensions
(H x W x D)
22/24 ga. Galvanized
2 piece box
12” x 6” x 5.5”
11” x 4.75” x 2.5”
Lower Shelf (??)
pre-punched for two 13/16” diameter holes
space avail. for 2 extra field drilled 1/6” holes
PAIGE ELECTRIC
Paige Electric
Paige Plus LED Cable
Paige Plus LED Cable consists of a 2 conductor 18 AWG stranded bare copper conductor insulated with
Polyvinyl Chloride and is type PLTC and RoHS Compliant. Comes in 250 ft. 1 Pac Boxes and 1000’ reels.
Paige Plus Premium LED Cable
Paige Plus Premium LED Cable is an all inclusive
channel letter wiring method with built in bonding
wire NED Code Compliance. This cable consists of a 2 conductor 18 AWG stranded bare copper conductor
insulated in Polyvinyl Chloride and a 14 AWG stranded bare copper conductor in a zip style Polyvinyl
Chloride jacket. Comes in 250 ft. 1 Pac Boxes and 1000’ reels.
Features and Benefits
•
•
•
•
•
costs less in total material costs, shop labor and field installation
meets all NED Code Compliance requirements for electrical signage
meets 720 hour sunlight resistant requirement of UL
strips easily and cleanly
sequentially surface printed to show exact footage used and remaining
Paige Plus Cable Specs
Paige Plus
LED Cable
Paige Plus
Premium
LED Cable
10.11
Material
Insulation
Cabling
Overall
Lay
Nominal
Cabling
Diameter
Final Jacket
Temp/
Voltage
Bare Copper, 18
AWG, stranded
Polyvinyl Chloride,
.015” wall thickness
O.D. .076” nom.
Black and Red
2.5” left
hand lay
.151”
Black Polyvinyl Chloride
.035” nom. wall thickness
O.D. .221”
105˚C /
300V
Comp A
Bare Copper, 18
AWG, stranded
Polyvinyl Chloride,
.015” wall thickness
O.D. .076” nom.
Black and Red
2.5” left
hand lay
-
Light Blue Polyvinyl Chloride
.035” nom. wall thickness
O.D. .225” x .384”
105˚C /
300V
Comp B
Bare Copper, 14
AWG, stranded
-
-
-
-
-
-
PAIGE ELECTRIC
10.11
Paige Electric
Wall Buster
The Paige Wall Buster is a revolutionary two-part through-wall
wiring protection device for PLTC wire.
Features and Benefits
• less expensive than current products
• saves on labor costs - snap fit takes seconds instead of minutes
or hours to install
• no need for large holes in the wall - 9/16 inch holes are all that
is required
• no sharp metal edges in contact with insulated conductors
• UL listed and designed specifically for LED channel letters
• UV resistant, fire and flame retardant, sunlight resistant
Wall Buster Construction
Locking Bushing
injection molded
1” hex base
.030 x .030 x 45 degree
weather seal ramp
standard 14 NPS
threads (1/2”)
double snap fit locks
Wall Feed Through Protection Tube
made from Black, flame retardant polymer material
.550” diameter x 18” long
one end is beveled and channeled
to lock into Bushing