SOLACTUATOR a product of BB Group is enhancing the clean energy use in field instrumentation. Hence providing solar powered Actuator as a solution to focus on the areas having automated valves in remote locations. Instead of laying a separate power cable to these areas a standalone solar power is introduced to power the actuators and reducing the manpower and extra work in cable laying. With the proven quality of Haselhofer Actuators and BB solar the innovation is brought to your steps. The technology is not only cost effective but also has a wide acceptance in the world. SOLACTUATOR An independent and clean solution in valve actuation This easy approach has been launched to replace the requirement of DG sets or batteries for powering these actuators. The operational cost for running these DG Sets has also been eliminated by entering to this practical and more long lasting power solution. The Panels can last over 25 years and are able to with stand the critical site conditions, approved for Oil and Gas application carrying all the required certifications to be operated in critical zones. Solar Power Pack Design Details: For 20 Minutes of Daily Operation for 157 Watt Actuator Solar PV Array Power consumption for 0.3 Hours Solar Charge Controller = 157 Watt x 0.33 Hours = 51.8 ≈ 52 Watt hours/ Day Taking 35% losses in to account the required power will be = 52/0.65 Watt hours/ Day = 80 Watt hours/ Day DC Actuator Daily Sun shine hour’s ≈ 5.5 Hours Power available from Solar Solar Panel =80 Watt hour/ Day/ 5.5 Hours a Day ≈ 14.5 Watt Per 5.5 Hours Fuse DC Load Module Size = 20 Watt PV Solar Power Pack Design Details: 1. Solar Module - The solar module consists of solar cells which convert the radiant energy of the sun directly to electricity. 2. Charge Controller - The charge controller incorporates the following functions: sophisticated battery charge control to ensure optimal utilization of the energy provided by the solar module plus overload and battery deep discharge protection. 3. Battery - Solar-Gel batteries are used. These are designed for a high number of discharge cycles and are both maintenance free and non-venting. They are capable of working within a wide range of ambient temperatures, have very low self-discharge rates and provide a long service life. 4. Actuator - Any model can be used with this scheme For any further business enquiry, please contact: Petrogulf WLL Doha, Qatar Ph: +974 4 4350151 Bhatia Brothers FZE Jebal Ali, Dubai, UAE Ph: +971 4 8132632 | Mob: +971 50 9685451 Technical Parts Est. Abu Dhabi, UAE Ph: +971 2 554 5875 – Ext 139 Web: www.pgulf.net I www.bhatia.com I technicalparts.com I Email: [email protected]