1. No category

Professional
Automotive
Host-based multiradio module series with Wi-Fi & Bluetooth
Highlights
• Dual-band Wi-Fi 2.4 GHz & 5 GHz
• Dual-mode Bluetooth v4.0 with Bluetooth low energy and
Classic Bluetooth (Bluetooth Smart Ready)
• Open source Linux driver
• RF parameters & MAC address stored in EEPROM
• Fully certified with the U.FL antenna connector
ODIN-W160:
15 x 22 x 3 mm
Product description
The host-based multiradio module series ODIN-W16 is ready-toembed for demanding industrial, vehicle, medical, and security
applications.
of customer end-devices, since the modules have pre-calibrated
radio parameters and MAC address stored in on-board EEPROM.
The module series is in a castellated package improving visual
inspection of end-devices. The modules vary in their implementation of antennas and connectors; for instance, ODIN-W160 has a
u.fl antenna connector for a wide selection of certified antennas.
The ODIN-W16 compact 15 x 22 x 3 mm modules support
dual-band IEEE 802.11 a, b, g, n on 2.4 GHz and 5GHz channels
36-165 (U-NII bands 1, 2, 2e, 3), as well as dual-mode Bluetooth
v4.0, which includes Bluetooth low energy and Classic Bluetooth
(Bluetooth “Smart Ready”).
The series provide modular radio type approvals for Europe, US
and Canada (R&TTE, FCC, IC), EMC certification, and Bluetooth qualification. Additionally, the modules support ad-hoc,
infrastructure and AP mode as well as security features WEP64,
WEP128, WPA, WPA2, and TKIP & AES hardware accelerator.
The host-based modules are designed for a long life cycle and
ultra-low power consumption. Together with the open-source
Linux host driver, the modules minimizes development time to
implement short range wireless communications in end-devices.
Also, no trimming or tuning is required during manufacturing
The operating temperature range is –40°C to +85°C.
Product selector
H = HCI
UBX-14005233 - R03
E = External antenna
iOS connectivity
Wi-Fi Security
RF parameters in EEPROM
MAC addresses in EEPROM
B
W
•
•
•
W/LE
Sec
•
•
B = Bluetooth
W = WLAN / Wi-Fi
Advance Information
Automotive
Android connectivity
•
Professional
Solder pads
•
Standard
Power supply: 3.0 - 3.6 V
Grade
SDIO
Features
UART
Max range
19 dBm 500 m
Interfaces Power Connectors
5 GHz channels 36-165
E
Max output power incl. antenna
Antenna type
WLAN IEEE 802.11 version
H a,b,g,n
Radio
2.4 GHz channels 1-13
ODIN-W160 v4.0
Bluetooth profiles
Standard Specs
Bluetooth qualification
Model
LE = Bluetooth Low Energy
Sec= WPA2, Enterprise, EAP-TLS
SHORT RANGE
ODIN-W16 series
Standard
Features
Standard
Professional
Automotive
Package
Wi-Fi IEEE 802.11
a, b, g, single-stream n (65 Mbps),
d, e, h, i, k, r, s
Dimensions
14.8 x 22.3 x 2.9 mm
Weight
1.5 g
2.4 GHz channels: 1-13
5 GHz channels: 36-165 (U-NII Band 1, 2, 2e, 3)
Mounting
Solder edge pads with castellations
(visually inspectable)
Bluetooth v2.1+EDR (Classic Bluetooth) up to HCI layer
v4.0 (Bluetooth low energy) up to HCI layer
Bluetooth EDR 2 Mbps and 3 Mbps rates
Range 500 m
Output power
19 dBm
Environmental data, quality & reliability
Operating temperature –40°C to +85°C
Software features
Certifications and approvals
RF parameters Available in on-board EEPROM
MAC addresses
Available in on-board EEPROM
Type approvals
SecurityWEP64/128
WPA-EAP-TLS, WPA-PSK
WPA2-EAP-TLS, WPA2-PSK
TKIP and AES hardware accelerator
Operational modes
Infrastructure (BSS)
Ad-hoc (IBSS)
Software AP (DFS channels excluded)
Driver support
Open-source Linux driver
Advanced power management
Europe (ETSI R&TTE)
US (FCC/CFR 47 part 15 unlicensed modular transmitter approval)
Canada (IC RSS)
Japan (MIC - formerly TELEC) in progress
R&TTE Directive 1999/5/EC
EN 300 328, EN 301 893
EMC: EN 301 489-1, EN 301 489-17,
EN 61000-6-2
Safety Compliance: IEC 60950-1,
EN 60950-1
Medical Electrical Equipment
EC 60601-1-2
High quality production according to IPC class standard
Internal support for Wi-Fi and Bluetooth co-existence
Android connectivity
Bluetooth Qualification v4.0 (controller subsystem)
iOS connectivity (Wi-Fi and Bluetooth low energy)
Electrical data
Support products
RF power supply
3.0 - 3.6 VDC
I/O power supply
1.75 - 1.9 VDC
Power consumption
TBD
EVK-W16
Evaluation kit for ODIN-W160
Interfaces
Ordering information
Wi-FiSDIO
ODIN-W160-20S
BluetoothUART
RF parameters:
I 2C
MAC addresses:
I2C
ODIN-W160 (U.FL connector for
external antenna)
U.FL antenna connector
Legal Notice
u-blox reserves all rights to this document and the information contained herein. Products, names, logos
and designs described herein may in whole or in part be subject to intellectual property rights. Reproduction, use, modification or disclosure to third parties of this document or any part thereof without the
express permission of u-blox is strictly prohibited.
Contact us
For contact information, see www.u-blox.com/contact-us.
The information contained herein is provided “as is”. No warranty of any kind, either express or implied, is
made in relation to the accuracy, reliability, fitness for a particular purpose or content of this document. This
document may be revised by u-blox at any time. For most recent documents, please visit www.u-blox.com.
Copyright © 2014, u-blox AG
UBX-14005233 - R03
Advance Information
www.u-blox.com