1. home and garden
2. home furnishings
3. lamps and lighting

WE ARE NOT JUST IN THE BUSINESS OF LIGHTING PRODUCTS...
WE ARE IN THE BUSINESS OF LIGHTING SOLUTIONS.
LOW GLARE PARABOLIC LOUVERS - ALUMINUM LOUVERS - BAFFLES - LENSES
RETROFIT KITS - WEATHERPROOF GASKETED ENCLOSURES
SLP LIGHTING
1400 S. OLD HIGHWAY 141
FENTON, MO 63026 USA
PHONE: 800.248.0224 / 636.600.4084
FAX: 636.600.4108
[email protected]
WWW.SLPLIGHTING.COM
Directory
Citadel Enclosures:
•
Citadel Common Components. . . . . . . . . . . . . . . . . 5
•
Citadel 2 Enclosure Components. . . . . . . . . . . . . . . 11
•
Citadel 2 LED Enclosure Components. . . . . . . . . . .25
•
Citadel 4 and 4i Components. . . . . . . . . . . . . . . . .33
Lighting Louvers:
•
Parabolic Louvers. . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
•
Decorative Louvers. . . . . . . . . . . . . . . . . . . . .. . . . . . .53
•
Eggcrate Louvers. . . . . . . . . . . . . . . . . . . . . . . . . . . .54
•
Aluminum Louvers. . . . . . . . . . . . . . . . . . . . . . . . . . . .56
•
Aluminum Knock Down Hardware . . . . . . . . . . . . . .58
•
Aluminum Baffles. . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
•
Retrofit Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Lenses & More:
2
•
Flat Sheet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
•
Prismatic Lenses. . . . . . . . . . . . . . .. . . . . . . . . . . . . . .65
•
Wraparound Lenses. . . . . . . . . . .. . . . . . . . . . . . . . . .66
•
Drop Lenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
•
Globes and Acorns. . . . . . . . . .. . . . . . . . . . . . . . . . . .67
•
Safety Tube Guards. . . . . . . . . . . . . . . . . . . . . . . . . . . 68
•
T5-HO Tube Guards. . . . . . . . . . . . . . . . . . . . . . . . . . .68
•
Citadel 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
CITADEL
ENCLOSURES
CITADEL
TM
4
•
Citadel Common Components. . . . . . . . . . . . . . . . . . . . 5
• End Plugs . . . . . . . . . . . . . . . . 6
• Citadel Screws. . . . . . . . . . . . . 7
• Citadel Tethers. . . . . . . . . . . . . 8
•
Citadel 2 Enclosure Components. . . . . . . . . . . . . . . . . 11
• Housing. . . . . . . . . . . . . 13
• Lenses. . . . . . . . . . . . . 14
• Geartray Hardware. . . . . . . . . . . . . 16
• Geartrays. . . . . . . . . . . . . 17
• Reflectors. . . . . . . . . . . . . 18
• Latches. . . . . . . . . . . . . 20
• Mounting. . . . . . . . . . . . . 22
• Certifications. . . . . . . . . . . . . 23
•
Citadel 2 LED Enclosure Components. . . . . . . . . . . . . 25
• CT2 LED Style 1 - Flat Board Tray System. . . . . . . . . . . . . 26
• CT2 LED Style 2 - Extruded Board Tray System. . . . . . . . . . . . . 30
•
Citadel 4 and 4i Components . . . . . . . . . . . . . . . . . . . .33
• Housings. . . . . . . . . . . . . 34
• Lenses. . . . . . . . . . . . . 36
• Geartray Hardware. . . . . . . . . . . . . 37
• Geartrays. . . . . . . . . . . . . 38
• Boardtrays. . . . . . . . . . . . . 39
• Citadel 4 Latches. . . . . . . . . . . . . 40
• Citadel 4 Mounting Hardware. . . . . . . . . . . . . 40
• Citadel 4i Latches. . . . . . . . . . . . . 41
• Citadel 4i Mounting Hardware. . . . . . . . . . . . . 41
• Reflectors. . . . . . . . . . . . . 42
• Mounting. . . . . . . . . . . . . 43
• Citadel 4i Additional Mounting Options . . . . . .44
• Certifications. . . . . . . . . . . . . 45
CITADEL ENCLOSURES
COMMON COMPONENTS
CITADEL 2
TM
CT4i24
CITADEL24 CITADEL
CITADEL
CITADEL
TM
TM
TM
Citadel End Plugs
• Black Polymeric Endplug ensures a superior
• Listed in UL file E215168
• Easy Installation
• Two Included in Latch Bags
• Same Endplug for all Citadel Housings
• CT-ENDPLUG-B
•
seal
Simply place and push into housing
LED Board
Retention Clips
Board Retention Clip
• For Citadel 2 and 4/4i Board Tray Style 1
• Pop In Place To Hold LED Boards
• Scratch Proof, Conductivity Inhibitor Coating
• Works for .060” To .084” Board Thickness
• No Screws or Tape Needed
• CT-BRC-SM
6
Citadel Screws
CT-SCRW
Used for Installation of Retainer Clips and Lens Tethers on
Citadel 2 and Citadel 4 Products
- #2 Combo: Phillips And Flat Head
- 5/16” Hex Head
- Installs With Nut Driver, Phillips Or Flat Screwdriver
- Max Torque : 35 in-lbs
CT-LED-SCRW-850
Used for Installation of Endcaps onto the Citadel 2 LED
Style 2 Boardtray
- #2 Phillips Button Head
CT-SCRW-UGT
Used for Ballast Attachment to the Citadel 4 and 4i
Universal Geartrays, Mounts Drivers to the Drivertray
on the Citadel 2 LED
- #10-16 X 7/16” Type B Thread Forming
Vibration Resistant Hex Washer Head
With #2 Combo Phillips-slot Drive
7
Citadel Tethers
Stainless steel cables secure lens or geartray to the
housing during maintenance to prevent from falling.
•
•
•
CT-LT8
CT-LT12
8
8” or 12” depending on Application
Geartray Tether
Lens Tether with Push Retainers
CITADEL 2 CITADEL 2 CITADEL 2
TM
TM
TM
Citadel 2 Lens Tether:
• Citadel 2 LIRA Lens
• 12” Stainless Steel Cable (2)
• Push Retainer (2)
Push Retainer
CITADEL 4
TM
CT4i
CITADEL 4
TM
CITADEL 4
TM
Citadel 4/4i Lens Tether:
• 8” Stainless Steel Cable (2)
• Push Retainers (2)
CITADEL 4
TM
CT4i
CITADEL 4
TM
CITADEL 4
TM
Citadel 4/4i Geartray Tether:
• Citadel 4 Geartray
• 12” Stainless Steel Cable
9
SLP LIGHTING
1400 S. OLD HIGHWAY 141
FENTON, MO 63026 USA
PHONE: 800.248.0224 / 636.600.4084
FAX: 636.600.4108
[email protected]
WWW.SLPLIGHTING.COM
10
CITADEL 2™ WEATHERPROOF ENCLOSURES
FOOLPROOF INSTALLATION - LIGHT WEIGHT - TWO WIDTHS / THREE LENGTHS
DIFFUSERS RESIST BREAKAGE - DEEP OPTICAL LENS - GUARDIAN SEAL
CITADEL 2 C
TM
Designed With Tough Environments In Mind
• Parking Garages
• Pedestrian Tunnels
• Food Processing Facilities
• Marinas and Offshore
• Exterior Retail Areas
• Breweries and Bottling Facilities
• Refrigerated Storage
• Livestock Containment
12
Housing
CITADEL 2 CITADEL 2 CITADEL 2
TM
TM
TM
Entry Holes:
• For: 1/2” NPT / M20 fittings
• One or Both Ends
•
UL 5VA Fiberglass Housing
(Will not melt or burn)
•
UL Approved as a Wireway and
Through Wiring
•
Weatherability(f1) Rated
Suitable for outdoor use with respect to exposure to Ultraviolet Light, Water
Exposure and Immersion in accordance with UL 746
• CT2-HV5-1L4, CT2-HV5-2L2, CT2-HV5-2L4, CT2-HV5-2L8
13
CITADEL 2
TM
Lineal Ribbed
CITADEL 2 CITADEL 2
Diffusers
TM
TM
The lineal ribbed diffuser offers a clean new look and eliminates the problems
associated with the traditional style enclosures.
•
•
•
•
•
•
UV Stabilized Polycarbonate
100% Impact Modified Acrylic
Narrow (1Light) and Wide (2Light)
2’, 4’ and 8’ Lengths
Clear
FR50™ Frosted
TM
SLP FROSTED SERIES
Dimensions
Lineal Ribbed Diffuser
Narrow
(1Light)
Wide
(2 Light)
2’, 4’ and 8’ Lengths
14
Nominal
Length
Width
Length
Depth
4’
3.62”
51.26”
1.86”
2’
6.38”
27.24”
1.92”
4’
6.40”
51.37”
2.13”
8’
6.40”
99.50”
2.13”
Deep Optical Lenses
The Deep Optical Lens is injection molded for clarity and strength. The 3 ½” Deep
Lens is designed specifically for use with reflectors.
•
•
•
•
•
100% Impact Modified Acrylic
Wide (2Light)
2’, 4’ and 8’ Lengths
Optically Clear
FR50™ Frosted
TM
SLP FROSTED SERIES
Dimensions
Deep Optical Lens
Wide
(2 Light)
Nominal
Length
Width
Length
Depth
2’
6.40”
27.24”
3.50”
4’
6.40”
51.37”
3.50”
8’
6.40”
99.50”
3.50”
2’, 4’ and 8’ Lengths
TM
SLP FROSTED SERIES
FR50™ Frosted—highly efficient diffusers dramatically reduces
direct glare, improves LED visual performance with a smooth
distribution and Light Transmission of 88%
15
CITADEL 2
TM
Geartray
CITADEL 2 CITADEL 2
Hardware
TM
TM
Retainer Clips:
• 316 Stainless Steel
• Installed with Hooks for geartray suspension during maintenance
• Strap Clip
• CT-RC
Pin Hole for Alignment
Screw Hole
Support
Strap Clip
Geartray Hook
Support Straps:
Connects geartray to the housing helping to
prevent geartray from falling during maintenance.
• Clear Straps Enhanced
• Flexible for good fit
• CT-SST
16
UV protection in Resin
Geartrays
CITADEL 2 CITADEL 2 CITADEL 2
TM
TM
TM
Avoid the extra expense and weight of a strip fixture.
The Citadel 2™ Geartrays will efficiently carry the electrical gear.
•
•
•
•
•
Pre-painted Cold Rolled Steel
Minimum 87% Total Reflectance
UL rated
T5, T8, T8HO and Universal
1-Light, 2-Light and 3-Light
1-Light
T5
Universal
2-Light
T8
Universal
T8HO
T5
T8
17
Two Reflector Designs: Basic & Wide Distribution
Both with Enhanced Specular Finish
- Minimum 92% Reflectivity
Single Length works for both T5 and T8 lamps
Basic Reflector:
• 44.5” Long
• Compatible with Lineal Ribbed Diffuser and
Deep Optical Lens
• Installs with #10 screws
•
CT2-RF-2L4-B
Citadel 2 Housing
Geartray
Basic Reflector
Lineal Ribbed
Diffuser
or
Deep Optical
Lens
170
150
14
0
0
0
13
14
1.2
1.2
1.2
77.1%
1.2
1.4
1.4
63.5%
1.2
1.4
1.3
70.2%
120
T5HO-C
110
100
90
80
80
70
70
60
60
50
(Rated Lumens)
50
1.2
1.4
1.4
64.5%
T5HO
90
1.2
1.5
1.5
56.6%
T8
100
1.2
1.3
1.3
69.8%
IES Spacing
Criteria:
End
Diagonal
Cross
% Lamp
0-180
110
T5HO T5HO-C
120
T8
Blue: T8 (30mm lamp holder)
Green: T5HO (19mm lamp holder)
Red: T5HO-C (19mm lamp holder)
18
LIRA
13
0
- C = amalgam lamp
(Rated Lumens)
160
Basic Reflector with LIRA Lens
150
Basic Reflector with DIRA Lens
IES Spacing
Criteria:
End
Diagonal
Cross
% Lamp
0-180
160
DIRA
180
Photometrics:
170
Quantity Required Per Enclosure
2 Foot
4 Foot
8 Foot
1
1
2
40
40
30
30
20
20
10
0
10
Wide Reflector:
• 44.5” Long
• Compatible with Deep Optical Lens
• Installs with #10 screws
•
CT2-RF-2L4-W
Citadel 2 Housing
Geartray
Wide Distribution
Reflector
Quantity Required Per Enclosure
2 Foot
4 Foot
8 Foot
2
2
4
Deep Optical
Lens
* Reflector is a 2 piece assembly.
180
170
160
160
150
150
Wide Reflector with LIRA (deep) Lens
170
Photometrics:
30
30
LIRA
14
0
14
0
0
120
120
0
13
13
- C = amalgam lamp
End
1.2
1.2
1.2
Diagonal
1.2
1.6
1.3
Cross
1.2
2.0
1.9
% Lamp
0-180
70.3%
60.6%
68.0%
110
T5HO-C
100
T5HO
50
(Rated Lumens)
50
60
60
70
70
80
80
90
90
100
T8
110
IES Spacing
Criteria:
Blue: T8 (30mm lamp holder)
Green: T5HO (19mm lamp holder)
Red: T5HO-C (19mm lamp holder)
40
40
20
20
10
0
10
*ALL Photometric data varies depending on the height (measurement from the center of the lamp) of the lamp holder.
19
Latches
CITADEL 2 CITADEL 2 CITADEL 2
TM
TM
TM
Latch Features:
• Latches lock open during maintenance
• Quick and Easy Installation
• Unique SLP Lighting Design: Captive Keeper secures latch to housing,
preventing accidental loss of latch
• Easily made Tamper Resistant with #6, 1/2” Minimum, 3/4” Maximum length
316 Stainless Steel
- Withstands demanding environments
- Bag Quantities and Bulk Available
- CT2-LATCHSS
20
Secure Locking Plastic
- Patented
- White POM
- Clear Polycarbonate
- Bag Quantities and Bulk Available
- CT2-LATCHW or CT2-LATCHCC
Clear Polycarbonate
- Original Citadel 2 Latch
- CT2-LATCHC
21
Mounting
CITADEL 2 CITADEL 2 CITADEL 2
TM
TM
TM
Simple Mounting System
• Reduces installation labor costs
• No holes drilled through the housing
• Variable mounting centers
• U.L. rated
Mounting Brackets
• CT2-MB-2L Wide (2-light)
• CT2-MB-1L Narrow (1-light)
• Snaps onto housing at multiple places
Options
• Direct Mount to Ceiling or beam
• Pendant Mount
• Chain Hang or Cable Mount with or
without Optional Bail
Pendant Mount
Punched mounting
bracket available
for special order
Designed for 3/8”
threaded rod
CT2-MB-2L-MCH
• Mounting Bracket screws into the beam
• Housing snaps into the bracket
22
Bail (Optional)
Bail provides
simple means
of suspending
the fixture with
a chain or
cable.
CT-BAIL
Certifications
CITADEL 2 CITADEL 2 CITADEL 2
TM
UL
NSF
NEMA4X
TM
TM
Patented
UL Listing: File E319249
UL Recognized Components: File E215168
Components Tested and Certified
by NSF International
IP65
IP66
Citadel
Guardian
IP67
seal
RoHS
PSI 1500
SLP Guardian Seal
™
Offers 34% more contact between the lens and the gasket.
Guardian Seal™ is a unique combination
of our Injection Molded lens features and
high performance “poured in place”
gasket. This provides the most advanced
sealing system available.
23
SLP LIGHTING
1400 S. OLD HIGHWAY 141
FENTON, MO 63026 USA
PHONE: 800.248.0224 / 636.600.4084
FAX: 636.600.4108
[email protected]
WWW.SLPLIGHTING.COM
24
CITADEL 2™ LED COMPONENTS
Style 1 Flat Board Tray System
and Style 2 Extruded Board Tray System
Components for Integration of LED Systems
CITADEL 2
TM
• DESIGNED FOR EASY TO ASSEMBLE LED SYSTEMS
• EASE OF INSTALLATION AND MAINTENANCE
• VISUALLY FAMILIAR LIGHT SOURCING
• MULTIPLE LIGHTING SOLUTIONS
• DesignLights Consortium® QUALIFIED LISTED PRODUCT
Patent Pending
On Specified Configurations
Visit www.designlights.org/qpl for Details
LED Style 1
CITADEL 2 CITADEL 2 CITADEL 2
TM
TM
TM
Driver Tray
•
26
Driver Tray attached to Board Tray using the Citadel Universal Geartray Screw
•
L Shape for One Driver
•
U Shape for Two Drivers
• CT-LED-DT-L
• CT-LED-DT-U
CITADEL 2
TM
Board Tray
CITADEL
2 CITADEL 2
Hardware
TM
TM
New Wide Retainer Clips
• For Board Trays with Single Center row of LEDs
• CT-RC-WIDE
Traditional CT2 Retainer Clips
• For Board Trays with Two rows of LEDs
• CT-RC
Retainer Clips Easily Installed with CT-SCRW
Board Retention Clips
• See Citadel Enclosures
Common Components
• CT-LED-BRC-SM
27
CITADEL 2
TM
LED
1
CITADEL 2Style
CITADEL 2
TM
TM
Two Row Board Trays
•
Flat Board Tray Designed For LED
Board Placement
•
Board Tray for Two Rows of LED
•
Boards at Typical Board Widths
• 0.95", 1.60" & 1.90"
•
2’, 4’, and 8’ Lengths Available
0.95”
1.60”
1.90”
Board Tray Features
•
28
Lance keeps boards
from slipping out of
place
•
Board Retention Clips hold
boards in position.
- NO TAPE OR SCREWS
Single Center Row
Board Trays
Wide Center Row of LEDs with Clips
•
Wide Board Tray for Single Row of LEDs
•
Wide Retainer Clip holds Board Tray in Place
•
Lances and Board Retention Clips hold
Boards in Place
•
No Tape or Screws Needed
•
For Typical Board Widths 0.95” or 1.60”
•
2’, 4’, and 8’ Lengths Available
1.60”
0.95”
Narrow Single Center Row Board Tray forCenter Row of LEDs
•
Wide Retainer Clip holds Board Tray in Place
•
For Typical Board Widths 1.60” or Less
•
Tape or screws required for single center row of boards
• CT2-LED-BT1-1L4-1R
29
CITADEL 2 LED
CITADEL 2Style
CITADEL 2
2
Driver Tray
TM
•
•
•
TM
TM
White Precoat Cold Rolled Steel
2’ and 4’ lengths
Attaches to Board Tray Retainer Clip with
CT-SCRW
Keeps the driver separate from LED boards
•
• CT2-LED-DT2 OR CT2-LED-DT4
Board Tray
• Extruded Aluminum
• 2’ and 4’ lengths
• Simply snaps into Board Tray Retainer Clip
• Hinge feature for easy fixture maintenance
• Nominal 1.58” width x .065” thickness
• CT2-LED-BT2-22-M OR CT2-LED-BT24-M
End Caps
• End Caps easily attached to Board Tray
• Minimizes shifting
• Keeps the Board Tray centered
• CT2-LED-EC-M
30
Hardware
Board Tray Retainer Clips:
• Aluminum
• Installs onto the Citadel 2 fiberglass
housing screw hole and alignment pin
using SLP CT-SCRW
• Holds Driver Tray and Optional Lens
Tether
• CT2-LED-BTRC-2
Wire Access Cover
• Protects cord entry to the housing
• CT2-LED-2L2-WAC OR CT2-LED-2L4-WAC
Board Retention Clips
• Citadel 2 Board Tray Style 2
• Snaps into the top of the
board tray to hold LED
boards in place
• CT2-LED-BRC-M
31
DLC Reflector
•
•
Citadel 2 LED Style 2
2 Clips That Snap Into Board Tray Ends And Hold Reflector
•
•
Reflector spreads the LEDs distribution more evenly
Citadel 2 LED components plus the Reflector Kit meet DLC V2.0 requirements
for Parking Garage Applications
Patent Pending
• CT2-LED-BT2M-RFC
•
• CT2-LED-RF-2L2-M OR CT2-LED-RF-2L4-M
Reflector Clip
LED Reflector
On Specified Configurations
Visit www.designlights.org/qpl for Details
SLP LIGHTING
1400 S. OLD HIGHWAY 141
FENTON, MO 63026 USA
PHONE: 800.248.0224 / 636.600.4084
FAX: 636.600.4108
[email protected]
WWW.SLPLIGHTING.COM
32
CITADEL 4/4i™ GASKETED ENCLOSURES
VERY DURABLE - EASY TO CLEAN AND SERVICE - STAINLESS HARDWARE - IMPACT RESISTANT LENSES
CITADEL 4
TM
CIT
CT4i
• Gymnasiums
• Refrigerated Storage
• Exterior Retail
• Parking Garages
• Beverage & Bottling Facilities
• Manufacturing
• Food Processing Facilities
• Construction Sites
• Freezers
• Livestock Containment
Protects Lighting in Demanding Environments
Housings
•
•
•
UL 5VA Fiberglass Housing (Will not melt or burn)
UL Approved as a Wireway and Through Wiring
Weatherability(f1) Rated
- Suitable for outdoor use with respect to exposure to Ultraviolet Light, Water
Exposure and Immersion in accordance with UL 746
Entry Holes:
• For: 1/2” NPT / M20 fittings
• One or Both Ends
CITADEL 4
TM
CITADEL 4
TM
CITADEL 4
TM
Wash Down Design : CT4-HV5-2H
Citadel 4 has been carefully designed to minimize horizontal surfaces and latch
pockets that are prone to retaining debris.
CT4i
Robust Design : CT4I-HV5
Citadel 4i housing is designed to be a more highly adaptable and robust
housing with Advanced Mounting options
34
Heat Management
Available with Heat Management System for LED Applications: (Patent Pending)
• Factory Installed Ballast Attachment Rail (Patent Pending)
• Allows for Easy Ballast Mounting
• Up to 13˚C cooler (Actual Results may vary based on Lamp/Ballast configuration)
CITADEL 4
TM
CITADEL 4
TM
CITADEL 4
TM
CT4-HV5-2H-BR
CT4i
CT4I-HV5-BR
Ballast Attachment Hardware
• Ballast Attachment Bolt: CT4I-BAB
• Flanged Nut: CT4I-BAFN
• Ground Wire: CT4I-GND-15
35
Lenses
CITADEL 4
CITADEL 4
TM
•
•
•
TM
CITADEL 4
TM
CT4i
100% Impact Resistant Acrylic
- Longevity
UV Stabilized Polycarbonate
- Extreme Heat or Cold
- Maximum Impact Resistance
Compatible with reflectors up to
2.5”/63mm deep
The Optically Clear Lens maximizes efficiency and minimizes distortion. The
sides have precise lineal prisms and the ends are lightly frosted to reduce
direct glare.
• Light Transmission of 91%
TM
SLP FROSTED SERIES
FR50™ Frosted—highly efficient diffusers dramatically reduces
direct glare, improves LED visual performance with a smooth
distribution and Light Transmission of 88%
Quality
• Stacking Ribs
- Helps prevent damage when
lenses are stacked
36
•
Protective Film protects lens from
scratching during shipping and
installation
- Blue: Polycarbonate
- Clear: Acrylic
CITADEL 4
TM
Geartray
Hardware
CITADEL 4
CT4i
CITADEL 4
TM
TM
Geartray Retainer Clips
• Contain the geartray inside
the housing
• Stainless Steel
• 4 per housing
• Installed with CT-SCRW
• CT4-GTRC
B
B
B
C
B
B
C
C
B
Hardware
CITADEL 4
CITADEL 4
Placement:
B
B
A
B
C
B
A
CITADEL 4
TM
B
A
TM
C
A
TM
B
B
B
B
A
B
B
C
B
B
B
C
C
A
B
A
B
B
B
HARDWARE
B
HARDWARE
C
B
C
A Geartray Retainer Clip
CT4-GTRC (X4)
B
B
A
A
A
H
B
Geartray Retainer Clip
CT4-GTRCC (X4)
Stainless
Steel Latch
B
CT4-LATCHSS (X12)
Hanger Bracket
C CT4-MB-VH or CT4--MB-C
Stainless
(X4)Steel Latch
CT4-LATCHSS (X12)
A
B
B
Hanger Bracket
CT4-MB-VH or CT4--MB-C
(X4)
Name.
Check.
Control.
Name.
Material.
A
M.Bush
CITADEL 4
Hardware Loc
Check.
Material.
031808
RetainerCITADEL
Clip
4
SLP(X4)
Lighting
CT4-GTRC
Hardware Location
Control.
Geartray
M.Bush
031808
1400 South Old Highway 141
Fenton, Missouri USA 63026
SLP
C Lighting
All information is given to our best knowledge and without obligation. We reserv
Stain
CT4-
1400 South Old Highway 141
Fenton, Missouri USA 63026
Hanger Bracket
CT4-MB-VH or CT4--MB-C
All information is given to our best knowledge and without obligation. We reserve the righ
B
C
B
B
C
B
HARDWARE
A
Geartray Retainer Clip
CT4-GTRC (X4)
B
Material.
C
Hanger Bracket
Stainless Steel Latch
CT4-LATCHSS (X12)
Name.
M.Bush
Hardware Locations
Check.
Control.
CITADEL 4
031808
SLP Lighting
Remark.
37
(X4)
CITADEL 4
TM
Geartrays
CITADEL 4
TM
CITADEL 4
TM
CT4i
Fluorescent
•
•
•
•
Pre-painted Cold Rolled Steel
Minimum 87% Total Reflectance
Supported by 4 Stainless Steel spring
fittings
Configurations:
- 4 or 6 lamp UNIVERSAL
- 3, 4, 5 or 6 lamp T5
- 3, 4, 5 or 6 lamp T8
6-Light
4-Light
38
Universal
Universal
T5
T5
T8
T8
CITADEL 4
TM
Board Trays CT4i
CITADEL 4
TM
CITADEL 4
TM
LED
Integrate LED’s into the Citadel 4 or 4i Enclosure using the Citadel Board tray in
place of the geartray.
•
•
•
•
Pre-painted Cold Rolled Steel
Supported by 4 Stainless Steel
Retainer Clips (same as the Citadel
4/4i Geartray)
Configurations:
- 4 Rows of Typical Board Sizes
0.95”, 1.60” 1.90”
Board Tray Rentention Clips snap
boards in place
Heat Management
BR Option
Requried For LED
Factory Installed
CT4 Flat Board Tray
CT4LED-BT1-4R (095,160,190)
LED Drivers
Driver Tray Option
Supplied by Others
Additional
CT-LED-DT-U
Board Retention Clip
CT-LED-BRC-SM
Required if using
3 or more drivers
U-Shape Driver Tray Option when
using more then 3 drivers forLED
the
Boards
Supplied By Others
enclosure. CT-LED-DT-U
39
CITADEL 4
TM
Latches
CITADEL 4
CITADEL 4
TM
TM
•
Stainless steel latches provide durability and chemical
resistance
•
Captive design. Will not fly off during maintenance
•
12 latches per unit assure positive lens retention
•
Easily made tamper resistant
- #6 - 3/8” Minimum 1/2” Maximum
• CT4-LATCHSS
1
2
Intallation:
1. Slide the dove tails into the housing pocket
2. Pop the latch keeper around the housing
3. Push the latch closed
13
3
2
Name.
M.Bush
Check.
Control.
061208
Remark.
Material. SS 301
CITADEL 4 LATCH INSTALLATION
Stainless Steel Latch
CT4-LATCHSS
SLP Lighting
1400 South Old Highway 141
Fenton, Missouri USA 63026
All information is given to our best knowledge and without obligation. We reserve the right to make changes to materials or design.
Mounting Bracket
Universal Mounting Bracket : CT4-MB
• No holes need to be drilled through the housing
• Stainless Steel Universal Mounting Bracket
works with multiple systems:
- Ceiling Mount
- V-Hook
- Cable
40
CT4i Latches
•
Latch Pockets Blend with the edge of the
housing for a consistently smooth edge all the
way around
• 316 Stainless Steel Latches CT4I-LATCHSS
• Secure Locking Plastic Latches CT4I-LATCHW
- Acetal Copolymer (Similar to Celcon® & Delrin®)
• 12 latches per unit assure positive lens retention
2.
1.
2.
1. Captive Keepter, latch will not fly off during
maintenance
2. Holes for Optional Tamper Resistance
3. Secure Locking Plastic Latch stays open for
easy maintenance
3.
1.
(Patent Pending)
Mounting Strap
•
Mounting Straps Available in 316 Stainless
Steel or Zinc Plated High Strength Steel
• CT4I-MS-SS OR CT4I-MS-ZP
•
CT4i has optional mounting systems:
- Mounting Strap:
• V-Hook
• Flexible Ceiling Mount
• Cable (Provided By Others)
• Chain (Provided By Others)
- Mounting Strap with Rigid Mounting Beam:
• Rigid Ceiling Mount
• Dual Pendant Mount (Provided By Others)
41
CITADEL 4
TM
Available for 4 or 6 light
Enhanced Specular Finish
Minimum 92% Reflectivity
Single length is compatible with
both T5 and T8 lamps
170
160
Amount Needed for Enclosure
4 Light
6 Light
2
3
160
50
1
50
1
0
13
05
50
06
110.00°
60
07
6.50in
70
08
80
09
90
001
100
011
CT4-RF-4L-U
110
1
12
02
0
1
Length
45”
03
Product
Citadel 4 Universal Reflector
0
14
0
•
Fluorescent
14
•
TM
180
•
CT4i
CITADEL 4
TM
170
•
Reflectors
CITADEL 4
04
3.00in
40
03
30
02
20
180
0
10
170
017
10
160
160
0
15
40
1
0
14
0
13
03
1
Blue: T5HO No Reflector
1
Red: T5HO With Reflector
07
70
08
110.00°
80
09
140.00°
90
001
3.00in
100
4.50 in
110
(19mm lamp holder)
011
110.00°
12
02
0
(19mm lamp holder)
2.00
in
6.50in
CT4-RF-6L-U
1
110.00°
50
140.00°
05
50
06
4.50 in
60
2.00 in
04
40
03
30
02
20
01
42
0
10
CITADEL 4
TM
CITADEL 4
TM
CT4i
CITADEL 4
TM
Mounting Options
CT4-VHOOK:
Stainless Steel V-hook.
UL rated for 4X fixture weight.
Maximum fixture weight of 23lbs.
CITADEL 4
TM
CITADEL 4
TM
CT4i
CITADEL 4
TM
Cable Mount
Supplied by Others
Flexible Ceiling Mount:
Stainless Steel Ceiling Mount
attaches directly to the ceiling.
CT4-CM1.25
1.25” Between Ceiling and Enclosure
43
CT4i Mounting
Rigid Mounting Beam
• Patented
• 316 Stainless Steel or
Zinc Plated HSLA
• CT4I-MB-SS OR CT4I-MB-ZP
Only Available for CT4i
B
B
B
C
Hardware
CT4i Placement:
C
B
B
C
C
B
B
B
B
B
C
B
B
A
A
A
A
B
A
B
B
B
A
A
A
B
B
C
C
A
A
A
B
B
B
B
HARDWARE
HARDWARE
B
C
B
C
A
HARDWARE
Geartray Retainer Clip
CT4-GTRC
Geartray
Retainer (X4)
Clip
CT4-GTRC (X4)
B
C
B
A
B
Material.
B
Remark.
Remark.
M.Bush RetainerMaterial.
Geartray
ClipCITADEL 4
C
Stainless Steel Latch
Hardware
Locations
4
Name. M.Bush
Check.
CT4-GTRC (X4)CITADEL
B
CT4-LATCHSS
C
Stainless
Steel Latch (X12)
Hardware Locations
Check. Control. 031808
CT4-LATCHSS (X12)
Hanger Bracket
Control. 031808
SLP Lighting
CT4-MB-VH
C 1400 South Old Highway 141 Stainless Steel Latch
Hanger
Bracket or CT4--MB-C (X4)
SLP Fenton,
Lighting
Missouri USA 63026 CT4-LATCHSS (X12)
CT4-MB-VH or CT4--MB-C (X4)
1400 South Old Highway 141
Name.
Nam
Che
Con
Fenton,
Missouri
USA
63026
All information is given to ourHanger
best
knowledge
and
without
obligation. We reserve the right to make changes to m
Bracket
CT4-MB-VH
orobligation.
CT4--MB-C
(X4)
All information is given to our best knowledge
and without
We reserve the
right to make changes to materials o
All information is given to
Optional Spacing
44
CITADEL 4
TM
Certifications
CITADEL 4
TM
CITADEL 4
TM
CT4i
Patented
UL
NSF
NEMA4X
IP66
Citadel
Guardian
IP67
seal
RoHS
PSI 1500
SLP Guardian Seal
UL Listing: File E319249
UL Recognized Components: File E215168
Components Tested and Certified
by NSF International
™
Offers 34% more contact between the lens and the gasket.
Guardian Seal™ is a unique combination
of our Injection Molded lens features and
high performance “poured in place”
gasket. This provides the most advanced
sealing system available.
CT4i IP65
HEAT
Testing
On Specified Configurations
Visit www.designlights.org/qpl for Details
The Citadel 4 and Citadel 4i have been subjected to various testing to assure
a superior product. Even though the material will withstand a wide temperature
range, it is incumbent on others to verify that the lamp/ballast combination is
appropriate for the ambient temperature of the application.
45
SLP LIGHTING
1400 S. OLD HIGHWAY 141
FENTON, MO 63026 USA
PHONE: 800.248.0224 / 636.600.4084
FAX: 636.600.4108
[email protected]
WWW.SLPLIGHTING.COM
46
WE ARE NOT JUST IN THE BUSINESS OF LIGHTING PRODUCTS...
WE ARE IN THE BUSINESS OF LIGHTING SOLUTIONS.
LOW GLARE PARABOLIC LOUVERS - ALUMINUM LOUVERS - BAFFLES - LENSES
RETROFIT KITS - WEATHERPROOF GASKETED ENCLOSURES
SLP LIGHTING
1400 S. OLD HIGHWAY 141
FENTON, MO 63026 USA
PHONE: 800.248.0224 / 636.600.4084
FAX: 636.600.4108
[email protected]
WWW.SLPLIGHTING.COM
Directory
Lighting Louvers:
•
Parabolic Louvers. . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
•
Decorative Louvers. . . . . . . . . . . . . . . . . . . . .. . . . . . .53
•
Eggcrate Louvers. . . . . . . . . . . . . . . . . . . . . . . . . . . .54
•
Aluminum Louvers. . . . . . . . . . . . . . . . . . . . . . . . . . . .56
•
Aluminum Knock Down Hardware . . . . . . . . . . . . . .58
•
Aluminum Baffles. . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
•
Retrofit Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Lenses & More:
48
•
Flat Sheet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
•
Prismatic Lenses. . . . . . . . . . . . . . .. . . . . . . . . . . . . . .65
•
Wraparound Lenses. . . . . . . . . . .. . . . . . . . . . . . . . . .66
•
Drop Lenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
•
Globes and Acorns. . . . . . . . . .. . . . . . . . . . . . . . . . . .67
•
Safety Tube Guards. . . . . . . . . . . . . . . . . . . . . . . . . . . 68
•
T5-HO Tube Guards. . . . . . . . . . . . . . . . . . . . . . . . . . .68
•
Citadel 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
LIGHTING LOUVERS
PARABOLIC LOUVERS - DECORATIVE LOUVERS - EGGCRATE LOUVERS
ALUMINUM EGGCRATE - ALUMINUM LOUVERS
Products for a Today’s Office and Retail Environment
Parabolic Louvers
Parabolic Louvers are a square configuration of cells with parabolic (curved)
cell walls. Their function is to direct light downward in a controlled manner
and eliminate the view of the light source.
All SLP Parabolic Louvers are available:
(Style 1) for Lay-in-Grid or T-Bar Systems
(Style 4) for Lighting Doorframe Fixtures
Style 1
50
Style 4
.625ì
16mm
.400”, 10
.400”
.625ì10,2mm
.400”,
10,2mm
16mm
Parasquare 1:
Nominal 1/2” x 1/2” x 1/2”
.625”
.625ì
16mm
16mm
.625ì
16mm
.400”, 10,2mm
.625ì
16mm
Parasquare 2:
1-1/2” x 1-1/2” x 1”
1.00”
25,4mm
.625ì 10,2mm
.400”,
16mm
.625ì
16mm
1.50”
38,1mm
.400”, 10,2mm
.625ì
16mm
Parasquare 3:
3/4” x 3/4” x 1/2”
.48”
12,2mm
.48”
12,2m
.75”
.48”19mm
12,2mm
.75”
.75”
19mm
19mm
.75”
.48” 19mm
12,2mm
.75”
19mm
1.50”
38,1mm
Parasquare 4:
3” X 3” X 1-1/2”
3”
76,2mm
Parasquare 5:
3/4” x 3/4” x 3/8”
.35”
9mm
.75”
19mm
51
Louver Features
Materials:
• Styrene
• Acrylic
Standard Sizes:
• 2x4
• 2x2
• 1x4
• Special Fabrication
•
•
•
•
•
Standard Finishes:
• Specular Silver
• Permalux
• Aluma-Lux (Semi-Specular)
• Black
• White
• Specular Gold
Look Of Aluminum At The Price Of Plastic
Doesn’t Show Fingerprints
No Cave Effect
Will Not Bend Or Dent
Available On Any Slp Plastic Louver Or Eggcrate.
The Forgiving Finish
•
•
•
52
A Premium Finish For Outstanding Lighting Installations.
Allows Contaminants Such As Fingerprints Or Dust To Be Wiped Away.
Available On Any SLP Plastic Louver Or Eggcrate.
Decorative Louvers
Decorona™ 33 and 50 offer the original “circle within a
square motif” that has been copied but never equaled.
Parahex
P6’s® hexagonal cells offer equally high degrees of brightness
control in the parallel, perpendicular and diagonal zones.
53
Eggcrate Louvers
Eggcrate is a square configuration of cells. The cell walls that are flat. The
function of eggcrate is to block any view of the space above while creating a
bright area of light.
T Series:
1/2” x 1/2” x 1/2”
Styrene - White
Acrylic - White
1x4, 2x2, 2x4
.50”
12,7mm
.50”
12,7mm
54
TC Economy Grade:
1/2” x 1/2” x 3/8”
Styrene - White, Black or Specular Silver
Acrylic - White
.300”
7,6mm
.625”
15,9mm
TC500 Specification Grade:
1/2” x 1/2” x 3/8”
Styrene - White or Black
Acrylic - White
.312”
7,9mm
.50”
12,7mm
Aluminum Eggcrate
.50”
12,7mm
AT: 1/2” cube aluminum
AT1: 1” cube aluminum
.50”
12,7mm
1”
25,4mm
1”
Finishes: baked white enamel, mill finish, clear anodized or black enamel.
25,4mm
Custom sizes available.
55
Parabolic Aluminum
Louvers
Lumiflux L14 is the industry standard
shallow parabolic aluminum louver.
• L14 is designed to fit most luminaires
• Trimmable flange
• Cell configurations that satisfy typical
applications.
Lumiflux L25 is a high side louver
• White and Semi-specular finish.
• Blades widely angled for enhanced
vertical footcandles without
sacrificing horizontal levels.
• Optics that are best suited for
situations requiring an extremely
broad distribution at high angles
• Made to Order.
56
Wrap Tab
Lumiflux L30 is a highly versatile parabolic aluminum louver that is suited for
ceiling and luminaire applications.
• Nominal 3” (67mm) deep
• Variable configurations and blade spacing available
• Sizes up to 63” (1600mm) square when flanged
• Spring loaded latches, hinges and optional wrap tabs can be attached to the
perimeter to fit the fixture.
• Avalable in Knock-Down Parts
Aluminum Hardware
Springs for L30 Louvers: With a right hand spring and a left hand spring the
latches work more freely. The small diameter wire allows for a standard rivet to
be used.
Left Spring
Right Spring
57
Aluminum Hardware
Hinges
Spring Hinge: Available in Black
Anodized and White
Latches
Spring Latch: Available in White and
Black Anodized
Cam Hinge: Available in Silver
Cam Latch: Available in White and
Silver
Rivets
Black Pop Rivet for
Hinges and Springs
58
Rivet for
Spring Latch
Rivet for Cam
Rivet for
Wrap Around Tab
Parabolic Aluminum
Baffles
Straight Blade Baffle ATTB:
The elemental simplicity of Aluminum Thincell Straight Blade
Baffles compliment the widest range of interior decors.
• 45 degree cut-off provides uniform shielding from the light
source
• cross blades 1” (25mm) deep
• 1” (25mm) on center and available in trimmable widths
• Custom widths, blade centers and side details are available
for luminaires and ceiling applications.
Parabolic Aluminum Baffle LB14
• Available as highly adaptable stock parts
• Cross blades 2” (51mm) or 3” (76) on center
• Can be manufactured to meet specific requirements.
• Nonflammable aluminum baffles are 1.4” (35mm) deep to
assure maximum luminance control.
• Each 4’ part begins and ends with a half cell (1” or 1-1/2”)
so that the baffles can be butted end to end for a continuous
appearance.
59
Retrofit Kits
Retrofit Kits assemblies are designed to be installed between an existing
luminaire and the inverted tee bar ceiling system.
RFK3™
Retrofit any existing lay-in fixture into a deep
cell parabolic aluminum louver.
2’x4’: 12, 18 or 32 cell
2’x2’: 9 or 16 cell
Finish: Semi-Specular or White
RFK2™
Retrofit any existing lay-in fixture (including 3”
deep aluminum) with a standard white steel
door frame. 1/2” Frame will accept any lens,
louver or eggcrate.
2’x4’, 2’x2’ and 1’x4’
60
After:
Before:
RFK3 Retrofit System
ANY Lay-in Light Fixture that has an existing Lens, Louver, or
Eggcrate installed.
1. Remove and discard existing door frame.
2. Ensure that there is clearance in plenum area, then lift up the existing fixture.
(Clearance Required: 1” for RFK2, 2-1/4” for RFK3)
3. Install outer frame into T-bar and place the existing fixture on top of outer
frame.
4. Install the RFK2 or RFK3 into the outer frame and latch closed.
After:
Before:
RFK2 Retrofit System
61
SLP LIGHTING
1400 S. OLD HIGHWAY 141
FENTON, MO 63026 USA
PHONE: 800.248.0224 / 636.600.4084
FAX: 636.600.4108
[email protected]
WWW.SLPLIGHTING.COM
62
LENSES & MORE
PRISMATIC LENSES - WRAP AROUND LENSES
OUTDOOR REPLACEMENT LENSES - SAFETY TUBE GUARDS - CITADEL 1
Lenses
A lens is a flat sheet of plastic, usually clear or white. The distribution of the light
is skewed depending on the pattern of the lens. Random and uncontrolled distribution creates a bright area of light. With certain patterns, the lamp image is
reduced.
NanoPrism:
Ideal for shielding the LED image while keeping 89% Light
Transmission
• Thickness: .118”
• Standard size 2’x2’
• NP-22-118
Translucent Acrylic:
• Acrylic
• Frosted White or Matte Clear
• Thickness: .040” or .080”
• Standard sizes up to 2’x4’
64
Cracked Ice:
• Styrene
• Frosted White or Clear
• Thickness: .065”, .070” or .125”
• Standard sizes up to 50’x100’
Prismatic Pattern 12:
The industry standard 3/16” female prismatic lens.
• Thickness: .100”, .110” or .125”
• Acrylic and Styrene (Polycarbonate Special Order)
• Standard sizes up to 50”x100”
Prismatic Pattern 15:
The bold 3/8” female prism of Pattern 15 offers reduced
glare and an upgraded appearance.
• Thickness: .200”
• Standard sizes up to 4’x4’
Prismatic Pattern 19:
The 3/16” male prism of Pattern 19 offers the lowest glare
of the prismatic lenses.
• Thickness: .156”
• Standard sizes up to 4’x4’
65
Wraparound Lenses
•
•
•
Injection Molded Wrap Around Lenses
Endcaps, Springs and Clips
A wide selection of replacement wraparound lenses
Wraparound Lens Replacement Is Simple!
To Order:
Either send a full size sample of your existing
diffuser or if this is impractical:
1. Provide critical dimensions or trace the
profile of the diffuser on a piece of paper.
2. Measure the exact length of the diffuser.
3. Fax or mail this information to SLP Lighting
66
Before:
After:
Outdoor Replacement
Components
Injection Molded Drop Lens:
• 12” x 12”
• 20” x 20”
Our precision injection molded drop lenses
provide maximum controlled illumination.
They have an asymmetrical light distribution
designed specifically for service station and
parking lot applications.
DL-A-1212 OR DL-PC-1212
DL-A-2020
2-1/2”
63,5mm
2-1/2”
63,5mm
12”
304,8mm
12”
304,8mm
20”
508mm
20”
508mm
Globes & Acorns:
• Polycarbonate
• Acrylic
• Smoked, Clear, White or
Linear Prism
67
Safety Tube Guards
Tube Guards are a must for any area in which debris from a broken lamp
cannot be tolerated.
•
•
•
Polycarbonate Standard
To fit T12, T8 or T5 Lamps
4’ and 8’ Lengths
•
•
•
UV Filtering Acrylic
Not recommended for T5HO lamps
Special Order on Colors
ue
Bl
Endcaps
en
e
Gr
d
Re
w
lo
nk
Pi
g
Bu
l
Ye
r
ea
Cl
NEW T5HO Tube Guard features an increased size and venting endcaps.
The increased size allows a greater distance of the guard from the hottest point
of the lamp near the end of the lamp. The T5 HO Tube Guard is suitable for use
with T5 HO lamps in normal operating conditions where the surface of the lamp
does not exceed 200°F.
"A" - CUT TUBE LENGTH
T5 - HO
T-5 HD TUBE GUARDS
.94
Black
Endcaps
P/N
NOM.
LENGTH
COLOR
DIM. "A"
DIM "B"
PACK
ST5HO-4
4'
CLEAR
44.68
45.27
24
"B" - OVERALL LENGTH
T5HO-24
T5 HO Tube Guards
Nominal Length
4’
Color
Clear
NOTE:
1) TOLERANCE = CUT TUBE LENGTH +.00/-.06
DIM
“A” CAP MATERIAL:
44.68”
2) END
BLACK POLYPROPYLENE
3) WALL
.015 .002
DIM
“B” THICKNESS:
45.27”
68
-
ADDED ST5HO-4
REV
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
DESCRIPTION
TITLE:
CITADEL 1
TM
Citadel 1™ is the traditional damp and wet location enclosure. Designed for a
strip fixture to be mounted inside the fiberglass housing for use with T5, T8 or
T12 lamps.
Kits Include:
• Fiberglass Housing
• Acrylic Lens with
Matte Finish
• Latch Bag
• Endplugs
IM Series Kit:
VF Series Kits:
4’ & 8’ Available
Shallow: 4’
Deep: 8’
7.5”/190,5mm
7.5”/190,5mm
7.5”/190,5mm
2.75”
69,9mm
2.75”
69,9mm
2.75”
69,9mm
2.5”
63,5mm
2”
50,8mm
3”
76,2mm
Hardware and Accessories
Mounting
External
Mounting
Bracket
Latch
Plastic Celcon Latches
Stainless Steel Latches
Accessories
Rubber Endplugs
Dicast Bushings
Citadel 1™ Lenses:
Lenses
4 Foot 8 Foot Injection Molded Lens:
2.5” Injection Molded Lens
+
2” Vacuum Formed Lens
+
3” Vacuum Formed Lens
Vacuum Formed Lenses:
+
2.5”
2”
3”
+
69
SLP LIGHTING
1400 S. OLD HIGHWAY 141
FENTON, MO 63026 USA
PHONE: 800.248.0224 / 636.600.4084
FAX: 636.600.4108
[email protected]
WWW.SLPLIGHTING.COM
70