SR Technics corporate brochure - eurotec

C O R P O R A T E
B R O C H U R E
2 0 1 4
Suppliers to Construction Fit-out Rail
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Suppliers to Construction Fit-out Rail
INTRODUCTION
Eurotec have been committed suppliers to the fit-out and construction industry for over
20 years. We supply an immense range of products all over the uk on a next day delivery
basis.
At eurotec we take pride in our ability to provide a range of quality products and services
in an increasingly demanding and competitive marketplace.
We are continually aiming to improve our products and services through ongoing
investment, research and development.
Our aim is to always provide a ‘total supply solution’ for our customers. To do this we go
above and beyond the normal supply service by sourcing any new products required, by
supplying information and products to help reduce our customers and our environmental
impact. We also keep up to date with all health and safety requirements so that we can be
one step ahead of legislation and help advise our customers of any new requirements or
products to suit our customers needs.
Another service that we offer is the supply of site set up packs, these packs will contain
pre-approved standardised items required to start a site.
All eurotec staff are trained to work with customer satisfaction in mind, this means that
we will always do our upmost to supply our customer what they require when they
require it.
We provide the following services:
We provide the following products:
Our services consist of but are not limited to the following
Our services consist of but are not limited to the following
Embroidery and heat seal transfers
Digital printing and artwork service
Customer branded brochures
Site visits
Face-fit test and tool box talks
Fire extinguisher servicing
H&s and environmental information
Next day delivery
Protection materials (standard or branded)
Signage (h&s standard and branded)
PPE (standard or branded)
Corporate clothing (standard or branded)
Site equipment and canteen supplies
First aid and fire equipment
Janitorial and general waste products
Tools and fixings
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Suppliers to Construction Fit-out Rail
SERVICE LEVELS - DISTRIBUTION
Uk wide 24/48 hour distribution preferably using own transportation network.
Eurotec depots:
Essex (main office)
York
All of our deliveries will be on a free next
working day delivery basis where possible.
If there is an occurrence that holds up the
delivery i.e. Non stock items, the site manager
will be informed and kept regularly updated
by a member of staff from eurotec.
All of our vehicles have trackers fitted allowing
us to track their progress throughout their
scheduled routes.
Our operating times for despatching goods are
between 6am - 5:30pm. Timed deliveries are
available upon request, for an extra charge.
Delivery methods are listed below:
London (within m25) - own vehicles/next day delivery
Home counties (outside m25) - own vehicles/next day delivery
South west - own vehicles/next day delivery or next day courier
Midlands - own vehicles/next day delivery or next day courier
Northern - own vehicles/next day delivery or next day courier
Scotland - next day courier
Mainland europe - next day courier
Other uk areas not covered above- next day courier
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Suppliers to Construction Fit-out Rail
SERVICE LEVELS - STOCK LEVELS, CORE STOCK ITEMS
AND ORDERING
Core stock levels on focussed range of group products.
Eurotec will hold stocks of a focussed range of group products including all branded items and site
consumables as required. These items will have regular usage reports run on them to determine the
stock levels required to keep up with demand. Usage factors such as season/weather and new
projects will also be taken into account.
24 hour delivery for all core stock items.
All core stock items will be on a next day delivery basis, if for any reason the core stock items cannot
be delivered next day, due to factors beyond our control, one of eurotec’s dedicated staff members
will contact the site manager with details of when the items can be delivered or to offer an
alternative product that is suitable for purpose.
Ordering and order tracking
When sending an enquiry/order to eurotec it will be processed promptly and efficiently by eurotec’s
staff, trained in the specific requirements of each customer. We can be contacted by phone; fax,
e-mail and through our website, each form of communication will be dealt with as quickly and
efficiently as possible. Eurotec’s office hours are 7:30am-6pm; out of hour contact numbers are
available at all times i.e. Mobile phone.
If you need to track an order, contact one of our customer service team, who will be able to find out if
it has been delivered or when it will be delivered. All of our vehicles have trackers fitted allowing us
to track their progress throughout their scheduled routes to give our customers all the information
required about their delivery.
SERVICE LEVELS - BROCHURES
PRODUCTION OF COMPANY SPECIFIC CORE PRODUCT BROCHURES
Eurotec’s graphic department will work with each company to set up a company specific product
brochure. This will be tailored to suit the needs of the company and will show all oroducts required,
branded and non-branded.
The brochure will also include company specific order-forms, tailored to suit the needs of each
company.
Both the brochure and the order-forms will be available in hard copy or electronically as required.
High visibility waist coat c/w logo
Personal protection equipment
Class 2 to EN471
Small - XX Large
A full range of PPE is also available on the order forms including:
Ear Protection
e
te raltoegu gue
a
r
a
o
te
o
l
t
po
po
arCorporate
artaatalogue
rpoorC
C
Co C C C
Catalogue
Ear defenders
Ear Plugs box 250 packed in pairs
Breathing Apparatus
Fold flat dust mask
FFP2 (221) x20
Stealth 1000
h
ing
rk
Wo
Fold flat dust mask
FFP2 (222) Valved x10
Rubber twin cart
½ mask resp - blue
+ P3 H.E Twin cartridge
Fold flat dust mask
FFP3 (232) Valved x10
Eye Protection
wit
Stealth 4100
PA800
Lucerne Plus clear
over spectacles
Jupiter goggle
Gloves
il
Ltd
Ra
up d,
Gron Roa F
c
6L
rote aldo M3
Eu , M x C
07
ea se
22 k
l Ar n, Es
1 74 .u
ns
62 p.co .uk
stria do
Co
(0)1 grou p.co
to
Indu hing
44 tec- grou
fair Latc
liers
c- il
- F+ euro teRa
May
40
ro
Supp
47 [email protected]
eu t
p Ltd
sa wFit
w
GrouRoad,
1 74 E on
ec
62 cti
n
F
W
Eurot Maldo 3 6L
(0)1 tru
CM
a,
44 Cons
l Are Essex
07
rs to
lieT+
ustria don,
7422 k
ir Ind tching
Supp
1621 p.co.u k
Mayfa La
44(0) -grou p.co.u
F+
urotec -grou
40 7447sales@e ut
Rail
urotec
21
w.e
Fit-o
E
16
W ww
44(0) truction
Ltd
T+to Cons
Group
Eurotec on Road,
Suppliers
Area, Mald
CM3 6LF
Industrial
Essex
Mayfair Latchingdon,
742207
44(0)1621 p.co.uk
40 - F+
-grou
1621 7447sales@eurotec roup.co.uk
E
T+ 44(0)
.eurotec-g
Suppliers
to Construction
W wwwFit-out Rail
t
ou
ith n
g wtructio
Fit-
Kriss Cross High grip PVC lattice finish
on a knitted base. (114X)
rkin
Wo
Working
with
Working with
Eurotec Group Ltd
Mayfair Industrial Area, Maldon Road,
Latchingdon, Essex CM3 6LF
T+ 44(0)1621 744740 - F+ 44(0)1621 742207
E [email protected]
W www.eurotec-group.co.uk
310 Grip Gloves orange - pairs
(2142) Seamless cotton/polyester liner.
Latex coated palm, ventilated back.
Resistant to abrasion, protects from micro-cuts
and ensures excellent grip.
Extra Text
Extra Text
Ninja X4 Cut 4 bi-polymer protection
(4431) Seamless nylon/glasfibre liner
bi-polymer coated palm.
Excellent grip in both wet and dry environments.
High abrasion and tear resistance.
An ‘Extra text’ service is available from
Eurotec. If you wish to have your Site Name,
Client name or any important information
about the person wearing PPE, for
example First aider, Firewarden or Site
Manager. Please contact the Eurotec sales
team for more information.
Ansell Hyflex Excellent flexibility and fit,
cut resistant to EN level 3 (4342)
Suppliers to Construction Fit-out Rail
Eurotec Group Ltd
Essex CM3 6LF
T+ 44(0)1621 744740 - F+ 44(0)1621 742207
E [email protected] W www.eurotec-group.co.uk
PVC Knitwrist Fully coated knitwrist for general
handling, with good dry grip(4121)
Standard rigger Multi-purpose heavy duty glove
372 Assembly Grip - Fully coated
(4121) Seamless cotton/polyester liner.
Nitrile coated glove.
Model with a Nitril coating that covers
the hand completely.
Dyflex Gloves white boxes 48
(4343) component, general assembly
and electronics
Rhyolite Flexible, lightweight glove.
(4131) Seamless nylon liner
PU coated palm. Ideal for precision tasks
requiring dexterity and flexibility.
Gauntlet 27mm chemical resistant PVC
(4121)
Cotton liner for use under other gloves.
Rubber Gloves GP (marigold type) For general cleaning
Suppliers to Construction Fit-out Rail
Eurotec Group Ltd
Essex CM3 6LF
T+ 44(0)1621 744740 - F+ 44(0)1621 742207
E [email protected] W www.eurotec-group.co.uk
Suppliers to Construction Fit-out Rail
SERVICE LEVELS - H&S POSTERS
Provision of health and safety posters – gloves and eyewear.
Eurotec provide a wide range of health and safety posters. From standard hse posters to
bespoke product posters tailored to suit the requirements of each company.
Along with the posters, eurotec can also provide ‘tool box talks’ about any of the ppe
products on site when required. These talks will be carried out by professionals trained in
the specifications and health and safety requirements of each product.
If you require something more hands on than a poster, eurotec can create ppe boards.
These ppe boards can be printed with information about the products and have a sample
of each of the products actually attached to the board so that personnel can try them out
or test them for purpose as required.
Hand
Protection
Rigger Glove (05RIGGERSTD)
Criss-Cross (05KRISSCROSS)
Split leather design
for minimal risks
Multi-purpose heavy duty glove
Knitted Liner with a PVC criss cross pattern
CE EN 388 Standard 114X
Good all round general handling.
Not recommended where resistance to
puncture from sharp objects ir required.
Gauntlet gloves(05GUANTLETS)
Cotton Liner (05COTTONLINER)
PVC Knitwrist (05PVCNITWRIST)
PVC Coated gauntlet on cotton liner
Size 9.5x27mm
CE EN 388 Standard 4121
Excellent resistance to acid and alkalis
Chemical handling and drainage works.
Cotton
One size only
To be worn under other gloves
Fully PVC coated knitted glove
Sizes 8-10 in red
CE EN 388 Standard 4121
Fore general handling
Dry grip/Flexable
Ansell Hyflex (05ANSELLHYF)
Knitted and dipped glove
Sizes 6-11
CE EN 388 Standard 4342
General purpose, small component
and product protection
Kut-stop Gloves (05KUTSTOP)
UVEX 3 Digit gloves (05UVEX3DIGIT)
Knitted Dyneema / Polyurethane coating
Sizes 8-10 Pairs / white
CE EN 388 Standard 4343
Provides resistance to cut, abrasion and tear
For use in component handling / assembly.
Knitted Dyneema / Polyurethane coating
Sizes 8-10 Pairs
CE EN 388 Standard 4343
Provides resistance to cut, abrasion and tear
For use in component handling / assembly.
Grip Gloves (05GRIPGLOVE)
Palm fit gloves (05PERFECTBLK)
PU Glove (05PUGLOVE)
Polycotton shell - latex coating
Sizes L-XL orange
CE EN 388 Standard 2142
General purpose, resistant to abrasion,
protects from micro-cuts, excellent grip
Knitted lightweight polyamide
Sizes 6-10 in Black
CE EN 388 Standard 4121
Excellent dexterity / strong polyamide
Rhyolite lightweight polyamide
Sizes 6-10 in Black/Grey
CE EN 388 Standard 4131
For Precision tasks requiring
dexterity and flexibility
372 Grip Gloves (05372)
Ninja X4 gloves (05NINJAX4)
Polycotton liner / fully Nitrile coated
Sizes 9-10 in White
CE EN 388 Standard 4121
Assembly Grip use
Nylon/glassfibre liner bi-polymer coated palm
Sizes 9-10 in Black
CE EN 388 Standard 4431
Excellent grip in wet and dry environments,
high abrasion and tear resistance.
Suppliers to Construction Fit-out Rail
T+ 44(0)1621 744740 F+ 44(0)1621 742207
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
E [email protected]
W www.eurotec-group.co.uk
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Suppliers to Construction Fit-out Rail
EUROTEC’S CERTIFICATIONS:
We are proud to have been certified by the british standards institute (bsi) to the iso 9001
Quality standard for over 10 years, to the iso 14001 environmental standard for over 5 years
and more recently certified to both the iso 18001 health & safety standard and the 50001
Energy management standard (replacing 16001 sustainability standard). In fact Eurotec are one
of the first companies that have gained certification to the 50001 standard and one of only a
handful of companies that have been certified to all four standards.
9001
FS 37588
Being certified to these standards helps us to monitor and measure our service levels and to
reach the service targets that we have set based on customer requirements.
In addition to bsi, we are also certified by achillies to the link- up, building confidence and the
Uvdb schemes. Plus we are members of various relevant trade associations.
14001
EMS 516110
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Membership No. 0224
Certification benefits and awareness:
18001
OHS 575806
Sustainable supply chain
Up to date on h & s requirements
Environmental product range
Carbon reduction schemes
50001
Coshh and date sheets for products
ENMS 575804
Focus on customer service
Continual improvement schemes
Policies and targets endorsed by management.
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Suppliers to Construction Fit-out Rail
BRANDING
Eurotec offer a complete in-house branding service. All items of corporate clothing and PPE
Can be branded with your company logo, site details or job roles on a next day basis.
Our eight/twelve thread embroidery machine that can produce full colour detailed embroidery
On most items of clothing. We also have heat seal machines and a digital printer/cutter to
Produce and apply permanent branded transfers onto clothing.
BRANDING
One of eurotec’s investments has been in an Inca Spyder
flat bed digital printer, capable of printing a wide range
of materials up to 3mx1.5m and 50mm thick. We hold a
vast stock of pre-cut signage material so that signage
can be available for next day delivery.
EUROTEC GRAPHICS TEAM
Eurotec’s graphics team are on hand to produce artwork
approvals for all branded items. These approvals
illustrate print restrictions, colour and layout taking
into account any company branding guidelines.
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Suppliers to Construction Fit-out Rail
CONTACT INFORMATION
Eurotec Group LTD - head office
Mayfair industrial area, Maldon road,
Latchingdon, Essex, CM3 6LF
T + 44(0)1621 744740
F+ 44(0)1621 742207
E [email protected]
W www.eurotec-group.co.uk
KEY CONTACTS:
Account Managers
Ben Howlett
Sales Manager
+44(0)1621 744740
+44(0)7817 322 745
[email protected]
Tony Burrows
Managing Director
+44(0)1621 744740
+44(0)7780 830832
[email protected]
Michelle Coote
Customer Support Supervisor
+44(0)1621 744740
[email protected]
Chris Carter
Technical Support and H&S Manager
+44(0)1621 744740
+44(0)7773 322884
[email protected]
Purchasing
Grant Kendall
+44(0)1621 744740
[email protected]
Operations Assistants
Daniel Mead
+44(0)1621 744740
+44(0)7947 363013
[email protected]
Graphics
Pearl Read
+44(0)1621 744740
[email protected]
Emily Saffill
+44(0)1621 744740
+44(0)7866 534763
[email protected]
Luke Hendry
+44 (0) 1621 744740
[email protected]
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Accounts
Sue Lawrence
Accounts Manager
+44(0)1621 744740
[email protected]
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
F/R Total Protection Board c/w logo
1220x2440mm 2mm
F/R To LPS 1207
550mm
Total Board - Flame Retardant Protection Board
2.440m
APPROVED TO LPS1207
2MM / CERT NO. 803a
Total Board - Flame Retardant Protection Board
APPROVED TO LPS1207
2MM / CERT NO. 803a
1.220m
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Protection Materials
Scaffold Sheeting
Totalfilm
TotalfilmEmbossed
Embossed
Floor
FloorProtection
Protection
Impact resistant anti-slip
profiled sheeting
F/R to LPS 1207 - 1.82mx55m / White
Alpha Maritex
Laminated, reinforced
polyethylene sheet
for enclosing scaffolding
F/R to LPS 1207 - LPS 1215
Size: 2MTR x 45MTR
F/R Woven glass fibre
Fabric c/w Aluminium
Polymer 1.5M
Carpet protection film
Polythene sheeting
Tac Mats
1200MM Non F/R
600MM Non F/R
600MM F/R - Low Tac
4M X 50M HD TPS
3.6M X 20M 700G Clear
4M X 25M 1000G Clear
4M X 25M 1000G White F/R TO LPS1207
4M X 25M 1000G Orange F/R TO LPS1207
Standard 30 sheet 36"X36"
H/D C/W Frame 36 Sheet
900MM X 600MM
Prop poles
Foam Protection
Plastic protection
For setting up temporary
partitions - Twist to lock.
3M Extension
4M Extension
2M Foam hand rail protectors
2M Foam door jam protectors
Molded plastic
door jam protectors
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Corporate signs c/w logo
Information signs 600mmx450mm
Other sizes available
Please sign
in at desk
Canteen
Supplied by Eurotec - +44 (0)1621 744740
001
002
Supplied by Eurotec - +44 (0)1621 744740
002
001
Meeting
Room
003
Welfare
Area
Supplied by Eurotec - +44 (0)1621 744740
004
Supplied by Eurotec - +44 (0)1621 744740
004
003
Site
Entrance
005
Site Office at
rear of building
Supplied by Eurotec - +44 (0)1621 744740
005
006
Supplied by Eurotec - +44 (0)1621 744740
006
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Corporate signs c/w logo
Information signs 600mmx450mm
Other sizes available
Site Toilets
located
on level 1
Site Office
located
on level 1
007
Supplied by Eurotec - +44 (0)1621 744740
007
The number on this sign can be substituted to what you require eg: 5 etc
008
008
Site Entrance
located
on level 1
009
The number on this sign can be substituted to what you require eg: 5 etc
010
010
We wish to apologise for
any inconvenience caused
during these works
011
The number on this sign can be substituted to what you require eg: 5 etc
Canteen
located
on level 1
Supplied by Eurotec - +44 (0)1621 744740
009
Supplied by Eurotec - +44 (0)1621 744740
Supplied by Eurotec - +44 (0)1621 744740
The number on this sign can be substituted to what you require eg: 5 etc
Site Toilets
Supplied by Eurotec - +44 (0)1621 744740
011
012
Supplied by Eurotec - +44 (0)1621 744740
012
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Corporate signs c/w logo
Information signs 600mmx450mm
Other sizes available
Site
Personnel
Site Office
013
Supplied by Eurotec - +44 (0)1621 744740
013
014
Supplied by Eurotec - +44 (0)1621 744740
014
Site
Office
015
015
Supplied by Eurotec - +44 (0)1621 744740
The arrow on this sign can be substituted to what you require eg: left or right
016
016
017
Supplied by Eurotec - +44 (0)1621 744740
The arrow on this sign can be substituted to what you require eg: left or right
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
The arrow on this sign can be substituted to what you require eg: left or right
Site
Entrance
Site
Toilets
017
Supplied by Eurotec - +44 (0)1621 744740
Association of
Interior Specialists
018
018
Supplied by Eurotec - +44 (0)1621 744740
The arrow on this sign can be substituted to what you require eg: left or right
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Corporate signs c/w logo
Information & Health and safety signs 600mmx450mm
Other sizes available
Pedestrians
Visitors
019
Supplied by Eurotec - +44 (0)1621 744740
019
The arrow on this sign can be substituted to what you require eg: left or right
020
020
Site Name:
Site Manager:
Mob No:
Site No:
Supplied by Eurotec - +44 (0)1621 744740
The arrow on this sign can be substituted to what you require eg: left or right
Emergency
Exit
021
Supplied by Eurotec - +44 (0)1621 744740
021
022
Supplied by Eurotec - +44 (0)1621 744740
022
Fire
assembly
point
023
First
aid
Supplied by Eurotec - +44 (0)1621 744740
023
024
Supplied by Eurotec - +44 (0)1621 744740
024
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Corporate signs c/w logo
Health and safety signs 600mmx450mm
Other sizes available
!
All rubbish to
be placed in
skips or bins
provided & not
left on site
025
Safety helmets
and
safety footwear
must be worn
Supplied by Eurotec - +44 (0)1621 744740
025
026
Supplied by Eurotec - +44 (0)1621 744740
026
!
Safety
footwear
must be
worn
All drivers &
visitors must
report to the
site office
027
Supplied by Eurotec - +44 (0)1621 744740
027
028
Supplied by Eurotec - +44 (0)1621 744740
028
!
This is a
hard hat
area
All deliveries
to be via
rear of building
029
Supplied by Eurotec - +44 (0)1621 744740
029
030
Supplied by Eurotec - +44 (0)1621 744740
030
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Corporate signs c/w logo
Health and safety signs 600mmx450mm
Other sizes available
Hi-Visibility
clothing and
safety footwear
must be worn
031
Ear defenders
must be worn
Supplied by Eurotec - +44 (0)1621 744740
031
032
Supplied by Eurotec - +44 (0)1621 744740
032
!
Danger
All visitors
must report
to site office
033
!
Supplied by Eurotec - +44 (0)1621 744740
033
Keep
outout
Keep
034
Supplied by Eurotec - +44 (0)1621 744740
034
Beware
Danger
This scaffolding
is alarmed
Building Site
035
Supplied by Eurotec - +44 (0)1621 744740
036
Supplied by Eurotec - +44 (0)1621 744740
036
035
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Corporate signs c/w logo
Health and safety signs 600mmx450mm
Other sizes available
Beware
Danger
Trip hazard
Construction work
in progress
037
Supplied by Eurotec - +44 (0)1621 744740
038
Supplied by Eurotec - +44 (0)1621 744740
038
037
Warning
Beware
Floor incomplete
Open floor
voids
039
Mind gaps in floor
Supplied by Eurotec - +44 (0)1621 744740
040
Supplied by Eurotec - +44 (0)1621 744740
040
039
Danger
Danger
Electrical
hazard
Demolition work
in progress
041
Supplied by Eurotec - +44 (0)1621 744740
041
042
Supplied by Eurotec - +44 (0)1621 744740
042
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Corporate signs c/w logo
Health and safety signs 600mmx450mm
Other sizes available
Caution
Danger
Site entrance
Live wires
043
Supplied by Eurotec - +44 (0)1621 744740
044
Supplied by Eurotec - +44 (0)1621 744740
044
043
Danger
Danger
400 Volts
240 Volts
045
Supplied by Eurotec - +44 (0)1621 744740
045
046
Supplied by Eurotec - +44 (0)1621 744740
046
Caution
Danger
Asbestos
removal
Out of order
Supplied by Eurotec - +44 (0)1621 744740
047
047
048
Supplied by Eurotec - +44 (0)1621 744740
048
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Corporate signs c/w logo
Health and safety signs 600mmx450mm
Other sizes available
No
access
049
Contractors
parking only
Supplied by Eurotec - +44 (0)1621 744740
049
050
Supplied by Eurotec - +44 (0)1621 744740
050
Do not lean
material
against
No smoking
walls, it damages
on
site
them
No
unauthorised
entry
051
Supplied by Eurotec - +44 (0)1621 744740
051
052
Supplied by Eurotec - +44 (0)1621 744740
052
No
smoking
Do not
lean
Do not lean
material against
walls, it damages
them
No
smoking
053
material against
It isitagainst
the
walls,
damages
lawthem
to smoke in
these premises
Supplied by Eurotec - +44 (0)1621 744740
053
Supplied by Eurotec - +44 (0)1621 744740
054
054
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Corporate signs c/w logo
Health and safety signs 600mmx450mm
Other sizes available
COMPLETED AREA
No entry to
working area
before reporting
to site office
No smoking,
food or
drink allowed
055
Supplied by Eurotec - +44 (0)1621 744740
055
056
Supplied by Eurotec - +44 (0)1621 744740
056
No
entry
057
No unauthorised
persons beyond
this point
Supplied by Eurotec - +44 (0)1621 744740
057
058
Supplied by Eurotec - +44 (0)1621 744740
058
Fire
point
No entry
Site
compound
059
Supplied by Eurotec - +44 (0)1621 744740
060
Supplied by Eurotec - +44 (0)1621 744740
060
059
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Corporate signs c/w logo
Safety Notice Board 1700x1200mm
Supplied by Eurotec - +44 (0)1621 744740
061
061
Comes complete with pockets and Health and Safety law poster.
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Corporate signs c/w logo
Think safety sign 1000mmx1500mm
THINK SAFETY
No unauthorised entry
Safety helmets, safety footwear and high visibility
clothing must be worn at all times on this site
!
!
You must be
safety inducted
to start work
on this site
Wear respiratory,
eye, ear and hand
protection where
appropriate
062
All visitors and
delivery drivers
must report to
the site office
Supplied by Eurotec - +44 (0)1621 744740
062
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Corporate signs c/w logo
Waste signs 400x600mm
Available in various materials
Branded waste signage
(400x600mm) Available as follows:
Rigid PVC Skip sign - c/w lip for hooking over skips/bins
Rigid PVC - plain
or Self adhesive vinyl.
Inert
waste only
Wood
only
Non - hazardous
Brick
Concrete
Supplied by Eurotec - +44 (0)1621 744740
Supplied by Eurotec - +44 (0)1621 744740
081R Rigid PVC c/w Lip
088R Rigid PVC
081S S/A/V
080R Rigid PVC c/w Lip
087R Rigid PVC
080S S/A/V
Cardboard
only
Supplied by Eurotec - +44 (0)1621 744740
084R Rigid PVC c/w Lip
091R Rigid PVC
084S S/A/V
Plasterboard
only
Supplied by Eurotec - +44 (0)1621 744740
085R Rigid PVC c/w Lip
092R Rigid PVC
085S S/A/V
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Mixed
waste
Hazardous
waste
only
Supplied by Eurotec - +44 (0)1621 744740
Supplied by Eurotec - +44 (0)1621 744740
082R Rigid PVC c/w Lip
089R Rigid PVC
082S S/A/V
083R Rigid PVC c/w Lip
090R Rigid PVC
083S S/A/V
Metal
waste
only
Supplied by Eurotec - +44 (0)1621 744740
086R Rigid PVC c/w Lip
093R Rigid PVC
086S S/A/V
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
External signs c/w logo
hoarding board signs
Hoarding boards - 3 parts
3x 1220mmx2440mm 2mm Rigid Plastic
Hoarding
Stickers
Tel:
Web:
Example Layout
Bespoke hoarding design: 1220mm x 300mm stickers
G GARSIDELAYCOCK
QUALITY AS STANDARD
Tel:
Web:
G GARSIDELAYCOCK
QUALITY AS STANDARD
Tel:
Web:
Example Layout
Hoarding Stickers:
Tel:
Web:
G GARSIDELAYCOCK
QUALITY AS STANDARD
48S 1220x300mm
47S 1220x300mm
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
External signs c/w logo
Banners and window stickers
Banners
Made from PVC, complete with hem & eyelets.
Small
032B Banner Small Single Sided
071B Banner Small Double Sided
0.6m x 3.0m
0.6m x 3.0m
Medium
033B Banner Medium Single Sided
072B Banner Medium Double Sided
1.2m x 6.0m
1.2m x 6.0m
Large
034B Banner Large Single Sided
073B Banner Large Double Sided
2.4m x 12.0m
2.4m x 12.0m
Window stickers
To be fixed onto the inside of externally facing windows or glazed door panels.
Three window stickers are available, feel free to use a variety of different stickers
on your site but make sure at least one has the full brand.
Window stickers are 600x600mm and made of self adhesive plastic.
Tel:
Web:
35S 600x600mm
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
36S 600x600mm
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Co-ordination board
Display board with frame and wheels
Health and Safety starter package includes useful signs for either setting up or
replenishing your safety signage stock. Hanging instructions are in brackets.
Rigid Plastics signs, contents as below:
1x Health and Safety Law poster (on safety notice board)*
1x Emergency resuscitation poster*(on door to high voltage switch room,
usually on back door)
1x Manual handling regulations poster (welfare area/lobby)
1x Personal protective equipment poster (welfare area/lobby)
1x Safety signs and their meanings poster (welfare area/lobby)
1x Fire action sign (Safety notice board and at fire exits/fire points)*
1x Fire aid sign (’where to find first aid kit’ should be on the safety notice
board, if marking the first aid position it should be adjacent to first aid kit)
1x Your first-aider is sign (safety notice board)*
1x Fire point sign (at fire points)*
1x Fire extinguisher colour code sign (at fire point)
1x Accident record book (with first aid kit)*
* = signs are required on every site
Steel frame and display board
Addtional signage not included
The co-ordination board consists of a lightweight easy
to put together frame and a lightweight board that
slots into the frame.
The wheels have a locking mechanism
which means the frame can be secured in position.
Please note The Co-ordination board
does not come with any additional signage,
it is for display purposes only.
Steel frame and display board
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Barrier System & E-Cones
Please contact Eurotec for more details
2M Barrier
with logo stickers if required.
Key features
- Precision injection moulded construction
- Struts in central area to give extra stability
- Easy linking system
- Reflective area to BS873 Part 6 Class 2
- Swivel feet
E-Cones
- Heavy duty, 100% recycled cones
- Designed for maximum stability, ease of handling and storage
- Ideal for use in most traffic control situations on roads and emergency works
- Available in 510mm and 750mm sizes
- Supplied with reflective sleeves to meet en13422
- Twin band sleeves available for export for 1000mm and 750mm cones
- Can be supplied with coloured bases for corporate
identity, and embossed with company name or logo (minimum
order quantity)
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Fire safety, first aid, janitoral & canteen
Please contact Eurotec for more details
Fire Safety Equipment
Fire Extinguishers
Fire Stands / Trolleys
Fire Alarms
Safety Equipment
First Aid Equipment
First aid kits
Plasters
Eye wash
Dressings
Canteen & Janitorial
White Goods
Seating
Plates / Cutlery
Consumables
Cleaning Products
Paper Towels
Buckets and Bins
Mops and Brooms
Air Fresheners
9001
14001
18001
50001
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Accredited
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Personal Protection Equipment
Hard hats
HEAD PROTECTION
Technical Specifications / Requirements
Safety Helmets
A safety helmet is required in any location where there
is a residual risk of a head injury from being struck by
falling objects, or where protection from a penetration
injury is required.
Each hat includes
- Maximum impact and side protection.
- Terylene cradle with highly absorbent
premium Hydro-Flock replaceable
sweatband.
- Optional unique ventilation system
which offers improved airflow.
- Internal card holder for ID/Med card
credit card size 54x85mm
Full Peak
Bump Caps
Bump caps do not offer sufficient protection from falling
objects, and as such must never be used where the
above residual risks remain.
Shelf Life
In order to comply with the necessary European
Standards (see Below),all safety helmets are stamped
with either the quarter or month, and the year that they
were manufactured.
If the helmets are stored in the boxed they were
delivered in and not exposed to extremes of
environment, then the shelf life of the helmet is not
limited. What is important to remember, however, is
that manufacturers recommend that the helmet must
not be in use 5 years after the date of manufacture.
Care and Maintenance
If required, a helmet may be cleaned with soap and
water and dried with a soft cloth. Never use abrasive
substances or solvents, and never store a helmet in
direct sunlight, or where it may come.
Into contact with chemicals
Operatives that wear safety helmets should inspect
them regularly, and if the shell has anything more than
superficial abrasions or scuffing, it must be replaced
with a new one.
Centurion Reflex Hard Hat
Designed with safety and comfort in mind,
this helmet comes with a 6 point
Nylon Textile cradle and Brushed Nylon
sweatband and ventilation as standard.
European Standards
The helmets are approved to EN:397, which covers
its performance standard for the following items:
- Shock absorption
- Resistance to penetration
- Flame retardant
- Chinstrap anchorage
Accessories:
The Concept and Reflex is compatible with all CONNECT accessories:
Spare Sweatband
Fleece Helmet Liner
Elasticated Chinstrap
RetractaSpec
European Standard Markings
440v a.c. and 1000v a.c.
The helmet will protect against short term, accidental
contact with live electrical conductors up to this voltage.
LD (Lateral Deformation)
The helmet will afford a modicum of protection from
lateral compressive loads.
06SWEATBANDCONC
06UNIVERSALLINER
Hydro-Flock with 4mm foam
(S31F)
Black Universal fleece liner.
(S50FLSP)
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
06CHINSTRAPCENT
06S579RETRACSH
- Elasticated 2 point Chinstrap
with chincup (S30E)
- Retractable Eye Shield (S579)
(low energy impact)
Association of
Interior Specialists
MM (Molten Metal)
The helmet will offer a degree of protection against
molten metal.
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Personal Protection Equipment
Hearing protection
HEARING PROTECION
Technical Specifications / Requirements
uvex com4-fit - Disposable ear plug
06EARPLUG
The ‘X’ emboss in the end of the plug makes it
easy to remove while simultaneously reducing
the pressure in the wall part of the ear canal.
With its more compact ergonomic design, the
uvex com4-fit its comfortable for wearers with
narrower auditory canals. The com4-fit has a
sealed surface, preventing foreign bodies from penetrating
the plug. The soft foam offers real comfort, even when worn
for extended period. Can also be used in quieter environments.
Supplied packed in pairs as standard or in dispenser
06EARPLUGDISPREF
The Control of Noise at Work Regulations 2005 requires
that any persons working in noise levels between 80dBA
(the lower Action Level) and 85dBA (the Higher Action
Level) MUST be provided with suitable hearing protection,
on request. Where noise levels are in excess of 85dBA
(the Higher Action Level) the employer MUST provide
hearing protection and the employee MUST wear it.
The noise exposure limit value means that employees
MUST NOT be exposed to more than 87dBA, averaged
over an 8 hour period/shift.
Ear Defenders:
Are a traditional method of ear protection, Today's range
of 'defenders' cope with a very wide spectrum of industrial
noise hazards. It is important to study the attenuation
characteristics of each model, as they do vary in
performance across a range of sound frequencies.
Helmet Mounted Ear Defenders:
Afford head and ear protection in one. Today's models are
styled to be sensibly 'parked' out of the way at the side of
the helmet, when not in use.
refill packs for use in the
06EARPLUGDISP
wall mounted one click ear plug dispensers.
Communication Head Sets
Ear defenders that incorporate communication systems
are available for people working over large areas within a
noisy environment.
Plugs:
Can be worn conveniently with all other PPE items. They
are easy to use, with attenuation, which often exceeds
that of ear defenders; although disposable, they provide a
good degree of protection, if worn correctly.
Flex and Corded Plugs
Flexi versions are favoured for carrying around the neck
when the hearing protection is not in use. Most plugs are
also available in a corded version.
Electronic Hearing Protection:
Is the latest in sound technology – hearing protectors
which amplify weak sounds whilst attenuating loud noises.
Standard Noise Reduction (SNR)
SNR is only a general means of comparing different
hearing protection. Generally, the higher the SNR number,
the better the performance of ear protection across a
range of noise frequencies. For example: a SNR of 30 may
not give a 30 decibel attenuation at all frequencies.
The figures associated with H, M and L indicate the level
of protection within the range of High, Medium, or
Low frequency noise. Examples for the wearer of ear
defenders where H=35, a high frequency noise of 100
decibels will drop to 65 decibels. Wearing the same ear
defenders, where M=25, a medium frequency noise of
100 decibels will drop to 75 decibels.
Centurion Baltic Helmet mounted
Ear Defenders
06EARDEF541
Lightweight clip on ear defenders
providing general purpose hearing
protection, including 360 movement
with lockout facility for ease of
communication.
Suitable for most requirements.
Spare hygiene kit available - S44.
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
European Standards
Ear defenders and plugs are tested to the relevant
European Standards, and are CE marked, as follows:
EN:352 Part 1 Ear defenders / EN:352 Part 2 Ear plugs
EN:352 Part 3 Helmet mounted ear defenders
EN:352 Part 4 Level dependent ear defenders
EN:352 Part 5 Active noise reduction ear defenders
EN:352 Part 6 Ear defenders with electrical audio input}
EN:352 Part 7 Level dependent ear plugs
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Personal Protection Equipment
Respiratory Protection
Fold Flat dust Mask FFP2 - Non-Valved or Valved.
Protects against fine hazardous dust particles
and light welding fumes
RESPIRATORY PROTECTION
Technical Specifications / Requirements
06MASKP2V
06MASKBBP1
Fold Flat disposable dust Mask
FFP3 - Valved
Provides very low breathing resistance
due to the increased filtration area.
Polypropylene (P.P) outer layer provides
smooth lining and avoids loose fibers.
Adjustable head strap ensures the best
facial seal with minimum leakage.
Contour design ensures the compatibility
of glasses / goggles and reduces fogging.
Full facial close-cell foam and adjustable
nosepiece ensure custom shape and
increase the worker comfort.
Protection level FFP3 with exhalation valve.
EN149:2001
Fold Flat Dust Masks
Many types of masks and respirators seem similar, but there
are significant differences in the use of materials, design
technology and protection levels. Make sure you always use
an approved respirator to protect your health.
06MASK5P3
Moldex Series 7000 Disposable half mask.
Extremely Lightweight, easy to clean with easily accessible components.
Made from hypoallergenic thermoplastic material, so is kind to skin and comfortable.
100% PVC-Free. Easylock filter system, so no extra parts required.
Respirators tested to EN140:1998 and fulfil all requirements as relevant.
06MOLDEX7000S
Selecting a Respirator
Workplace conditions, such as temperature, humidity and
work rate, can affect wearer comfort; so it is important to be
aware of the different respirator features that are available.
A respirator must allow you the freedom to communicate
easily with colleagues, and fit well with the rest of your safety
equipment and achieving a good face- fit is essential to the
level of protection afforded; a leaking respirator may feel
comfortable, but it is not much better than using no respirator
at all. Always select a respirator that meets the European
Standard, CE Marked, and offers you the right level of comfort
and protection; most importantly, ensure it is fitted correctly.
06930FILTER
Fold Flat v’s Half Mask
Disposable respirators are typically white face masks with
two straps, and often have an exhalation valve for improved
comfort. They are also printed with 'EN: 149:2001', the CE
mark, and they are designed to provide effective protection
against fine respirable dusts, mists and metal fumes.
Nuisance Dust Masks and Gauze Pads do not meet the
European Standard for respirators (EN:149:2001), and are
not CE Marked; they do not have any of this important
information printed on the mask. They do not provide
protection against fine lung damaging dusts, and so cannot
be used as Personal Protective Equipment.
Fit Testing
Checking that a respirator provides an adequate seal to the
wearer's face has long been considered best practice, as
part of a general Respiratory Protective Equipment (RPE)
programme. Fit testing is a mandatory industry wide
requirement under the UK Asbestos Regulations, the Control
of Substances Hazardous to Health Regulations (COSHH),
and the supporting Approved Codes of Practice (ACoP),
Respirators with tight fitting facepieces include disposable
respirators, half masks and full face masks.
Fit testing should be carried out:
- On all wearers of RPE with tight fitting facepieces where
fit testing has previously not been performed.
- During initial selection of RPE
Fit testing should be repeated at appropriate times such as;
- if the RPE wearer significantly loses or gains weight
- has major dental work
- sustains a major facial injury
- if a different size or model of RPE is specified
- if specified by the company policy e.g. repeated with
annual health surveillance check.
Eurotec employ trained Fit Testers that can visit site.
Two main methods of fit testing are available:
Qualitative fit testing
Qualitative fit tests provide a 'pass or fail' result, based on
the wearer detecting a test agent. They provide a subjective
measure of the quality of the seal of the facepiece to the wearer's
face and may be carried out by a suitably trained tester.
Quantitative fit testing
Quantitative fit tests give an objective measure of the seal
between the wearer's face and the facepiece; a fit factor
number is produced. These tests will normally be carried out
by a consultant. For more information or advise contact your
Health and Safety Adviser.
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Personal Protection Equipment
Eye Protection
UVEX Ultrasonic Goggle
This goggle has a modern design,
with an all round vision.
Pressure free fit, multi hard/soft
frame, supravision lens coating.
This creates a non mist, scratch
resistant lens.
- Less than 80 grams in weight
- Easy lens replacement.
Available in a rang of colours.
Approved to EN166 1 B 3.4.9 KN
O6ULTRASONIC
Standard Safety Goggle
Anti-mist safety goggle.
Polycarbonate lens.
Direct vent.
Soft pvc frame.
Fits over most prescription glasses.
Adjustable strap.
EN166 - 4 9 BT
ANSI - Z87
EYE & FACE PROTECTION BS En166
Technical Specifications / Requirements
Choosing Safety Eyewear
When choosing the safety eyewear which is best
suited to day-to-day and task specific requirements,
the following information will be useful: the eyewear
should be marked with a standard code (BSEN:166);
each number represents a test which the product
has been subjected to. Every effort must always be
made to remove the hazards identified, at source,
as the result of a Workplace Risk Assessment;
however, where safety eyewear and task specific
eyewear (e.g. goggles) are necessary, the following
items should be considered:
- Type of hazard
- Type of protection
- Type of Lens
Types of Eye Hazard
Hazards fall into 4 main categories:
Mechanical – Flying debris, dust or molten metal.
Chemical – Fumes, gases or liquid splash.
Radiation – Heat (Infrared), Ultraviolet light or glare.
06SAFETYGOG
Warrior Wraparound Specs
Wraparound sports style frame with
adjustable ratcheting side arms to give
an optimum fit. Hard coated
polycarbonate lens, complete with
adjustable neck cord. Conforms to
EN166.1.F.
Laser Light – Over a wide spectrum of wavelengths
from Ultraviolet to Infrared.
Type of Protection
Safety Spectacles – Safety spectacles are intended
to protect against low energy impact from flying
debris and objects. They will not keep out
concentrations of dust or airborne particles.
Or protect against gas or molten metal.
Safety Goggles – safety goggles will offer protection
against medium energy impact and high levels of
explosive force. They must be used to protect against
dust, airborne particles and gas
Safety Faceshields – a full face visor offers a wide
area of protection against flying particles and
chemical splash. They also remain mist free through
rapid temperature changes.
06SAFETYSPECS
JSP Martcare® M9300 Overspec™
Spectacle Clear Lens HC
Extended impact protection spectacles,
deeper box style extended wraparound
ingle polycarbonate lens and temples.
Suitable for use over prescription
(Rx) eyewear. Conforms to EN166.1.F
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Type/Colour of Lenses
Clear - Suitable for general use.
Grey Anti - Glare - Suitable for use in high glare
Situations such as finished concrete slabs in bright
sunlight.
Yellow/Amber – Suitable for persons moving from
light to dark environments.
06MARTCARE
Association of
Interior Specialists
Care and Maintenance
Both the employee and employer have a
responsibility to keep all eye protection in good order.
User instructions are provided and give cleaning and
maintenance information. The employer should
ensure that products are available to help keep
eyewear in optimum condition.
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Personal Protection Equipment
Eye Protection
UVEX X-ACT
Lightweight and frameless safety spectacle
Adjustable side pieces for best individual fit
Bi-spherical lens, with integrated side for
wearer safety
Unrestricted vision in all directions
DIN En166 & DIN EN 017
Clear THS anti-mist, scratch resistant
Amber/Brown Ultradura scratch resistant both sides
Clear
Amber
Brown
06X-ACTCLEAR
06X-ACTAMBER
06X-ACTBROWN
UVEX Super G
State of the art thin lens that are angled
perfectly to ensure excellent ventilation
to keep eyes comfortable.
The frame, made from ultra light polymers
gives maximum flexibility possible.
- Non-slip fit.
- Completely metal free, only 18 grams.
- Available in a rang of colours.
Silver Mirror
Supervision
06UVEXSUPGSIL
06UVEXSUPGSPEC
UVEX I-VO
Safety eyewear revolution. Excellent
comfort due to duo-component
technology. - Duo spherical lens.
Straight arm fits behind the head,
not the ear. Available with headband
instead of arms. Lens colour optional.
Approved to EN166 1F CE
Clear THS anti-mist, scratch resistant
Amber/Brown Ultradura scratch resistant both sides
Clear 06IVOCLEAR
Amber 06IVOAMBER
Brown 06IVOBROWN
Blue Ice 06X-TWINICE
Amber 06X-ONEAMBER
Grey 06X-ONEGREY
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
UVEX X-Range
Lightweight and comfortable design
Sporty wrap-around style
Duo-spherical lens provides
excellent all-round vision
Maximum UV Protection
Highest optical quality lens - Class 1
Approved to En166 1F CE
Amber and Grey c/w hangcords
Clear THS anti-mist, scratch resistant
Amber
Ultradura scratch resistant both sides
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Personal Protection Equipment
Eye Protection
Bollé Bandido
An economically designed model made
entirely of highly resistant, polycarbonate.
Bandido eye shields have inbuilt side protection
and allow an excellent panoramic view, thereby
guaranteeing a very pleasing price/quality
ratio, with an anti-scratch and anti-fog coating.
Available in:
Tinted
Clear
Smoke
Bollé Silium
The Silium features a sports
style frame with rubber tipped,
self adjusting spring temples
and soft adjustable nose pads.
- Polycarbonate wrap lens
- Anti Scratch
- Anti Mist
- Grade F Impact
- 100% UV Protection
Available in:
Tinted
Clear
Smoke
Bollé Rush
The all-round vision,
lightweight Bollé Rush
offers perfect optical
quality, maximum comfort
and a stylish modern
design. The Rush also
features an adjustable
non-slip bridge and
non-slip temples to avoid
movement whilst working.
Available in:
Tinted
Smoke
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Clear
An exclusive and revolutionary
HD lens coating for the best in clarity
and light transmission.
The visible light transmission rate is
at 96%, compared with the 92% of
other conventional lenses.
Featuring a hydrophobic coating as
standard, HD is a barrier against
water and dirty marks.
- 96% visible light transmission
significantly improves perception and
clarity.
- Eliminates “surface reflection” whilst
still providing 99.99% UV and
impact protection.
- Greater visual comfort for longer
periods of use.
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Personal Protection Equipment
Accessories
Centurion General
Purpose Face Protection
Select either a Polycarbonate
or Acetate Face Screen
and connect to the
S54 Face Screen Carrier.
06S54CARRSH
06S580FACESH
European Standards
Frame
Optical Class
Accessories
06SPECBAG
06NECKCORD
uvex neck cord
uvex 9959.002
Neck hang cord for all uvex spectacles
Uvex Cleaning Station
Plastic uvex cleaning station for wall
mounting. It enables employees to
improve their own safety with a clear
field of vision as well as make their
protective glasses last that much longer
bymeans of a regular, simple and
uncomplicated cleaning process.
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
uvex nylon bag
uvex 9954.355 - microfibre case
with cord, suitable for all spectacles.
uvex 9954.360 - suitable for all
goggles and cover glasses.
Lens
Continuous Work
1
Intermittent work
2
Occasional Work
3
Increased robustness
(general purpose)
S
S
Low Energy Impact
(45m/sec)
F
F
Medium Energy Impact
(120m/sec)
B
B
High Energy Impact
(190m/sec)
A
A
Performance at Extremes
of Temperature
T
T
Liquid Droplets
3
Large Dust Particles
4
Gas/Fine Dust Particles
5
Short Circuit/ Electric Arc
8
Molten Metals and
Hot Solids
9
9
Resistance to Fogging
(Anti Mist)
N
Resistance to Surface
Damage (Anti-Scratch)
K
08UVEXSTATION
08UVEXPUMP
08UVEXSOLUTION
08UVEXTISSUE500
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Personal Protection Equipment
Gloves
HAND PROTECTION
Technical Specifications / Requirements
Skytec Ninja Flex - (3131)
Latex lightweight palm coating
Excellent wet and dry grip
Exceptional flexibility
and tactile touch
Elasticated wrist
European Standards (ENs)
General Requirements – EN:420 Basic Protection
Offering basic protection for general usage. Most types of
protective glove conform to this standard, which requires it
to be adequate in the following areas:
- design and construction
- fitness for purpose
- comfort and efficiency
- sizing
- innocuousness
Skytec Cirrus - Cut Resist (4343)
High performance polythene liner
Polyurethane-coated palm
Flexible and light weight
Breathable back of hand
Elasticated cuffs
Showa 377 Nitrile Foam Grip (4121)
Fully coated nitrile liner with
a nitrile foam palm. Ideal for
wet and oily environments,
protects against the ingress
of liquids without compromising
on mobility and grip.
Ideal for precision tasks.
SHOWA Palm Plus 541 (4342)
Grey polyurethane-coated palm.
These gloves are designed for
precision tasks where mechanical
hazards are present.
HPPE, a fine and supple fibre made
from ultra-high-density polyethylene.
9001
14001
18001
50001
Accredited
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Mechanical Hazards – EN:388 Intermediate Protection
Products marked with this symbol comply with EN:388.
The numbers under the symbol represents the performance
level which is the level of resistance against:
- abrasion (performance index 1-4)
- blade cut (performance index 1-5)
- tears (performance index 1-4)
- punctures (performance index 1-4)
(Note: 1 is the lowest performance rating)
Cold Hazards – EN:511 Intermediate Protection
This symbol indicates that the product has been tested and
approved under EN:511 for appropriate protection against:
- connective cold
- contact cold
- permeability of water
Microbiological Hazards – EN:374-2 Advance protection
EN:374-2 requires a product to be resistant to penetration
by micro-organisms. Referred to as Acceptable Quality
Level (AQL).
Chemical Hazards – EN:374-3 Advanced Protection
Gloves approved to EN: 374-3 offer resistance to chemical
splashed and immersion. There are many chemicals in
use in the industry today. To ensure protection against
specific products or strengths, further information is
available by calling your local parker Merchanting depot or
Health and Safety Department.
Showa 380 Foam Grip (3121)
Seamless nylon liner with a nitrile
coated foam palm. Absorption capacity
up to 4 times longer than many standard
foam nitrile gloves. The seamless nylon
liner and anatomical shape reduces
hand fatigue through enhanced
flexibility and breathability.
FS 37588
This range of hand protection products has been complied
to provide protection against the following hazards:
- Mechanical
- Cold
- Thermal
- Chemical
The hand protection detailed covers a variety of types for
various site hazards, to help ensure safe working. Each
glove or gauntlet has been designed and manufactured to
provide high quality tolerances to the above hazards.
Association of
Interior Specialists
Thermal Hazards – EN:407 EN: 12477:2001
TYPE A Mechanical properties Advanced Protection
This standard specifies thermal performance for protective
gloves against heat and/or fire. EN: 374 Cat 2 approved
hand protection is not suitable to be used with chemicals
which pose a risk of mortal danger or a danger that may
seriously and irreversibly harm health. EN: 374 Cat 3
approved hand protection should be selected in accordance
with a risk assessment in these circumstances.
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Personal Protection Equipment
Gloves
Uvex 3 Digit Glove (4343)
These safety gloves are flexible
& provide outstanding dexterity.
Dyneema fibre material has
exceptional resistance to cuts,
abrasion and mechanical strength.
The palms and fingertips coated in PU.
Conforms to EN388 / 4343.
05UVEX3DIGIT8
05UVEX3DIGIT9
05UVEX3DIGIT10
Palm Fit gloves (4121)
Knitted lightweight
polyamide
Excellent dexterity.
Grip gloves (2142)
Polycotton Shell
Latex Coating
General purpose
resistant to abrasion
Criss Cross gloves (114X)
Knitted liner
General Handling
not puncture resistant
PVC Knitwrist gloves (4121)
Fully PVC Coated & Knitted
For general handling
Dry Grip / Flexible
05KRISSCROSS
05PVCKNITWRIST
Standard Rigger
Split leather glove
suitable for
heavier handling
environments
Powdered or
Powder free
Latex Gloves
Medical or Industrial
Grade available
05RIGGERSTD
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Personal Protection Equipment
Gloves
TORO - PU Palm
Cut Level 1
FEATURES
• Ideal for precision tasks requiring dexterity and flexibility
• Comfortable with anatomical shaped fi t, allowing excellent
freedom
of movement and reduction of hand fatigue
• Abrasion and tear resistant, with a secure grip
• Ideal for detailed assembly, light fabrication and small parts handling
DESCRIPTION
• Seamless nylon liner with Polyurethane coated palm
• Breathable back of hand designed to reduce perspiration and skin irritation
• Lint free, reducing the risk of product contamination
• Elasticated wrist provides a secure fit
• Red Colour
BETA 1 RED - Nitrile Foam Palm
Cut Level 1
FEATURES
• One of the lightest gloves in industry for maximum comfort
• NFT nitrile foam coating enhances protection as well as providing
good wet
grip by channelling away excess fluid from the glove surface
• Excellent resistance to abrasion
• Excellent dexterity
DESCRIPTION
• Machine knitted liner made from Nylon/Spandex which gives good fit and
sensitivity, superior comfort and dexterity
• 18gg extrememly lightweight seamless liner glove with solid knit wrist
• Red and black colouring
TONS RED - Latex Palm Coating
Cut Level 1
FEATURES
• Polyester/Cotton knit liner
• A flexible, robust glove offering great dexterity with good
• Breathable back of hand to reduce perspiration
• Designed for easy movement and continuous wear
resistance to tearing
DESCRIPTION
• Rough finish to ensure a secure grip
• Elasticated cuff
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Personal Protection Equipment
Gloves
DIGIT 3 - Cut Level 3, Polyurethane Palm, 3 Fingers Exposed
Cut Level 3
FEATURES
• 3 open finger design
• Level 3 cut resistance
• Machine knitted liner constructed
using HPPE fibres blended with other
synthetic yarns
• Flexible polyurethane palm
• Elasticated wrist for secure comfortable fit
DESCRIPTION
• Enables precise handling in applications necessitating open fingertip contact
• Ideal for dry working conditions
• Liner provides high levels of resistance to abrasion and tears
• Excellent dexterity and comfort
• Amber colours for enhanced visibility
G 3 PU - Cut Level 3, Polyurethane Palm
Cut Level 3
FEATURES
• Level 3 cut resistance
• Machine knitted liner constructed
using HPPE fibres blended with other
synthetic yarns
• Flexible polyurethane (PU) palm
• Ventilated to keep hands cool
• Elasticated wrist for a secure comfortable fit
DESCRIPTION
• Ideal for dry working conditions
• Enables precise handling of small components
• High levels of resistance to abrasion and tears
• Excellent dexterity and comfort
• Amber colours for enhanced visibility
GAMMA 3 AMBER - Cut Level 3 Nitrile Foam Palm
Cut Level 3
FEATURES
• Ventilated liner to keep hand cool and reduce perspiration and skin irritation
• Micro-capillaries draw liquid away from the surface to provide better grin in
all conditions
• Actifresh treated to kill bacteria and promote freshness
• Elasticated wrist provides a secure fit
DESCRIPTION
• Nitrile foam palm coating
• Amber colouring
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Personal Protection Equipment
Gloves
DIGIT 5 - Cut Level 5, Polyurethan Palm, 3 Fingers Exposed
Cut Level 3
FEATURES
• 3 open finger design
• Liner provides highest levels of resistance to abrasions, cuts & tears
• Machine knitted liner constructed using HPPE fibres blended with other
synthetic yarns
• Flexible polyurethane palm
• Elasticated wrist for secure comfortable fit
DESCRIPTION
• Enables precise handling in applications necessitating open fingertip contact
• Excellent cut protection to non-exposed parts of the hand
• Ideal for dry working conditions
• Outstanding dexterity and comfort
• Amber colours for enhanced visibility
T 5 PU - Cut Level 5, Polyurethane Palm
Cut Level 3
FEATURES
• Highest levels of resistance to abrasions, cuts
• Machine knitted liner constructed using HPPE
& tears
fibres blended with other
synthetic yarns
• Flexible polyurethane (PU) palm
• Ventilated to keep hands cool
• Elasticated wrist for a secure comfortable fit
DESCRIPTION
• Ideal for dry working conditions
• Enables precise handling of small components
• High levels of resistance to abrasion and tears
• Green colouring for enhanced visibility
THETA 5 GREEN - Cut Level 5 Coated Palm
Cut Level 3
FEATURES
• Excellent frip in wet, oily or dry conditions
• Anatomically designed for comfort, dexterity
and fit, gloves retain
flexibility despite the high protection level
• Actifresh treated to kill bacteria and promote freshness
DESCRIPTION
• Seamless glass cut resistant liner with an advanced palm coating
• Breathable back of hand to reduce perspiration and skin irritation
• Elasticated wrist provides a secure fit
• Green colouring for enhanced visibility
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
High visibility waist coat c/w logo
Class 2 to EN471
Small - XX Large
High visibility jackets c/w logo
Class 2 to EN471
Small - XX Large
An ‘Extra text’ service is
available from Eurotec.
If you wish to have your Site Name,
Client name or any
important information
about the person wearing PPE,
for example First aider, Firewarden
or Site Manager.
Please contact the Eurotec sales
team for more information.
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
High Visibility
Yellow Bomber Jacket
EN 471 Class 3
Storm collar
Polyester lining
Heavy duty zipper
Phone pocket
Bottom inside hem zip from printing
Heavy duty padding
Optional ID pocket
Sizes: S - 4XL
An ‘Extra text’ service is available from
Eurotec. If you wish to have your Site Name,
Client name or any important information
about the person wearing PPE, for
example First aider, Firewarden or Site
Manager. Please contact the Eurotec sales
team for more information.
Orange Bomber Jacket
EN 471 Class 3 & GO/RT 3279
Storm collar
Polyester lining
Heavy duty zipper
Phone pocket
Bottom inside hem zip from printing
Optional ID pocket
Heavy duty padding
Sizes: S-4XL
An ‘Extra text’ service is available from
Eurotec. If you wish to have your Site Name,
Client name or any important information
about the person wearing PPE, for
example First aider, Firewarden or Site
Manager. Please contact the Eurotec sales
team for more information.
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
High Visibility
High Visibility Bomber
Jacket
This bomber jacket offers you extra protection against
bad weather. With the addition of a storm collar, this
bomber works even harder to keep the wind and rain out.
Conforms to EN 471 Class 3:2
Conforms to En 343 Class 3:1
2 band & brace
Polyester lining
Heavy duty zip fastening
Heavy duty padding
Optional ID pocket
Storm collar
Phone pocket
High Visibility Reversibly
Bodywarmer
This reversible Interactive Bodywarmer has been
specifically designed to work both independently
or in combination with our Breathable Jacket.
It’s quilted lining and great waterproof qualities means
that it’ll keep you warm and dry during your working day.
Conforms to EN471 Class 2:2
Conforms to EN 343 Class 3:1
2 band & brace
Reversible design
300D Oxford fabric with PU coating
Polyester quilted lining
Heavy duty zip fastening
High Visibility Poly Cotton
Cargo Trousers
A more fashionable take on the basic polycotton trouser,
our Hi Vis Combats offer great breathability along with a
selection of additional pockets to enable you to keep all of
your tools close to hand.
Conforms to EN 471 Class 1:2
Polyester/cotton fabric
2 side pockets
2 thigh pockets – box pleat with flaps and velcro fasteners
Back zipped pocket
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
High Visibility
High Visibility Polo
Shirt
Coolviz Polyester 200gsm
Hi-Vis Yellow
Grey Collar
Generous Fit
Split-Hem Design
Strategically Positioned Reflective Tape for Optimal
Wearer Movement
Polyester/PVC High Visibility
Rainsuit
Our two-piece Nylon/PVC Rainwear is manufactured from lightweight
water resistant fabric making them an easy to wear solution for
wet work and foul weather activities.
Lightweight fabric
EN 471 conformant tape
2 band & brace
Elasticated waist on trousers
Heavy duty zipper front on jacket
Front flap pockets on jacket
Hood
Hydraflex Unpadded
Coat
PU Coated Breathable Polyester Knitted Fabric
Reflective Tape Full Configuration
Taped, Stitched and Welded Seams
Heat Stamped at Stress Points
2 Way Zip
Concealed Hood
Studded Storm Flap
Anti Wicking Cuffs & Hem
Pockets - 2 Hip, 1 Inner, Velcro Closing
Conforms to EN471 Class 3 - EN343 Class 3:2
-
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
High Visibility
Hydra Flex
Over Trousers
Hydra-Flex Breathable PU Coated Polyester Knitted Fabric
Reflective Tape 2 Bands around each Leg
Taped, stitched and welded seams
Heat stampled at stress points
Elasticated waistband
Zipped side access with over flap
Stud adjustment at bottoms
Conforms to EN471 Class 1 - EN343 Class 3:2
High Visibility
Trousers
Featuring an elasticated waist, these simple Hi-Vis Trousers are an
essential item for your hi-vis range. Great for working outdoors –
these trousers protect both you and your clothes from the elements.
Conforms to EN 471 Class 1:2 (Yellow versions only)
Conforms to EN 343 (Yellow versions only)
Available with knee or ankle bands
300D fabric
Elasticated waistband
High Visibility
Short Builders Vest
Our Hi Vis Builders Vest features a slightly shorter length than
standard waistcoats meaning it can sit just above a toolbelt,
which is perfect for builders who don’t want to get their tools tangled.
Conforms to EN 471 Class 1
2 band & brace
100% polyester fabric
Velcro fastening
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
High Visibility
High Visibility Underground
Waistcoat
The double-breasted fastening on our Hi Vis Underground
Tracker Vest gives you even better flexibility with the fit,
making it much more comfortable and practical to wear.
Conforms to EN 471 Class 1:2
Conforms to GO/RT 3279
100% polyester tricot fabric
Double breasted stud fastening front
Velcro fastening shoulders and sides
High Visibility Overground
Waistcoat
Our Hi Vis Polyester Long Tracker Waistcoat has been
designed with your safety in mind.
It features quick release seams combined with fantastic
Class 2 hi-vis protection – a fantastic choice for
rail and construction workers alike.
Conforms to EN 471 Class 2:2
Conforms to GO/RT 3279
2 band & brace
100% polyester fabric
Zip fastening
Studs fastening shoulders and sides
High Visibility Pull Apart
Waistcoat
If you work alongside rolling stock or moving vehicles,
then our Hi Vis Pull Apart Vest with quick release velcro
seams is an essential addition to your workwear range.
Conforms to EN 471 Class 2:2
2 band & brace
100% polyester fabric
Velcro fastening
Velcro on shoulders and side
Also available as GO/RT 3279
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
High Visibility
Cutlass Rail Breathable
Bomber Jacket
PU Coated Breathable Polyester
Reflective Tape Full Configuration
Fully Taped Seams
Concealed & Detachable Studded Hood
Heavy Duty 2 Way Zip
Studded Storm Flap
Elasticated Hem
Pockets - 2 Lower with studded Flaps & Side access,
Internal Zipped, Internal Map, Internal Pen, External
& Internal Mobile Phone pockets
Conforms to GO/RT 3279 - EN471 Class 3 - EN343 Class 3:3
Sabre Rail Breathable
Coat
EN471 Class 3
EN343 Class 3:3
GO/RT 3279
300 Denier Waterproof Breathable Fabric
Mesh Lined
Detachable Concealed Hood
High Visibility
Reversible Bodywarmer
This reversible Interactive Bodywarmer has been
specifically designed to work both independently
or in combination with our Breathable Jacket.
It’s quilted lining and great waterproof qualities
means that it’ll keep you warm and dry during
your working day.
Conforms to EN471 Class 2:2
Conforms to GO/RT 3279
Conforms to EN 343 Class 3:1
2 band & brace
Reversible design
300D Oxford fabric with PU coating
Polyester quilted lining
Heavy duty zip fastening
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
High Visibility
Poly Cotton Cargo
Trousers
If you want a trendy hi-vis trouser, then our Hi Vis Combat
Trousers definitely fit the bill. The polycotton fabric gives
great breathability and durability making them fantastic for
a whole host of manual tasks.
Conforms to EN 471 Class 1:2
Conforms to GO/RT 3279
Polyester/cotton fabric
2 side pockets
2 thigh pockets – box pleat with flaps and velcro fasteners
Back zipped pocket
High Visibility
Over Trousers
Our Hi Vis Trousers are perfect for working out-of-doors.
The water resistant material combined with a generous fit
means that these trousers can protect both you and your
clothes from the wind and rain.
Conforms to EN 471 Class 1:2 (Orange version only)
Conforms to GO/RT 3279 (Orange version only)
Conforms to EN 343 (Orange version only)
300D fabric
Elasticated waistband
High Visibility
Coverall
Our Hi Vis Coverall is ideal for full body Class 3 hi-vis protection.
With plenty of room for additional layering, this polycotton
coverall is designed to protect you and your clothes from
the hazards of work.
Conforms to EN 471 Class 3:2
Conforms to GO/RT 3279
Polyester/cotton fabric
Zip fastening
1 zipped breast pocket
2 side pockets
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
High Visibility
High Visibility
Bib & Brace
Our Class 2 Hi Vis Polycotton Bib Trousers benefit from side
pockets and a large chest pocket for you to keep your tools in –
practical and protective alternative to regular polycotton trousers.
Conforms to EN 471 Class 2:2
Conforms to GO/RT 3279
Polyester/cotton fabric
Bib and brace
High Visibility
Cool Polo shirt - 2036CV
Coolviz Polyester 200gsm
Hi-Vis Orange
Grey Collar
Railway Group Standard GO/RT Generous Fit Split-Hem
Design Strategically Positioned Reflective Tape for
Optimal Wearer Movement
High Visibility Long Sleeve
Cool Polo Shirt - 2046CV
Coolviz Polyester 200gsm
Hi-Vis Orange
Grey Collar
Railway Group Standard GO/RT Generous Fit Split-Hem
Design Strategically Positioned Reflective Tape for
Optimal Wearer Movement
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
T-shirt c/w logo
Transfers
Premium Navy T-shirt
205/210GSM
100 Cotton
Reactive Dyed
Crew Neck
Taped Shoulder to Shoulder
Twin Needle Stitching on Neck & Shoulders
Sizes S - 3XL
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Polo-shirt c/w logo
Embroidery
Premium Navy Polo Shirt
250 GSM
50% Polyester 50% Cotton
Reactive Dyed
Knitted Raised Collar & Raised Cuffs
Taped Neck
Taped Side Vents with Extended Back
Washable at 60 Degrees
3 Self Coloured Button Placket
Sizes XS - 4XL
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Sweat-shirt c/w logo
Embroidery
Premium Navy Sweatshirt
350 GSM
50% Polyester 50% Cotton
Reactive Dyed
Set in Sleeve
Lycra Ribbed Cuffs, Welt & Neck
Twin Needle Stitching at Neck, Shoulders,
Armholes and Sleeves
Half Moon at Back Neck
Sizes XS - 4XL
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
Fleece c/w logo
Embroidery only
Premium Navy Fleece Jacket
380GSM
100% Polyester Super Anti-Pill
Micro Fleece
Twin Needle Stitching
Elasticated Cuffs
Full Self Coloured Covered Zip With Zip Puller
2 Self Coloured Covered Zipped Pockets With
Zip Pullers
Elasticated Pull Cords & Toggles
Hanger Loop Inside Neck
Cadet Style Collar
Half Moon Yoke
Sizes XS - 4XL
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk