1. No category

100% Exam Pass And 100% Money Back Ensure
Vendor: Microsoft
Exam Code: 74-409
Exam Name: Server Virtualization with Windows Server
Hyper-V and System Center
Question NO.: 21-40

More than 99,900 Satisfied Customers Worldwide.

Average 99.9% Success Rate.

Free Update to match latest and real exam scenarios.

Instant Download Access! No Setup required.

Questions & Answers are downloadable in PDF format and VCE format.

Multi-Platform capabilities - Windows, Laptop, Mac, Android, iPhone, iPod, iPad.

100% Guaranteed Success or 100% Money Back Guarantee.

Fast, helpful support 24x7.
PassLeader -- 3200+ Exam Brain Dumps With 30,000,000+ Customers’ Trust
http://www.passleader.com/74-409.html
100% Exam Pass And 100% Money Back Ensure
QUESTION 21
You have a Windows Server 2012 R2 with the Hyper-V role installed. The host server hosts a virtual
machine (VM) named NYC-VM. The virtual switches for the host server are configured as follows:
NYC-VM must meet the following requirements:
- Communicate with all of the VMs on the same virtualization host server
- Communicate with the virtualization host server must NOT
- Communicate with VMs on different virtualization host servers
You need to configure the virtual switch for NYC-VM. What should you do?
A.
B.
C.
D.
On NYC-VM, enable virtual LAN identification.
Run the Windows PowerShell command Connect-VMNetworkAdapter -VMName NYC- VM -SwitchName INT.
Connect NYC-VM to the EXT switch.
Run the Windows PowerShell command Connect-VMNetworkAdapter -VMName NYC- VM -SwitchName EXT.
Answer: A
QUESTION 22
A company has a Windows Server 2012 R2 server named NYC-HOST1 that has the Hyper-V role
installed. The host server hosts two virtual machines named SALES1 and SALES2. NYC-HOST1
uses storage spaces with tiered storage. The storage spaces contain both solid state disks (SSDs)
and 10,000 RPM Serial Attached SCSI (SAS) disks for .vhdx files. Each virtual machine runs on its
own .vhdx file.
You plan to add new virtual machines each month. SALES1 and SALES2 must run at the highest
possible performance at all times.
You need to configure the virtual machines.
What should you do?
A.
B.
C.
D.
Add additional SSDs to the storage space that is occupied by SALES1 and SALES2.
Replace the 10,000 RPM SAS disks with 15,000 RPM SAS disks.
Move the .vhdx files from the storage spaces to individual SAS hard disks.
pin the .vhdx files for SALES1 and SALES2 to the fast tier.
Answer: D
QUESTION 23
A company has one Active Directory Domain Services (AD DS) forest that contains two domains.
All servers run Windows Server 2012 R2. The company uses iSCSI storage and Fibre Channel
storage.
You plan to deploy a single Hyper-V failover cluster that uses Cluster Shared Volumes (CSV). The
cluster must include virtual machines from both domains.
You need to ensure that you can deploy a failover cluster.
What should you do?
A. Join each Hyper-V host server to the same AD DS domain.
B. Deploy clustered storage spaces.
C. Deploy Serial Attached SCSI (SAS).
PassLeader -- 3200+ Exam Brain Dumps With 30,000,000+ Customers’ Trust
http://www.passleader.com/74-409.html
100% Exam Pass And 100% Money Back Ensure
D. Join each Hyper-V host server to different AD DS domains.
Answer: A
QUESTION 24
A company has seven Windows Server 2012 R2 virtual machines (VMs). The VMs are running and
are accessible over the network. You plan to copy a large .ISO file from the host server to each of
the VMs.
The copy operations must meet the following requirements: The VMs must remain accessible over
the network during the copy operations. The copy operations must NOT use a network connection.
You need to configure the VMs.
What should you do on each VM?
A.
B.
C.
D.
Enable the Guest services integration service.
Enable the Data Exchange integration service.
Add a network adapter, and then enable the virtual machine queue (VMQ) option on the adapters.
Set the value of the Smart Paging File Location property to %SYSTEMROOT%\temp.
Answer: A
QUESTION 25
Hotspot Question
A company has a Hyper-V environment that includes three servers named HOST1, HOST 2, and
FILESERVER1. HOST1 and HOST2 run Windows Server 2012 R2 that have the Hyper-V role
installed. FILESERVER1 runs Windows Server 2008 R2 and has the File Services role installed.
All of the hardware supports Offloaded Data Transfer (ODX).
The servers are configured as shown in the following diagram:
STORAGE1 is encrypted with BitLocker. You need to support ODX for all of the virtual machines
on HOSTl. Use the drop-down menus to complete each statement based on the information
presented in the screenshot. Each correct selection is worth one point.
PassLeader -- 3200+ Exam Brain Dumps With 30,000,000+ Customers’ Trust
http://www.passleader.com/74-409.html
100% Exam Pass And 100% Money Back Ensure
Answer:
QUESTION 26
You administer a Windows Server 2012 R2 server that has the Hyper-V role installed. The server
hosts three virtual machines (VMs).
One of the VMs is managed by a security engineer. The security engineer must capture traffic on
another VM that is running on the same server.
You need to ensure that the security engineer can access the network traffic information from the
target VM.
Which networking feature should you enable?
A.
B.
C.
D.
port mirroring
NIC teaming
protected network
MAC address spoofing
Answer: A
QUESTION 27
Hotspot Question You plan to implement guest clustering that contains two virtual machines (VMs).
You review the following information from one of the VMs:
The Validate File System test results in the Failover Clustering Validation Report, as shown in the
Validation Report exhibit (Click the Exhibit button.)
PassLeader -- 3200+ Exam Brain Dumps With 30,000,000+ Customers’ Trust
http://www.passleader.com/74-409.html
100% Exam Pass And 100% Money Back Ensure
The Features page of the Add Roles and Features Wizard, as shown in the Features Wizard exhibit
(Click the Exhibit button.)
The disk management settings, as shown in the Disk Management exhibit (Click the Exhibit button.)
You need to ensure that you can implement guest clustering.
PassLeader -- 3200+ Exam Brain Dumps With 30,000,000+ Customers’ Trust
http://www.passleader.com/74-409.html
100% Exam Pass And 100% Money Back Ensure
For each of the following statements, select Yes if the statement is true. Otherwise, select No. Each
correct selection is worth one point.
Answer:
QUESTION 28
A Windows Server 2012 R2 Hyper-V host server has four network adapters that are connected to
two different network switches, server contains a virtual machine named NYC-WEB.
You have the following requirements: increase the available bandwidth for NYC-WEB implement
network fault tolerance for NYC-WEB without modifying network switch configurations use the least
amount of administrative effort
You need to configure the Hyper-V environment. What should you do first?
A.
B.
C.
D.
Enable NIC teaming. Configure the team to use Static Teaming mode.
Enable NIC teaming. Configure the team to use Switch Independent mode.
Enable Bandwidth Management on NYC-WEB.
Run the Windows PowerShell command Set-NetLbfoTeam -Name Team1 - TeamingMode Static.
Answer: B
QUESTION 29
A company has a Windows Server 2012 R2 server that has the Hyper-V role installed. The server
PassLeader -- 3200+ Exam Brain Dumps With 30,000,000+ Customers’ Trust
http://www.passleader.com/74-409.html
100% Exam Pass And 100% Money Back Ensure
hosts 12 virtual machines (VMs) that run Windows Server 2012 R2. The company plans to deploy
System Center 2012 R2 Data Protection Manager (DPM).
The company has identified the following requirements for the DPM deployment:
- Allow files and folders on VMs to be recovered allow recovery of data
to a network
- Share minimize the number of DPM protection agents that you must deploy
You need to implement the backup solution.
Which two actions should you perform? Each correct answer presents part of the solution.
A.
B.
C.
D.
E.
Deploy a DPM server.
Deploy the DPM protection agent to VMs.
Add the Hyper-V role to the DPM server.
Configure DPM to perform guest-level backups of the VMs.
Configure DPM to perform host-level backups of the VMs.
Answer: AC
Explanation:
* DPM protection supports the following scenarios:
/ (this scenario) Protects virtual machines that are hosted on stand-alone servers that run Hyper-V
and that use local or directly attached storage.
/ Protects virtual machines that run on a cluster. The cluster uses Cluster Shared Volumes (CSV)
storage. /Protects virtual machines that run on a stand-alone server or cluster and that use SMB
3.0 file server storage.
/Protects virtual machines that are running during a live migration.
* Example: Protection for virtual machines on a stand-alone server that is running Hyper-V
Hyper-V on Standalone This configuration protects one or more virtual machines on a stand-alone
host computer. Storage can be local on the host server, or directly attached to it, for example a
hard drive, a storage area network (SAN) device, or a network attached storage (NAS) device.
Alternatively, the host server might use SMB 3.0 storage on an alternate file server. The DPM
protection agent must be installed on all hosts and on the file server if storage is hosted by using
SMB 3.0.
Incorrect: Not B: Would not minimize thenumber of Protection Agents.
QUESTION 30
You manage a virtualization environment that contains Windows Server 2012 R2 servers that have
the Hyper-V role installed. You manage the host servers by using Virtual Machine Manager (VMM)
in System Center 2012 R2.
You must monitor the virtualization environment, including all virtual machines and service
instances.
You need to configure monitoring.
Which three actions should you perform? Each correct answer presents part of the solution.
PassLeader -- 3200+ Exam Brain Dumps With 30,000,000+ Customers’ Trust
http://www.passleader.com/74-409.html
100% Exam Pass And 100% Money Back Ensure
A. Import the VMM Management Pack and then deploy agents to the Hyper-V host servers and the VMM server.
On the Hyper-V host server, enable agent proxy for the Operations Manager agent.
B. In the VMM console, add the name of an Operations Manager server to the management group that will
be used to monitor the virtualization infrastructure.
C. On the VMM server, install the Operations Manager console.
D. On the Operations Manager management server, enable Windows Remote Management (WinRM).
E. Import the VMM Management Pack and then deploy agents to Hyper-V host servers and the VMM Server.
On the VMM server, enable agent proxy for the Operations Manager agent.
F. Configure the VMM server and the Active Directory computer accounts of the Hyper-V host servers to allow constrai
delegation.
Answer: ACF
Explanation:
A: Step 2: An Operations Manager agent is a service that is installed on a computer. The agent
collects data, compares sampled data to predefined values, creates alerts, and runs responses.
A management server receives and distributes configurations to agents on monitored computers.
C: (Step 1) The Operations Manager is a requirement. With System Center Operations Manager
2012 SP1, customers can now monitor Hyper-V Replica using a Management Pack available for
free from the catalogue of SCOM.
QUESTION 31
Drag and Drop Question
You have a Windows Server 2012 R2 server that has the Hyper-V role installed. The company has
the following requirements for the Hyper-V host server:
- Virtual machines (VMs) must only communicate with other VMs.
- You must be able to monitor all TCP/IP packets to and from VMs from the
moment that VMs are able to communicate.
- You must support a third-party program that uses the Network Driver
Interface Specification (NDIS) API to monitor the TCP/IP packets between
VMs.
You need to configure the environment.
Which three actions should you perform in sequence? To answer, move the appropriate actions
from the list of actions to the answer area and arrange them in the correct order.
Answer:
PassLeader -- 3200+ Exam Brain Dumps With 30,000,000+ Customers’ Trust
http://www.passleader.com/74-409.html
100% Exam Pass And 100% Money Back Ensure
QUESTION 32
A company plans to create a Hyper-V test environment that will contain three virtual machines
(VMs). The VMs are projected to grow 1 GB in size each day. The VMs will be configured as follows:
You must minimize the required amount of storage space by using the least amount of
administrative effort. You need to recommend a storage solution.
Which type of virtual disk type should you configure for each VM?
A.
B.
C.
D.
differencing
dynamically expanding
fixed
pass-through
Answer: B
QUESTION 33
Drag and Drop Question You administer the following Windows Server 2012 R2 Hyper-V
environment:
The environment also contains a computer named WORKSTATION1 that runs Windows 8.
You need to perform maintenance on SERVER1. You have the following requirements: Perform
live migration for VM-APP1.
Use one of the Hyper-V management tools on WORKSTATION1 to perform the live migration tasks.
You need to migrate VM-APP1.
Which three actions should you perform in sequence? To answer, move the appropriate actions
from the list of actions to the answer area and arrange them in the correct order.
PassLeader -- 3200+ Exam Brain Dumps With 30,000,000+ Customers’ Trust
http://www.passleader.com/74-409.html
100% Exam Pass And 100% Money Back Ensure
Answer:
QUESTION 34
Hotspot Question
You have an environment that contains the servers as shown in the following table:
You purchase a physical server that supports out-of-band management to deploy as a bare-metal
Hyper-V host server.
Administrators must be able to deploy standard Hyper-V host server images to bare-metal
computers by using the least amount of administrative effort.
You need to prepare the environment.
What should you use? To answer, select the appropriate option from each drop-down menu in the
answer area.
PassLeader -- 3200+ Exam Brain Dumps With 30,000,000+ Customers’ Trust
http://www.passleader.com/74-409.html
100% Exam Pass And 100% Money Back Ensure
Answer:
QUESTION 35
You administer two servers that run Windows Server 2012 R2. Both servers are part of a Hyper-V
cluster. The servers are configured as shown in the following diagram:
PassLeader -- 3200+ Exam Brain Dumps With 30,000,000+ Customers’ Trust
http://www.passleader.com/74-409.html
100% Exam Pass And 100% Money Back Ensure
All of the .vhdx files are stored on DISK1. You observe that the physical input/output (I/O)
performance degrades when .vhdx files are accessed. You need to improve performance. Which
two actions should you perform? Each correct answer presents part of the solution.
A. Run the Windows PowerShell command Set-BCCache 10.
B. On each host server, enable write caching for DISK1.
C. Run the Windows PowerShell command
Get-ClusterSharedVolumeBlockCacheSizeInMB = 0.
D. Run the Windows PowerShell command (Get
Cluster).SharedVolumeBlockCacheSizeInMB = 512.
E. Run the Windows PowerShell command Get-ClusterSharedVolume
CsvEnableBlockCache 1.
F. On each host server, disable write caching for DISK0.
"Disk1"
|
Set-
Answer: DE
Explanation:
D: Configuring CSV Cache Windows Server 2012 R2
Open an elevated Windows PowerShell prompt
Define the size of the size of the cache to be reserved (example of setting to 1 GB)
(Get-Cluster). BlockCacheSize = 1024
Note:
* There are two configuration settings that allow you to control CSV Cache.
E: CsvEnableBlockCache This is a private property of the cluster Physical Disk resource. It allows
you to enable CSV Cache on an individual disk. This gives you the flexibility to configure cache for
read intensive VMs running on some disks, while allowing you to disable and prevent random I/O
on other disks from purging the cache. For example parent VHD's with high reads you would enable
caching on Disk1, and high writes for differencing disks the CSV cache could be disabled on Disk2.
PassLeader -- 3200+ Exam Brain Dumps With 30,000,000+ Customers’ Trust
http://www.passleader.com/74-409.html
ClusterParam
100% Exam Pass And 100% Money Back Ensure
The default setting is 0 for disabled, setting to a value of 1 enables CSV Block Cache on that disk.
Note: In Windows Server 2012 R2 this property has been renamed to EnableBlockCache and is
Enabled by default.
D: SharedVolumeBlockCacheSizeInMB This is a cluster common property that allows you to define
how much memory (in megabytes) you wish to reserve for the CSV Cache on each node in the
cluster. If a value of 512 is defined, then 512 MB of system memory will be reserved on each node
in the Failover Cluster. Configuring a value of 0 disables CSV Block Cache. Note: In Windows
Server 2012 R2 this property has been renamed to BlockCacheSize.
The main new features of the VHDX format are: / Support for virtual hard disk storage capacity of
up to 64 TB. / Protection against data corruption during power failures by logging updates to the
VHDX metadata structures. / Improved alignment of the virtual hard disk format to work well on
large sector disks.
QUESTION 36
A company has offices in Hamburg, New York, and San Francisco. The Hamburg office has one
Hyper-V host server named HAM-HOST1. The New York office has two Hyper-V host servers
named NYC-HOST1 and NYC-HOST2. The San Francisco office has one Hyper-V host server
named SFC-HOST1. All Hyper-V host servers run Windows Server 2012 R2.
You must deploy an application virtual machine (VM) that will be used by the sales team at the
company.
You need to ensure that the VM remains available during unplanned system outages.
Which solution should you implement?
A.
B.
C.
D.
a Hyper-V cluster that includes NYC-HOST1 and NYC-HOST2
Server Message Block (SMB) 3.0 file shares on NYC-HOST1, NYC-HOST2, SFC- HOST1, and HAM- HOST1
a Distributed File System (DFS) replication between NYC-HOST1, SFC-HOST1, and HAM-HOST1
dynamic optimization on NYC-HOST1 and NYC-HOST2
Answer: A
QUESTION 37
You administer an environment that uses a Windows Server 2012 R2 Hyper-V cluster and System
Center 2012 R2 Virtual Machine Manager (VMM). You plan to deploy two virtual machines (VMs)
that host a lineof-business (LOS) application.
The VMs must reside on the same Hyper-V host server at all times. The LOB application does NOT
require high availability.
You need to deploy the VMs.
What should you do?
A. Add a custom property to both VMs, and assign the same value to each property.
Configure the Hyper-V host cluster to use the same custom property and value.
Configure a custom placement rule that uses filters that are based on the custom property and value.
B. Configure the VMs to use the same VM network.
C. Configure the VMs to reside on the same storage area networks (SANs).
D. Add a custom property to both VMs, and assign the same value to each property.
Configure the VMs as members of the same availability set.
Answer: A
QUESTION 38
Hotspot Question A company has a Windows Server 2012 R2 Hyper-V environment that includes
two separate Active Directory Domain Services (AD DS) domains. The environment also has three
servers named HOST1, HOST2, and HOST3 that have the Hyper-V role installed. HOST1 and
PassLeader -- 3200+ Exam Brain Dumps With 30,000,000+ Customers’ Trust
http://www.passleader.com/74-409.html
100% Exam Pass And 100% Money Back Ensure
HOST2 are configured as a failover cluster. The environment is configured as shown in the
following diagram:
You plan to deploy two new virtual machines named VM-Server1 and VM-Server2. You have the
following requirements:
- Deploy both virtual machines as a failover cluster.
- Utilize virtual hard disk (VHD) sharing for the cluster. The virtual
machines must survive a host server hardware failure.
You need to deploy the virtual machines.
Use the drop-down menus to complete each statement based on the information presented in the
screenshot. Each correct selection is worth one point.
Answer:
QUESTION 39
Drag and Drop Question
You administer a Windows Server 2012 R2 server that has the Hyper-V role installed. The host
PassLeader -- 3200+ Exam Brain Dumps With 30,000,000+ Customers’ Trust
http://www.passleader.com/74-409.html
100% Exam Pass And 100% Money Back Ensure
server has the following configuration:
You deploy a new lab virtual machine named VM-SERVER3.
You need to ensure that VM-SERVER3 communicates only with VM-SERVER1.
Which three actions should you perform in sequence? To answer, move the appropriate actions
from the list of actions to the answer area and arrange them in the correct order.
Answer:
QUESTION 40
You administer the Hyper-V environment for a large organization. The organization uses Windows
Server 2012 R2 servers that have the Hyper-V role installed and System Center 2012 R2 Virtual
Machine Manager (VMM). You create a virtual machine template that has the Operations Manager
2012 R2 agent pre-installed.
You receive the following Operations console alert for all domain controller VMs that use the VM
template:
The script 'AD Replication Partner Op Master Consistency' Failed to create
object. 'McActiveDir.ActiveDirectory'. This is an unexpected error.
PassLeader -- 3200+ Exam Brain Dumps With 30,000,000+ Customers’ Trust
http://www.passleader.com/74-409.html
100% Exam Pass And 100% Money Back Ensure
The error returned was 'ActiveX component can't create object' (OxlAD)
The Active Directory Management Pack Objects (OOMADs) components are not installed on the
Domain Controller. These components are required for the monitoring scripts to run successfully.
See Alert Knowledge for additional details.
You need to correct the issue for the virtual machines that use the template.
What should you do?
A. Configure the agent to run as a user account that is a member of the Domain Admins security group.
B. In the Administration pane on the Operations console, create a Windows Run As Account containing a
user account that is a member of the Domain Admins security group.
Associate this Run As Account with the AD MP Account Run As Profile.
C. in the Administration pane on the Operations Console, find the affected agent-managed computers and e
nable agent proxy.
D. Install the Active Directory Management Pack helper object on the managed computers.
Answer: D
PassLeader -- 3200+ Exam Brain Dumps With 30,000,000+ Customers’ Trust
http://www.passleader.com/74-409.html