Early Bird Registration Deadline: 8 February 2015 Society of Petroleum Engineers 25–26 March 2015 | Le Meridien Al Khobar | Al Khobar, Saudi Arabia WORKSHOP SPE Workshop: Addressing Middle East Scale Challenges Who Should Attend • • • • • R&D scientists Production chemists Production engineers Reservoir engineers Facilities and manufacturing engineers Committee Members Co-Chairperson Frank Chang Saudi Aramco Co-Chairperson Qiwei Wang Saudi Aramco Ziad Al-Jalal Schlumberger Abdullah Al-Mulhem Weatherford Saleh Al-Mutairi Saudi Arabian Chevron Thibaut Charpentier University of Leeds Chunfang Fan Halliburton Anthony J. Gerbino AQSim Nidal Ghizawi GE Global Research Mohammad Omar Hassan Kuwait Oil Company Charlie Hinrichsen Chevron Stuart Holt AkzoNobel Surface Chemistry Craig Kelly Clariant Oil Services Amit D. Nakhwa OiLSERV Workshop Description Scale deposition is a widespread problem in oilfields, and the industry is continuously searching for ways to manage it. While best practices have been developed in many operations, new challenges are emerging with changes in production conditions and processes. This SPE workshop will focus mainly on the scale management challenges in the Middle East region. Iron sulphide scale, which forms in many Middle East production facilities, will be a key topic for discussion. Scale precipitation encountered during the stimulation process, mediated by acidic H2S and CO2 gases, caused by injection fluids, and the effect of formation water composition will be thoroughly discussed. Reservoirs with severe conditions, such as high temperature/high pressure, high water salinity, and high acidic gas concentrations will be discussed. Case histories from worldwide operations will be reviewed. Emerging technologies and new developments will be presented. The workshop will take multiple formats of case history presentation, panel discussion, open discussion and posters to encourage the active participation of all delegates. It is a great opportunity for oilfield professionals to share experiences and knowledge, and to learn about the current state-of-the-art technologies in scale management. The participants who will benefit from this workshop include R&D scientists, production chemists and engineers, reservoir engineers, and facilities and manufacturing engineers from around the globe. The discussions and presentations will focus on the new developments and best practices related to prediction, formation, prevention, and remediation of various scale deposits in the Middle East oil and gas fields. Qi Qu Solvay Mike Singleton Heriot-Watt University Catherine Strachan REDA Oilfield www.spe.org/go/scale WORKSHOP SPE Workshop: Addressing Middle East Scale Challenges Sponsorship Support Gold Sponsor Sponsorship support helps offset the cost of producing workshops and allows SPE to keep the attendance price within reach of operations-level individuals, those who benefit most from these technical workshops. Sponsors benefit both directly and indirectly by having their names associated with a specific workshop. While SPE prohibits any type of commercialism within the conference hall itself, the society recognises that sponsoring companies offer valuable information to attendees outside the technical sessions. 25 March Coffee Break Sponsor Wednesday, 25 March 2015 0815–0900 hours Welcome Coffee, Collection of Badges and Delegate Packs 0900–0915 hours 0915–0930 hours Seating, Safety Briefing by Hotel, Committee Introduction and Workshop Opening Speech by Workshop Co-Chairs Keynote Speech by Saad Al-Driweesh, General Supervisor, Southern Area Gas Production Engineering Department, Saudi Aramco Sponsorship Categories Please contact SPE to verify the availability of a particular sponsorship. Existing sponsors have the opportunity to renew the same level of sponsorship for annual workshops • Gold Sponsorship • Silver Sponsorship • Bronze Sponsorship • Welcome Reception and Dinner Sponsorship • Speakers Gifts Sponsorship • Lanyards Sponsorship • Badge Sponsorship • Stationery Sponsorship • Luncheon Sponsorship—Per Day • Coffee Break Sponsorship—Per Day • Audio-Visual Equipment Sponsorship Sponsorship Benefits In addition to onsite recognition; SPE will recognise sponsors on the SPE website and in all printed material for the workshop. Based on the sponsorship selected, sponsoring companies also receive logo visibility on promotional workshop items. For More Information For a detailed list of available sponsorships, including benefits and pricing, contact Yousuff Dadapeer, event manager, at [email protected]. SAVE USD 450 BY REGISTERING BEFORE 8 FEBRUARY 2015 0930–1215 hours Session 1: Iron Sulphide Scale Session Co-Chairs: Stuart Holt, AkzoNobel Surface Chemistry Mike Singleton, Heriot-Watt University Iron sulphide scale is one of the most challenging and widespread production issues in the Middle East today, and yet is still one of the least understood and controlled. Scale inhibition with conventional phosphonate and polymeric scale inhibitors, is not widely practiced today, for, partly, economic and, partly, technical reasons. In any case, a full understanding of the methods available to mitigate this type of scale is incomplete, and efforts are ongoing to understand and find satisfactory solutions to overcome this challenge. Treatment options pursued today include mitigation of H2S (biocide/oxidation), sequestration of iron, chemical inhibition, and remedial scale removal. Particular challenges include the complex chemical composition and structure of iron sulphide species, the low relative solubility of some iron sulphide species and their sister scales ZnS and PbS, in water. This session will review the current state-of-the-art in understanding the causes, mechanisms of formation, prevention, and mitigation of scale. We will discuss current field experiences with the aim of developing and sharing best practices. 1215–1330 hours Luncheon and Prayers 1330–1600 hours Session 2: Scale Related to Production Enhancement Session Co-Chairs: Ziad Al-Jalal, Schlumberger; Charlie Hinrichsen, Chevron In the oil and gas industry, production is usually a process that can really be referred to as “oil and gas and water production”. Any system designed for oil and gas production must be equipped to handle the vast quantities of water that are also produced or injected. It is the presence of water that gives rise to numerous problems such as mineral scale deposition. The formation of mineral scale deposits upon tubing, casing, perforations, and even on the formation face itself, can arise from many factors relating to the type of production operation such as sea water injection, steam flooding, stimulation fluids, etc. This can severely constrict fluid flow and thereby curtail the production rate of oil and gas wells. In addition to lost production, a considerable portion of the workover budget is expended in efforts to remove these deposits and prevent their recurrence. Scale can be controlled in two ways—most commonly, by the use of scale inhibitors to reduce the water’s scaling potential and less commonly by pre-treatment of the water, which can include such methods as water softening. The specific approach to preventing scale will naturally depend upon the mechanism by which the scale forms and that in turn will vary with the specific production process in use. This session will begin with several short presentations of case histories that illustrate the range of circumstances and production processes that can lead to scale formation and then describe the various measures used for controlling scale during production. 1600–1615 hours Day 1 Wrap-Up www.spe.org/go/scale General Information Workshop Venue Le Meridien Al Khobar P.O. Box 1266, Al Khobar 31592, Saudi Arabia Tel: +966.3896.9000 | Fax: +966.3896.8893 Web: www.lemeridienalkhobar.com Thursday, 26 March 2015 0815–0900 hours Morning Coffee 0900–0915 hours Day 1 Summary/Introduction of Day 2 by Workshop Co-Chairs 0915–0930 hours Keynote Speech 0930–1200 hours Session 3: Scale Control Strategy, Prevention and Mitigation Session Co-Chairs: Chunfang Fan, Halliburton; Qi Qu, Solvay Oilfield scales have been known to cause problems in oilfield operations and well production. A successful scale management programme often involves a customised approach to address reservoir or operationspecific challenges and extend the longevity of a treatment. The focus of this session will be on practical experiences of scale control and management strategy, prevention and mitigation methods, and current improvements and new approaches in technologies and chemistries. This session intends to encourage the attendees from diverse backgrounds such as operators, service companies, chemical vendors and academic institutions to interactively share experiences, best practices, and novel ideas. Powerful case histories that focus on scale control strategy, prevention and mitigation as well as field engineering design and practices, are highlighted in this session. Attendees will benefit by learning not only from successes but also from failures. In this session, upcoming technologies, emerging chemistries and innovative unconventional methods, and new perspectives for scale control and management, will be introduced and discussed. 1200–1330 hours Luncheon and Prayers 1330–1600 hours Session 4: Scale Risk Assessment Session Co-Chairs: Anthony J. Gerbino, AQSim Nidal Ghizawi, GE Global Research The purpose of this session is to assist attendees in developing a quantitative understanding of mineral scaling risk when using equilibrium thermodynamics as a basis. Evaluating scale risk begins with a water analysis and a scale prediction model. The model output is a saturation ratio and maximum scale amount. Equilibrium thermodynamic models do not consider the effects of nucleation times, precipitation kinetics, mass transfer, flow rates, natural scale inhibitors, and ion concentrations, each of which affects the overall mineral scale. We will discuss the impact of these factors on overall scale risk and create a risk matrix that considers these factors. We will then use the expertise in the group plus available field information to test this matrix. Specific topics to be discussed include Scale Prediction Modelling and Thermodynamic Validation, Laboratory Testing to Quantify Scale Risk in Controlled Environments, and Downhole Monitoring to Quantify Scale Risk in Field Environments. 1600–1615 hours Workshop Summary and Closing Session by Workshop Co-Chairs Workshop Guidelines Format Two (2) days of informal discussions prompted by selected keynote presentations and discussions. Workshops maximise the exchange of ideas among attendees and presenters through brief technical presentations followed by extended Q&A periods. Focused topics attract an informed audience eager to discuss issues critical to advancing both technology and best practices. The majority of the presentations are in the form of case studies, highlighting engineering achievements, and lessons learnt. In order to stimulate frank discussion, no proceedings are published and the press is not invited to attend. Documentation • Proceedings will not be published; therefore, formal papers and handouts are not expected from speakers. • Work in progress, new ideas, and interesting projects are sought. • Professionally-prepared visual-aids are not required; PowerPoint presentations are most commonly used. • Note-taking by participants is encouraged. Poster Session The Steering Committee encourages registrations from professionals who are able to prepare and present a poster on a relevant project. For further details kindly contact Yousuff Dadapeer, event manager, at [email protected]. Breakout Session Attendees may be randomly assigned to discussion groups to maximise the opportunity to interact with other participants. Attendance Registrations will be accepted on a first-come, first-serve basis. The Steering Committee encourages attendance from those who can contribute to the workshop most effectively either in discussions or with posters. A mix of attendees in terms of geographic origin, companies, and disciplines will be encouraged. Workshop Deliverables • The Steering Committee will appoint a “scribe” to record the discussions and to produce the full workshop report for SPE. • This report will be circulated to all attendees as the workshop deliverable within 4–6 weeks following the workshop. The copyright of the report is with SPE. • PowerPoint presentation materials will be posted on a specific SPE URL address after the workshop. Provision of the materials by the speakers will signify their permission for SPE to do so. Commercialism In keeping with workshop objectives and the SPE mission, commercialism in posters or presentations will not be permitted. Company logos must be limited to the title slide and used only to indicate the affiliation of the presenter and others involved in the work. Attendance Certificate All attendees will receive an attendance certificate attesting to their participation in the workshop. This certificate will be provided in exchange for a completed Workshop Questionnaire. Continuing Education Units Attendees of this workshop qualify for SPE Continuing Education Units (CEU) at the rate of 0.1 CEU per hour of the workshop. REGISTRATION FORM SPE Workshop: Addressing Middle East Scale Challenges 25–26 March 2015 | Le Meridien Al Khobar | Al Khobar, Saudi Arabia Important: Attendance is limited and is not guaranteed. Early registration is recommended. Please print or type in black ink. Registration Fee MUST be paid in advance to attend the workshop. FFirst Name/Forename_____________________________________________ Last/Family Name___________________________________________________ SPE Member? ❒ Yes ❒ No Member No.___________________________________ Job Title___________________________________________________ Company/Organisation ________________________________Street or P.O. Box Number __________________________ City___________________________ State/Province___________________________________ Zip/Postal Code___________________________ Country___________________________________ Telephone ____________________ Facsimile ____________________ Email (required) _________________________________________________________ How did you first become aware of this event? ❒ Colleague (word of mouth) ❒ Section or Student Chapter ❒ JPT Ad ❒ Industry Publication ❒ Email from SPE ❒ SPE Website ❒ Other Industry Website ❒ Brochure Recieved by Mail ❒ I am a Committee Member/Presenter ❒ Employer ❒ An Exhibitor ❒ Others (please specify) ______________________________________________________________________________ Workshop Fee: WORKSHOP Before 8 February 2015 After 8 February 2015 ❒ USD 1,150 for SPE Members ❒ USD 1,600 for SPE Members ❒ USD 1,350 for Nonmembers ❒ USD 1,800 for Nonmembers Workshop Fee includes: Technical sessions, materials, daily coffee breaks and luncheons, certificate of Continuing Education Units (CEU), and welcome reception and dinner (if applicable). Accommodation is NOT included in the workshop registration fee. IMPORTANT: All SPE Middle East rates are net of taxes. The fees in this form do not include any local or withholding taxes. All such taxes will be added to the invoice. Do you wish to present a poster? (subject to selection) Do you wish to be considered a Discussion Leader? (subject to selection) ❒ Yes ❒ No ❒Yes ❒No If yes, please indicate which subject you would like to present on: _______________________________________________________________________ Credit Card (Check One): ❒ American Express ❒ MasterCard ❒ Visa NO REFUNDS will be granted for cancellations on or after 18 March 2015. Card Number (will be billed through Society of Petroleum Engineers) Expiration Date (mm/yy) Security Code Name of Credit Card Holder (printed) _________________________________________________________________________________________________ Signature (required)___________________________________________________________________________ Date_______________________________ Please inform us of mobility or special dietary needs_____________________________________________________________________________________ Payment by Bank Transfer: IMPORTANT—For reference: Please quote “15AAKH” and name of delegate Make Payment to: HSBC Bank Middle East Ltd, Jebel Ali Branch, P.O. Box 66, Dubai, UAE Account Name: SPE Middle East DMCC Account Number: 036-217131-100 Swift Code: BBMEAEAD IBAN Code: AE180200000036217131100 Cancellation and Refund Policy: • • • • A processing fee of USD 100 will be charged for cancellations received before the registration deadline of 23 February 2015. For cancellations received after the registration deadline, 23 February 2015, 25% of the fee will be refunded to the registrant. No refund on cancellations received within seven (7) days prior to the workshop date, i.e. on or after 18 March 2015. No refund will be issued if a registrant fails to attend the workshop. Not an SPE Member? Join SPE when you register and save money by paying the lower member registration fee. A portion of your dues is allocated to a JPT subscription and is not deductible or refundable. Visa: SPE Middle East, North Africa, and South Asia will assist in providing a visa invitation letter, upon receiving a written request, to confirmed registrants after receiving full payment of registration fees. Visa invitation letters take five days to issue from the date of request and it is the course attendee’s responsibility to obtain their own visa. SPE cannot issue the visa nor can we guarantee it will be obtained. For questions or additional information contact: Yousuff Dadapeer, event manager, at [email protected]. 15AAKH To submit your registration online, please visit the event website, www.spe.org/go/scale. Alternatively, you can email this form to [email protected], or fax it to +971.4.457.3164.
© Copyright 2024