Multiple HYSWEEP® SURVEY Windows in HYPACK® 2015 By Caryn Zacharias In HYPACK® 2015, HYSWEEP® SURVEY now has the option to open more windows of the same display type. This allows you to view additional systems or to display the same view on different monitors. This added feature is nice, as HYPACK® has the ability to track more than one multibeam system or multibeam(s) and a topographic systems at the same time. The seven (7) displays that can have multiple window are the Profile Window, 3-D Seafloor, Multibeam Waterfall, Intensity Waterfall, Topographic Laser, Shore View and Limits. Opening New Windows Select VIEW – NEW WINDOW and choose the windows to open (Figure 1). FIGURE 1. Adding a New Window in HYSWEEP® HARDWARE. Every new window added will also be added to the menu list. Every window actually open will have a check mark next to it (Figure 2). If you click the red X at the top right of the window to close it, it remains on the list but the check mark will be gone. Selecting the window from the list will reopen the window. You do not need to add a “New Window” again unless you have removed the window from the menu. FIGURE 2. Added Window List To remove windows from the menu list: Select VIEW – REMOVE WINDOWS and choose the window(s) to remove (Figure 3) The remove list only lists the windows that have been added. January / 2015 1 FIGURE 3. Removing Added Windows from the Menu List in HYSWEEP® SURVEY. HOW TO SELECT WHICH SYSTEM TO VIEW Each window has a drop-down list for you to select the system (Figure 4). FIGURE 4. Two Profile Windows Showing Drop-down List to Choose Which System to View. 2
© Copyright 2024