1 Ballerinas, Boots and Roller Skates Crochet Pattern Design by K. Godinez http://amilovesgurumi.com/ 2 Material: crochet hook size 2,5 Catania wool from Schachenmayr in different colors sewing needle, tapestry needle For the Roller-Skates: Cotton swabs or toothpicks 8 beads with a larger hole. Slide cotton swab / toothpick through the hole and check if the hole is big enough. glue Size: The length of the boots, roller skates and ballerinas is 2.5 - 3.0 cm / 0,98 – 1,18 inches and they fit the animals in the Miniami house. Abbreviations: ch - chain st - stitch R - round or row sc – single crochet Number x sc – the number tells you how many times you make a single crochet (or a dc, hdc …) in each stitch inc - make two sc in one stitch dec - two stitches crochet together with a sc dc – double crochet rep - repeat all stitches until end of round sl st - slip stitch BLO – back loops only sc with color change: change the color on this sc (when you make this single crochet stitch, grab the new color of your wool and pull it through the two loops on your hook). Note: Unless indicated otherwise, the parts are worked in rounds. You can start with 2 ch or make a magic ring. The rows should be marked with a thread. Ballerinas (2 x) 2 x ch in desired color R 01 6 x sc in second chain from hook, now mark the rounds with a thread R 02 inc in each stitch R 03 5 x sc, inc, 6 x sc R 04 sc in each stitch http://amilovesgurumi.com/ 6 12 13 13 3 Now start to crochet in rows: R 05 ch, turn, 9 x sc, ch, turn R 06 9 x sc, ch, turn R 07 9 x sc, ch Turn the inside of the shoe to the outside and crochet the two rear sides together with 4 x sl st Cut and sew the thread. Turn the shoe again (the inside to the outside) and start with a different color at the back of the shoe (see picture): 6 x sc, 3 x dc in one stitch, 6 x sc, close the round with a sl st, cut the thread and sew it. 10 10 10 Boots (2 x) 5 x ch in desired color R 01 start in second chain from hook, inc, 2 x sc, 3 x sc in one stitch, turn the piece and continue crocheting on the bottom side of your chain: 3 x sc, mark the round with a thread. 10 R 02 continue crocheting in a circle: 2 x inc, 2 x sc, 3 x inc, 2 x sc, inc 16 R 03 BLO: sc with color change, 6 x sc, 4 x inc, 5 x sc 20 R 04 10 x sc, inc, 2 x sc, inc, 6 x sc 22 R 05 8 x sc, 5 x dec, 4 x sc 17 R 06 6 x sc, 2 x dec, sc, 2 x dec, 2 x sc 13 sl st, cut the thread and sew all the threads From here you start to crochet in rows. Take a different color and count three stitches back from your wool marker (last sc) and start to crochet in the third stitch: R 07 10 x sc, ch, turn R 08 10 x sc, ch, turn R 09 10 x sc, ch, turn Pull the thread through the loop and cut it This is your shoe! Only one thing is missing: the shoe tongue http://amilovesgurumi.com/ 10 10 10 4 Shoe tongue: start in the first stitch from the right side R 01 3 x sc, ch, turn R 02 3 x sc, ch, turn R 03 3 x sc, ch turn Cut the thread and sew all threads Finally, make the laces with the help of a tapestry needle. Roller Skates First, crochet the boots as described above. For the roller skates you need 8 beads with a large hole in the middle and two cotton swabs or toothpicks. Start at the back of the shoe and crochet inside the front loop stitches of R 03: 16 x sl st Cut the cotton swabs or toothpicks for the required length. Hold the swabs to the shoe to find out the right length. (I needed about 3 cm/1,18 inches) http://amilovesgurumi.com/ 5 Slide the shortened cotton swabs through the chain stitches. Put on the outside of your swabs some glue, slide them inside your beads and let them dry. Have fun crocheting! Do not copy or post this pattern without my permission. Don‘t translate this pattern into another language for reselling or publishing on the internet. You can sell a small number of the finished item on markets or local stores. This pattern is copyrighted by Karin Godinez (amilovesgurumi.com). http://amilovesgurumi.com/
© Copyright 2024