SCI — QUICK-START OPERATION INSTRUCTIONS: CRESTRON TPS-6L CONTROL PANEL TURN ON THE MEDIA SYSTEM: • Touch the screen to activate. Select Side or Center Projector • • System warm-up progress bar will appear Projection screen will lower automatically SELECT A SOURCE: • Press either LECTERN or VIDEO tab • • Select a source (Laptop VGA/Sympodium/DVD, etc.) Connect laptop or insert necessary media (DVD/VHS, etc.) NOTE: VGA and HDMI cables are left at the podium each day ADJUST VOLUME/LIGHTING: • Adjust VOLUME level using the volume UP/DOWN arrows • Be sure that MUTE is not highlighted NOTE: Program Volume controls Laptop/VCR/DVD volume. Speech Volume controls the wireless and podium microphone volume. Remember to check volume on your laptop • Room lighting can be controlled via the Lighting button TURN OFF THE SYSTEM AFTER USE: • Press the SYSTEM OFF tab • Press YES to confirm shutdown. System cool-down progress bar will appear • Projection screen will raise automatically. NOTE: During this 3 minute cool down process, system restart cannot occur QUESTIONS OR EQUIPMENT PROBLEMS?: • For immediate assistance, please call CTS at (617) 353-3227 • Send an email to [email protected] to report equipment issues
© Copyright 2024