Performance Series HQA DVRs Quick Installation Guide

Performance Series HQA DVRs Quick Install Guide
Performance Series HQA DVRs
HRHM1041(X)
WARNING
Use only with the supplied power converters. The
Ethernet connection is not intended to be connected to an exposed
(outside plant) network, and must be secured behind a firewall/
router.
1
Unpacking Everything
CAUTION
There is a risk of explosion if the battery is replaced by
an incorrect type. Dispose of used batteries in accordance to local laws.
x2
CAUTION
Installation and servicing should be performed only by
qualified and experienced technicians to conform to all local codes and to
maintain your warranty.
HRHH1081(X), HRHH1083(X), HRHH1161(X), HRHH1163(X), HRHH1166(X),
HRHH2042(X), HRHH2082(X), HRHH2086(X),
x2
OR
Not included with
HRHM1041(X)
Pe
rfo
Regulatory
rm
an
ce
HRH
Se
rie
M10
41(X
)
HRH
H10
s
81(X
HQ
A
),
HRH
HRH H10
H20
83(X
DV
Rs
42(X ),
HRH
),
HRH H11
Than
H20 61(X
tech k
82(X ),
HRH
syst noloyou
),
HRH H11
em gy, for purc
to
your
Follo
H20 63(X
hasi
get
conf w
86(X ),
high Perf ng
HRH
assi iguri the
a Perf
),
definormance
H11
stan ng instr
orm
ition
66(X
ce, any uctio
Befo
Seri
720p es ance
plea cam ns
),
re
Qu
you
se erasin this
/108 HQA Seri
HRH
call
es
begi
Docu ick
,
0p
guid
DVR HQA
HRH M10
the refer
vide
ment Ins
n,
HRH H10 41(X
can DVR
num to e to
plea
o over
800-1 tall
insta
HRH H10 81(X ):
supe .
ber the appr
se
9404 atio
care
ll
HRH H11 83(X ): 720p
your rchaUsin
show
—
opriaand
g
fully
HRH H11 61(X ): 720p , 4-ch
Rev n Gu
exis rge Hon
n belo
log
720p
te
read
A
H11 63(X ): 720p , 8-ch anne
ting your eyw
in
—
ide
, 8-ch anne
w. user to
11/20
HRH
66(X ):
this
coax anal ell’s
l, 1-HD
720p
guid your
14
HRH M20
): 720p , 16-c anne l, 2-HD
guid
infra og HQA
e. DVR
, 16-c hann l,
D
HRH M20 42(X
e and
If you .
strucsecu
, 16-c hann el, 2-HD D Bay,
For
M20 82(X ):
Bay, 1
ture.rity
requ instr
verif
1080
hann el, 2-HD D Bay, 1 TB,
86(X ):
y your
1080
ire uctio
): 1080 p, 4-ch
el, 2-HD D Bay, 3 TB, HQA
Ca
add
p,
2-HD D
TB, HQA Pure
DVR
uti
ition ns on
Bay, 1
p, 8-ch anne
HQA /CVB DVR
D
on
al
mod
8-ch anne l,
Bay, 3 TB,
TB, HQA /CVB S
s an
anne l, 2-HD
el:
6 TB, HQA /CVB S Hyb
2-HD
l, 2-HD D Bay,
rid
d Wa
HQA /CVB S Hybrid DVR
D
Bay, 2
Hyb
D
/CVB S
DVR
Bay, 2 TB,
rni
Hyb rid
TB, HQA
ng
6 TB, HQA /CVB S Hyb rid DVR
s
rid DVR
HQA /CVB S
DVR
/CVB S Hyb
Hyb rid
S Hyb rid DVR
rid DVR
DVR
Insta
tech llatio
nicia n
ns and
to serv
conf icing
orm
shou
to
all ld
loca
FCC Compliance Statement
be
perf
l code
orm
s and ed
only
to
main by
qual
tain
ified
your
and
warr expe
anty
. rienc
ed
Docu
ment
800-1
9404
– Rev
A
– 11/20
14
Quick Installation Guide
Document 800-19404 — Rev A — 12/2014
Thank you for purchasing a Performance Series HQA DVR. Using Honeywell’s HQA
technology, your Performance Series HQA DVR can supercharge your analog security
system to get high definition 720p/1080p video over your existing coax infrastructure.
Follow the instructions in this guide to install and log in to your DVR. For instructions on
configuring any cameras, refer to the appropriate user guide. If you require additional
assistance, please call the number shown below.
Before you begin, please carefully read this guide and verify your DVR model:
HRHM1041(X): 720p, 4-channel, 1-HDD Bay, 1 TB, HQA Pure DVR
HRHH1081(X): 720p, 8-channel, 2-HDD Bay, 1 TB, HQA/CVBS Hybrid DVR
HRHH1083(X): 720p, 8-channel, 2-HDD Bay, 3 TB, HQA/CVBS Hybrid DVR
HRHH1161(X): 720p, 16-channel, 2-HDD Bay, 1 TB, HQA/CVBS Hybrid DVR
HRHH1163(X): 720p, 16-channel, 2-HDD Bay, 3 TB, HQA/CVBS Hybrid DVR
HRHH1166(X): 720p, 16-channel, 2-HDD Bay, 6 TB, HQA/CVBS Hybrid DVR
HRHH2042(X): 1080p, 4-channel, 2-HDD Bay, 2 TB, HQA/CVBS Hybrid DVR
HRHH2082(X): 1080p, 8-channel, 2-HDD Bay, 2 TB, HQA/CVBS Hybrid DVR
HRHH2086(X): 1080p, 8-channel, 2-HDD Bay, 6 TB, HQA/CVBS Hybrid DVR
Information to the User: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
2
Connecting Your DVR
Follow the diagram below to connect your DVR.
Note Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
Manufacturer’s Declaration of Conformance
Cautions and Warnings
North America The equipment supplied with this guide conforms to UL 60950-1 and
CSA C22.2 No. 60950-1.
Europe The manufacturer declares that the equipment supplied is compliant with the
essential protection requirements of the EMC directive 2004/108/EC and the Low Voltage
Directive (LVD) 2006/95/EC, conforming to the requirements of standards EN 55022 for
emissions, EN 50130-4 for immunity, and EN 60950 for electrical equipment safety.
Waste Electrical and Electronic Equipment (WEEE)
Installation and servicing should be performed only by qualified and experienced
technicians to conform to all local codes and to maintain your warranty.
Document 800-19404 – Rev A – 12/2014
Correct Disposal of this Product (applicable in the European Union and other
European countries with separate collection systems). This product should be disposed
of, at the end of its useful life, as per applicable local laws, regulations, and procedures.
Note This system diagram shows the setup for a 16-channel DVR.
Compatible Cameras
HD29HD1(X)
HD73HD1(X)
3
HD30HD1(X)
2.
4
HD30HD2(X)
HD73HD2(X)
HB74HD1(X)
HB75HD1(X)
Configuring the General Settings
1.
Right-click in the Live multiple-channel display, and then choose Main Menu. If
necessary, log into the system using the administrator account (default user name:
admin; default password: 1234).
2.
Click Setting  System  General. The General Settings window appears.
HB74HD2(X)
HB75HD2(X)
Note Only 1080p cameras support the OSD menu.
Logging in to the DVR
1.
Connect the DVR to the monitor, and then connect the USB mouse.
2.
Connect the power cable.
3.
Press the Power button at the front or rear panel, and then boot up the DVR.
6
4.
Indicates Video Loss
Indicates Camera Lock
Right-click the mouse in the Live multiple-channel display to open the Right-click
menu. Left-click Main Menu to open the Login window.
3.
Select a Video Standard (NTSC or PAL).
4.
Click Date&Time to open the Date&Time tab, then enter the date (YYYY MM DD)
and time (HH MM SS) in the correct fields.
5.
Click OK to save these settings.
5
1.
5.
Viewing Recorded Video
1.
Right-click in the main viewing mode, and then choose Search. If necessary, log
into the system using the administrator’s account (default user name: admin;
default password: 1234).
2.
Use the calendar on the right to search for the exact date for playback.
3.
Use the drop-down menus to select the channels you want to play.
4.
Click the playbar at the bottom to select the exact playback time.
After booting up, the DVR is in multiple-channel display, by default. You might see
the following icons:
Indicates the Recording
status
Indicates Motion Detection
Click Enter to open the OSD menu.
Opening the Camera Menu
Right-click in the Live multiple-channel display to open the right-click menu, then
select Camera Menu.
Sign in using a Default account, then click OK.
Username
Password
Profile
admin
1234
Administrator; local; network
default
default
Hidden user
For inside-system use only, and cannot be deleted. When
you do not select a login user, the DVR automatically
chooses this hidden user to log you in. Very limited rights.
WARNING For security, please change your password after your first login and before
you connect the DVR to the internet or to other insecure networks. Do not use the default
password.
© 2014 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed
to be accurate in all respects. However, Honeywell cannot assume responsibility for any consequences resulting from the use thereof. The information contained herein is subject to change without notice.
Revisions or new editions to this publication may be issued to incorporate such changes.
www.honeywell.com/security
+1 800 323 4576 (North America only)
https://www.honeywellsystems.com/ss/techsupp/index.html
Document 800-19404 – Rev A – 12/2014