2248 Main Street, Suite 6 Chula Vista, CA 91911-3932 619 423-5182 TEL 619 423-1363 FAX www.akerleather.com © 2015 Aker International, Inc. On Duty...Off Duty On Duty...Off Duty Ordering Information 800.645.AKER Safety Information In 1981, I had a vision…to produce durable leather products for law enforcement that would stand the test of time for safety and reliability. Now, over 34 years later, AKER leather products can be seen as the first choice for the California Highway Patrol, U.S. Customs and Border Protection; NCIS, FBI Academy, Honolulu PD, U.S. Navy, the U.S. Postal Service, the Los Angeles Police Dept. and the San Francisco Police Dept., to name just a few among the many satisfied customers nationwide and world wide who wear AKER. Our research and development department continually strives to come up with new items in line with the ever-changing technology in the field. But what doesn’t change is the superior quality of the highest grade top grain leather, thread, dyes and hardware which go into our products. Each individual item is hand-made in our factory in the U.S.A. using traditional old-world craftsmanship combined with stringent quality control and painstaking attention to detail. These factors have made AKER a leader in the law enforcement community. In addition to the expertise of our employees, our success would not have been possible without the dedication of our loyal dealers, distributors and both our on duty and off duty customers who have bought AKER leather products these many years. From one man’s vision has come a company dedicated to the law enforcement community, a company whose products are relied upon for their safety and durability and at the same time, have the right look, the right feel, and the right price.......AKER. AKER International cautions against the use of its products by persons untrained or inexperienced in the use of firearms. Careless or negligent usage of any firearm with or without these products may be dangerous and result in injury or death. Products have been inspected prior to shipment by the manufacturer; however, the user/buyer should inspect the product before use. Snaps and fasteners should be inspected regularly to ensure proper security of handgun. Should any AKER leather product become worn, loose, defective, or ill-fitting, cease use immediately. Fingers must be kept clear of the trigger and hammer when inserting or removing a firearm into or from a holster. Always keep safety strap snapped. No holster is completely “snatch proof”. Therefore, the user must exercise extreme diligence at all times in any situation where another person may attempt to take the user’s handgun. We caution against the use of custom, worn, or broken guns, and guns of inferior quality. We also caution against the use of any accessories which might interfere with the proper and safe fit of the gun in the holster, including such accessories as oversize hammers and triggers, trigger shoes, oversize grips, and grip adapters. Any handgun modification may cause improper holster fit and accidental handgun discharge. Do not alter or modify AKER leather products in any way. Order Options Terms of Sale Please be as specific as possible to assure prompt handling of your orders, specify plain or basket weave along with the color and hardware choice. In accordance with the Magnuson-Moss Warranty Act of 1975, all AKER products are sold “as is” and “with all faults”. The entire risk as to the quality and performance is with the buyer. Should any AKER product prove defective following its purchase, the buyer, not the manufacturer, distributor, or retailer, assumes the entire risk of all necessary servicing or repair. The implied warranties of merchantability and fitness for a particular purpose and all other warranties, expressed or implied are excluded from the transaction and shall not apply to the product sold. The determination of the fitness or the suitability of any product for a specific use is the responsibility of the buyer. All prices, terms, conditions, colors, materials, and styles are subject to change without notice. Items will be shipped in plain black with chrome hardware unless otherwise specified. The following is a list of options available: Color: Black or Tan. Finish: Plain or Basket Weave. Hardware: Nickel, brass, or black. Hidden snaps: Optional on many accessories. Lining: Top grain leather or Unlined. Velcro ® Closure: Special order only. *Minimum product orders are indicated by a number in the color choice column(s).* Returns AKER is an approved GSA supplier - GSA Contract GS-07F-8884D. Call or write for complete details. Claims must be made within ten days after receiving product. Call our customer service department at (619) 423-5182 to receive your return authorization number. Merchandise without an RA# will be returned to the sender unopened. Merchandise returned not due to a factory error is subject to a 20% restocking fee. Returns cannot be accepted for items that are discontinued, used, non-stocked, or custom made. Ordering Information Shipping Use the illustrations to determine measurements needed for ordering. All claims for shortages or misshipped merchandise must be reported within 10 days. All shipments are F.O.B. Chula Vista, CA factory. Holsters Belts To ensure that your gun and new holster match exactly for a custom fit, specify make and model of gun, barrel length, and caliber. Please specify your exact waist size and belt width where choice is available. To determine your size from your present belt, measure from the hole you are using to the outer edge of the buckle. For belts sized XS-XXXL, use the following chart: Attention Government Buyers H. Kamuran Aker Chairman of the Board Revolvers: On Duty . . . Off Duty Measure from the face of the cylinder to the end of the barrel. Automatics: Measure from the rear portion of the ejection port to the end of the barrel. All of our holsters are available in left-handed models at no additional charge. Specify LH when ordering. XS = 26”-28” XL = 42”-44” SM = 30”-32” XXL = 46”-48” MED = 34”-36” LG = 38”-40” XXXL = 50”-52” Belts over 48”, XXL, XXXL: add 15% Good leather stretches slightly with prolonged use. Since our leathers are the finest, we’ve allowed for the natural expansion of the holster body by tightening the fit during the molding, bonding, and stitching of our holsters. A secure, safe fit is therefore always assured. Special Thanks To the San Diego District Attorney’s Office and Sheriff’s Department for their assistance in producing the Law Enforcement related photography. Table of Contents 800.645.AKER Off-Duty Holsters 2-3 Flatsider™ Series Holsters 4 Shoulder Holsters 5 Nightguard™ Holsters 6-7 Belt Slide Holsters 8 Paddle Holsters 9 Alternate Carr y Holsters 10 IWB Holsters Belts 11 Off-Duty Belts Accessories 12 D.M.S.™ Accessories 13 Off-Duty Accessories Black Label 14 Black Label™ On-Duty Holsters 16-17 On-Duty Holsters Belts 18 On-Duty Belts Accessories 19 Handcuff Cases 20 Magazine Pouches 21 Mace Cases / Glove Pouches 22 Flashlight Cases / Baton Holders 23 Keepers / Radio Holders 24 Citation Books / Notebook Covers 25 Badge Holders 26 Key Holders / Body Alarm Cases A-TAC 27 A-TAC™ Duty Gear Pro-Bond 28 Pro-Bond™ Series Ordering Information 29 Inside Back Cover 1 FlatSider™ Series Holsters akerleather.com We took the typical pancake belt slide holster and made it our own. Meet the FlatSider™ family of holsters - our most popular holster line due to their unmatched look and feel. By changing the typical molding process, we created a flat side on the back of the holster which lets it ride closer to one’s body than any other holster. From each contour in the molding process, our craftsmen go over every single holster by hand to ensure that every FlatSider™ looks perfect and fits your weapon - and your body - with unequaled comfort. 168 Our version of this popular holster style is molded in fine leather to fit one’s handgun with 100% of the holster pocket formed away from the body. No other holster can boast of this feature. At either side of the holster pocket are curved belt slots that cooperate to provide stability on the belt with unparalleled concealment. The thumb break configuration is backed up by an adjustable tension screw that does double duty as a trigger guard stop. Inside is a full-length molded sight channel and the special dual-plane muzzle is suited to both standard and shortened barrels. Available for popular semi-autos. 168 168A 168A FlatSider™ XR13 All the performance features of the original XR12 in a strapless configuration. Available for popular semi-autos. 2 FlatSider™ XR12 170 170 FlatSider™ XR14 All the performance features of the original XR12, but the XR14 features a quick draw vertical configuration for those who prefer this carry mode. Available for popular semi-autos. 170A 170A FlatSider™ XR15 All the performance features of the XR14 in a strapless design. Available for popular semi-autos. FlatSider™ Series Holsters 800.645.AKER 171 FlatSider Statesman™ XR20 Named for the Bruce Nelson design, this unique addition to the FlatSider family fills a very important niche. The belt loops on each end of the holster wrap solidly around the belt and secure with heavy-duty, one-way snaps. This allows those who favor a slide-on holster the quick-on, quick-off convenience of a paddle rig, by simply snapping it on or off without removing the waistbelt. By featuring the same trigger guard tensioner and precision molding as our other FlatSider holsters, we again offer the user maximum speed and security. The Statesman is sure to become a “must have” concealment holster! Available for popular semi-autos. 171 171A FlatSider Statesman™ XR21 The XR21 has everything the XR20 has, except the thumb break retention strap, for those who prefer an open top holster. Produced for popular semi-autos. 268 268 FlatSider™ Paddle XR17 All the performance features of the XR12 but now with a paddle back for easy removal from the waistband area. The Air-Flo™ paddle incorporates dual retention barbs to hold the holster in position. Available for popular semi-autos. 171A 268A 268A FlatSider™ Paddle XR19 All the performance features of the XR17 in a strapless design. Available for popular semi-autos. Air-Flo™ Paddle Our Air-Flo™ paddle’s ventilation system affords maximum comfort and convenience for paddle retention. Once you try our Air-Flo™ paddle, you’ll never be up a creek without one! 3 Shoulder Holsters akerleather.com 107 FlatSider™ XR7 The FlatSider™ molding worked so well on our dual slot holster, we developed it for a shoulder holster! Using our special method, we molded the holster with 100% of the holster pocket formed away from the body. The twin harness tabs are carefully positioned so the gun grip hangs close to the body, where it is comfortable and concealed - and there’s an adjustable tension screw that doubles as a trigger guard stop. The dual-plane open muzzle accommodates both standard and long barrels and minimizes “printing” through the jacket. It is fitted with our own Comfort-Flex ® double shoulder harness, cut from soft, strong leather and completed with a matching ammo carrier and provision for belt tie-down. Available for popular semi-autos. 107 101 102 Optional handcuff case. 104 Optional magazine side tie-down. 105 Optional holster side tie-down. FlatSider™ XR7 only. 102 104 Comfort-Flex® Our Comfort-Flex ® shoulder system features a specially designed contoured harness that prevents the center piece from riding up and placing the weapon’s weight on the base of the neck. The weight is on the shoulder muscles, preventing the pain that may be experienced from an improperly designed harness. The rear strap attaching point is at the lower edge of the holster which offers a diagonal carry for maximum concealment, even with 5” autos or 4” revolvers. Constructed of premium cowhide and using black hardware, the Comfort-Flex ® system rides more like a vest than a holster. 201 Available for popular revolvers. 101 106 106 4 Comfort-Flex® Vertical Due to many requests, we now offer a vertical holster version of our Comfort-Flex ® shoulder holster, which also features a double mag pouch. The holster is a front break design, with a reinforced finger release tab, which permits a fast, secure draw without the need for belt ties, as jumpsuits and many uniforms do not have a convenient way to tie a holster down. The harness locks in on each side of the neck, keeping the center piece off the bone at the neck base and also minimizes shifting of the holster during use. Offered in black or tan for semi-auto pistols. 105 Nightguard™ Holsters 800.645.AKER 147 Nightguard™ XL Developed with the help of a major police department and tested by agencies around the world, the Nightguard™ XL takes the comfort and concealability of the original Nightguard™ into a pancake style holster. It slides onto belts up to 1-3/4” and creates a low profile by spreading the holster pocket along the curve of one’s hip. The holster mouth is reinforced with polymer and the retention strap is extra wide to prevent interfering with the trigger guard. Constructed from premium cowhide, the Nightguard™ XL rides high and close to the body, providing maximum comfort and concealment. Available for select weapon and light combinations. 147 167 Nightguard™ The Nightguard™ was the first holster to offer a true concealment option for weapons with tactical lights and is the first choice for many federal agencies and off duty officers. Constructed from premium cowhide, the Nightguard™ rides high and close to the body, providing maximum comfort and concealment. It slides onto belts up to 1-3/4” with a rear belt slot and specially designed anchor. The light attachment is fully enclosed to avoid any scratching or wear on the lens. It also features a reinforced opening for additional durability and a tension screw to adjust the tension to your preference. Available for select weapon and light combinations. 167 267 Nightguard™ Paddle All the performance features of the original 167 but with a paddle back for easy removal from the waistband area. The Air-Flo™ paddle incorporates dual retention barbs to hold the holster in position. Available for select weapon and light combinations. 267 5 Belt Slide Holsters akerleather.com 166 Classic 3 Slot What can we say about this holster, except that it has ranked high in popularity among professional gun carriers since Roy Baker cooked up the first one many years ago. Constructed from premium steer hide, the Classic is precisely molded to the individual weapon, and provides uncompromising comfort and concealment. Featuring thumb break retention, the three slot design allows the holster to be worn crossdraw or in the F.B.I. forward rake carry. The holster also features a trigger guard tension screw for extra security. Available for popular semi-autos. 166 166A Classic 3 Slot 166A The open top version of this holster has all of the features of the Classic 3 Slot, except it is a strapless design for those who prefer this carry mode. 166A 136 136 Bodyguard This high riding holster provides stability and protection for the gun. It features a quick-release thumb break and dual belt slots to hold the gun close to the body. Available for popular semi-autos. 137 6 Available for popular revolvers. 136A 136A 137 Bodyguard All the performance features of the thumb break version of the Bodyguard in a strapless configuration for those professionals who prefer this carry mode. Available for popular semi-autos. 137A Available for popular revolvers in a strapless design. Belt Slide Holsters 800.645.AKER 132 White Lightning™ Our very comfortable White Lightning™ belt slide features an open muzzle for accommodating various barrel lengths of the same model sidearm. Using our special process, this holster is molded to the gun for a precise fit, and features twin belt slots for an extremely close and comfortable ride. Available for popular semi-autos. 132A This model is designed for those who favor an open top holster, while retaining all the other features of the original White Lightning™. Available for popular semi-autos. 132 154 White Lightning™ Yaqui Slide The Yaqui Slide is a very compact design that allows a proper firing grip from the holster and permits one-handed reholstering. The holster features two tensioner screws for a perfect fit, and a 1-3/4” belt tunnel, cut out in the rear for placing the holster over a trouser belt loop which prevents the holster from shifting. Available for popular semi-autos. 133 Available for popular revolvers. 178 Hugger XL™ The Hugger XL™ is a very trim and comfortable holster that gives full muzzle coverage with minimum bulk. The rear face of the holster is virtually flat for superior comfort, and the low-cut front allows you to fetch your weapon very quickly. Aker’s precision molding and superior finish make this one of the sleekest holsters you’ll ever own. Available for select weapon models. 121 154 132A 178 Security Special™ The Security Special™ is a high ride level one retention holster, designed for law enforcement and security agencies. The holster features both a 2-1/4” belt tunnel and a pair of 1-3/4” belt slots. Available for most revolvers. 121 7 Paddle Holsters akerleather.com 144 D.A.™ Here’s a popular design that carries the handgun comfortably and concealed - yet it’s easy to remove or attach at the waistband! The D.A.™ is uniquely styled to complement today’s popular handguns. It’s crafted from the finest leather and molded tightly to one’s handgun. Fitted to the holster, the trademark Air-Flo™ paddle incorporates dual retention barbs to hold the holster in position. A thumb break strap built into the holster is backed up by an adjustable tension screw near the trigger guard. Features full length SightStrip™ sight protection inside. Available for popular semi-autos. 144A D.A.™ All the performance features of the standard D.A.™ in a strapless configuration for those who prefer an open top carry. Available for popular semi-autos. 244 144 244A Available for popular revolvers. Available for popular revolvers in a strapless design. 244A Diamond Series™ 175 G.B.F.™ When a major Federal agency wanted a paddle holster with features that no other belt holster had, we had the answer. This Nichols designed paddle is patent pending, with unique features like “The Wedge” and not two but three barbs. The Wedge finally solves that problem of the “other” paddle holsters: the gun grip pressing uncomfortably into your side. How? Together with the molded paddle, it pushes the grip out to a comfortable position. The G.B.F.™ is ideally suited to women and it’s perfect for competition use for everyone, because it provides full grip clearance. No more fistfuls of shirt or blouse! It is molded in fine leather to fit one’s handgun, with a thumb break and an adjustable tension screw for retention. Inside is full SightStrip™ sight protection. Available for most semi-autos. 175A Curve Wedge (pat.pend.) G.B.F.™ Third Barb All the performance features of the standard G.B.F.™ in a strapless configuration for those professionals who have demonstrated need for speed. Available for most semi-autos. Second Barb 175A 8 Alternate Carry Holsters 800.645.AKER 157 Comfort-Flex® Pro Our ankle holster provides un-paralleled comfort and security for “2 nd gun” backup. Constructed of a special low-stretch surgical grade elastic, the gun hugs the ankle closely for maximum concealment, with just enough give for comfort. Thick, genuine sheepskin, not synthetic “cheapskin”, wicks perspiration away from the ankle and prevents slippage. The holster secures to the ankle with a hi-grade hook and loop closure. The version for semi-autos features a metal reinforced thumb break while revolvers use a “pull-through” retention system. 157 155 Pocket Protector Express™ 150 The pocket holster solves the problem of pocket pistol “printing”, without compromising access to the gun, by attaching a wallet shaped flap of genuine leather to the leading edge of the holster. This allows a full firing grip from the leather and assures the holster will stay in the pocket when drawing. Our new ambidextrous design allows right or left hand carry using hook and loop fastener, and the flap can be removed completely for jacket pocket carry or special applications. The holster also assures the gun butt is properly positioned for drawing and protects one’s pocket lining. Don’t leave home without it! Furnished in black, rough-out only. Available for semi-autos and revolvers. Top View 155 140 HideOut Holster™ Designed for unobtrusive carry while wearing body armor, the holster attaches to vest straps and carries like a vertical shoulder rig. Available for select semiautos and revolvers. 150 APNDX This holster is specifically designed to carry a snubby revolver forward of the hip bone on the strong side. This carry style, known as the appendix carry, gives a comfortable and discreet way to carry a small revolver. The holster is retained inside the waistband by a single hook spring clip on the forward edge of the holster. As the butt of the gun is pulled away from the clip and not straight up, the spring clip gives excellent retention with enough flexibility for sitting comfort. When drawing from the APNDX holster, your shoulder does not rise, telegraphing the draw. The APNDX is crafted of premium cowhide with metal hardware. Weapon retention is accomplished by the precise molding of the leather around the weapon. Available in black or tan. 9 IWB Holsters 176 akerleather.com IWB Statesman™ 134 Our most comfortable option for inside-the-waistband concealed carry. The reinforced holster mouth allows for one-handed reholstering. Weapon retention is achieved by our unique molding process. Two belt loops are attached by Chicago screws and securely fasten the holster onto belts with up to 1-3/4” widths with solid brass one-way snaps. Spring Special™ All the performance features of the thumb break version of the Spring Special™ in a strapless configuration for those professionals who prefer an open top carry. Available for popular semi-autos and revolvers. 135 Spring Special™ The Spring Special™ features a quick-release thumb break and a reinforced top band around the holster mouth. This prevents the holster from collapsing and allows one-handed reholstering. Our extra strength “quick-on” spring clip features a hook configuration for maximum retention, which prevents the holster from being drawn with the gun. The Spring Special™ is available in finished suede only. It works great in the summer too! Available for popular semi-autos and revolvers. 135 176 160 134 Spring Special Executive™ The SSE™ features a reinforcing band around the holster mouth which prevents the holster from collapsing in one’s waistband and allows one-handed reholstering. The extra strength “quick-on” spring clip features a hook configuration for positive retention, which prevents the holster from being drawn with the gun. Constructed of the finest cowhide, and featuring thumb break retention, the SSE™ is precisely molded to the individual weapon. Available for popular semi-autos and revolvers. 160A Spring Special Executive™ All of the above features, but with a protective flap of leather extending up between the gun and the body, replacing the thumb break for those who prefer an open top holster. 160 151 D.E.A.™ The D.E.A.™ inside-the-waistband holster is a very comfortable way to conceal your favorite compact weapon. The reinforced holster mouth allows one-handed reholstering. Use of full length SightStrip™ protection insures a clean sight picture. Weapon retention is achieved by our unique molding process and a trigger guard tensioner. The belt loops securely fasten with one-way snaps. Available for popular semi-autos. 251 151 10 Available for popular revolvers. Off-Duty Belts 800.645.AKER A great holster is only as good as the gunbelt that supports it. Our concealment belts are designed for officers who carry weapons everyday and want the look and feel of a designer dress belt, but with the functionality of a traditional gunbelt. Concealed Carry Gunbelt™ Will your belt do this? B21 B21 The 1-1/2” Concealed Carry Gunbelt™ has all the features of a quality dress belt - leather lining, feathered edges, with a solid brass buckle and keeper. Then we add a reinforcing strip of heavy duty polymer to prevent weapon “rollover” or sagging. Finally, a gunbelt that doesn’t look like a gunbelt. It gives you good back support too! B22 B22 Dress Belt Same as the B21 but in a 1-1/4” width. Fancy Stitch Belt B13 B11 B11 Looks dressy, but is constructed from heavy saddle leather and is leather lined to give your gun adequate support. Available in 1-3/4” width. B12 B14 Same features as the B13 but in a 1-1/2” width. Same features as the B11 but in a 1-1/2” width. Ranger Belt Money Belt B09 B09 This popular belt has 3/4” billets and is available in 1-3/4” width. B10 B13 This sturdy leather lined belt features the distinctive “gunfighter” stitching pattern, and is available in 1-3/4” width. B17 B17 Sharply styled with enough strength for concealed carry use, this belt has a hidden difference. The lining is an 18” zippered opening with adequate room for money, hacksaw blade or a spare cuff key. Same as B09 but in a 1-1/2” width. 11 D.M.S.™ Accessories akerleather.com Real estate on your belt is at a premium, that’s why we developed our Dual Mounting Series (D.M.S.™) combo cases. Each D.M.S.™ product comes with a removable paddle that lets you use the belt slot on the back of the case, depending upon which carry option you prefer. No more having to buy two products to hold handcuffs and magazines and no more having to choose between modes of carry. 519 (Paddle Partially Removed) 519 (Side View) 523 (Back View) 519 607 (Side View) 519 D.M.S.™ Combo™ This combo mag and cuff pouch allows one spare magazine and cuffs in an optional quick on/quick off paddle unit. This case also slides onto belts up to 1-3/4”. Specify either right or left hand carry. 519A 523 D.M.S.™ Twin™ Open magazine pouch carries two magazines in an optional quick on/quick off paddle unit. This case also slides onto belts up to 1-3/4”. Same as 519 but made to hold ASP cuffs. 517 619 619 D.M.S.™ Mace/Cuff Case This unit carries a 2 oz. mace can and handcuffs in an optional quick on/quick off paddle unit. Specify either right or left hand carry. 12 523 517 D.M.S.™ Night Fighter™ This magazine and flashlight pouch accommodates one spare magazine and flashlight in an optional quick on/quick off paddle unit. (SureFire 6P/Streamlight Scorpion or Streamlight Stinger). This case also slides onto belts up to 1-3/4”. Specify either right or left hand carry. Off-Duty Accessories 800.645.AKER 503 Bikini Cuff Case Bikini style cuff case clips onto belts up to 1-3/4”. 503A 603 For ASP cuffs. 616 For hinged cuffs. 503 616 Carry Comp™ II This dual magazine carrier uses two retention screws for security, and has two snap-fastening belt loops to allow positioning over the pants belt loop. 513 S.M.P.™ Our latest slide-on magazine pouch, featuring a low cut with dual tensioner screws, allows you to tailor magazine retention the way you want it. The lowered design gives quick indexing and works well with compact mags. Made for most magazines. 514 S.M.P.™ Our single magazine pouch features our extra strength “quick-on” spring clip along with our unique passive retention device to always keep the magazine secure in the pouch and on belts up to 1-3/4”. Available for most magazines. 514A S.M.P.™ Compact Available for most compact magazines. 513 607 607 D.M.S.™ Cuff Case This cuff case with pull-through release snap, features cuffs in an optional quick on/quick off paddle unit. This case also slides onto belts up to 1-3/4”. 514 617 617 D.M.S.™ Mace/Mag Case This pouch keeps a 2 oz. mace can and a single spare magazine in one place. Specify right or left hand. 514A 618 618 D.M.S.™ Light/Cuff Case This case conveniently combines a SureFire 6P/Streamlight Scorpion or Streamlight Stinger flashlight and handcuffs in an optional quick on/quick off paddle unit. Specify either right or left hand carry. 13 akerleather.com BLACK LABEL™ Define your right to carry. ™ Aker Black Label brings together land and sea to create a line of distinctive holsters, belts, and accessories. Inspired by the “surf and turf” lifestyle of our San Diego community and designed to make a statement, Aker Black Label is a r otating line-up of limited edition products, custom-made by the expert craftsmen at Aker Leather. We hold each Aker Black Label product to the highest standards of quality. Our sharkskin is responsibly sourced and our leather comes from the finest vegetable tanned US hides. We dip dye each product by hand and use only solid brass hardware and nylon bonded thread. Why wait? Make your statement today with Aker Black Label. BL-B21 BL-B21 BL-168A BL-168A Concealed Carry Gunbelt™ Crafted from genuine sharkskin and lined with high grade cowhide, this 1-1/2” belt features feathered edges and a custom solid brass buckle and keeper. The secondary feature is a reinforcing strip of heavy duty polymer to prevent weapon “rollover” or sagging. Finally, a distinctive gunbelt to last a lifetime! FlatSider™ XR-13 Developed with the same care and methods of our FlatSider™ series, this holster is crafted from genuine sharkskin and high grade cowhide to last a lifetime. Molded by hand to fit one’s handgun with 100% of the holster pocket formed away from the body. No other holster can boast of this feature. At either side of the holster pocket are curved belt slots that cooperate to provide stability on the belt with unparalleled concealment. 14 BL-616 BL-616 Carry Comp™ II Crafted from genuine sharkskin and high grade cowhide, this dual magazine carrier uses two retention screws for security, and has two snap-fastening belt loops to allow positioning over a pants belt loop. 800.645.AKER Black Label™ Concealment Never Looked So Good.™ On Duty...Off Duty 15 On-Duty Holsters akerleather.com Although many departments are switching to higher level retention holsters or plastic models, nothing can compare with the classic look and feel of a leather duty holster. Made for officers who count on their gear to last, our duty holster models harken back to a different era, when American made quality could be seen in every police department across the country. 118 119 118 Blue Line™ Drop Loop 119 The Blue Line™ was developed to meet the demanding requirements of a major Federal agency. It is now approved by numerous law enforcement departments, and is the current issue holster of the California Highway Patrol. This holster is made of premium suede-lined cowhide and features a heavy-duty leather overlay that reinforces the holster at key points. A thumb break retention strap, backed up with an adjustable tension screw at the trigger guard, allows one to choose the retention level desired. Inside is full-length SightStrip™ patented sight protection. The Blue Line™ attaches to a 2-1/4” duty belt with a steel-reinforced, leather drop-loop hanger. Offered for popular duty pistols. Blue Line™ High Ride Loop All the performance features of the original Blue Line™ holster, fitted here with a high ride belt loop. This belt loop features its own adjustable tension screws to limit movement of the holster along wide equipment belts. Available for popular duty sidearms. 164 165 164 Sentinel™ Drop Loop This low ride duty holster features a metal shank, jacket-slot design belt loop, along with full suede leather lining and a sight track. Additional specifications include two adjustable tension screws and thumb break retention for security. Available for popular semi-autos. 16 165 Sentinel™ Hi Ride This high ride holster offers the same retention features and sight track as the low riding version, but features a dual slot belt loop for a high stable configuration. Available for popular semi-autos. On-Duty Holsters 800.645.AKER 114 Nightguard™ Duty Series Our new low ride Nightguard™ Duty Series allows the officer to carry the duty weapon with a tactical light attached, as many departments require. Retention is accomplished by a thumb release combined with a tension screw. Available for popular gun/light combos. 115 Available in a high ride configuration. 115 114 122 Patrolman Our very popular duty holster is a top grain leather-lined jacket-slot style rig, featuring a thumb break and a tension screw. This offers maximum weapon retention without compromising speed of draw. Available for most semi-autos. 123 Available for popular revolvers. 122 123 121 Security Special™ 121 The Security Special™ is a high ride, level one retention holster, designed for law enforcement and security agencies. This holster features both a 2-1/4” belt tunnel and a pair of 1-3/4” belt slots. Available for popular revolvers. 17 On-Duty Belts akerleather.com The most important part of any duty rig is the belt. When carrying all the gear your career demands, there is no substitute for a full-grain leather belt, lined for durability and support. From classic Sam Browne Belts to Buckleless Velcro® Belt Systems - Aker duty belts are the choice for major police departments who trust Aker for support. Sam Browne Belts B01 Our 2-1/4” wide Sam Browne belt is made of high quality, heavy duty cowhide for durability and is fully leather lined for comfort (2” oversize is built in). B01 B01W Specially designed curved belt for policewomen. Features all the options of our standard Sam Browne belt (2” oversize built in). B03 B01W Same as B01, except it is half-lined with top grain leather. B03 B06 This sturdy 2-1/4” River belt is fully leather lined and features 1-1/2” billets. A 2” oversize is built in. Truly a belt to ride the river with! B06 B07 B07 Heavy duty Garrison belt available in 1-3/4” width. B08 Same as B07 but in a 1-1/2” width. B08 Velcro® Duty Belt System B02V This buckleless system features Velcro ® closure for convenience and comfort. Keepers or buckles are no longer needed. B02V B08V B08V The 1-1/2” underbelt is designed to support the Velcro® Sam Browne belt. B15 B15 Duty pant belt with Velcro ® fastener. Available in 1-3/4” width. B16 B16 18 Same as B15 but in a 1-1/2” width. Handcuff Cases 800.645.AKER 500 Compact round handcuff case fits both hinged and chain handcuffs. Slides onto belts up to 2-1/4”. Hidden snap optional. 500D Same as 500 but made to hold two pairs of handcuffs. Available in Velcro ® closure only. 500 500D 508 Handcuff case fits both hinged and chain handcuffs. Slides onto belts up to 2-1/4”. Hidden snap optional. 504 This 1” wide handcuff strap snaps onto belts up to 2-1/4”. 508 504 501 Teardrop shape completely encloses handcuffs. Slides onto belts up to 2-1/4”. Hidden snap optional. 502 This compartment style open top cuff case slides onto belts up to 2-1/4”. 501 502 505 Our new Slim-Cuff™ case, with it’s narrow design, allows more room on one’s duty belt, giving a full grip on the cuffs. 506 This slim cuff case with pull-through release slides onto belts up to 2-1/4”. 606 For hinged cuffs. 505 506 19 Magazine Pouches akerleather.com Magazine Pouches 510 Double magazine pouch with specially designed belt attachment allows for a vertical or horizontal carry. Low profile facilitates quick release. Slides onto belts up to 2-1/4”. Hidden snaps optional. 510D Same as 510 but made to hold 4 magazines and designed with Kydex separators to keep magazines securely in place. 511 Single magazine pouch designed for vertical carry. Slides onto belts up to 2-1/4”. Hidden snap optional. 510 511 510D Speedloader Cases 520 This single speed loader carrier is made to fit HKS brand loaders, and is available for K-L frame (medium), or N frame (large) speed loaders. Slides onto belts up to 2-1/4”. Hidden snap optional. 521 Same as 520 but holds two HKS brand speed loaders. Hidden snaps optional. 520 629 516 Carry Comp™ The Carry Comp™ magazine pouch offers fast access to reloads, uses a tension screw for security and conveniently snaps onto belts up to 2-1/4”. 516 20 521 Pro-Mount™ This unique five round ambidextrous buttstock shotgun shell carrier is lined with a special suede material that prevents slippage and absorbs shock. The twin 3/4” gripping holes combined with the Velcro ® closure gives a quick, secure mount with easy removal. 629 Mace Cases / Glove Pouches 800.645.AKER Mace Cases 570 Fully enclosed mace case specially designed for 4 oz. canisters. Snaps onto belts up to 2-1/4”. Hidden snap optional. 571 Same as 570 but slides onto belts up to 2-1/4”. Hidden snap optional. 572 Open top mace case specially designed for 4 oz. canisters. Snaps onto belts up to 2-1/4”. 573 Same as 572 but slides onto belts up to 2-1/4”. 575 Fully enclosed mace case specially designed for 2 oz. canisters. Snaps onto belts up to 2-1/4”. Hidden snap optional. 576 This mace case specially designed for MK VI canisters. Snaps onto belts up to 2-1/4”. 788 This mace case is for MK 9 canisters. Snaps onto belts up to 2-1/4”. 570 571 572 573 575 576 788 Glove Pouches 557 Due to unpredictable events, it makes sense to carry latex gloves on duty. This supple leather pouch holds up to 4 pairs of gloves and slides onto belts up to 2-1/4”. Available in Velcro ® closure only. 586 This leather pouch holds up to 12 pairs of latex gloves and snaps onto belts up to 2-1/4”. Hidden snaps optional. Can also be used as a shotshell pouch. 557 586 21 Flashlight Cases / Baton Holders akerleather.com Flashlight Cases 540 Snap on carrier with a shatter resistant plastic ring for “D” cell flashlights. Snaps onto belts up to 2-1/4”. 541 This high riding flashlight carrier snaps onto belts up to 2-1/4”. Available for “D” cell flashlights. 541S 541XT 541S Available for the Stinger flashlight. 541XT Available for the PolyStinger and Stinger XT flashlight. 548LED Full coverage flashlight holder made to hold the Streamlight Strion LED, Scorpion LED, and 6PX flashlights. 540 554 This trim open top, open bottom flashlight holder features a passive, pull-through retention device to prevent losing one’s flashlight. Available for the Stinger. 554XT 654 Available for the PolyStinger and Stinger XT. Available for the Surefire 6P and Pelican M9. 555 555LED Same as the 554 but featuring a full flap closure. Made to hold the Streamlight Stinger LED and PolyStinger LED flashlights. 548LED 556LED This holder features full coverage and flap closure. Available for the PolyStinger LED, DS LED and Poly DS LED flashlights. Hidden snap optional. 556LED 554XT 554 Baton Holders 550 551M Snap on baton ring. Made for side handle batons. Features a black metal ring. 552 This baton carrier is the scabbard for the expandable tactical batons. Features an open bottom allowing quick storage of an extended baton when both hands are needed for cuffing. Snaps onto belts up to 2-1/4”. Specify either 21” or 26” batons. 652 This baton carrier is designed for the Winchester collapsible baton and snaps onto a 2-1/4” belt. 551M 550 22 552 552 652 Keepers / Radio Holders 800.645.AKER Keepers 530 Double snap 1” wide keeper snaps onto belts up to 2-1/4”. Hidden snap optional. 531 Double snap 3/4” wide keeper snaps onto belts up to 2-1/4”. 532 Extra wide deluxe keeper snaps onto belts up to 2-1/4”. Features special slots for 1-3/4” trouser belt. Hidden snap optional. 533 This belt keeper has a hidden pouch for a spare cuff key, house key, etc. 530 531 532 533 588U Side view front, back 588 588U-XTS Radio Holders 588 The swivel radio holder is a lightweight option that slides onto 2-1/4” belts. The radio holder features a plastic swivel piece that twists and locks onto the body of the holder and an elastic retention strap to prevent the radio from falling out. Available for Motorola XTS3000 or XTS5000 radio. 588U Snaps onto belts up to 2-1/4”. Adjusts to accept virtually any hand-held radio. Features a steel reinforced base support. 588U-XTS Same as 588U, but made to fit the Motorola XTS3000 radio. 587 Belt style radio carrier slides onto belts up to 1-3/4”. Made to accommodate the Motorola Saber and KTS 3000 radios. 587 23 Citation Books / Notebook Covers akerleather.com Citation Book Covers 580 Holds one citation book and has one storage pocket. Also included is a thin Kydex plate to stop the carbon transfer to blank tickets underneath. Made of heavy cowhide with strong metal clips to securely hold the citation book in place. 581 Holds two citation books and has two storage pockets. Also included are two thin Kydex writing plates to stop the carbon transfer to blank tickets underneath. Made of heavy cowhide with strong metal clips to securely hold the citation books in place. 581 580 Notebook Covers 582 Cover for 3” x 5” notebooks with plastic insert to cover ID or business cards. 583 Cover for 4” x 7” notebooks with plastic insert to cover ID. 582 583 ID Cases 596 Features two 2-1/4” x 3-1/2” ID windows. 596 596A Same as 596 but features large double 3” x 5” ID windows. 596A 24 Badge Holders 800.645.AKER Badge Holders 590 Clip-on badge holder for Federal badge. Features a black clip for a low profile inside the waist band carrier. 591 Clip-on badge holder for Shield badge. Features a black clip for a low profile inside the waist band carrier. 592 Clip-on badge holder for Star badge. Features a black clip for a low profile inside the waist band carrier. 691 690 591 592 690 Recessed badge holder for Federal badge incorporates back clip, Velcro ® closure, and chain for all types of carry. 691 Recessed badge holder for Shield badge incorporates back clip, Velcro ® closure, and chain for all types of carry. 590 599 597 This reversible undercover badge and ID holder is designed to be worn around the neck. Fits all style badges. 597 599 This undercover necklace badge holder offers concealment with quick access to one’s badge. Incorporates a back clip and chain for all types of carry as well as a flush mount for badge protection. 25 Key Holders / Body Alarm Cases akerleather.com Key Holders 560 Key flap protects trousers from key rub and wear and snaps onto belts up to 2-1/4”. Comes with matching spring hook and split key ring. 561 Key strap snaps onto belts up to 2-1/4”. Comes with matching spring hook and split key ring. 564 Silent key holder has flaps with Velcro® closure to prevent keys from jingling at inappropriate times. Slides onto belts up to 2-1/4”. 564 562 Jailer’s double key flap protects trousers from key rub and wear. Snaps onto belts up to 2-1/4”. Comes with matching spring hooks and split key rings. 561 560 510FA Our “Folger Adams” double pouch provides the key carrying capacity needed by officers who work in correctional facilities. 511FA Same as 510FA but in a single version. 511FA 510FA 562 Body Alarm Cases 584 Holds personal alarm unit. Snaps onto belts up to 2-1/4”. 684 Holds personal alarm unit. Snaps onto belts up to 2-1/4”. 699 Jailers Leash 584 26 684 699 This 25” long braided leather key retainer allows keys to be attached to a belt loop, but has enough length to use the keys without un-hooking them. Available in black only with brass hardware. A-TAC™ Duty Gear 800.645.AKER • • • • Weatherproof Ultra lightweight and rugged Flexible in all weather Easily cleaned with soap and water Used with 2” or 2-1/4” belts Dual fastening belt slide system utilizes both snap and Velcro® hook and loop belt attachments. CB01 Our 2” duty belt features a high impact buckle with 3-pt. security system. Features a hidden lock on body side, a Velcro ® loop with an adjustable hook and a heavy duty hanging clip. CB08 1-1/2” underbelt (not pictured) 908 908 Single handcuff case. Fits both hinged and chain cuffs. 910 Double Magazine Pouch. Rides vertical or horizontal. 910 931 931 1” wide keeper with 2 black hard action snaps. Comes in packs of 4. 948LED Small flashlight case. Available for the Streamlight Strion LED, Scorpion and Surefire 6PX. 954 Large flashlight holder. Open top, open bottom. Available for the Streamlight Stinger, Stinger XT, Stinger DS LED, and the PolyStinger DS LED. 954S 954 952 956 Same as the 954 but for small flashlights. 948 956LED Large flashlight case. Available for the Streamlight Stinger LED and Stinger DS LED flashlights. 952 Baton holder available for the 21” and 26” batons. 957 Glove pouch. Holds up to 4 pairs of latex gloves. 964 Silent key holder. 957 964 970 Fully enclosed mace case. Specially designed for 4 oz. canisters. 975 Fully enclosed mace case. Specially designed for 2 oz. canisters. 970 975 988 Radio holder made for most popular radios. Elastic tie down with snap allows for an adjustable system to hold radios of varying lengths. Attaches to the duty belt with a slide on swivel. 988U Universal radio holder. Steel reinforced base support made out of leather for extra durability. 989 989 Holster allows an MK9 canister and Stinger flashlight to be carried tactical style. Fully adjustable. 988 988U 27 Pro-Bond™ Series akerleather.com Combining years of craftsmanship and excellence, Aker has designed the new Pro-Bond™ line. Made from premium bonded leather, Pro-Bond™ reflects our commitment to the highest grade of affordable quality and durability. RB01 Our 2-1/4” wide Sam Browne belt is made of high quality bonded leather and is fully leather lined for comfort (2” oversize is built in). RB01 RB07 Heavy duty bonded leather Garrison belt available in 1-3/4” width. RB08 Same as B08 but in a 1-1/2” width. RB08V The 1-1/2” heavy duty bonded leather underbelt is designed to support the Velcro ® Sam Browne belt. RB07 RB08 R301 Our Comfort-Flex ® shoulder system features a specially designed contoured harness that prevents the center piece from riding up and placing the weapon’s weight on the base of the neck. The weight is on the shoulder muscles, preventing the pain that may be experienced from an improperly designed harness. The rear strap attaching point is at the lower edge of the holster, which offers a diagonal carry for maximum concealment, even with 5” autos or 4” revolvers. Constructed of high quality bonded leather with a full grain leather strap and using black hardware, the Comfort-Flex ® system rides more like a vest than a holster. Available for popular semi-autos. R301 28 Ordering Information 800.645.AKER Safety Information In 1981, I had a vision…to produce durable leather products for law enforcement that would stand the test of time for safety and reliability. Now, over 34 years later, AKER leather products can be seen as the first choice for the California Highway Patrol, U.S. Customs and Border Protection; NCIS, FBI Academy, Honolulu PD, U.S. Navy, the U.S. Postal Service, the Los Angeles Police Dept. and the San Francisco Police Dept., to name just a few among the many satisfied customers nationwide and world wide who wear AKER. Our research and development department continually strives to come up with new items in line with the ever-changing technology in the field. But what doesn’t change is the superior quality of the highest grade top grain leather, thread, dyes and hardware which go into our products. Each individual item is hand-made in our factory in the U.S.A. using traditional old-world craftsmanship combined with stringent quality control and painstaking attention to detail. These factors have made AKER a leader in the law enforcement community. In addition to the expertise of our employees, our success would not have been possible without the dedication of our loyal dealers, distributors and both our on duty and off duty customers who have bought AKER leather products these many years. From one man’s vision has come a company dedicated to the law enforcement community, a company whose products are relied upon for their safety and durability and at the same time, have the right look, the right feel, and the right price.......AKER. AKER International cautions against the use of its products by persons untrained or inexperienced in the use of firearms. Careless or negligent usage of any firearm with or without these products may be dangerous and result in injury or death. Products have been inspected prior to shipment by the manufacturer; however, the user/buyer should inspect the product before use. Snaps and fasteners should be inspected regularly to ensure proper security of handgun. Should any AKER leather product become worn, loose, defective, or ill-fitting, cease use immediately. Fingers must be kept clear of the trigger and hammer when inserting or removing a firearm into or from a holster. Always keep safety strap snapped. No holster is completely “snatch proof”. Therefore, the user must exercise extreme diligence at all times in any situation where another person may attempt to take the user’s handgun. We caution against the use of custom, worn, or broken guns, and guns of inferior quality. We also caution against the use of any accessories which might interfere with the proper and safe fit of the gun in the holster, including such accessories as oversize hammers and triggers, trigger shoes, oversize grips, and grip adapters. Any handgun modification may cause improper holster fit and accidental handgun discharge. Do not alter or modify AKER leather products in any way. Order Options Terms of Sale Please be as specific as possible to assure prompt handling of your orders, specify plain or basket weave along with the color and hardware choice. In accordance with the Magnuson-Moss Warranty Act of 1975, all AKER products are sold “as is” and “with all faults”. The entire risk as to the quality and performance is with the buyer. Should any AKER product prove defective following its purchase, the buyer, not the manufacturer, distributor, or retailer, assumes the entire risk of all necessary servicing or repair. The implied warranties of merchantability and fitness for a particular purpose and all other warranties, expressed or implied are excluded from the transaction and shall not apply to the product sold. The determination of the fitness or the suitability of any product for a specific use is the responsibility of the buyer. All prices, terms, conditions, colors, materials, and styles are subject to change without notice. Items will be shipped in plain black with chrome hardware unless otherwise specified. The following is a list of options available: Color: Black or Tan. Finish: Plain or Basket Weave. Hardware: Nickel, brass, or black. Hidden snaps: Optional on many accessories. Lining: Top grain leather or Unlined. Velcro ® Closure: Special order only. *Minimum product orders are indicated by a number in the color choice column(s).* Returns AKER is an approved GSA supplier - GSA Contract GS-07F-8884D. Call or write for complete details. Claims must be made within ten days after receiving product. Call our customer service department at (619) 423-5182 to receive your return authorization number. Merchandise without an RA# will be returned to the sender unopened. Merchandise returned not due to a factory error is subject to a 20% restocking fee. Returns cannot be accepted for items that are discontinued, used, non-stocked, or custom made. Ordering Information Shipping Use the illustrations to determine measurements needed for ordering. All claims for shortages or misshipped merchandise must be reported within 10 days. All shipments are F.O.B. Chula Vista, CA factory. Holsters Belts To ensure that your gun and new holster match exactly for a custom fit, specify make and model of gun, barrel length, and caliber. Please specify your exact waist size and belt width where choice is available. To determine your size from your present belt, measure from the hole you are using to the outer edge of the buckle. For belts sized XS-XXXL, use the following chart: Attention Government Buyers H. Kamuran Aker Chairman of the Board Revolvers: On Duty . . . Off Duty Measure from the face of the cylinder to the end of the barrel. Automatics: Measure from the rear portion of the ejection port to the end of the barrel. All of our holsters are available in left-handed models at no additional charge. Specify LH when ordering. XS = 26”-28” XL = 42”-44” SM = 30”-32” XXL = 46”-48” MED = 34”-36” LG = 38”-40” XXXL = 50”-52” Belts over 48”, XXL, XXXL: add 15% Good leather stretches slightly with prolonged use. Since our leathers are the finest, we’ve allowed for the natural expansion of the holster body by tightening the fit during the molding, bonding, and stitching of our holsters. A secure, safe fit is therefore always assured. Special Thanks To the San Diego District Attorney’s Office and Sheriff’s Department for their assistance in producing the Law Enforcement related photography. 2248 Main Street, Suite 6 Chula Vista, CA 91911-3932 619 423-5182 TEL 619 423-1363 FAX www.akerleather.com © 2015 Aker International, Inc. On Duty...Off Duty On Duty...Off Duty
© Copyright 2024