creative™ 2.0 Peacock Quilt
Approximate size 34" x 60" (86 cm x 154 cm)
Sewing Supplies
2/3 yds x 44" (60 x 110 cm wide) blue tone on
tone batik
yy
Fusible webbing
yy
Tear away stabilizer
yy
2/3 yds x 44" (60 x 110 cm) floral blue batik
yy
Solvy water soluble stabilizer
yy
½ yd x 60" (40 x 160 cm) purple/pink silk
yy
Water soluble marker
yy
½ yd x 60" (40 x 160 cm) dark purple/blue silk
yy
Yellow roving (for peacock crown)
yy
½ yd x 44" (50 x 110 cm) blue silk (tail, border and tabs)
yy
Rayon Embroidery thread 40 and 30 weight
yy
½ yd x 44" (40 x 110 cm) turquoise cotton
yy
Metallic thread
yy
14" x 16" (35 x 40 cm) floral orange cotton
(peacock body)
yy
Sewing thread
yy
Bobbin thread
yy
8" x 14" (20 x 35 cm) yellow cotton (wing)
yy
Monofilament thread
yy
14" x 16" (35 x 40 cm) pink silk (beak and legs)
yy
Olfa 45 mm Deluxe Rotary Cutter
yy
2 1/8 yds x 60" (2.0 m x 160 cm) blue batik
(backing and binding)
yy
Omnigrid Ruler 8 ½" x 24"
yy
1 ¼ yds x 60" (1.0 m x 160 cm) quilt cotton batting
yy
Olfa Rotary Cutting Mat
yy
1 ¼ yds x 55" (1.0 m x 140 cm) polyester batting
(for Trapunto)
yy
Safety Pins
yy
Embroidery Needle Size 90
yy
2 yds x 1 ¾" (2.0 m x 4 cm) ribbon with floral
pattern (for woven border)
yy
Glass beads
yy
Ribbon floss
yy
Fusible interfacing
yy
Large eye needle for beading
yy
creative™ 2.0 Peacock Quilt 1
Pfaff® Accessories
Polyester Batting
820654-096
yy
3 pieces 10" x 34" (25 x 85 cm) for trapunto
yy
Sewing Star Foot yy
¼ inch Right Guide Foot with IDT™ 820541-096
or Clear ¼" Quilting foot 820833-096
Blue batik
yy
Clear Stitch-in-Ditch Foot or Stitch-in-Ditch Foot with IDT™ yy
5 pieces 3" x 43" (7.5 x 110 cm) binding
yy
1 pieces 39" x 60" (100 x 160 cm) backing
yy
Open-Toe Appliqué Foot, 9 mm with IDT™
820213-096
yy
Embroidery/Sensormatic Free-motion Foot
820671-096
yy
creative™ Master Hoop yy
Pfaff® Hobby™ 350P Punching machine (for felting)
820882-096
820542-096
412 96 85-02
You will find these and many other accessories in our
Pfaff® Accessory User’s Guide, on web site www.
pfaff.com, and for purchase at your nearest Authorized
Pfaff® Dealer.
Cutting Instructions
¼" (6 mm) seam allowance included in all
measurements.
Blue tone on tone batik
yy
6 pieces 3 ¼" x 43" (8,2 x 110 cm)
Floral blue batik
yy
6 pieces 3 ¼" x 43" (8,2 x 110 cm)
Purple/pink silk
yy
yy
2 pieces 3 ¼" x 43" (8,2 x 110 cm)
3 pieces 6" x 7" (15 x 18 cm) Tabs
Dark purple/blue silk
yy
2 pieces 3 ¼" x 43" (8,2 x 110 cm)
yy
1 pieces 6" x 43" (15.2 x 110 cm)
Turquoise cotton fabric
yy
2 pieces 3 ¾" x 43" (9,2 x 110 cm)
yy
2 pieces 3 ¼" x 43" (8,2 x 110 cm)
Cotton Batting
yy
39" x 60" (100 x 160 cm)
Assembly Instructions:
1. Thread your Pfaff® sewing machine with sewing
thread on top and in the bobbin. Snap on the ¼"
Right Guide Foot or Clear ¼" Quilting foot and
engage IDT™.
2. Select a straight stitch, length 2.5 mm.
3. Sew together in long rows the 6 – 3 ¼" x 43"
(8,2 x 110 cm) blue tone on tone batik strips and
the 6 floral blue batik strips using a ¼" (6 mm)
seam allowance. Create strata alternating the
fabrics. Press the seams towards the floral blue
batik.
4. Sub-cut the strata into 4 – 10" (25.5 cm) widths.
5. Sew together in long rows the 2 – 3 ¼" x 43"
(8,2 x 110 cm) purple/pink silk strips and the 2
dark purple/blue silk strips using a ¼" (6 mm)
seam allowance. Create strata alternating the
fabrics. Press the seams towards the dark purple/
blue silk.
6. Sub-cut the strata into 9 – 3 ¾" (9.2 cm) widths.
7. Layout the strips into groups of 3, being sure to
alternate the colors. Sew together to create 3 rows
each with 12 squares. Press the seams towards the
illu
1 purple/blue silk.
illu 2
dark
Blue silk fabric
yy
2 pieces 3 ¼" x 43" (8,2 x 110 cm)
yy
yy
2 pieces 6" x 7" (15 x 18 cm) Tabs
Remaining is used for the tail
creative™ 2.0 Peacock Quilt 2
8. Layout blue tone on tone batik and floral blue batik
stratas and the purple/pink silk and dark purple/
illu 2blue silk as illustrated and sew together.
illu 1
12. Continue embroidering until you have embroidered
illu 5 row.
each
illu 2
9. Set up for embroidery: attach the embroidery unit
and the Embroidery/Sensormatic Free-motion
Foot. Thread your machine with 30 weight rayon
illu 4bobbin thread in the
embroidery thread on top and
bottom.
10. Select the illustrated quilt design on your Pfaff®
illu 3
creative™
2.0 sewing and embroidery machine.
11. For trapunto effect place the polyester batting strip
illu 4
under the silk pieced rows. Hoop your quilt top and
batting
illu 5 in the creative™ master hoop, be sure to
center the design in the middle of silk rows.
13. Trim the excess batting on the back of the quilt as
illu 6
illu 7
illustrated.
illu
illu 4
14. Remove the embroidery unit and foot. Thread your
illu 10
illu
9
Pfaff®
sewing machine with sewing thread on top
and in the bobbin. Snap on the ¼" Right Guide
Foot or Clear ¼" Quilting foot and engage IDT™.
illu 11
15. Select a straight stitch, length 2.5 mm.
16. To create the woven border, fold the 6" x 43"
(15.2 x 110 cm) dark purple/blue silk strip in half
and sew a ¼" seam along the long side of the
strip.
17. Sub-cut into 12 – 3 ¾" (9.2 cm) pieces. Turn 10 of
them right side out.
illu 12
creative™ 2.0 Peacock Quilt 3
illu 6
18. Layout the pieces on the quilt as illustrated and pin
in place. Put the piece that was not turned right
side out in the bottom position, since it will be
illu 7
illuedge.
8
stitched
into the bottom
illu 7
21. Snap on the ¼" Right Guide Foot or Clear ¼"
Quilting foot and engage IDT™. Select a straight
stitch, length 2.5 mm.
22. Sew together in long rows the 2 – 3 ¼" x 43"
(8,2 x 110 cm) turquoise cotton strips and the blue
silk strips using a ¼" (6 mm) seam allowance. Create
strata alternating the fabrics. Press the seams towards
the blue silk.
23. Sub-cut the strata into 9 – 3 ¾" (9 cm) widths.
illu 6
illu 10
7
illu 7
24. Layout the strips into groups of 2 being sure to
alternateillu
the8colors. Sew together to create 2rows as
illu 10
illustrated.
Press the seams towards
the blue silk.
illu 9
illu 11
19. Place the 3 ¾" x 43" (9.2 x 110 cm) turquoise
strip on top of the quilt as illustrated and sew
together. Press towards the turquoise strip.
illu
8
Repeat
for the other side of the quilt.
illu 7
illu 9
illu 8
illu 10
illu 11onto the quilt as illustrated.
25. Sew
illu 12
illu 12
illu 11
20. Cut the ribbon with floral pattern in half and place
on top of the turquoise strip. Snap on the Open-Toe
Appliqué Foot, 9 mm with IDT™ and bartack in
place under the sections that will be covered with
the10
dark purple/blue silk pieces. illu 11
illu
illu 12
26. Trace the mirror image of the peacock body, tail,
beak and legs onto the paper side of the fusible
webbing. Cut out roughly.
creative™ 2.0 Peacock Quilt 4
illu
illu 10
illu 11
27. Fuse traced appliqué pieces onto the wrong side of
the following fabrics:
Body - floral orange cotton
Tail – blue silk
Beak and legs – pink silk
illu 13 pieces.
28. Cut out all the appliqué
33. Select the peacock feather design. Hoop tear away
stabilizer and quilt and embroider. Remove the
tear away stabilizer. Continue to embroider all 7
feathers.
34. Use the water soluble marker to trace the wing
template onto the right side of the yellow cotton.
Draw
illu 14 a line from the top to the bottom of the wing.
29. Place on the quilt top as illustrated and fuse in
place.
illu 12
illu 15
30. Snap on the Sewing Star foot with IDT™ engaged,
place tear away stabilizer under the quilt. Thread
your machine with 40 weight rayon thread on top
and bobbin thread in the bottom. Choose a satin
appliqué stitch and sew around all the pieces.
Remove the tear away stabilizer and press.
illu 17
31. Set up for embroidery: attach the embroidery unit
and the Embroidery/Sensormatic
Free-motion
illu 13
Foot. Thread your machine with 40 weight rayon
embroidery thread on top and bobbin thread in the
bottom.
32. Plan out the embroideries for the peacock tail, by
printing 7 full size copies of the peacock feather
design. Place them on the quilt top and mark the
position
illu 13 of each with a water soluble marker.
illu 13
illu 14
35. Toggle back to sewing mode. Snap on the Sewing
Star
illu 16foot with IDT™ engaged, place tear away
stabilizer under the wing fabric. Thread your
machine with 40 weight rayon thread on top and
bobbin thread in the bottom. Choose a 9 mm
decorative stitch and sew on the line. Fill theilluentire
16
wing spacing a foot width between the stitches.
Remove
the tear away stabilizer and press.
illu 15
illu 18
14 fusible webbing to the wrong side of the
36. illu
Press
illu 17 fabric. Cut out the wing and fuse in place on
wing
illu 18
the peacock body.
37. Place stabilizer under the quilt and satin stitch
around the wing.
illu 38.
14 Trace the peacock crown onto the water soluble
stabilizer with the water soluble marker. Pin in
place on the quilt top. Place stabilizer under the quilt.
illu 19
39. Satin stitch the lines on the crown.
illu 16
illu 19
illu 15
illu 16
illu 15
illu 17
illu 18
creative™ 2.0 Peacock Quilt 5
illu 17
40. With the Hobby™ 350P punching machine, needle
punch the yellow wool roving in place at the end
illu 16
of
illuthe
17 peacock crown.
49. Foldillu
right
18 sides together and in half sew along the
6" (15 cm) edge to create the tabs. Turn right side out.
illu 19
illu 18
illu 20
illu 19
41. Snap on the Embroidery/Sensormatic Free-motion
Foot and set the machine for free motion zig zag.
Embellish the beak and legs.
50. Fold the tabs in half with raw edges together. Pin
illu 20
them on the quilt top as illustrated.
illu 18
illu 19
51. Join the 3" (7.5 cm) wide binding strips together
with mitered corners to make one long strip.
52. Trim to a ¼" (6 mm) seam allowance and press
open. Fold the strip in half lengthwise with wrong
sides together and press.
42. Center the batting on top side of the backing. Lay
the quilt top right side up on top of the batting.
43. Baste with safety pins approximately every 4" (10 cm)
all over the quilt, making sure that all the layers are flat.
44. Start quilting from the center and work your way
out to the edges. Snap on the Stitch in the Ditch
foot and engage IDT™, thread the top and bobbin
of the sewing machine with invisible thread. Stitch
in the ditch between the rows letting the center
guide of the presser foot ride in the ditch. Remove
the safety pins when you get to them.
45. Change the foot to a regular sewing foot 0A,
engage IDT™ and set your Pfaff® sewing
machine to a 3 step zig zag with a stitch width of
4.5 mm. Sew around the outside edges of the quilt.
53. Starting on the right side of the quilt; sew the raw
edge of the binding to the raw edge of the quilt.
Sew around all sides mitering each corner.
54. Fold the binding to the wrong side of the quilt and
stitch in place from the right side with the Stitch-inDitch Foot.
55. Attach the glass beads to the bottom of the quilt by
threading the beads onto ribbon floss. Thread the
ribbon
floss through the beads and place a small
illu 20
bead at the end and then thread back through the
beads.
illu 20
55. Sew onto the quilt with two rows
of straight stitch.
46. Use a rotary cutter and trim the excess batting and backing.
47. Fuse fusible interfacing onto the wrong side of the
6" x 7" (15 x 18 cm) tabs of blue silk and purple/
pink silk.
48. Snap on the ¼" Right Guide Foot with IDT™ or
Clear ¼" Quilting foot and engage IDT™. Select a
straight stitch, length 2.5 mm.
Finished!
creative™ 2.0 Peacock Quilt 6
position
body
creative™ 2.0 Peacock Quilt 7
A
creative™ 2.0 Peacock Quilt 8
A
C
B
creative™ 2.0 Peacock Quilt 9
B
C
creative™ 2.0 Peacock Quilt 10
C
B
creative™ 2.0 Peacock Quilt 11
B
C
F
E
creative™ 2.0 Peacock Quilt 12
F
E
position
body
creative™ 2.0 Peacock Quilt 13
position
wing
position
legs
body
creative™ 2.0 Peacock Quilt 14
n
position
crown
creative™ 2.0 Peacock Quilt 15
Peacock
crown
creative™ 2.0 Peacock Quilt 16
creative™ 2.0 Peacock Quilt 17
creative™ 2.0 Peacock Quilt 18
creative™ 2.0 Peacock Quilt 19
beak
creative™ 2.0 Peacock Quilt 20
position
body
creative™ 2.0 Peacock Quilt 21
creative™ 2.0 Peacock Quilt 22
beak
creative™ 2.0 Peacock Quilt 23
wing
creative™ 2.0 Peacock Quilt 24
creative™ 2.0 Peacock Quilt 25