1. No category

WARNING
CHOKING HAZARD – Small Parts
KEEP CLEAR OF PINCH POINTS
Not for children under 3 years
My SPY BIRDHOUSETM Includes:
A. House
B. Clear back panel
C. Perch
D. 1” Hole insert
E. 1.25” Hole insert
F. 4 Double-sided square tape
G. 4 suction cups
H. 2-way mirror film
I. Curtain Card
A.
G.
D.
BIRD PRIVACY
Use:
· 2-Way Mirror Film
· Curtain Card
· Or Both
for added privacy and easy bird viewing.
Remove all of the assembly pieces from the
birdhouse and the plastic bag, then slide the
clear back panel onto the birdhouse. (Fig. 1)
STEP 2
The 2-way mirror film allows you to see
the birds inside the birdhouse, without
the birds seeing you. Make sure the inside
of your window is clean prior to adhering
the 2-way mirror film. Spray the window
with water or use a wet cloth on the area
you plan to mount the birdhouse. Make
sure the tab side is on top and facing you
for easy removal. Apply the 2 way mirror
film, then use a dish cloth or paper towel
to dry the 2-way mirror film. Slowly peel
away the backing of the 2-way mirror film
at the tab. (Fig. 4)
Insert the perch by lining the notch with the
keyhole groove on the front of the birdhouse. (Fig. 2)
BIRD CHART
SIZE
Western Bluebird
Mountain Bluebird
Eastern Bluebird
Tree Swallow
Ash-Throated Flycatcher
NO
INSERT
Violet-Green Swallow
Fig. 1
Tufted Titmouse
White-Breasted Nuthatch
Downy Woodpecker
Prothonotary Warbler
Carolina Wren
Fig. 2
1.25”
Chickadees
Black-Capped Chickadee
House Wrens
I.
E.
STEP 1
BIRD
F.
C.
B.
ASSEMBLY
NOTE: Use the Bird
Chart to help you
choose the desired
hole insert for the
type of bird you
wish to inhabit your
birdhouse. If an
insert is needed,
snap the desired
sized insert into
the opening.
H.
1”
STEP 3
Insert the top two suction cups onto the back keyhole slots
onto the back of the birdhouse then slide the suction cups
up to lock in place. (Fig. 3) To insert the third suction cup
on the bottom, simply twist and gently push into place.
The curtain card (Fig. 5) minimizes
disturbances of indoor lights. Clean and
dry the inside window before attaching
the suction cup. Moisten the suction cup
with warm water then firmly press the
suction cup in the middle onto the glass.
Stick the suction cup to the glass above
the 2-way mirror film (if used). Hang the
curtain card on the hook and simply slide
the card at a 90° to 180° angle to watch
the birds.
Fig. 3
STEP 4
Select an outside window in the house that is not an old wavy glass, as it may distort
your view of the birds. Place the birdhouse at least five feet above ground, so it is not
easily accessible to predators, such as squirrels and cats. Clean and dry the outside
window before attaching the birdhouse. Moisten the suction cups with warm water in
a circular motion to ensure the liquid is evenly distributed, then firmly press each
suction cup in the middle onto the glass. If your birdhouse is going to be exposed to
weather below 30°, we recommend attaching the double-sided tape on the back of
the birdhouse near the suction cups.
Fig. 4
Fig. 5
PLACEMENT
Depending on your geographical region, place your birdhouse by February or mid to late March.
For best results, face your birdhouse north or east to minimize exposure to the afternoon heat. Do
not place your birdhouse near a busy street or in an area with constant human activity. Do not be
discouraged if birds do not immediately nest in your MY SPY BIRDHOUSE, as it may take the birds
some time to find it.
Birds By Region
To learn more about birds in your region, visit the following websites:
www.myspybirdhouse.com or http://www.allaboutbirds.org/guide.
DISTRIBUTED BY:
TM
©2013 Hampton Direct, Inc.
Woodland Hills, CA 91367 USA
The MY SPY BIRDHOUSE is made with durable,
engineered resin designed to withstand
extreme conditions and is embedded with colorant that
never requires painting and will offer years of enjoyment.
For any product questions or concerns, please contact us:
By email: [email protected]
or Call: 855-215-3288
By mail: Customer Service, 291 Hurricane Lane,
Williston, VT 05495 USA
MY SPY BIRDHOUSE™ is a trademark
of Lenfest Media Group, LLC.
This product is manufactured and distributed
under license from Lenfest Media Group, LLC.
MADE IN CHINA
INST-7044-40411-100713
WARNING
CHOKING HAZARD – Small Parts
KEEP CLEAR OF PINCH POINTS
Not for children under 3 years
MY SPY BIRDHOUSETM UP CLOSE BIRD FEEDER
1. Insert the perch inside the clear
plastic bird feeder then push
the perch down until it snaps
on each opening.
2. Fill with birdseed to rim
using a spoon or small
measuring cup.
3. Make sure the window
is clean and dry
before attaching
the suction cup.
4. Moisten the suction cup with
warm water then firmly press
the suction cup
on the glass window.
DISTRIBUTED BY:
TM
Up Close Bird Feeder
with suction cup
Perch
For any product questions or concerns, please
contact us:
By email: [email protected]
or Call: 855-215-3288
By mail: Customer Service, 291 Hurricane Lane,
MY SPY BIRDHOUSE™ is a trademark
of Lenfest Media Group, LLC.
This product is manufactured and distributed
under license from Lenfest Media Group, LLC.
©2013 Hampton Direct, Inc.
Woodland Hills, CA 91367 USA
MADE IN CHINA
INST-7044-40412-100913