Sewing Pattern Shirt & Pants Polly Shirt and Pants as set! The shirt is a basic shirt with a fake V-neck and sleeve seams that are moved to the front. Make the shirt in a shorter and longer version and with ¾ and long sleeves. The pants have side pockets and an elastic waist. A yoke as well as a godet at the side seam make the pants look different. Sew the pants with or without pant cuffs. Fabric Recommendation: for the shirt: lightweight cottons, knit fabric such as jersey for the pants: lightweight woolens, cottons, viscose, lightweight denim © schnittchen.com. All rights reserved. Fabric Requirements: for the shirt, long version (short version) sizes 34-38: 140cm (120cm) sizes 40-42: 150cm (130cm) sizes 44-46: 185cm (165cm) for the pants: sizes 34-36: 160cm; sizes 38-46: 190cm lining fabric for the pockets: 30cm with a fabric width of 140 cm Material: elastic with a width of 2,5cm sizes 34-38: 74cm sizes 40-44: 82cm size 46: 96cm thread Sewing Pattern Shirt & Pants Polly fits women’s sizes: 34/36/38/40/42/44/46 size chart in cm for women sizes: sizes 34 36 38 40 42 44 46 bust 82 85 88 92 96 100 106 waist 66 69 72 76 80 84 90 hip 91 94 97 101 105 109 114,5 167,2 167,6 168 168,5 169 169,5 169,5 height *easy: This pattern is suitable for beginners. Sewing your schnittchen sewing patterm here we go... Cutting / Preparation Sewing the pants: Choose your size and copy the pattern onto pattern tracing paper. Tissue paper for copying patterns can be found in fabric and notions stores. ( 1 ) Pin the front and back yokes to the front and back pants pieces right sides together. Sew. Neaten sewing allowance using a zigzag-stitch and press up. Place the pattern pieces onto the fabric, the marked sides showing up. Consider the cutting plan below. ( 2 ) Pin the godets to the front pant pieces right sides together. Sew. Neaten sewing allowance using a zigzag-stitch and press toward the side seam. ( 3 ) Neaten the edges of the pocket bag and pocket bag lining using a zigzag-stitch. Cut all pieces! Please Note: A sewing allowance of 1cm has already been included into the pattern! Unless otherwise noted the sewing allowance measures 1cm. A hem allowance is marked in the pattern. Copy all marks from the pattern pieces to the left side of the fabric pieces using dressmaker’s carbon and a tracing wheel. Cutting Plan Sewing Pattern Shirt and Pants Polly The fabric is laid out on the fold right sides facing each other. The pattern pieces are placed and pinned onto the fabric with the marked sides showing up. Make sure to pin through all layers. fold 4 70cm 2 1 5 3 6 selvedge Größen 34-36: 160cm Größen 38-46: 190cm Pattern List: Pants 1 front – cut 2 2 back – cut 2 3 front yoke – cut 2 4 back yoke – cut 2 5 pocket bag – cut 2 6 godet – cut 2 lining 5 pocket bag – cut 2 fold 70cm 3 2 1 selvedge Größen 34-38: 140cm Größen 40-42: 150cm 3 2 1 Größen 44-46: 185cm Pattern List: Shirt 1 front – cut 1 on the fold 2 back – cut 1 on the fold 3 sleeves – cut 2 ( 4 ) Pin the pocket bag lining to the side of the front pants according to the marks. Sew using a sewing allowance of 0,7cm. Press the pocket bag towards the side. ( 5 ) Pin the pocket bag to the back pant pieces according to the marks. Sew using a sewing allowance of 0,7cm. Press the pocket bag towards the side. ( 6 ) Neaten the sides of the pant pieces separately using a zigzag-stitch until 10 cm below the godets. ( 7 ) Pin the front and back pant pieces right sides together and close the side seams above and below the side pockets using a sewing allowance of 1cm. When sewing stop and start about 1cm into the pocket opening, so that the pocket and the side seam slightly overlap. ( 8 ) Press side seams open. Put the pocket bag to the front and press. Do not fold sewing allowance over. Pin the pocket bags together and sew. ( 9 ) Pin the front and back pants right sides together. Close the inseam. Neaten sewing allowance using a zigzag-stitch and press towards the back. ( 10 ) Turn one pant leg to the right and insert into the other pant leg, that is still left. Thus right sides are facing each other again. Close the crotch seam and neaten sewing allowance using a zigzag-stitch. Turn the pants right sides out and press. ( 11 ) If you are making pant cuffs: fold the hem in about 5cm (or more) and press. Turn the pants inside out and sew the hem by hand using hemstitches. Turnthe pants right side out and fold the lapels up by 2,5cm (or by half of the first fold). Attach the cuffs with a few hemstitches by hand. Press. ( 12 ) You may also sew the pants with a simple hem. First check the length of the pant legs and shorten eventually. Neaten the edges using a zigzag-stitch. Fold in 1cm, press and fold in 1cm again. Topstich. ( 13 ) Neaten the upper edge of the yokes using a zigzag-stitch. Fold in 4cm and press. Sew at about 3cm from the top. Leave an opening of about 4cm to insert the elastic in the next step. ( 14 ) Cut the elastic according to the given measurements (please check the correct length first). Insert the elastic using a safety pin and close. Then close the opening. Sewing the shirt: ( 1 ) Pin the front to the back right sides together. Close the right shoulder and side seams. Neaten sewing allowance using a zigzag-stitch and press towards the back. ( 2 ) Add the bias tape to the neckline and the hem. For this, fold the bias tape in half lengthwise and press. Pin bias tape to the neckline and hem right sides together. Sew with a sewing allowance of 0,7cm. Fold and press bias tape towards up, then fold over encasing the raw edges. Press again and pin, stitch in the ditch. ( 3 ) At the V-neck add a dart to the bias tape neckband from the left and stitch carefully. Press. ( 4 ) Close the left shoulder and side seams. Neaten sewing allowance using a zigzag-stitch and press towards the back. ( 5 ) Hem the sleeves according to step ( 2 ). ( 6 ) Sew the darts to the sleeves. Fold the dart, matching up the lines as best as you can. Start at the edges and sew to the tip of the dart. Secure seam in the beginning, let a long thread tail and knot the tail close to the edge. Press the dart up. ( 7 ) Neaten the sewing allowance of the sleeve seam separately using a zigzag-stitch. ( 8 ) Pin the sleeve right sides together and close seam. Press the sewing allowance open. ( 9 ) Pin the sleeves to the armhole right sides together (make sure to match up marks!) and sew. Neaten sewing allowance using a zigzag-stitch and press towards the body. Finished - Congratulations! There is a detailed step-by-step photo tutorial for sewing this pattern. Find it at schnittchen.com >> Sewing Pattern Shirt and Pants Polly (Schnittmuster Shirt und Hose Polly) Do you have questions or comments concerning the pattern? Do not hesitate to contact us! ([email protected]) em ’ w o Sh aelnl.c!om/club ttch schni [email protected] www.schnittchen.com
© Copyright 2024