reduced movility NX IBERNEX Peripherals for people with reduced movility Personal solutions Ibernex brings you the market last innovations that give a solution to the different needs (for old people or disabled people) with adapted, safe and useful devices. REFERENCE DESCRIPTION NX0130 RCU lanyard (includes the cord) NX9610 Acoustic detector NX9620 Pneumatic push-button NX9621 Pneumatic push button NX0310 Bed presence sensor NX0320 Bed presence hub NX9630 Double switch (blowing, aspiration) NX9640 Double switch (tongue, chin or cheek) NX9650 Pedal switch Reduced movility People with reduced movility due to a physical disabled caused by the age, illness, accident or mental disabled (temporal or permanent) need a special attention and also a personal adaptation of the user’s services. NX0130 The RCU (Remote Control Unity) allows the resident to generate alarms from anywhere in the room by pressing a button. Includes the cord. NX9620 Pneumatic push-button. Waterproof (IP66 protection). Surface assembly, also in a 55 switch case. NX9610 NX9621 Acoustic detector (very sensitive). Offers an intelligent analysis of voice levels. The sensitivity and the reaction capacity can be adjusted. Manual push-button. Reacts easily by touching the pneumatic area. IP44 waterproff protection. Technical office: Carretera de Cogullada 11, 50014 Zaragoza, Spain • Email: [email protected] • Phone. +34 976 794 226 / Fax. +34 976 233 366 • www.ibernex.es reduced movility Peripherals for people with reduced movility Personal solutions NX9630 This device has a tube and two switch outputs. When somebody blows or aspirates into the tube, the two switch outputs are activated. Allowing the control of these two different functions. To activate each of these two options (blowing or aspiration) it is not necessary to move the air; only apply force with the mouth in the needed way. NX9640 This device consists of a rod and a double sensor that allows detecting two directions of movement. It’s designed to detect the minimunm efforts (the movement of tongue, chin, cheek or other areas of the body) The switch can be installed in any direction or orientation. NX0310 y NX0320 Bed sensor and bed sensors hub that allow: • • • • Detecting the users’ presence on bed RF communication with the terminal NX0010 and NX0011 Using very sensitive piezoelectric sensors, that detects the lightest movements over the bed during the sleep (breathing, heart rate…) Avoiding risk situations for the user; warning in case of: abandonment of bed, wandering or fallings. NX9650 This switch is specially indicated to be activated by the foot or with a light press in the plant or in the tip. Antiskid and roll design. Technical office: Carretera de Cogullada 11, 50014 Zaragoza, Spain • Email: [email protected] • Phone. +34 976 794 226 / Fax. +34 976 233 366 • www.ibernex.es