How to update the Cigraph dongle without an Internet connection...

How to update the Cigraph dongle without an Internet connection using the .rtu file
If the computer where ArchiCAD is installed is not connected
to internet, you can update your Cigraph dongle using an
.rtu file.
To do this, you must ask Cigraph for the .rtu file which will
be sent to you by e-mail (the file can be received at any workstation with an internet connection).
Copy the .rtu file to the computer where the Cigraph dongle
is connected (and ArchiCAD is installed), then continue as
described below (the instructions vary depending on whether
you use Windows or Apple).
Procedure for Windows users.
1) From the Start menu, go to the Control Panel and doubleclick on WIBU-KEY:
Switch to Expert mode by right clicking above the WIBU-KEY
dialog title bar and select Expert Mode from the context
menu which appears:
If the control is not in Expert mode, the following dialog box
will be displayed:
If the control is already in Expert mode, then the number of
panels available in the dialog increases (from four to twelve):
3
Listed on the right are all the WIBU dongles connected to the
computer (not just the Cigraph dongles, but also the
ArchiCAD dongles or those of other software using dongles
of this type):
3) Listed on the right are all the WIBU dongles connected to
the computer (not just the Cigraph dongles, but also the
ArchiCAD dongles or those of other software using dongles of this type)
4) Click on the Browse… button:
2) To programme the dongle using the .rtu file, display the
WIBU-BOX Update panel:
4
5) Select the .rtu file and then click on the Open button.
Procedure for Macintosh users
You'll go back to the previous section where the path of the
selected file will appear in the relative field:
1) From the Applications directory, go to the WIBUKEY directory and double-click on the WkConfig application:
6) click on the Apply button to begin programming the selected dongle:
Your Cigraph dongle has now been programmed and you
can use the purchased products.
The following dialog box will be displayed:
2) Select the Update button at the top right to move on to
the next window:
5
Listed at the centre are all the WIBU dongles connected to
the computer (not just the Cigraph dongles, but also the
ArchiCAD dongles or those of other software using dongles
of this type):
3) In the list, select the dongle to update (the name of the
.rtu file you have received indicates the number of the
corresponding dongle).
4) Click on the Execute Update… button:
6
5) Select the .rtu file and then click on the Open button.
Opening the file automatically launches updating of the dongle.
Your Cigraph dongle has now been programmed and you
can use the purchased products.