This product is certified code inside diameter 1297392 1298470 1215680 1090100 1090097 1215698 EN outside diameter working pressure burst pressure weight nominal bending radius vacuum length max mm inch mm inch bar psi bar psi kg/m lbs/ft mm inch bar m ft 51 76 102 152 203 254 2 3 4 6 8 10 71 96 132,5 188 249 303 2,80 3,78 5,22 7,41 9,81 11,94 15 15 15 15 15 15 225 225 225 225 225 225 60 60 60 60 60 60 900 900 900 900 900 900 2,80 4,12 8,15 17,17 27,79 39,33 1,88 2,77 5,48 11,54 18,67 26,43 500 850 1200 2000 2800 3500 19,7 33,5 47,3 78,8 110,3 137,9 0,9 0,9 0,9 0,9 0,9 0,9 12 12 12 12 12 12 40 40 40 40 40 40 Dock oil hose according to EN 1765 and BS 1435 Standards: EN 1765 type S 15, BS 1435 type S 15. RINA approved n. MAC128208CS. Application: hardwall hose used for the suction and discharge of petroleum products from tankers and barges, bunkering service and industrial applications; suitable for aromatic content up to 50%. Realized with built-in fittings. Available also with swaged-on fittings. Temperature: from -20°C (-4°F) to +82°C (+180°F). Construction Tube: black, smooth, synthetic rubber, suitable for aromatic content up to 50%. Reinforcement: high strength synthetic cord (steel wire for size 254 mm), steel helix wire, and antistatic copper wires. Cover: black, smooth (wrapped finish), synthetic rubber resistant to weathering, oil and sea water. Electrical Resistance: electrically continuous. Branding: continuous yellow stripe “On Shore Transoil Electrically Continuous EN 1765 S 15 - logo IVG” and marking according to specifications. IVG Colbachini is not liable for the use or applications that differes from what is confirmed in their technical catalogue, product sheets, offers, order confirmations and recommendations contained in them. For a correct use please refer to “Recommendations for the selection, storage, use and maintenance of rubber hoses”, published by Assogomma and available on www.ivgspa.it CN 码头输油排吸管质量标准: EN 1765 type S 15, BS 1435 type S 15. RINA approved n. MAC128208CS 应用范围: 导电硬壁软管，用于从罐车和驳船排吸石油产品，并且还在其它工业领域应用，适合输送含50%芳香烃的石油产品；可以提供扣压式或建入式接头温度范围: -20℃至+82℃ 软管结构内层: 黑色,光滑，适合输送50%的芳香烃含量的合成橡胶加强层: 高强力合成线绳，加螺旋钢丝骨架（直径254mm）和防静电铜丝外层: 黑色，光滑 (表面布纹)，抗老化、耐油和海水的合成橡胶商标: 橡胶管表面连续螺旋黄色条纹”On Shore Transoil Electrically Continuous EN 1765 S 15-logo IVG”,可按照不同规格标记 www.ivgspa.it 14 ONSHORE Transoil