More Precision
capaNCDT // Capacitive displacement sensors and systems
18
Compact capacitive single channel measurement system
capaNCDT 6110
- Compact and robust construction
- High temperature stability
- Nanometre repeatability
- Suitable for all conductive materials
-2
4V (9 – 36V) standard power supply for
industrial applications
- Ideal for OEM applications
- Suitable for practically all sensors
System construction
The capaNCDT 6110 single channel capacitive electronics is an extremely compact and low cost
controller, compatible with all Micro Epsilon capacitive sensor ranges. Designed to be robust
and simple to use, it is ideally suited to integration into OEM applications and simple single channel end user requirements. With all items available from stock, the user can quickly select the
most suitable sensor range and cable length to be used with the capaNCDT 6110 electronics.
For higher volume applications, the capaNCDT 6110 can be used as a base specification for
modification to user specific requirements.
The flexible 9-36V DC power supply, enables the capaNCDT 6110 series to also be used in
mobile applications. Measurement output values are selectable 0-10V or +/-5V DC and high
temperature stability and resolutions are achieved.
A measuring system consists of:
Capacitive displacement sensor
Sensor cable
Controller
Supply and signal output cable
Accessory:
Power supply
Oscillator
9...36V Voltage
conditioning
fOSC 31kHz
5-pin connector
Signal
Demodulator
Preamplifier
Sensor
cable
Sensor
19
Controller type
DT6110
DT6110/ECL2
Resolution static
0.01 % FSO
0.01 % FSO
Resolution dynamic
0.015 % FSO (1kHz)
0.015 % FSO (1kHz)
Bandwidth
1 kHz (-3dB)
1 kHz (-3dB)
Linearity
±0.2% FSO
±0.2% FSO
Max. sensitivity deviation
±0.1% FSO
±0.1% FSO
Long term stability
<0.05% FSO/month
<0.05% FSO/month
Synchronous operation
no
no
Insulator measurement
no
no
Temperature stability
200ppm
200ppm
Temperature range (operation)
+10 … +60°C
+10 … +60°C
Temperatur range (storage)
-10 … +75°C
-10 … +75°C
Supply
24VDC/55mA (9 ... 36V)
24VDC/55mA (9 ... 36V)
Output
0 … 10V (short-circuit-proof), optional: ±5V, 10 … 0V
0 … 10V (short-circuit-proof), optional: ±5V, 10 … 0V
Sensors
suitable for all sensors
suitable for all sensors
Sensor cable
1m
2m
FSO = Full Scale Output
12
5.5
76
Mounting holes
for M4 screws
1
9.
12
Ø
16.5
24
6
26.5
53
5.5
8.3
Accessories
20
capaNCDT
Sensor cable
Sensor and pre-amplifier electronics are connected using a special, double-shielded sensor
cable. Cable lengths of 2m, 3m or 4m are optionally available but require special tuning of the
pre-amplifier.
Sensor cable CCx,xC/90
8
3m
27
37
CC2,0C
Ø3.2
2m
CC2,0C/90
8.6
16.9
CC1,0C/90
13.1
1x straight / 1x 90° connector
CC1,0C
Ø4
Ø5.4
2x straight connectors
Ø6
Cable length
Standard 1m
Ø7
Ø9.5
Sensor cable CCx,xC
Connector type C: cable for sensors
CS005
/ CS022m/3m)
/ CS05 / CS08
Standard length
1m (optional
13.7
CC3,0C
CC3,0C/90
17.5
16
Sensor cable CCx,xC
Ø5.4
Ø6
Sensor cable CCx,xC/90
Ø4
8.6
16.9
8
Ø3.2
27
37
13.1
Ø7
Ø9.5
Ø6
Ø5.4
Standard length 1m (optional 2m/3m)
13.7
17.5
16
Ø5.4
Ø6
Connector type B: cable for sensors
CS1 / CS1HP / CS2 / CS3 / CS5 / CS10
Cable length
2x straight connectors
1x straight / 1x 90° connector
Standard 1m
CC1,0B
CC1,0B/90
2m
CC2,0B
CC2,0B/90
3m
CC3,0B
CC3,0B/90
Sensor cable CCx,xB
Sensor cable CCx,xB/90
Standard length 1m (optional 2m/3m)
27
30.5
20.5
Ø7
Ø3.2
27
37
Ø9.5
Ø7
Ø9.5
25
37
Sensor cable CCx,xB
Sensor cableØ7CCx,xB/90
Ø10
Standard length 1m (optional 2m/3m)
capaNCDT
30.5
20.5
Ø7
27
Ø3.2
Accessories
Ø9.5
Ø7
Ø9.5
25
MC2.5 Micrometer for sensor calibration, range 0 -27
2.5mm, Resolution 0.1µm. Suitable for sensors CS005 to CS2
37
37 0 - 25mm, adjustable offset (zero). Suitable for all sensors.
MC25D Digital micrometer for sensor calibration, range
SWH.0S.650.CTMSV Vacuum feed through
UHV Vacuum feed through
PC6200-3/4 Power-/trigger cable, 4 pin, 3m
Ø7
6110
6200
6500
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Ø10
SCAC3/4 Signal output cable, (necessary for multi channel applications), 4 pin, 3m
SCAC3/5 Signal output cable, analog, 5 pin, 3m
•
SC6000-1,0 Synchronization cable, 5 pin, 1m
CA5 Preamplifier cable 5 pin, 5m
PS2020 Power supply for DIN rail mounting; Input 230VAC (115VAC); Output 24VDC / 2.5 A; L/W/H 120x120x40mm
•
•
21
UHV/B Vacuum feed triax weldable (Art.-no. 0323346)
SWH Vacuum feed through (Art.-no. 0323050)
25
2
-9
-1
UHV/B Vacuum feed triax screwable (Art.-no. 0323370)
ø13.50h6
ø9.4
ø13.50h6
Max. leak rate 1x10e-9 mbar · l s-1, compatible withWS11
connector type B
Max. leak rate 1x10e-9 mbar · l s-1, compatible with connector type B
1.75
ø9.4
WS11
ø9.4
Weld seam
25
ø9.4
Weld seam
1.75
25
M9x0.5 M9x0.5
ø34 (flange
ø34standard
(flange standard
CF16) CF16)
6
-1
25
25
UHV/B Vacuum
13.5 feed triax with flange CF16 (Art.-no. 0323349)
13.5
ø9.4
1.75
Max. leak rate
1x10e
mbar
· l s , compatible
with connector
type B
UHV/B Vacuum
feed
triax
screwable
(Art.-no.
0323370)
Max. leak rate
1x10e feed
mbar · triax
l s , compatible
with connector
type B
UHV/B
Vacuum
with flange
CF16 (Art.-no.
0323349)
6
WS11
Max. leak rate 1x10e-9 mbar · l s-1, compatible with connector type B
ø13.50h6
WS11
-7
Max. leak rate 1x10e
mbar · l s-1, compatible with connector type B
max. 17
-7
ø9.4
9
9
ø13.50h6
25
1.75
Ø14
Ø8.8
Ø8.8
max. 17
2
Ø14
WS12
WS12
34
M10x0.75
M9x0.5 M9x0.5
UHV/B Vacuum feed triax weldable (Art.-no. 0323346)
M10x0.75
SWH Vacuum
feed through (Art.-no. 0323050)
M9x0.5 M9x0.5
34
Max. leak rate 1x10e-9 mbar · l s-1, compatible with connector type B
Max. leak rate 1x10e-9 mbar · l s-1, compatible with connector type B
SCA3/5 Signal output cable (Art.-no. 2902112)
SCA3/4 Signal output cable (Art.-no. 2902104)
Cable length ±1%
approx. 35.6
Ø8.9
Ø7
10
approx. 35.6
100
43.5
Cable length ±1%
100
CA5 Preamplifier cable (Art.-no. 2903180)
SC6000-1,0 Synchronization cable (Art.-no. 2903473)
Cable length ±1%
Cable length ±1%
11
CA5 Preamplifier cable (Art.-no. 2903180)
Cable length ±1%
10
Ø7
approx. 35.6
10
approx. 35.6
Ø8.9
Ø7
Ø7
Ø8.9
approx. 35.6
CA5 Preamplifier cable (Art.-no. 2903180)
approx. 35.6
Cable length ±1%
10
approx. 35.6
Ø7
Ø4.9 ±0.25 Ø4.9 ±0.25 Ø4.9 ±0.25
Ø7
Ø8.9
SC6000-1,0 Synchronization cable (Art.-no. 2903473)
Cable length ±1%
10
Ø8.9
Ø7
Ø8.9
Cable length ±1%
10
Ø4.3 ±0.25 Ø4.3 ±0.25
43.5
100
43.5
SC6000-1,0 Synchronization
cable (Art.-no. 2903473)
Ø8.9
150
10
approx. 35.6
Ø4.3 ±0.25
11
Ø5.5 ±0.3 Ø5.5 ±0.3
PC6200-3/4 Power-/trigger cable (Art.-no. 2901881)
Ø5.5 ±0.3
Ø11.5
Ø9
Ø9
Ø11.5
approx. 35.6
150
Cable length ±1%
Cable length ±1%
11
Ø9
10
Cable length ±1%
PC6200-3/4 Power-/trigger cable (Art.-no. 2901881)
Ø11.5
approx. 35.6
Ø4.3 ±0.25 Ø4.3 ±0.25 Ø4.3 ±0.25
PC6200-3/4 Power-/trigger cable (Art.-no. 2901881)
10
10
50
150
Cable length ±1%
SCA3/5 Signal output cable (Art.-no. 2902112)
Ø8.9
Ø7
Ø4.3 ±0.25 Ø4.3 ±0.25
approx. 35.6
Cable length ±1%
Ø4.3 ±0.25
Ø7
approx. 35.6
50
SCA3/5 Signal output cable (Art.-no. 2902112)
Ø8.9
Ø7
Ø7
10
10
Ø8.9
Cable length ±1%
50
Cable length ±1%
SCA3/4 Signal output cable (Art.-no. 2902104)
Ø7
Ø8.9
Ø8.9
SCA3/4 Signal output cable (Art.-no. 2902104)
Modifications reserved / Y9761319-E031064GKE
High performance sensors made by Micro-Epsilon
Sensors and systems for displacement
and position
Sensors and measurement devices for
non-contact temperature measurement
2D/3D profile sensors (laser scanner)
Optical micrometers, fibre
optic sensors and fibre optics
Colour recognition sensors, LED analyzers
and colour online spectrometer
Measurement and inspection systems
MICRO-EPSILON Headquarters
Koenigbacher Str. 15 ∙ 94496 Ortenburg / Germany
Tel. +49 (0) 8542 / 168-0 ∙ Fax +49 (0) 8542 / 168-90
[email protected] ∙ www.micro-epsilon.com
Micro-Epsilon UK Ltd.
No.1 Shorelines Building · Shore Road · Birkenhead · CH41 1AU
Phone +44 (0) 151 355 6070 · Fax +44 (0) 151 355 6075
[email protected] · www.micro-epsilon.co.uk