Agenda für die RecurDyn TechnologyTage 2014 5. November 2014 6. November 2014 - Leonardo Royal Hotel - - Leonardo Royal Hotel - 09:30 am – 10:00 am Registration 10:00 am – 11:30 am 10:00 am: Tanja-A. Lange, FunctionBay GmbH: “Welcome Speech” Room #1: Durability Analysis with the Combination of winLIFE and RecurDyn - Wolfgang Artner 10:10 am: Dipl.-Ing. Thomas Kelichhaus, FunctionBay GmbH: “Company and Product Strategy” 10:30 am: Dr. Juhwan Choi, FunctionBay Inc.: “New RecurDyn Contacts: Geo Surface and Geo Curve Contacts” 11:00 am: Dr. Martin Landwehr, Wincor International GmbH: Room #2: Flexible Bodies in RecurDyn (FullFlex, RFlex & RFI Generator) - Thomas Kelichhaus & Graham Sanborn Room #3: Contact Analysis in RecurDyn, incl. FullFlex Contacts) - Uwe Eiselt & Juhwan Choi Room #4: Solver Technology in RecurDyn - Timo Giese “RecurDyn as Simulationtool in the „Spitzencluster“ project: It’s OWL – InverSa“ 11:30 am – 11:45 am Coffee Break 11:30 am: BMW AG, M.Sc. Daniel Meckl: “Simulation of Press Dies for Large Presses using the Flexible Multibody Dynamics in RecurDyn” 11:45 am -12:30 pm Room #1: Multi-Body-Dynamics for ANSYS – powered by RecurDyn - Uwe Eiselt & Wolfgang Artner Room #2: eTemplate – Ms.Excel based Model Creation - Ivalyo Haralampiev Room #3: Optimization with RecurDyn/AutoDesign - Harald Weinbrenner Room #4: ThinkGroup – Discussion Time for Users and FunctionBay people - Thomas Kelichhaus, Juhwan Choi, Graham Sanborn 12:00 pm - 1:15 pm Lunch 1:15 pm: Professor Dr.-Ing. Günter Willmerding, Steinbeis Transferzentrum Verkehrstechnik.Simulation.Software & Wolfgang Artner, Awotec: “Fatigue Analysis of Dynamically Loaded Components Using RecurDyn and winLIFE” 2:00 pm: Prof. Dr.-Ing. Peter Gust, Lehrstuhl Konstruktion Bergische Universität Wuppertal: „The Use of RecurDyn in the Simulation of Human-Machine Interactions” 2:30 pm: Dr. Graham Sanborn, FunctionBay Inc.: “RecurDyn MFBD Development Direction: G-Model Concept” 12:30 pm – 1:30 pm Lunch 1:30 pm – 3:00 pm Room #1: Multi-Body-Dynamics for ANSYS - powered by RecurDyn – Harald Weibrenner & Wolfgang Artner Room #2: Flexible Bodies in RecurDyn (FullFlex, RFlex & RFI Generator) - Thomas Kelichhaus & Graham Sanborn Room #3: Fluid Simulation in Combination with RecurDyn and ParticleWorks - Uwe Eiselt Room #4: Contact Analysis in RecurDyn, incl.- FullFlex Contacts Timo Giese & Juhwan Choi 3:00 pm: Professor Domenique Knittel, Roll-to-Roll Research Group, University of Strasbourg (UdS), France: “Analysis of elastic web wrinkles in industrial plants using finite element modeling” 1 Agenda für die RecurDyn TechnologyTage 2014 3:30 pm – 4:00 pm Coffee Break 3:00 pm – 3:15 Coffee Break 3:15 pm – 4:00 4:00 pm: Cem Altun, FIGES: “Flexible Multibody Modelling in RecurDyn based on Component Mode Synthesis (CMS) Method using an interface with ANSYS and Simulink Coupling” Room #1: Multi-Body-Dynamics for ANSYS - powered by RecurDyn - Uwe Eiselt & Wolfgang Artner Room #2: eTemplate: Ms.Excel based Model Creation - Ivalyo Haralampiev 4:30 pm: Professor Dr. Frank Faßbender, FunctionSim: „Simulation with RecurDyn/HMT (HighMobilityTrackedVehicles)“ 5:00 pm: Dr. Hakan Oka, CAE Solutions: “Multi Body Dynamics Modeling of a Semitrailer with Flexible Suspension under Various Road Conditions” Room #3: RecurDyn/MachineTool for the Simulation MachineTools in RecurDyn - Timo Giese Room #4: ThinkGroup – Discussion Time for Users and FunctionBay people - Thomas Kelichhaus, Juhwan Choi, Graham Sanborn or Individual Discussions. 5:30 pm: Dipl.-Ing. (FH) Nathalie Mattwich, Cadfem GmbH: “CADFEM - Because Simulation is more than Software” 5:45 pm: Dipl.-Ing. Uwe Eiselt und Dipl.-Ing. Timo Giese: “New Features Release V8R3 and New Tool: Multi-BodyDynamics for ANSYS – powered by RecurDyn” 6:30 pm End of First Day 4:00 pm end of RecurDyn TechnologyDays Evening Event: 7:30 pm: „Bavarian Evening for Analysts” Meeting point is at the Reception of the Leonardo Royal Hotel FunctionBay GmbH @ Leonardo Royal Hotel, München 2