Tips to pass your Dell EMC DES-1721 exam Pass your DES-1721 exam successfully https://www.passcert.com/DES-1721.html Passcert Dell EMC SC Series DES-1721 dumps High quality, 100% Valid for One Year Free Update, Get pass, Real exam questions latest version to study Why choose us? 100% Money Back Guarantee, If Fail, Full Refund 25% discount to save your cost, coupon code : 25off DES-1721 practice questions 1. You are installing a new SC9000. Which procedure should be used to install and configure the system? A. Connect through the iDRAC port B. Connect through a null modem cable to the serial port C. Connect through the Dell Storage Manager Client D. Connect through the supplied proprietary serial cable to the serial port Answer: D DES-1721 practice questions 2. An administrator wants to configure an SC Series array to use Virtual Port Mode. What is a requirement to accomplish this task? A. NPIV must be disabled on Fibre Channel switches B. I/O Controller cards must use a single-ID firmware version C. Fibre Channel switches must use a switched fabric topology D. Activation license must be purchased and installed Answer: D DES-1721 practice questions 3. What are the possible methods to upgrade the firmware on a Brocade switch? A. FTP, SFTP, and Web Tools B. USB, FTP, and SFTP C. USB, FTP, and Web Tools D. USB, SFTP, and Web Tools Answer: C DES-1721 practice questions 4. A customer is running the Dell Storage Manager (DSM) Suite as a software stack on Microsoft Windows. To reduce the Microsoft licensing costs, the customer wants to switch to the DSM Virtual Appliance. Which recommended deployment should the customer use? A. Configure as a Primary Data Collector B. Configure as a Remote Data Collector C. Migrate the DSM database manually D. Migrate from the existing Data Collector Answer: D DES-1721 practice questions 5. Which operating system runs the Dell Storage Manager (DSM) as a virtual appliance? A. CentOS 7 B. Windows Server 2012 R2 C. VMware D. Windows Server 2010 R2 Answer: C DES-1721 practice questions 6. A customer is concerned they are over utilizing their 7K drives. Where can information about the real time I/O usage of individual drives be viewed? A. Hardware > Disks > [disk folder] > [disk number] B. Charting > Disks > [disk folder] IO Charts C. Charting > Disks > [disk folder] > [disk number] D. Hardware > Disks > [disk folder] Answer: A DES-1721 practice questions 7. What is the maximum number of disks that can be supported by an SC4020 running SCOS 6.6.4 or later? A. 120 B. 128 C. 192 D. 196 Answer: A DES-1721 practice questions 8. A customer wants to add an iSCSI path to a Microsoft Windows Server 2012 R1. The server has an existing Fibre Channel path to an SC7020 array for load balancing and high availability. Which Windows MPIO policy should be configured to achieve the customer’s requirement? A. Fail Over Only B. Weighted Paths C. Round Robin with Subset D. Round Robin Answer: D
© Copyright 2024