POSITION TITLE:
MFC Apprentice Trimmer Maker
REPORTS TO:
MFC Die Room Supervisor
LOCATION:
Meadville Plant
SHIFT:
2
nd
POSITION SUMMARY and KEY OBJECTIVES:
The Apprentice Trimmer Maker position is a four year long on-the-job training program that will result in a
FIA certified Impression Trimmer Maker position. This position will support our forging operation by
assembling dies and die sets, as well as preparing any tooling necessary for secondary operations. This
support function will also include some lathe operation and surface grinding of punches, trim blades and
seats (as well as drilling and tapping as necessary). Applicants with prior Apprentice Trimmer Maker
experience may be granted credit for their previous experience.
KEY RESPONSIBILITIES and JOB DUTIES:






Assembling of Die Sets
Assembling of Dies
Lathe Operation
Surface Grinding
Participate in continuous improvement ideas and help support on-going projects as required
Other duties as assigned
QUALIFICATION and EDUCATION:








High school diploma or equivalent required
Trade school preferred
Manual machining background a plus
Ability to read machinery blueprints and drawings required
Ability to use micrometers a must
Mechanically inclined
A concern for safety is a must
An excellent attendance record is a must
Physical Demands
Reaching: Frequently required when assembling dies and die sets.
Bending: Frequently required in the essential functions of the job.
Hand usage: Frequently required for reaching and grasping.
Lifting: Up to 25 lbs. frequently.
Walking: Continuously walking and standing up 6-8 hours per day.
Environment: Mostly indoors, dirty, working on concrete flooring. Cold in the winter and hot in the summer.
Hours: A minimum of 8 hours per day, 5 to 6 days a week depending on production demand.
Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as
determined by the needs of the organization.