1. business and industrial
2. green solutions

TABLE OF CONTENTS
Sterilization Wraps...................................................................................3-8
Tray Liners..................................................................................................9
Stericlin® Light Blue Tint Rolls - Flat........................................................10
Stericlin® Gusseted Rolls.........................................................................11
Stericlin® Light Blue Tint Pouches - Flat.............................................12-13
Stericlin® Light Blue Tint Pouches - Gusseted.........................................14
Stericlin® Blue Line Laminated Non-Woven Pouches and Rolls.........15-16
Stericlin® Tyvek Pouches and Rolls.........................................................17
Seal Seam Integrity Test Kit......................................................................18
Dust Cover Bags……................................................................................19
Stericlin® Indicator Strips..........................................................................20
Stericlin® Bowie & Dick Testpack, single use...........................................21
Adhesive Tapes – with and without indicator….........................................22
Sterilope and Guardian Steam Paper Sterilization Bags......................23-24
Polystar and PMS Heat Sealers and PMS Roll Holder and cutter…....25-26
Belintra Storage and Logistic Systems….............................................27-38
Intrarack…………......................................................................................28
Uflex III Modular Racking System ............................................................29
Medicart …………….................................................................................30
Modular Transport Trolleys and Ward Trolleys.........................................31
Stainless Steel Transport Baskets and Shelves………....….....................32
Polycarbonate Baskets and Dividers….....................................................33
Label Holders and Steri-ID Tag.................................................................34
Stainless Steel Instrument Baskets ……………...................................35-37
Height Adjustable Packing tables..............................................................38
Renosem Plasma Sterilizers................................................................39-40
Terms and Conditions..........................................................................41-42
STERILIZATION WRAPS
Med-Con Sterile Barriers Systems are proudly finished in Australia from Ahlstrom Fabrics.
Ahlstrom is constantly improving components and developing manufacturing techniques, providing the
medical community with the most advanced fabrics. Controlled non-woven construction provides
unsurpassed fabric uniformity. The combination of different fibres, manufacturing processes and
sequential wrapping techniques create a bacterial barrier to prevent the migration of micro-organisms.
Med-Con Sterile Barrier Systems have excellent fluid repellency and provide a barrier against particles.
Our nonwoven fabrics not only repel water and blood but also low tension liquids. Our product range is
available in several different qualities, with the right strength for every application.
The right strength for each application.
Med-Con wraps reduce the risk of puncturing or tearing. They are available in a range of sizes and
resistances that cover every application.
The right softness for easier wrapping.
Med-Con wraps are soft and smooth and non-slip, allowing fast wrapping, therefore saving time and
improving efficiency. They wrap perfectly around a wide variety of items.
The right permeability during Sterilization.. Med-Con wraps are more compatible with the majority of sterilizers. They deliver optimal integrity
during all phases of the steam sterilization process - pre-vacuum, air removal, steam penetration and
drying cycle. Fully permeable to ETO, Med-Con wraps do not impede rapid aeration of contents during
desorption time. They allow for alternative sterilization with gamma radiation and E-beam processes for
future commercial sterilization processing. Plasma Wrap is the newest addition to our fabric range and
is designed specifically for gas plasma sterilization.
The right barrier during storage.
Med-Con fabrics ensure sterility of package contents until opened. There is no more effective fluid
barrier. Our new range provides superior fluid repellency from simple water to the most demanding
low-tension surface liquids. Liquid repellency helps avoid contamination by preventing bacteria passing
through a wet area. There are no more advanced particles barriers. The manufacturing process,
sequential wrapping method and accurate product selection, create a tortuous path to prevent the
migration of micro-organisms.
The right visual.
The even uniformity allows for the immediate detection of pinholes and other eventualities that
compromise the packaging integrity and sterility of medical devices.
The lowest lint generation in their class.
Med-Con Medical wraps resist potential damage from scuffing and rubbing, therefore providing the
lowest lint generation in their class.
Memory Free.
When packages wrapped in Med-Con non-woven fabrics are opened they stay open, without closing
back along crease lines. Med-Con wraps enable staff to remove the pack contents with a reduced risk
of contamination. The lack of memory reduces any potential for spring back of the wraps.
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
3 of 42
ROBUST - EXTRA HEAVY DUTY BARRIER
Sheet form wraps are made from blended cellulose non-woven barrier fabric.
Complies with European and Australian Standards
AS:1079.5 - 2003
AS:4187 – 2003
ISO 11607-1
EN: 868
The heavy weight wrap is intended for use in large sized to extra heavy weight bundles.
orthopaedic or cardiac bundles are best wrapped in Robust.
Larger
Bundles can be presented in Robust wrap as an inner or outer wrap. Sequential wrapping remains the
clinical choice of each Health Care Facility. If the individual Health Care facility chooses to single wrap
then this heavy-duty weight wrap will meet the criteria for this purpose as defined by AS 4187-2003.
AS 1079.5 2003 Packaging for Items - Sterile, for Patient Care Part 5: non-reusable, non-woven
wrapping materials for goods undergoing Sterilization in health care facilities.
According to this standard, blended non woven wrapping materials for goods undergoing sterilization in
health care facilities must conform to a minimum of 60 minutes minimum time for fluid penetration
according to the official mason jar test (INDA Standard Test Method IST 80.5-92). All grades exceed
the minimum requirements of AS 1079.5-2003.
ARTG No. 135954
Sterilization Wraps – Robust
Heavy to extra heavy weight, drapable, repellent, cost effective - designed for medium -large
bundles and linen packs as both a inner and outer wrap
Code
Description
Colour
Ctn Qty
567012
Robust wrap 90cm x 90cm
Blue
150
567006
Robust wrap 100cm x 100cm
Blue
100
567009
Robust wrap 100cm x 140cm
Blue
100
567013
Robust wrap 120cm x 120cm
Blue
100
567007
Robust wrap 120cm x 140cm
Blue
100
567014
Robust wrap 140cm x 180cm
Blue
50
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
4 of 42
ENDURANCE - HEAVY DUTY BARRIER
Sheet form wraps are made from blended cellulose non-woven barrier fabric.
Complies with European and Australian Standards.
AS:1079.5 - 2003
AS:4187 – 2003
ISO 11607-1
EN: 868
This heavy weight wrap is intended for use for large heavy weight bundles. Heavy weight and bulky
packs are ideally suited for Endurance wrap. These bundles can be presented in Endurance wrap as
an inner or outer wrap.
Sequential wrapping remains the clinical choice of each Health Care facility the benefits of colour
choices in this heavy weight product range allow for sequential wrapping to offer practical advantages
during aseptic presentation. If the individual Health Care Facility chooses to single wrap then the heavy
weight wraps such as Endurance will meet the criteria for this purpose as defined by AS 4187-2003.
AS 1079.5 2003 Packaging for Items - Sterile, for Patient Care Part 5: non-reusable, non-woven
wrapping materials for goods undergoing Sterilization in health care facilities.
According to this standard, blended non woven wrapping materials for goods undergoing sterilization in
health care facilities must conform to a minimum of 60 minutes minimum time for fluid penetration
according to the official mason jar test (INDA Standard Test Method IST 80.5-92). All grades exceed
the minimum requirements of AS 1079.5-2003.
ARTG No. 135954
Sterilization Wraps – Endurance
Medium to Heavy weight, Drapable, repellent and cost effective - designed for medium -large
bundles and linen packs as both an inner and outer Wrap
Code
Description
Colour
Ctn Qty
568001
Endurance wrap 50cm x 50cm
Green
500
568005
Endurance wrap 50cm x 100cm
Green
500
568008
Endurance wrap 60cm x 60cm
Green
500
568009
Endurance wrap 75cm x 75cm
Green
300
568013
Endurance wrap 90cm x 90cm
Green
250
568007
Endurance wrap 100cm x 75cm
Green
300
568002
Endurance wrap 100cm x 100cm
Green
250
568000
Endurance wrap 100cm x 150cm
Green
150
568014
Endurance wrap 120cm x 120cm
Green
125
568031
Endurance wrap 130cm x 150cm
Green
100
568030
Endurance wrap 140cm x 100cm
Green
150
568018
Endurance wrap 140cm x 180cm
Green
75
568011
Endurance wrap 150cm x 180cm
Green
75
568003
Endurance wrap 50cm x 100m roll
Green
2
568004
Endurance wrap 1000cm x 100m roll
Green
1
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
5 of 42
PERFORMANCE - MEDIUM DUTY BARRIER
Sheet form wraps are made from blended cellulose non-woven barrier fabric.
Complies with European and Australian Standards.
AS:1079.5 - 2003
AS:4187 – 2003
ISO 11607-1
EN: 868
This medium weight wrap is intended for use in medium weight bundles. Medium weight and bulky
packs are ideally suited for Performance wrap. These bundles can be presented in Performance wrap
as an inner or outer wrap.
Sequential wrapping remains the clinical choice of each Health Care facility. The benefits of colour
choices in this medium weight product range allow for sequential wrapping to offer practical advantages
during aseptic presentation. If the individual Health Care Facility chooses to single wrap then the
medium weight wraps such as Performance will meet the criteria for this purpose as defined by AS
4187-2003.
AS 1079.5 2003 Packaging for Items - Sterile, for Patient Care Part 5: non-reusable, non-woven
wrapping materials for goods undergoing Sterilization in health care facilities.
According to this standard, blended non woven wrapping materials for goods undergoing sterilization in
health care facilities must conform to a minimum of 60 minutes minimum time for fluid penetration
according to the official mason jar test (INDA Standard Test Method IST 80.5-92). All grades exceed
the minimum requirements of AS 1079.5-2003.
ARTG No. 135954
Sterilization Wraps – Performance
Drapable, repellent, cost effective, designed for Medium bundles and linen packs as both a inner
and outer Wrap
Code
Description
Colour
Ctn Qty
561001
Performance wrap 50cm x 50cm
Blue
500
561005
Performance wrap 50cm x 100cm
Blue
500
561003
Performance wrap 50cm x 100 m roll
Blue
2
561008
Performance wrap 60cm x 60cm
Blue
500
561009
Performance wrap 75cm x 75cm
Blue
300
561013
Performance wrap 90cm x 90cm
Blue
250
561007
Performance wrap 100cm x 75cm
Blue
300
561002
Performance wrap 100cm x 100cm
Blue
250
561000
Performance wrap 100cm x 150cm
Blue
150
561004
Performance wrap 100cm x 100m roll
Blue
1
561014
Performance wrap 120cm x 120cm
Blue
125
561031
Performance wrap 130cm x 150cm
Blue
100
561030
Performance wrap 140cm x 100cm
Blue
150
561018
Performance wrap 140cm x 180cm
Blue
75
561011
Performance wrap 150cm x 180cm
Blue
75
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
6 of 42
ECONOMY AND ULTRA WRAP - STANDARD DUTY BARRIER
Sheet form wraps are made from blended cellulose non-woven barrier fabric.
Complies with European and Australian Standards.
AS:1079.5 - 2003
AS:4187 – 2003
ISO 11607-1
EN: 868
The standard weight wrap is intended for use in small to medium sized bundles, or general-purpose
use. These bundles can be presented in Economy or Ultra wrap as an inner or outer wrap.
Sequential wrapping remains the clinical choice of each Health Care facility. If the individual health
Care facility chooses to single wrap then the standard weight wraps will meet the criteria for this
purpose as defined by AS 4187-2003.
AS 1079.5 2003 Packaging for Items - Sterile, for Patient Care Part 5: non-reusable, non woven
wrapping materials for goods undergoing Sterilization in health care facilities.
According to this standard, blended non woven wrapping materials for goods undergoing sterilization in
health care facilities must conform to a minimum of 60 minutes minimum time for fluid penetration
according to the official mason jar test (INDA Standard Test Method IST 80.5-92). All grades exceed
the minimum requirements of AS 1079.5-2003.
ARTG No. 135954
Sterilization Wraps – Economy
Standard weight, repellent, cost effective, designed for small items and linen packs as both a inner
and outer Wrap
Code
Description
Colour
Ctn Qty
569025
Economy Wrap 40cm x 40cm
Blue
1000
569000
Economy Wrap 50cm x 50cm
Blue
1000
569001
Economy Wrap 60cm x 60cm
Blue
500
569003
Economy Wrap 75cm x 75cm
Blue
300
569005
Economy Wrap 80cm x 80cm
Blue
300
569007
Economy Wrap 90cm x 90cm
Blue
250
569010
Economy Wrap 100cm x 100cm
Blue
250
569012
Economy Wrap 120cm x 120cm
Blue
125
569014
Economy Wrap 100cm x 140cm
Blue
150
569015
Economy Wrap 130cm x 150cm
Blue
100
569017
Economy Wrap 140cm x 140cm
Blue
75
569018
Economy Wrap 140cm x 180cm
Blue
75
569019
Economy Wrap 120cm x 140cm
Blue
100
569021
Economy Wrap 100cm x 100cm roll
Blue
1
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
7 of 42
ECONOMY AND ULTRA WRAP - STANDARD WEIGHT
ARTG No. 135954
Sterilization Wraps - Ultra Wrap
Standard weight, repellent, cost effective, designed for small items and linen packs as both a inner
and outer Wrap
Code
Description
Colour
Ctn Qty
562001
Ultra Wrap 50cm x 50cm
Green
500
562008
Ultra Wrap 60cm x 60cm
Green
500
562009
Ultra Wrap 75cm x 75cm
Green
300
562013
Ultra Wrap 90cm x 90cm
Green
250
562019
Ultra Wrap 60cm x 100m roll
Green
1
562002
Ultra Wrap 100cm x 100cm
Green
250
562000
Ultra Wrap 100cm x 150cm
Green
150
562004
Ultra Wrap 100cm x 100m
Green
1
562014
Ultra Wrap 120cm x 120cm
Green
125
562016
Ultra Wrap 120cm x 150cm
Green
125
562011
Ultra Wrap 150cm x 180cm
Green
75
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
8 of 42
TRAY LINERS
Functions and Advantages of a Tray Liner
•
Tray liners by Med-Con are specifically designed to provide a soft, low linting, highly absorbent
fabric that absorbs seven times its own weight in water. This is essential in assisting with wicking
excessive moisture from trays, instruments and bowl sets.
•
Low in Lint - all high quality tray liners provide protection from fabric that generates lint. Modern
non-woven fabrics have replaced products in theatres, which have the potential to produce lint such
as paper and cotton.
•
Less labour intensive - reduction in costs associated with maintenance and laundering of linen.
•
Multiple applications - prevents tearing of wraps from abrasion between the tray corners and
storage shelving when used between the wrap and tray. Reduces wear and tear on instruments
during processing and transport increasing the useful life of instruments and reducing risk of
potential for wet load.
•
Can be used in Steam and ETO sterilization
Tray Liners
Code
515020
515021
515022
515024
515023
515031
515032
515033
515034
Description
Tray liners 10cm x 27cm
Tray liners 24cm x 27cm
Tray liners 24cm x 37cm
Tray liner 27cm x 30cm
Tray liners 27cm x 50cm
Tray liner 27cm x 40cm
Tray liner 27cm x 60cm
Tray liner 50cm x 60cm
Tray liner 75cm x 60cm
Colour
White
White
White
White
White
White
White
White
White
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
Ctn Qty
500
500
500
400
500
200
200
200
200
9 of 42
STERICLIN® LIGHT BLUE TINT ROLLS - FLAT
STERICLIN® FLAT ROLLS
ISO 11607- 2 ; EN 868-3 and -5 for laminates
Construction: 70 g/m² sterilization paper conforming to EN 868-3 and DIN 58953, parts 2 and 6.
• light blue tinted transparent film Polyester / Polypropylene (PETP/PP).
• heat sealable, sterilization resistant colours, water based.
• non-toxic STEAM, E.T.O.-GAS and FORMALDEHYDE indicators at intervals of 135 mm
Special features
i/d of core 76 mm, inside core QC-label with batch-Number etc.
Printing details: Indicators, description / size, article Number and batch Number after the backslash,
manufacturer and brand name are printed onto the paper, covered by the seal.
Method of sterilization: Steam, E.T.O.-gas, formaldehyde - not for gamma-rays or plasmaSterilization!
Sealing: For see-through reels commercial continuous sealing devices are most suitable. The sealing
temperature should be in the range of 180°-200°C.
Sizes: Flat reels are available in 9 standard widths, length 200m.
Method of use
STERICLIN® see-through reels should be cut off, according to the item to be packed. Make a bottom
seal right at the end of the tube. Fill the pouch and seal at the top end leaving a peel tab of 15 to 20mm.
A free space of at least 3 cm from the seal area should be maintained in order to avoid stress on the
seal. To remove content peel apart the film and the paper.
STERICLIN® reels are in accordance with DIN EN 868-5. VP STERICLIN® is certified to EN ISO
9001. The CE-kitemark is printed onto the outer carton.
ARTG No. 135955
Reels – printed, with Indicator
Light Blue Tint Rolls – Flat
Code
Description
800301
50mm x 200 metres
800302
75mm x 200 metres
800303
100mm x 200 metres
800304
150mm x 200 metres
800305
200mm x 200 metres
800306
250mm x 200 metres
800307
300mm x 200 metres
800308
380mm x 200 metres
800409
420mm x 200metres
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
Ctn Qty
1 roll
1 roll
1 roll
1 roll
1 roll
1 roll
1 roll
1 roll
1 roll
10 of 42
STERICLIN® GUSSETED ROLLS
STERICLIN® GUSSETED ROLLS
ISO 11607- 2 ; EN 868-3 and -5 for laminates
Construction: 70 g/m² sterilization paper conforming to EN 868-3 and DIN 58953, parts 2 and 6.
• light blue tinted transparent film Polyester / Polypropylene (PETP/PP).
• heat sealable, sterilization resistant colours, water based.
• non-toxic STEAM, E.T.O.-GAS and FORMALDEHYDE indicators at intervals of 135 mm
Special features
i/d of core 76 mm
inside core QC-label with batch-Number etc.
Printing details: Indicators, description / size, article Number and batch Number after the backslash,
manufacturer and brand name are printed onto the paper, covered by the seal.
Method of sterilization: Steam, E.T.O.-gas, formaldehyde - not for gamma-rays or plasmaSterilization!
Sealing: For see-through reels commercial continuous sealing devices are most suitable. The sealing
temperature should be in the range of 180°-200°C.
Sizes: Gusseted reels are available in 7 standard widths, length 100m.
Method of use
STERICLIN® see-through reels should be cut off, according to the item to be packed. Make a bottom
seal right at the end of the tube. Fill the pouch and seal at the top end leaving a peel tab of 15 to 20mm.
A free space of at least 3 cm from the seal area should be maintained in order to avoid stress on the
seal. To remove content peel apart the film and the paper.
STERICLIN® reels are in accordance with DIN EN 868-5. VP STERICLIN® is certified to EN ISO
9001. The CE-kitemark is printed onto the outer carton.
ARTG No. 135955
Light Blue Tint Rolls – Gusseted
Code
Width x Length x Gusset Height
800402
75mm x 100 metres x 25mm
800403
100mm x 100 metres x 50mm
800404
150mm x 100 metres x 50mm
800405
200mm x 100 metres x 50mm
800406
250mm x 100 metres x 65mm
800407
300mm x 100 metres x 65mm
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
Ctn Qty
1 roll
1 roll
1 roll
1 roll
1 roll
1 roll
11 of 42
STERICLIN® LIGHT BLUE TINT POUCHES - FLAT
SEE-THROUGH POUCHES
ISO 11607- 2 ; EN 868-3 and -5 for laminates
Product Specifications
• 70 g/m² sterilization paper conforming to EN 868-3 and DIN 58953, parts 2 and 6.
• heat sealable, sterilization resistant colours, solvent free.
• Light blue tinted transparent film Polyester / Polypropylene (PETP/PP).
Product design
• Non-toxic steam-, E.T.O.-gas- and Formaldehyde- indicators are placed outside the filling area –
• no danger of migration of indicator ink onto sterile goods!
• Sealed edges - no dust sedimentation between film and paper!
• Chevron seal for easy peeling.
• Thumb-cut-out for easy filling and easy peeling.
Sealing
For see-through pouches and reels commercial continuous sealing devices are most suitable. The
sealing temperature should be in the range of 180 - 200°C.
Printing details:
• Description / size
• Article Number and Batch Number after the backslash
• Manufacturer and brand name
Method of sterilization
Steam, E.T.O.-gas, formaldehyde - not for gamma-rays or plasma-Sterilization!
Method of use
STERICLIN® see-through pouches should be filled from below, sharp or pointed items should be
protected in order to avoid damaging the pouch. A free space of at least 3 cm from the seal area should
be maintained in order to avoid stress on the seal. The pouches should be placed in a container (e.g.
sterilization basket) so that they support one another. A sterilization basket is optimally filled when the
pouches stand upright and you can push your hand comfortably between the pouches. To remove
content peel apart the film and the paper.
STERICLIN® pouches are in accordance with DIN EN 868-5.
VP STERICLIN® is certified to EN ISO 9001. The CE-kitemark is printed onto the outer carton.
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
12 of 42
STERICLIN® LIGHT BLUE TINT POUCHES FLAT cont’d…
ARTG No. 135955
Light Blue Tint Pouches – Flat
Code
Description
802495
55mm x 200mm
801933
75mm x 150mm
801956
75mm x 200mm
801901
75mm x 250mm
801207
75mm x 300mm
801921
100mm x 150 mm
801922
100mm x 200mm
801902
100mm x 250mm
801939
100mm x 300mm
801941
100mm x 360mm
801955
100mm x 400mm
801944
100mm x 520mm
801940
150mm x 200mm
801942
150mm x 270mm
801943
150mm x 300mm
802497
150mm x 380mm
803960
200mm x 610mm (scope packs)
801929
200mm x 400mm
801904
220mm x 300mm
803964
220mm x 420mm (scope packs)
801945
250mm x 400mm
801930
250mm x 480mm
801928
300mm x 570mm
801905
320mm x 500mm
801957
360mm x 580mm
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
Ctn Qty
2000
2000
2000
2000
2000
2000
2000
2000
2000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
500
500
500
500
13 of 42
STERICLIN® LIGHT BLUE TINT POUCHES - GUSSETED
STERICLIN® GUSSETED POUCHES
ISO 11607- 2 ; EN 868-3 and -5 for laminates
Construction
70 g/m² sterilization paper conforming to EN 868-3 and DIN 58953, parts 2 and 6.
• light blue tinted transparent film Polyester / Polypropylene (PETP/PP).
• heat sealable, sterilization resistant colours, water based.
• non-toxic STEAM, E.T.O.-GAS and FORMALDEHYDE indicators at intervals of 135 mm
Special features
i/d of core 76 mm
inside core QC-label with batch number etc.
Printing details: Indicators, description / size, article number and batch number after the backslash,
manufacturer and brand name are printed onto the paper, covered by the seal.
Method of sterilization: Steam, E.T.O.-gas, formaldehyde - not for gamma-rays or plasmaSterilization!
Sealing: For see-through reels commercial continuous sealing devices are most suitable. The sealing
temperature should be in the range of 180°-200°C.
Sizes: Flat reels are available in 10 standard widths, length of 200m or 100m, gusseted reels are
available in 7 standard widths, length 100m.
Method of use: STERICLIN® see-through reels should be cut off, according to the item to be packed.
Make a bottom seal right at the end of the tube. Fill the pouch and seal at the top end leaving a peel tab
of 15 to 20mm. A free space of at least 3 cm from the seal area should be maintained in order to avoid
stress on the seal. To remove content peel apart the film and the paper.
STERICLIN® reels are in accordance with DIN EN 868-5. VP STERICLIN® is certified to EN ISO
9001. The CE-kitemark is printed onto the outer carton.
ARTG No. 135955
Light Blue Tint Pouches – Gusseted
Code
Width x Length x Gusset Height
801931
300mm x 610mm x 65mm
801959
410mm x 610mm x 65mm
801950
150mm x 400mm x 50mm
801949
100mm x 300mm x 50mm
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
Ctn Qty
500
500
1000
2000
14 of 42
STERICLIN® BLUE LINE SEE THROUGH LAMINATED
NON-WOVEN POUCHES AND ROLLS
The pouches specialized for heavy weight goods
STERICLIN® Blue Line see-through non-woven pouches and reels are the packaging solution for
heavy, bulky and over length goods like metal bowls and retractors. The pouches are manufactured
from 60-g/m2 strong non-woven subsequently sealed on a compound film. Three indicators for steam,
EO- and formaldehyde-sterilization are printed on, of course apart the filling area.
The Blue Line combines all the advantages of the paper-film-see-through-pouch with the advantages of
non-woven material. E.g. because of the increased softness of the non-woven material the pouches are
much easier and faster filled than pouches made of paper and film.
Instructions for use:
STERICLIN® Blue Line see-through non-woven pouches were designed tor stand much higher
stresses than normal pouches. Nevertheless it is necessary to follow some essential rules by using this
packaging material.
Filling:
STERICLIN® Blue Line see-through pouches should be filled only up to three quarter of their overall
space. Sharp or pointed items should be protected separately in order to avoid damage to the pouch.
An empty space of at least 5 cm from the seal area should be maintained in order to avoid stress on the
seal. Avoid any kind of folding - this potentially weakens the laminate material!
Bowl type medical devices should be packed with the hollow side to the non-woven side of the pouch in
order to ensure the best possible steam penetration
Sealing:
For see-through pouches commonly available continuous sealing devices are most suitable. The
sealing temperature should be in the range of 180° - 190°C.
Place inside the sterilization basket:
Smaller packs should be placed in a container (e.g. sterilization basket) so that they support one
another. Place the pouches film-to-film and non-woven to non-woven. Larger packs must be laid with
the non-woven on the downside. This eases steam penetration and drying. Always take heed of the
Sterilizers manufacturers instructions for use, correspondingly use validated configurations.
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
15 of 42
STERICLIN® BLUE LINE -SEE THROUGH LAMINATED
NON-WOVEN POUCHES AND ROLLS cont’d…
After sterilization:
Check the change of colour of the indicator after the sterilization process and look for any kind of
damage on the package. If the packs are still wet 30 minutes after the sterilization process they are not
storable and must be newly packed.
Open:
To maintain an easy opening of the pouch with a heavy load there are specially marked and shaped
seals on both edges of the pouch. Lay down the pouch for the opening procedure on a table, open the
sealed edges – these prevent dust sedimentation – and peel apart the film and the non-woven.
Storage:
Store the pouches away from dampness, soiling, vermin, mechanical strains, extreme temperatures
and ultraviolet rays. Store separately from un-sterile Goods. Refer to Australian Standards and DIN
58953 part 7 and other norms for storage conditions.
ARTG No. 135955
Code
801591
801593
801595
801980
801981
801620
801642
Description
Blue Line see through non-woven pouch, 27 x 36 cm
Blue Line see through non-woven pouch, 32 x 45 cm
Blue Line see through non-woven pouch, 40 x 52 cm
Blue Line see through non-woven pouch, 50 x 60 cm
Blue Line see through non-woven pouch, 57 x 72 cm
Blue Line see through non-woven rolls, 20cm x 100 metres
Blue Line see through non-woven rolls, 42cm x 100 metres
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
Ctn Qty
500
500
250
250
250
1 roll
1 roll
16 of 42
STERICLIN® TYVEK POUCHES AND ROLLS
®
POUCHES and Rolls made of TYVEK and PETP/PE
ISO 11607- 2; EN 868-10 and -5 for laminates; CE mark
Method of Sterilization:
• H2O2-plasma-low-temperature Sterilization; Pouches are printed with Plasma-Indicator.
• ETO-Gas, Formaldehyde and γ-rays-Sterilization
not for steam Sterilization !
Advantages of TYVEK® (registered trademark of DuPont):
• effective barrier against bacteria
• extremely tough, puncture and tear resistant
• easy and clean peeling without linting
• low absorption, quick de-absorption of EtO gas
Construction:
• TYVEK® 1073 B with water resistant coating
• Polyester/Polyethylene-compound film 12/50 µ
• Printed with Plasma-Indicator, colour change from Blue to Red
Sealing:
• 120° - 130°C
ARTG No. 135955
Codes
801972
801977
802498
801974
801976
801961
801962
801963
801964
801965
801966
801967
Description
75mm x 200mm pouches
100mm x 270mm pouches
150mm x 300mm pouches
200mm x 400mm pouches
250mm x 480mm pouches
75 mm x 100 metres
100mm x 100 metres
150mm x 100 metres
200mm x 100 metres
250mm x 100 metres
300mm x 100 metres
380mm x 100 metres
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
Ctn Qty
1000
500
500
500
500
1 Roll
1 Roll
1 Roll
1 Roll
1 Roll
1 Roll
1 Roll
17 of 42
SEAM SEAL INTEGRITY TEST KIT
Description:
The seal seam, which is a daily occurrence on your heat sealer, has to meet several requirements:
EN 868-5 requires a consistent seal seam which has to be a minimum strength of 1.5 Newton per 15
mm seal seam - before and after sterilization.
ISO 11607-1 goes on further: This standard requires a validation of the sealing and packing process.
Several tests regarding see-through packaging materials have to be done. Among these, has the user
to prove the completeness and integrity of the seal seam after sterilisation, transport and storage.
With the seal seam integrity test from stericlin® you get a simple tool to check these requirements.
Daily checking of the seal seams produced by your heat sealer is quite simply by means of a specially
designated testing solution.
With the seal seam test from stericlin® it is possible to cover a large part of the testing required for the
validation of your sealing- and packing process according to ISO 11607.
Application:
1. Use the pipette to take some testing solution from the bottle.
2. Sprinkle the seal seam between paper and film completely with the fluid (see picture).
The pipette should not touch the seal seam to prevent mechanical damage to the seal.
3. Using the stop watch wait 20 seconds after the fluid has been applied then check the
seal seam visually. The fluid must not penetrate the seal seam. Note: a longer contact time
than 20 seconds will falsify the result!
4. Let the samples dry and document the result of the test on the documentation sheet.
Clean the pipettes after use with water and let dry completely.
ARTG No. 136968
Code
804650
Description
Seal Seam Integrity Test Kit – Soln, droppers and beaker.
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
Qty
1
18 of 42
DUST COVER BAGS
Description:
Dust covers are made of transparent Polyethylene-film. Manufactured from low-density polyethylene
materials to protect sterile packaging from contamination during transport and storage.
Sterile packs must be cool and dry before packed into dust-cover-bags.
The dust covers offer departments a choice in Sealing.
1. Heat Sealable
2. Self Sealing and may be re sealed up to ten times.
Code
803030
803038
803039
803031
803032
803040
803033
803034
Description
200 x 300 mm + 50 mm
250 x 400mm + 50 mm
250 x 1500 mm + 50 mm
300 x 500 mm + 50 mm
420 x 700 mm + 50 mm
600 x 500 mm + 50 mm
600 x 750 mm + 50 mm
200 x 750 mm + 50 mm unprinted
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
Ctn Qty
1000
500
500
500
500
100
100
500
19 of 42
STERICLIN® INDICATOR STRIPS
Indicator, Sterilization: chemical strip, class 1, for pre-vacuum steam Sterilization
Indicator strips with Class 1 Chemical Indicators
for STEAM, ETO and FORMALDEHYDE sterilization
EN 867-2 / ISO 11140-1
Application:
For identification of sterile goods, by indicating to users that the item has been processed.
Mode of application:
Add the indicator strip to the sterilization goods. Sterilize with standard cycle.
Evaluation:
Examine the colour of the indicator under sufficient light conditions and assess the colour change. A
distinct colour change shows that the important sterilization parameters have been achieved. The
typical colour changes are:
Steam
Formaldehyde
E.T.O.
pink ⇒ black
brownish violet ⇒ green
white ⇒ yellow
Colour Change:
If the colour change is incomplete some or all of the important sterilization parameters have not been
reached. Consider the concerned batch as <non-sterile>, check your Sterilizer.
Safety advises, Storage and Shelf life from date of manufacture:
Do not interfere with the indicator ink directly or indirectly. The indicators are destined for single use
only. The indicators have to be protected against direct UV-light and have to be stored at a temperature
of 15°C - 25°C with a relative humidity of 35 - 50 %.
Shelf life for indicator products is 2 years from date of manufacture. Manufacturing date and expiry date
are stated on the product labelling.
Sterilization monitoring products with chemical indicators are not classified as medical products under
the rules of the European Medical Device Directive and therefore are not subject to CE-marking!
ARTG No. 137090
Code
804092
804079
804098
Description
Steam – 150 x 30
Steam/Self Adhesive – 150 x 30
ETO – 150 x 30
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
Ctn Qty
250 pcs
250 pcs
250 pcs
20 of 42
STERICLIN® BOWIE & DICK TESTPACK,
ONE TIME USE
Bowie & Dick – Class 2 Indicator Single Use Test Pack
DIN EN 867-3, EN 867-4
The Sterilope Bowie & Dick indicator test sheet / pack fulfils the performance requirements of EN 867-3
respective EN 867-4
• Colour change from blue to pink
• The indicator ink does not contain any heavy metals!
• Shelf life: 4 years from date of manufacture
• Reproducible test results: single use test packs can not be prepared in a different or false way
®
The outer label provides space for identification remarks:
• Sterilizer / Machine number
• Date
• The outer indicator dot shows clearly whether the pack has been processed or not.
ARTG No. 137090
Sterilope Bowie & Dick Testpack
Code
Description
801971
Bowie & Dick testpack
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
Ctn Qty
20
21 of 42
ADHESIVE TAPES – WITH AND WITHOUT INDICATOR
High Temperature Adhesive Tapes for STEAM ETO and DRY HEAT sterilization.
Adhesive Tapes with Chemical Indicators for STEAM, ETO and DRY HEAT sterilization
Application:
For fixing of sterile packs made of wrapping paper and / or non-wovens. For identification of sterilized/
non-sterilized packs.
Evaluation:
Examine the colour of the indicator in sufficient light and assess the colour-change. A distinct colour
change shows the important sterilization parameters have been achieved. The typical colour changes
are:
Steam
Green ⇒ brown/blk
E.T.O.
Dark red ⇒ green
Dry Heat
Green ⇒ yellow
Colour Change:
If the colour change is incomplete some or all of the important sterilization parameters have not been
met. Therefore the batch should be considered as ‘non-sterile’ - check your sterilizer.
Safety advice:
Do not compromise the tape directly or indirectly by use of solvent pens. The indicator tapes are
designed for single use only.
Storage and shelf life:
The tapes and indicator tapes must be protected against direct UV-light and must be stored at a
temperature of 15°C - 25°C and a relative humidity of 40 - 60%. All tapes with and without indicator
have a shelf life of 2 years after date of manufacture. Please note: CE marking is not applicable for
indicator products, because this product is not considered a medical product under the clause of the
EC-directive 93/42/EWG.
ARTG No. 137090
Adhesive tapes width x 50m/roll
Code
Description
802096
Plain Adhesive Tapes– 19mm
802097
Plain Adhesive Tapes – 25mm
Adhesive tapes with indicator width x 50m/roll
Code
Description
802093
STEAM – 25mm
802084
STEAM – 19mm
802083
STEAM extra strong adhesive – 19mm
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
Ctn Qty
48 reels
36 reels
Ctn Qty
36
48
48
22 of 42
STERILOPE AND GUARDIAN STEAM PAPER
STERILIZATION BAGS
Paper Bags with heat seal top
CE / EN 868
• 60 g/m² sterilization paper conforming to EN 868-3 and DIN 58953, parts 2 and 6.
• heat sealable, sterilization resistant adhesives and colours, solvent free.
• non-toxic steam indicator.
Sizes: standard sizes with either heat seal-top or plain top (without heat-seal-coating).
Manufacturer's trademark, dimension, order Number Double folded, heat sealed and glued bottom seal
Method of sterilization: Steam, E.T.O.-gas, formaldehyde, gamma-rays - not for plasma-Sterilization!
Method of use: Paper bags should only be filled to 3/4 of their capacity. A free space of at least 3 cm
from the seal area should be maintained in order to avoid stress on the seal. After sealing, the filled
bags should be placed in a container (e.g. sterilization basket), so they support by one another.
Sealing: The sealing temperature should be approx.
180°C. For paper bags rotary sealing machines are most
suitable.
Sterile removal of contents: Scissors should be used to
cut and remove the contents. It is not desirable to peel
open paper bags and maintain a good aseptic
presentation. Avoid tearing open bags, as this can lead to
the generation of undesirable particles.
STERILOPE paper bags are in accordance with EN ISO 11607
ARTG No. 135953
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
23 of 42
Code
501001
500025
500064
500055
500067
500114
500069
500110
500135
500078
500180
500112
500022
500254
Description (length x width x height)
Number1 Satchel 195mm x 128mm x 50mm
Number 2 Satchel 340mm x 200mm x 33mm
Number 4 Satchel 340mm x 255mm x 55mm
Number 5 Satchel 270mm x 168mm x 68mm
Number 7 Satchel 270mm x 70mm x 35mm
Number 8 Satchel 195mm x 70mm x 35mm
Number 9 Satchel 490mm x 70mm x 35mm
Number 10 Satchel 155mm x 90mm x 50mm
Number 13 Satchel 340mm x 165mm x 70mm
Number 18 Satchel 155mm x 70mm x 38mm
Number 21 Teat Cover 135mm x 74mm x 40mm
Number 21 Bottle Cover, extra long 187 x 74 x 41mm
Number 22 Satchel 340mm x 300mm x 64mm
Number 30 Satchel 440mm x 200mm x 98mm
Gram
57 gsm
57 gsm
57 gsm
57 gsm
57 gsm
57 gsm
57 gsm
57 gsm
57 gsm
57 gsm
57 gsm
57 gsm
57 gsm
57 gsm
Ctn Qty
2000
500
500
1000
2000
2000
1000
2000
1000
1000
2000
1000
500
500
Gram
57 gsm
57 gsm
57 gsm
57 gsm
57 gsm
57 gsm
57 gsm
57 gsm
57 gsm
57 gsm
Ctn Qty
1000
500
500
1000
1000
1000
2000
500
250
1500
GUARDIAN paper bags are in accordance with EN ISO 11607
ARTG No. 109918
Code
370001
370025
370045
370075
370095
370015
370177
370200
370254
370315
Description (length x width x height)
Number 1 Satchel
Number 2 Satchel
Number 4 Satchel
Number 7 Satchel
Number 9 Satchel
Number 13 Satchel
Number 21 Satchel
Number 22 Satchel
Number 30 Satchel
Number 24 Sanitary Napkin Bag
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
24 of 42
POLYSTAR HEAT SEALERS
35 75001
35 75002
620 DSM Rotary Heat Sealer
620 DSM Rotary Heat Sealer
Right Hand Side Feed
Left Hand Side Feed
Used for
• Continuous sealing of sterilization bags (paper/paper)
• Sterilization of pouches (paper/plastic)
Provides gold standard in heat sealing
• Will Provide seal speed 6.2m/min
• Heat seal width 12mm casing made of stainless steel.
35 75003
980 DSM Rotary Heat Sealer
Used for
• Continuously sealing sterilization film and bags (paper/paper) or (paper/plastic.)
Provides gold standard in heat sealing
• Seal speed 9.8m/min
• Heat seal width 15mm,
• Digital temperature and counter indicator
• Automatic start/stop or conveying system,
• casing made of stainless steel.
Advantages:
• . Digital thermostat
• . Accuracy of temperature +/- 2 %
• . Casing and table made of stainless steel
• . Engine of low noise
• . "GS" approved and "CE" conforms
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
25 of 42
PMS HEAT SEALERS AND ROLL DISPENSER
PMS Medikal is a global supplier of Sterilization Control Products and Pack Closure Systems with state
of the art, high-tech manufacturing equipment. PMS Medikal products are served in more than 60
countries worldwide on a continuous base. The manufacturing system is certified with ISO 9001 and
ISO 13485; all products conform to international norms like EN 868, ISO 11607, ISO 11140 and are CE
marked.
Description/Application:
A variety of heat sealers are available, they are extremely easy to use made with solid durable stainless
steel for hygiene. One power is on and temperature is set, the decide works when needed and stops
automatically when the work is done. Accurate temperature control allows sealing of Tyvek pouches. All
Sealers correspond to DIN 58953-7. Multi line sealing, temperature control by microprocessor, digital
LED display, adjustable seal distance and many other features.
Model SS101: Rotary Heat Sealer
Model SS201: Rotary Heat Sealer with Printer
Model PM101: Rotary Heat Sealer Introducing Pouch Mate Automatic Cutting and Sealing Device
In principle, the Pouchmate™ combines a roll dispenser and a rotary sealing device. Unlike usual roll
dispenser & cutting devices, Pouchmate™ operates fully automatic. After the length and quantity
adjustments are determined through the panel, Pouchmate™ will produce the ready to fill pouches from
any sterilization reel in required length and quantity. The built-in rotary sealing system integrates with
the automatic feeding system continuously and seals the reel right below the cutting line. The
pouchmate™ medical sealing system can be also used separately for cutting or sealing operations.
Model KA201: Roll Dispenser and Cutter
Solve your laminate roll storage, dispensing and cutting all in the one rack.
Can be used on the bench or mounted on a wall, made of Stainless steel. This robust unit has a cutting
system does not generate paper dust, long life rotary knife which sharpens automatically while working.
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
26 of 42
BELINTRA
Application:
Belintra is your reliable partner for storage and transport of instruments and medical material for
pharmacy, surgery, central sterilization and cleanrooms. The effective management of logistics is vitally
important in the health care industry. Efficient storage and transport practices can help to reduce the
efforts required to address these issues and redirect the resources to patient care. We understand very well that our customers do not all have the same working methods or demands.
That is why we prefer to work in close consultation with our customers to find the products that best
meet their requirements and fit best within their environment.
Benefits:
Whether it is collection of dirty instrument from theatre, cleaning, washing, decontaminating, sterilizing,
storage and return to theatre, or pharmacy and medication distribution, a Belintra integrated system
where all parts fit together as a complete logistic system that ensures effective, safe and smooth
transitions from one area of the hospital to another. Belintra storage forms the main building blocks for
the FIFO system.
Range:
Medicarts, Open Modular Ward Trolleys, Mobile Work Stations, Modular Transport Trolleys, Closed
Transport Trolleys, Linen Distribution Trolleys, Uflex III Modular Storage System, Baskets, Trays and
Shelves, Intrarack, Instrument Baskets, Height Adjustable Packing Tables and an extensive variety of
accessories.
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
27 of 42
INTRARACK
Application:
Our modular IntraRACK wire-rack system will meet all your storage and transport needs throughout the
entire hospital. The IntraRACK system can be used in nursing and other units to store and transport
linen or other sterile and non-sterile items. The range of shelf sizes, upright heights and the optional
mobile use of this system offer logistics and nursing staff a myriad of possibilities.
Benefits:
As both the uprights and the shelves are available in various sizes, this system will allow you to make
the best possible use of the available space. The IntraRACK system is easy to install. No bolts or tools
are required. The conical sleeves around the uprights ensure that the shelves remain firmly in place. As
the height of the sleeves can be adjusted, you can tailor the unit to the items you wish to store in them.
The racks have been designed for stationary and mobile use. For stationary use, the uprights are fitted
with an adjustable foot while the mobile uprights can be fitted with swivel castors.
Many accessories and options are available, tell us about your requirements and we will customize the
system to suit your needs.
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
28 of 42
U-FLEX STORAGE SYSTEM
Description:
The UFlex 3 modular storage system is a combined system was designed with functionality, durability
and stability in mind. The result is a unique storage system manufactured from anodised aluminium with
durable and high quality components. Each column features the potential of a wide variety of baskets
and shelves as storage options. Each column comprises two uprights that are connected to each other
by a set of four spacers (4 = 1 set). The stands are fitted with adjustable plastic feet. The customer can
determine the distance between the rails at 68mm intervals. The loading capacity is 600kg per stand,
25 kg per location with Tourne-click rails. Shelves with the same depth offer endless combinations. It is
possible to join several columns, eg. a column for baskets combined with a column of shelves.
The UFlex 3 system offers ergonomic and hygienic storage solutions for sterile packs, containers or
componets. Suitable for CSSD, the OR, the pharmacy, the warehouse and many other departments.
The UFlex 3 system is synonymous for quality, flexibility and long life.
Many types of baskets and shelves are available to customize your set-up. High quality polycarbonate
baskets of various depths with dividers are available as well as economical ABS baskets; the system is
modular allowing the greatest flexibility for your storage requirements.
We can evaluate measure and advise the optimal setup for your budget and space. Remember you can
start with just one two-column set up.
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
29 of 42
MEDICART
Description:
Medicart with drawers is a multifunctional, modular trolley with numerous possibilities in terms of
structure and applications. Medicarts have been designed in accordance with the most stringent safety
standards and meet all the ergonomic and hygiene requirements.
Kydex worktop continuous Kydex worktop comes with raised edges on three sides. As it is devoid of
any sharp corners the worktop is easy to clean. The worktop is scratch proof, can be cleaned with
ordinary cleaning products and disinfectants, and is UV and heat-resistant. The surface can be cleaned
to perfection, even after coloured disinfectants, e.g. ISO Betadine, have been spilled.
Runners have been fitted with a soft-closing system. As the drawer is 105% extendible, trays can
easily be lifted out of the frame.
Handles the drawers have been fitted with aluminium handles, which, thanks to their rounded corners,
can be easily cleaned and disinfected.
Locks The Medicart can also be fitted with a lock if required.
Castors Studies have shown that double castors reduce rolling resistance by 50% and make the cart
easier to maneuver. The Medicart comes with double Tente swivel castors, 1 of which has been fitted
with a brake and 1 with a swivel lock (antistatic).
Medicart Roller Shutter a multifunctional, modular cart, which distinguishes itself in terms of choice of
materials,
ergonomics, hygiene, durability design. The cart can be fitted with numerous internal components: from
baskets to trays, in grid panels or on telescopic runners. The cart’s contents and accessories can be
fully tailored to your individual needs and you also have the option of combining baskets and medication
trays. Whether used for medical care or to transport and/or distribute medication, the Medicart is the
most ergonomic, hygienic and patient-safe application. Available in low or high profile.
• Fitted standard with ergonomic grid walls with built-in stops for modular 600 x 400 mm baskets.
• Closed with a plastic roller shutter with integrated anodized aluminium handle.
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
30 of 42
MODULAR TRANSPORT TROLLEYS and WARD
TROLLEYS
Description:
Our ISO transport trolleys, based on Euronorm 400 x 600 mm, have been specifically designed to
transport goods between the various units. They allow logistics staff, pharmacists and nursing
staff to easily transfer modular trays from the storage system to the trolleys and vice versa.
When fitted with a cover, the goods in the ISO trolley will remain protected and secure during transport.
Modular transport trolleys, high gloss white polyester coated steel trolleys with high UV and solvent
resistance. A BACT-O-STOP® silver based additive, which prevents the propagation of all known
bacteria is added to the powder coating.
Fitted with 11 pairs of U or L shaped nylon rail inserts, the trolley can accommodate all standard
Euronorm trays or baskets (60 x 40 cm).
Running gear: 4 non-marking Tente® rubber swivel castors Ø 125mm, 2 with brakes. 4 plastic padded
corner deflectors. One, two or three column trolleys are available, optional stainless steel, push
handles, shelving and telescopic rails.
Description:
Our range of open, modular ward trolleys distinguishes itself in terms of durability, hygiene, excellent
maneuverability and load-bearing capacity. These trolleys were designed in accordance with the
Euronorm standard.
They all have a high-quality, powder-lacquered steel frame. Their finish is UV resistant, scratch proof
and impervious to most chemical products. This trolley meets the most stringent hygiene requirements.
Thanks to the addition of the additive “BACTOSTOP” to the coating of the ward trolley, the multiplication
of all common bacteria is prevented.
The ward trolleys have also been fitted with a number of attachment points to accommodate
a range of accessories. Even long after you took delivery of the trolley, its accessories can be adjusted,
by your own technical staff. Belintra uses accessories that are screwed in rather than hooked on, which
prevents damage to the lacquer, noise, loss and theft.
The various models allow you to cater for the most diverse nursing care situations.
Please ask for more information from our Belintra Range.
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
31 of 42
STAINLESS STEEL TRANSPORT BASKETS
and SHELVES
These stackable and nestable baskets have been designed to store wrapped instrument baskets
protecting them from damage that can happen in storage and transport. They can be processed all the
way from washing, to sterilization to storage. As a sterilization, transport and storage component, these
stainless steel wire baskets will prove to be an invaluable tool in your instrument set sterilization
process. The wire baskets can be used in all Belintra transport trolleys and storage systems.
Our sterisystem highly polished wire trays are the perfect solutions if you need to sterilize, transport and
store larger sterilization packs. Manufactured in accordance with the highest quality standards and
finished to perfection, these wire trays meet the most stringent CSSD and OR requirements. Belintra
wire trays can be used in all our transport trolleys and storage systems.
Stainless Steel Wire Baskets
Code
Description
3000500002
Wire basket 60 x 40 x 10 cm
3000500004
Wire basket 60 x 40 x 13 cm
3000500007
Wire basket 60 x 40 x 20 cm
Stainless Steel Wire Basket DIN
3000500001
Wire basket 60 x 30 x 4 cm
Sterilization Basket
3000500012
Wire basket 57.5 x 28 x 27 cm
Stainless Steel Wire Shelves
3000300007
Wire shelf 60 x 40 cm
Ctn Qty
ea
ea
ea
ea
ea
ea
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
32 of 42
PC BASKETS AND DIVIDERS
Description:
Our modular, injection moulded polycarbonate (PC) baskets are extremely impact-resistant, durable
andtransparent due to the carefully selected raw and other materials combined with continuous quality
control throughout the entire production process.
The standard Euronorm external dimensions, i.e. 600 x 400 mm, ensure that the trays can be used in
all our storage and transport systems, medical care and medication distribution trolleys.
Polycarbonate (PC) has excellent mechanical properties; baskets have a load-bearing capacity of 35kg
and are extremely break-resistant when exposed to sudden, high impact situations. Polycarbonate can
withstand temperatures of between -40°C and +120°C, with the result that our baskets can be sanitized
at a temperature of up to 120°.
In the event of contamination, the baskets can also be put through a steam tunnel.
Polycarbonate (PC) dividers are slotted into the grooves, with the result that they are extremely well
secured. Thanks to their design, these same PC dividers can also be used in our closed boxes. The PC
dividers can be shortened to create a range of compartments. The dividers are inter-secured by means
of a T connection.
PC Baskets
Code
Description
Ctn Qty
1500400010
ea
Closed tray
60 x 40 x 5 cm
1500400006
ea
Basket
60 x 40 x 10 cm
1500400008
ea
Basket
60 x 40 x 20 cm
PC Dividers Height 5 cm
1500300012
1500300017
PC Dividers Height 10 cm
1500300007
1500300013
PC Dividers Height 20 cm
1500300009
1500300015
40 x 5 cm
60 x 5 cm
ea
ea
40 x 10 cm
60 x 10 cm
ea
ea
40 x 20 cm
60 x 20 cm
ea
ea
ABS, Medibox and Polypropylene boxes are available to use across the sterisystem.
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
33 of 42
LABEL HOLDERS
Description:
Our Multifix label holders can be affixed to the baskets and PC dividers in an upright and in a horizontal
position. The label holders come with a front and back mount to ensure that they remain firmly in place.
Label holders are positioned in between the grooves of the baskets so that they do not become
detached when you take a box out of the baskets.
Label holders allow you to easily label trays and baskets that have been subdivided into various
sections. This makes it easier to organize the contents and to optimally subdivide your trays and
baskets. Label holders allow you to clearly label the contents of trays and baskets so that users can
swiftly find what they are looking for. Multifix label holders can be affixed in an upright or horizontal
position. Our label holders can quickly and easily are affixed to all our trays, baskets and PC
dividers. Multifix label holders consist of 3 parts: a label holder, a mounting plate and a label.
Multifix label holder
Code
Description
1500800060
Credit card size Multifix label holder
Ctn Qty
ea
STERI-ID LOOP
The Steri-ID Loop has a RFID tag imbedded; thanks to an open platform you have the opportunity to
make a selection among different suppliers of RFID writing and support technologies. The imbedded
tag is resistant to washing, chemicals and autoclaving, it is guaranteed for over 400 cycles. Available in
5 colours. Ask us for more information.
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
34 of 42
STAINLESS STEEL INSTRUMENT BASKETS
Description:
Belintra sterisystem instrument baskets have been manufactured from highly polished AISI 304 L grade
stainless steel. The ‘dry bottom’ of the instrument baskets ensures good evacuation of condensing
liquids. The base is composed of a 5.8mm square welded mesh in 1.2mm stainless steel wire. The
baskets have two handles and have a load bearing capacity of 15kg.
The ultrafine punch pattern of the side panel protects fine instruments but also guarantees a good
permeability during the sterilization process. The staggered perforation pattern features 2mm holes that
guarantee a permeability of more than 50%. Steam and during the washing process water can readily
penetrate ensuring an optimum result.
The upper wire has been welded on to the sides of the basket. This results in a beautifully finished
product that is devoid of any sharp edges and dispenses with the risk of perforations during unpacking.
The upper wire also ensures that the top of the basket cannot become contaminated by dirt.
Belintra instrument baskets are produced according to the highest quality standards; they have been
tested and certified by a qualified 3rd party. Belintra instrument baskets are ‘CE medical Class I’
approved, all baskets carry a laser marked ‘CE - label ‘and a lot number.
For quality-assurance purposes, all our baskets are put through a special quality control tool. To make
sure that the mesh is uniform in size, the base over every basket is meticulously checked, which is vital
of course if we want to ensure that your instruments remain firmly in place.
For identification and traceability purposes, the instrument baskets come with a bar code zone.
Steri-ID instrument Baskets:
Our instrument baskets with integrated Steri-ID are made in accordance with the same quality criteria
as our standard Sterisystem instrument baskets.
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
35 of 42
The integrated Steri-ID RFID tag is a high quality alternative to the traditional process with barcode
stickers used to keep track of the contents of instrument baskets. Stickers are easily damaged, become
illegible and as such regularly need to be removed and replaced. The embedded tag however is
resistant to washing and sterilization conditions in the autoclave (high temperatures, steam and
vacuum) as well as to the most common chemicals used in hospitals. It is therefore guaranteed that It
can be used for over 400 cycles.
The embedded Steri-ID tag is based on ISO 15693 technology. Thanks to this open platform you have
the opportunity to make a selection among different suppliers of RFID writing and reading technologies.
Steri-ID tag can be scanned through the sterilization packaging; hence no direct viewing is required to
trace the contents during the entire sterilization process.
Steri-ID instrument basket is available in two standard sizes (DIN 1/1 and DIN 1/2) and five different
colors.
Stainless Steel Instrument Baskets DIN
Code
3000600005
DIN ¼
12 x 25 x 6 cm
3000600007
DIN ½
24 x 25 x 6 cm
3000600012
DIN 1/1
48 x 25 x 6 cm
3000600011
DIN 1/1 high 48 x 25 x 10 cm
3000500020
DIN 1/2 high 24 x 25 x 10 cm
Stainless Steel Instrument Baskets EURO
3000600026
EURO ¼
12 x 30 x 6 cm
3000600018
EURO ½
24 x 30 x 6 cm
3000600015
EURO 1/1
48 x 30 x 6 cm
3000600004
EURO 2
11.5 x 32 x 6 cm
3000600006
EURO 2
23 x 32 x 6 cm
3000600010
EURO 2
46 x 32 x 6 cm
Steri-ID Instrument Baskets DIN 1/1
Code
Tag Colour
3001200018
Yellow
48 x 25 x 6 cm
3001200019
Green
48 x 25 x 6 cm
3001200020
Black
48 x 25 x 6 cm
3001200021
Blue
48 x 25 x 6 cm
3001200022
White
48 x 25 x 6 cm
Steri-ID Instrument Baskets EURO
3001200013
Yellow
24 x 25 x 6 cm
3001200014
Green
24 x 25 x 6 cm
3001200015
Black
24 x 25 x 6 cm
3001200016
Blue
24 x 25 x 6 cm
3001200017
White
24 x 25 x 6 cm
Name
Berta
Bella
Betty
Belinda
Brigitte
Bally
Babedo
Brenda
Bambi
Barbie
Beatrice
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
Ctn Qty
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
Ctn Qty
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
36 of 42
FINE MESH, STAINLESS STEEL INSTRUMENT BASKETS
with lid
Description:
These fine-meshed baskets are fitted with a lid and feature a more dense mesh, which makes them
very safe for the sterilisation of small instruments. Mesh size of bottom and lid: 3 x 3 mm. Perforated raised sides (Ø 2 mm hole size).
2-patented Teflon locks on lid; user-friendly and ergonomic. The baskets are made to the highest
quality standards. The baskets are entirely free of welding burrs, openings and distortion of wires or
weld discolouration.
Fine Mesh Stainless Steel Instrument Baskets with Lid
Code
Description
3000700001
Instrument basket with lid 12 x 25 x 4 cm
3000700002
Instrument basket with lid 24 x 25 x 4 cm
3000700003
Instrument basket with lid 48 x 25 x 4 cm
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
Ctn Qty
ea
ea
ea
37 of 42
HEIGHT ADJUSTABLE TABLES
Description:
Each worktop is electrically height adjustable. The adjustment control with memory function allows you
to store three different positions. This is very convenient when several people use the same
workstation. The height is continuously adjustable between 800 and 1300mm.
The table is fitted with two robust lifting pillars in anodised aluminium. Each column can sustain a
weight of 150kg. In case of overload, the lifting pillars block automatically. The feet of the table are
stainless steel and have levelling adjusters.
The worktop is made from hygienic, water-resistant Hexpl plate, fitted with a scratch-proof HPL layer or
brushed stainless steel. All materials are corrosion-resistant, resistant to the common cleaning and
disinfection products as well as UV and heat.
The table can be fitted with a wide range of additional features including 3 drawer unit, mains current,
UTP, compressed air, a pc-arm and an upper structure.
Please call us if you have any queries.
Height Adjustable Tables with Stainless Steel Worktop
Code
Description W x D
17005 00086
Worktop 1800 x 800 mm
17005 00088
Worktop 1800 x 1000 mm
17005 00090
Worktop 2000 x 800 mm
17005 00093
Worktop 2000 x 1000 mm
Ctn Qty
ea
ea
ea
ea
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
38 of 42
RENO PLASMA STERILIZERS
Description/Application:
Renosem Plasma Sterilizers incorporate new plasma technology developed by the Reno engineers to
create an extremely penetrating and effective sterilizing cycle.
Combining Radical plasma using DBD (dielectric barrier discharge) plasma technology maximizing
H2O2 radical effect and sterilization efficacy and Abatement Plasma which breaks down the H2O2 gas
into water vapour and Oxygen
Reno Plasma Sterilizers have the user friendly interface of a wide coloured touch screen that display
functional and cycle information. The chamber is rectangular providing a usable volume of more than
90%, made of solid acid proof stainless steel, it is easy to clean.
Ready to use, single use sterilant cassette, reliable quantitive injection system ensures the correct dose
is dispensed into the chamber. There are no drain bottles to empty or maintain as the small amount
of residue left from the cycle is released via a rear vent as water vapour and oxygen.
Environmentally friendly.
The thermal printer provides complete cycle information.
The units are just plug in, no complicated installation, plumbing or venting.
Cycle time is rapid averaging around 50 minutes and with the low temperature operation, applicable to
heat sensitive and fine instruments.
Narrower internal diameter and longer hollow devices can be processed in the RENO plasma
sterilization system.
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
39 of 42
Standard 40 to 50 minutes cycle time for most instruments such as, Single-Channel Polyethylene &
Teflon flexible (internal diameter > 1Ø and length < 12,000mm) or rigid endoscopes (internal diameter >
1Ø and length < 1,000mm). Flexible Single-through Lumen (one-side blocked): more than 2mm (ID) x
less than 1,500mm (Length).
ARTG No. 177578
Code
TBA
TBA
TBA
440002
440003
440004
440005
440006
440007
Description
Reno Plasma Sterilizer S20 Single Chamber Compact Model
Reno Plasma Sterilizer S130 Single Chamber
Reno Plasma Sterilizer S130D Single Chamber, Double Door Pass
Through
Hydrogen Peroxide Plasma Sterilant Cassette
ARTG No. 221385
Plasma Sterilization Chemical Indicator Strip
Plasma Sterilization Biological Indicator
Biological Indicator Incubator
Basket Stainless steel for Reno Series Sterilizers
Thermal Printer Paper for Reno Series Sterilizers
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
Ctn Qty
1
1
1
20 x 2
250
30
1
2
5
40 of 42
Med-Con Pty. Ltd. Standard Terms And Conditions Of Sale
1.
2.
Terms Apply To All Contracts
These terms and conditions apply to and form part of any contract arising from the Customers acceptance of the Company’s
offer and any contract arising from repeat of further orders for the same or similar goods whether given orally or otherwise.
Offers
(a)
(b)
(c)
(d)
(e)
(f)
(g)
Unless otherwise agreed in writing, all prices are;
Open for acceptance for a period of thirty (30) days only.
F.O.B. Med-Con Pty. Ltd. Warehouse.
Med-Con reserve the right to alter prices without notice.
Exclusive of any costs attributable to any special delivery required by the Customer and those costs are recoverable from the
Customer.
Based on current labour and material costs, and any variation to those costs or to specification are recoverable from the
Customer.
Calculated on the basis of all goods ordered being delivered in one shipment.
Net of Sales Tax
3.
Acceptance
The placing of an order with the Company is a full acceptance of these Terms And Conditions and any terms and conditions
sought to be introduced by the Customer’s order will be disregarded and form no part of the contract.
4.
Delivery
(a)
The Company will use its best endeavours to deliver or arrange for delivery of the goods to the Customer at the agreed price
and time of delivery but no liability will attach to the Company if the goods are not delivered within that period.
(b)
The Company reserves the right to alter the agreed date by notice prior to the due date of the delivery given to the Customer
where it is in the Company’s view impractical to deliver or arrange for delivery of the goods to the Customer on the specified
date.
(c)
Any goods not taken within the period specified in paragraph (a) or on such other date as has been specified to the Customer
goods are to be paid for in full within thirty (30) days from that date unless otherwise agreed in writing and any delivery or other
costs incurred by the Company in connection with such goods are recoverable from the Customer. Such goods remaining in
the Company’s stores under these circumstances will be at the Customer’s risk and subject to a storage charge at the option of
the Company.
(d)
The Company reserves the right to supply by instalments. Each instalment is deemed to be sold under a separate contract
and will be invoiced for payment upon the Company’s usual terms as set out in clause 7. Failure of any one delivery shall not
invalidate the contract as to the other deliveries.
5.
Liability - Suitability Of Goods
(a)
Subject to paragraph (c), no warranty is given by the Company or responsibility accepted by it that the goods sold comply with
the requirements of any legislation relating to the making and/or labelling and/or packaging of goods. Compliance with the
requirements of such legislation is the sole responsibility of the Customer and the Customer must indemnify the Company
against all losses, claims and expenses of whatsoever nature arising from any action or proceeding of any kind resulting from
non compliance.
(b)
Subject to paragraph (c), no condition or warranty that work done or goods supplied are or is suitable in size, shape, capacity,
quality or otherwise for the Customers purpose is contained in, given by or to be implied in this contract.
(c)
The Customer has the benefit of the conditions and warranties implied by statute which cannot be lawfully be excluded,
restricted or modified.
(d)
Subject to any statutory provision to the contrary, any liability of the Company to the Customer in relation to any breach of a
condition or warranty referred to in paragraph (c) is limited to replacement of the goods or supply of the goods, or at the option
of the Company, payment of an amount equal to the cost of replacing the goods or of acquiring equivalent goods (whichever is
the lowest amount)
6.
Carriers
(a)
Title to and risk in respect of goods delivered to a carrier for carriage to the Customer passes to the Customer when the goods
are handed over or made available to the carrier agreed between the Company and the Customer.
(b)
The Company will use its best endeavours to notify the Customer within 24 hours of goods having been handed over or made
available to a carrier but no liability will attach to the Company if notice is not given within that period, nor will failure to give
notice within that period excuse the Customer from any of the obligations under this contract.
(c)
If there is no agreement between the Company and the Customer as to who the carrier is to be, or if the Company is otherwise
to select the carrier, the Company may select any carrier as in its absolute discretion it sees fit to engage such carrier on such
terms as the Company in its absolute discretion sees fit.
7.
Terms
(a)
Subject to paragraph (b), goods will be paid for at the time of placing an order.
(b)
Where :
(i)
the Company has approved an application for commercial credit from the Customer or has otherwise agreed in writing
(and that approval has not been revoked or withdrawn), and
(ii)
The cost of goods ordered by the Customer, plus the cost of any goods previously ordered by the Customer for which
payment is outstanding, does not exceed the credit limit approved for the Customer, goods will be paid for at or before
the end of the month following the month of invoice.
(c)
The Company may charge on overdue balances outstanding at its current bank overdraft rate plus one and one-half
per cent (1 ½%) as a handling fee.
(d)
If payment is not received by the Company on or before the due date, the Customer will be liable for all costs incurred
in recovery, including all debt collection agency fees and solicitor’s costs.
8.
Default of Customer
If agreement for the purposes of clause 7 (a) is not granted or is revoked or withdrawn by the Company, or the Customer
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
41 of 42
defaults in payment or commits an act of bankruptcy or, being an incorporated company, passes a resolution for winding up
(except for the purposes of reconstruction) or a court makes an order to that effect, the Company reserves the right to cancel
the order (so far as it remains unperformed) in all or in part, without liability on the part of the Company and all monies owing to
the Company under the contract will be immediately payable.
9.
Claims / Returns
Any claims must be made in writing within fourteen (14) days of receipt of the goods by the Customer, except claims as to nondelivery which must be made in writing within twenty-eight (28) days of dispatch of the goods, and any claims not made within
that period shall be deemed to be waived. All returns are subject to written Authorization from Med-Con Pty. Ltd. prior to return
of goods. A 20% Re-Stocking Fee may apply to returned goods.
10.
Variation or Waivers
These terms and condition shall govern any contract unless expressly waived or varied in writing by the Company, but so as
not to release the Customer from any obligation herein.
11.
Force Majeure
Every effort will be made to carry out every contract but the due performance of a contract is subject to variations or
cancellation owing to an Act of God, internal disturbances, war, strikes, lockouts, fire, flood, riot, theft, force Majeure or any
other causes beyond the Company’s control or owing to inability to procure materials or articles except at increased prices due
to any of the above, but the Customer will remain liable for payment for work done to the date of cancellation.
12.
Patents and Designs
(a)
In consideration of the Company accepting an order from the Customer, the Customer warrants and assures that no patent,
copyright, trademark, design or any other right, or any legislation, is or will be infringed by reason of the Company accepting or
carrying out the order and the Customer agrees to indemnify the Company against all losses, costs and expenses of
whatsoever nature suffered or incurred by the Company in connection with any claim, action or proceeding by a third party.
(b)
The Customer acknowledges that all technical information, advice, know how, drawings, designs and samples (“the
information”) submitted to the Customer are the confidential and proprietary information of the Company.
(c)
The Customer will keep the information secret and confidential and will not disclose it or any part thereof to any party without
the express authority of the Company. This obligation of confidence does not apply to any part of the information which forms
part of the public domain or enters the public domain other than by reason of default on the part of the Customer.
(d)
The Customer will not reproduce any part of the information in any form without the express authority of the Company.
13.
Experimental Orders
Preliminary work and/or work produced in an experimental way at a Customer’s request will be considered an order and may
be charged to the Customer.
14.
Sales Tax
(a)
Unless the Customer furnishes to the Company a Quotation of Certificate or an Exemption Certificate, the Company will charge
to and collect from the Customer the amount of any sales tax payable in respect of the goods.
(b)
The Customer warrants that any Quotation of Certificate or Exemption Certificate furnished to the Company is properly and
lawfully furnished and that any information contained therein is true and correct in all respects and if, without knowledge or fault
on the part of the Company, a Quotation of Certificate or Exemption Certificate is improperly or unlawfully furnished or
information contained therein is not true and correct, the Customer agrees to indemnify the Company against all liabilities,
penalties, costs and expenses of whatsoever nature suffered or incurred by the Company as a result thereof.
15.
Alleged Disputes
In the event of any charges alleged to be in dispute the Customer will pay for all charges appearing on the statement of
account pending an investigation of the charge or charges so disputed.
16.
Governing Law
This contract is governed by and will be construed in accordance with the laws of the State in which is situated the office of the
Company to which the order is addressed and the Customer and the Company hereby submit to the jurisdiction of the courts of
the State and all courts competent to hear from those courts.
Med-Con Solutions for Bio-security
For Orders – PH 03 9753 2710 or FAX 03 9753 2722
42 of 42