1. No category

Materials Science & Technology 2014
how to get the most from your visit
You probably have your own special system for seeing a show. Whether you look for specific exhibitors first or
start by looking for particular products or services, this directory will guide you. You will be able to find exactly
what you need quickly and easily.
Alphabetical Listing of Exhibitors ................................................... pg 189
Exhibit Floor Plan .......................................................................... pg 190
Alphabetical Listing of Exhibitors with Company Descriptions ....... pg 193
Products/Services Index ............................................................... pg 211
Show Hours
Tuesday, October 14, 2014 | 11:00 a.m. – 6:00 p.m.
Lunch on Show Floor
Happy Hour Reception Noon – 2:00 p.m.
4:00 p.m. – 6:00 p.m.
Wednesday, October 15, 2014 | 9:00 a.m. – 2:00 p.m.
Poster Session
Lunch on Show Floor 11:00 a.m. – 1:00 p.m.
Noon – 2:00 p.m.
CONVENIENT INQUIRY SYSTEM
Your admission badge allows you to enter the exposition during show hours. When visiting exhibits, please present your
personal ID badge to the exhibitor’s representative to request additional information about products and services.
MESSAGE BOARD
A bulletin board for messages will be located in the Registration area.
PHOTOGRAPHY/VIDEO EQUIPMENT
Please keep in mind that the exhibits are the property of the exhibiting companies. Photography and/or the recording of
the exhibit hall or contents of any exhibitor booth are strictly prohibited at all times. Photography inside any exhibit space is
limited to only the company that has contracted for the exhibit space or to an MS&T representative (or their
contracted agent) with the consent of the exhibitor.
Because there may have been some late changes in booth assignments, some exhibitors may have a different
booth number than was shown on their invitations and advertising. Please check this Directory for the most-upto-date listings, as well as onsite signage.
Reasonable precautions have been taken to avoid errors in and omissions from this Directory, but MS&T does
not guarantee listings herein and shall not be responsible for errors in or omission in this Directory.
188
exhibitor list (As of 09/29/14)
BOOTHCOMPANY
BOOTHCOMPANY
325
Accutek Testing Laboratory
405
AdValue Technology LLC
532
Advanced Abrasives Corp.
T9
AK Steel
211
Aldrich Materials Science
317
Alfred University
415
Allied High Tech Products Inc.
502
American Stress Technologies
326
Angstrom Scientific Inc.
414
Applied Test Systems Inc.
T11
ArcelorMittal USA
218ASM
410
Beckman Coulter
BINDER Inc.
217
214
Boise State Univ. Materials Science and Engineering
509Buehler
324
California Nanotechnologies Inc.
401
Carl Zeiss Microscopy LLC
T13
Carpenter Technology Corp.
432
Centorr Vacuum Industries Inc.
624
Ceramics Expo
425
Clemex Technologies
433
CM Furnaces
Commercial Metals Company
T6
604CompuTherm
T15
Danieli Corporation
T8
DTE Energy
205
E.A. Fischione Instruments Inc.
319Ebatco
614
EDAX Inc.
310
Electron Microscopy Sciences
209
EMSL Analytical Inc.
615Extrel
300
FEI Company
505
Gasbarre Products Inc.
538
Goodfellow Corporation
304
Granta Design
529
GT Advanced Technologies Inc.
602
Harper International
318
Hitachi High Tech America Inc.
428
HORIBA Scientific
514
Hysitron Inc.
616
International Centre for Diffraction Data (ICDD)
501
JEOL USA Inc.
232
Kalamazoo Industries Inc.
201
Keysight Technologies
408
Kurt J. Lesker Company
519
Lab Synergy LLC
526
Lapmaster International LLC
400
Leco Corporation
621
Maney Publishing
601
Metal Samples Company
508
Metcut Research Inc.
301
Micromeritics Instrument Corporation
221Microtrac
420
MTI Corporation
337
MTS Systems Corporation
224Nanovea
500
Netzsch Instruments North America LLC
220
Newport Corporation
429
nGimat LLC
609NIST
T10Novelis
620
NSL Analytical Services Inc.
T7
Nucor Corporation
315
Object Research Systems (ORS) Inc.
524
Ocean Optics
225Olympus
226
Orton Ceramic Foundation
600
Oxford Instruments
603PANalytical
521
Photron USA Inc.
626 Pittcon 2015
427
Powder Processing & Technology
308
Proto Manufacturing Ltd.
618
Pulstec Industrial Co. Ltd
305
Renishaw
625
Rigaku Americas Corporation
431
RJ Lee Group
316
Robocasting Enterprises LLC
426
SAMCO Technologies Inc.
327
Saudi Aramco
510
Sente Software Ltd.
536
Setaram Instrumentation
437
Spectro Analytical Instruments
515Springer
T12
SSAB Americas
409Struers
418
TA Instruments
321TEC
628
Tekna Plasma
330
Tekscan USA
516Tescan
629
TevTech LLC
219
The Kerry Company Inc.
520
Thermcraft Inc.
525
Thermo Fisher Scientific
314Thermo-Calc
332
Tunable Materials Co. Ltd.
303
UES Inc.
T14
US Steel
605
Union Process
530
United Testing Sytems Inc.
333UNITRON
227 Vacuum Technology Inc.
309
Verder Scientific Inc.
215
Westmoreland Mechanical Testing & Research
416Wiley
527
ZICAR Ceramics Inc.
189
Materials Science & Technology 2014
floor plan
As of 9/29/14
Materials
Camp
350
MTS Sys
Corp
Setaram
130
Hall A
114
T15T14T13T12T11
T10T9T8T7T6
Professional Recruitment/
Career Pavilion
Mug drop/disc
golf
101
190
Tabletop Exhibitor
Photron
USA
Lab
Synergy
T6 – Commercial Metals Company
T7 – Nucor Corporation
T8 – DTE Energy
T9 – AK Steel
T10 – Novelis
T11 – ArcelorMittal USA
T12 – SSAB Americas
T13 – Carpenter Technology Corp.
T14 – US Steel
T15 – Danieli Corporation
Show Management
Exhibitor Booths
Non-Rented Booths
191
Materials Science & Technology 2014
sponsors
MS&T thanks the following companies for their outstanding support!
AM ERICA N
E L EMEN T S
NANOVEA
Thermo-Calc Software
192
company descriptions (As of 09/29/14)
Accutek Testing Laboratory
Booth #325 For over 25 years, major companies across the
world have turned to Accutek for their material identification,
product conformance, and failure analysis needs. Accutek supports a multitude of test methods, including metallurgical prep
and analysis, SEM services, static and fatigue, fracture mechanics, composites testing, and various other methods.
www.accutektesting.com
AdValue Technology LLC
Booth #405 A leading supplier of alumina, fused quartz, sapphire, and zirconia products. Our products include crucibles,
tubes and rods, plates and discs, thermal analysis sample pans,
cuvettes, and custom components. Products are widely used
for high-temperature, chemical, and wear-resistant applications.
www.advaluetech.com
Advanced Abrasives Corp.
Booth #532 Advanced Abrasives consults directly with you
to design and manufacture custom tailored superabrasive
solutions, meeting your application requirements! As an independently owned and operated micronizer of superabrasive
products, our unique advantage is that we control the crystal
type, shape, and cleanliness from start to finish.
www.advancedabrasives.com
AK Steel
Tabletop 9 Headquartered in West Chester, Ohio (Greater Cincinnati), AK Steel is a world leader in the production of flat-rolled
carbon, stainless, and electrical steel products, primarily for
automotive, infrastructure and manufacturing, construction, and
electrical power generation and distribution markets. The company operates seven steel plants and two tube manufacturing
plants across four states: Indiana, Kentucky, Ohio, and Pennsylvania. www.aksteel.com
Aldrich Materials Science
Booth #211 Aldrich Materials Science offers performance materials for the energy, electronics, and biomedical markets. We
seek to enable innovation through collaborations, technology
licensing, custom synthesis, process development, and scaleup. More information is available at
www.sigma-aldrich.com/matsci
193
Materials Science & Technology 2014
company descriptions (As of 09/29/14)
Alfred University
Booth #317 Kazuo Inamori School of Engineering/New York
State College of Ceramics: B.S. and M.S. degrees in ceramic
engineering, glass, biomaterials, materials science and engineering, mechanical and renewable engineering. Ph.D. degrees
in ceramics, glass and materials science. Short courses. Research in glass, ceramics and biomaterials. Analytical services.
http://engineering.alfred.edu
Beckman Coulter
Booth #410 For more than 75 years, Beckman Coulter has
developed and manufactured products that simplify, automate
and innovate complex biomedical and material testing. From
particle size characterization, distribution and quantification
to cellular analyses, all systems are configured to meet varied
organizational needs and provide efficient automation process
for diverse businesses. www.beckmancoulter.com
Allied High Tech Products Inc.
Booth #415 For over 30 years, Allied High Tech Products has
provided superior products for metallographic sample preparation. Allied’s TechCut 5 saw, MetPrep 3 Grinding/Polishing
System, and more will be shown, as well as Mitutoyo Hardness
Testers, Zeiss Microscopes/Software, and a full range of Allied’s
consumable products. www.alliedhightech.com
BINDER Inc.
Booth #217 BINDER is the world’s largest specialty manufacturer of CO2 and microbiological incubators, growth chambers,
ultra-low temperature freezers, ovens, dynamic, and constant
climate simulation chambers for science and industry laboratories. BINDER embodies “the best conditions for your success”
with our dedication to superior products, service, and support.
www.binder-world.us
American Stress Technologies Inc.
Booth #502 AST provides laboratory services and turnkey
systems to measure residual stress and stress related material defects. Our technologies include x-ray diffraction (XRD),
hole drilling, ESPI, and Barkhausen noise analysis. Applications
include analysis and quality control of machining, grinding, heat
treatment, welding, forming, and forging of engineered materials. Our products include XStress™, RollScan™ and Prism™.
www.astresstech.com
Boise State University Materials Science and Engineering
Booth #214 Apply for the Ph.D. Program in Materials Science
and Engineering at Boise State University! All admitted and
enrolled students receive a tuition waiver and competitive salary.
We offer innovative undergraduate and graduate programs that
facilitate interdisciplinary research with physics, chemistry, biology, electrical, and computer engineering, and mechanical and
biomedical engineering. coen.boisestate.edu/mse
Angstrom Scientific Inc.
Booth #326 Angstrom Scientific Inc. provides nanotech and
materials characterization solutions. Specifically: Kleindiek
Nano-manipulators, HitachiTabletop-SEM/EDX, NanoMegas
TEM Precession Electron Diffraction, DENSsolutions TEM heating stages, Deben Microscopy Accessories, Microtrac Particle
Analyzers, and Evactron Plasma Cleaners. Additionally, we buy/
sell used electron microscopes and FIBs. Visit booth #326.
www.angstrom.us.
Buehler
Booth #509 Buehler provides solutions for materials preparation, testing, and analysis worldwide. Buehler has been a
leading manufacturer of scientific equipment and supplies since
1936. Offering a complete line of equipment and consumables
for sectioning, grinding-polishing, microscopy, and hardness
testing, Buehler provides equipment and processes for microstructural analysis of across numerous industries.
www.buehler.com
Applied Test Systems Inc.
Booth #414 Applied Test Systems is a leading manufacturer of
materials testing and process heating equipment. Our product
range includes furnaces and ovens, universal testing machines,
creep testing machines, sealant testing machines, asphalt testing machines, biomedical testing machines, and much more. For
more information stop by our booth at #414. www.atspa.com
California Nanotechnologies Inc.
Booth #324 Cal Nano is an industry leader in nano material engineering, known as the preeminent research, development, and
production firm in designing and manufacturing superior performance components. Incorporating and innovating the latest
material sciences with multiple patented production techniques,
Cal Nano produces cost-effective components with unparalleled
strength and quality, making them the only choice when absolute performance is demanded. www.calnanocorp.com
ArcelorMittal USA
Tabletop 11 ArcelorMittal is the world’s leading steel and mining company, with around 232,000 employees in more than 60
countries. Guided by a philosophy to produce safe, sustainable
steel, we are the leading supplier of quality steel products in all
major markets, including automotive, construction, household
appliances, and packaging. corporate.arcelormittal.com |
usa.arcelormittal.com
194
Materials Science & Technology 2014
company descriptions (As of 09/29/14)
Carl Zeiss Microscopy LLC
Booth #401 As the world’s only manufacturer of light, x-ray and
electron/ion microscopes, Zeiss offers tailor-made microscope
systems for industry, materials research, and academia. A welltrained sales force, an extensive support infrastructure, and a
responsive service team enable customers to use their Zeiss
microscope systems to its full potential.
www.zeiss.com/microscopy
Carpenter Technology Corp.
Tabletop 13 Carpenter is a leader in the development, manufacture, and distribution of cast/wrought and powder metal stainless
steels and specialty alloys, including high temperature (iron-nickel-cobalt base), stainless, superior corrosion resistant, controlled
expansion alloys, ultra high-strength and implantable alloys, tool
steels, and other specialty metals. www.cartech.com
Centorr Vacuum Industries Inc.
Booth #432 Centorr Vacuum Industries manufactures hightemperature vacuum, hydrogen, and controlled atmosphere
batch and continuous furnaces for sintering, hot-pressing, heat
treatment, and pressure densification of ceramic and metal materials, with optional debinding systems for synthetic or natural
lubricant removal. Aftermarket services available.
www.centorr.com
Ceramics Expo
Booth #624 Ceramics Expo is a brand new trade show for ceramic and glass component manufacturers to meet with buying
communities from industries, such as energy, medical, electronics, aerospace, and automotive. The event will also feature all
materials and products used in ceramic and glass manufacture.
CEX15 will feature a FREE-TO-ATTEND conference.
www.ceramicsexpousa.com
Clemex Technologies
Booth #425 Image analysis for quantitative microscopy. Clemex
provides manufacturers and researchers with image analysis
software and hardware to make quantification of microstructures
less demanding and more effective. We specialize in automating
measurement of objects in digital images from microscopes and
other precision optical devices. www.clemex.com
CM Furnaces Inc.
Booth #433 CM Furnaces has been manufacturing furnaces
since 1946 and is celebrating its 60th anniversary. CM has the
capability to produce furnaces for any application. We offer units
of standard design and construction, as well as custom units
for specialized projects or needs. We will feature our complete
line of Laboratory Furnaces in all configurations, including box
and tube furnaces, ranging from 1000°C to 2000°C. These
furnaces are available in air, inert and reducing atmospheres.
196
Also featured will be our new 1700°C Batch, Hydrogen and Box
furnaces, as well as a complete presentation of CM Production
furnaces. www.cmfurnaces.com
Commercial Metals Company
Tabletop 6 Commercial Metals Company together with its consolidated subsidiaries manufacture, recycle, and market steel
and metal products, related materials and services through a
network, including steel mills, commonly referred to as “minimills,” steel fabrication and processing plants, constructionrelated product warehouses, metal recycling facilities, and
marketing and distribution offices in the United States and in
strategic international markets. www.cmc.com
CompuTherm LLC
Booth #604 CompuTherm, established in 1996, develops
CALPHAD type of modeling tools in the framework of ICME.
Current Pandat software includes three modules: PanPhaseDiagram for multicomponent phase equilibrium calculation,
PanPrecipitation for precipitation simulation, and PanOptimizer
for thermodynamic model parameter/property optimization.
Thermodynamic and mobility databases are available for variety
of multicomponent alloys. www.computherm.com
Danieli Corporation
Tabletop 15 Danieli & C. Officine Meccaniche S.p.A. is a leading
producer of steelmaking machinery and plants, ranking among
the first three worldwide. Danieli is an international company
whose mission is to satisfy the requirements of its customers
with particular attention placed on research and technological
innovation of its products as well as on competitive pricing. This
approach has allowed the Company to grow internationally, with
most of its sales in overseas markets.
DTE Energy
Tabletop 8 DTE Energy Services...we help customers run their
businesses better. DTE Energy Services provides fully integrated, comprehensive energy solutions to energy-intensive
industrial, institutional and commercial businesses across the
U.S. We acquire, build, develop, own and/or operate energy
projects, freeing our customers to focus on their core business.
www.dteenergy.com
E.A. Fischione Instruments Inc.
Booth #205 E.A. Fischione Instruments Inc. designs, manufactures, distributes, and services advanced microscopy and
nanotechnology devices for the global scientific community.
Products include specimen preparation devices, imaging detectors, and specimen holders for electronics, energy, industrial, life
sciences, and research. www.fischione.com
company descriptions (As of 09/29/14)
Ebatco
Booth #319 Ebatco is a leading provider of analytical solutions
for your analysis, characterization, and testing needs on materials. Expert-level consultation, first-class services, state-of-theart instruments and customer satisfaction are the four pillars of
our outstanding lab services. Contact us for your lab service
support in R&D, QC, process control, and failure analysis.
www.ebatco.com
EDAX Inc.
Booth #614 EDAX is a leading provider of innovative materials characterization systems encompassing Energy Dispersive
Spectrometry (EDS), Wavelength Dispersive Spectrometry
(WDS), Electron Backscatter Diffraction (EBSD), and Micro Xray Fluorescence (XRF). The company designs, manufactures,
distributes, and services hardware and software solutions for a
broad range of industries, educational institutions, and research
organizations. www.edax.com
Electron Microscopy Sciences
Booth #310 Since our beginning over 25 years ago, Electron
Microscopy Sciences has been specializing in the manufacturing, preparation, and distribution of only the highest quality
chemicals, supplies, and equipment for microscopy and all of its
related fields. Our steady and consistent growth has been based
not only on our quality products and prompt friendly service, but
also on the trust that you, our valued customers, have placed in
us to give you the best value in the market place.
www.emsdiasum.com
EMSL Analytical Inc.
Booth #209 EMSL Analytical Inc., the nation’s leading environmental testing firm, has been providing quality and innovative laboratory services under the same private ownership and
leadership for 32 years. The Materials Science DivisionSM was
established to help clients develop solutions to challenges in
manufacturing, quality assurance, and research and development. www.emsl.com
197
Materials Science & Technology 2014
company descriptions (As of 09/29/14)
Extrel
Booth #615 Extrel is the world’s leading manufacturer of research and process mass spectrometers, residual gas analyzers, and quadrupole mass spectrometry components. For 50
years, Extrel’s instruments have been recognized for exceptional
performance, reliability, and flexibility complemented by the
most comprehensive application, technical, and on-site support
in the industry. www.extrel.com
Gasbarre Products Inc.
Booth #505 Full-service design and manufacturing of capital
equipment for the particulate materials and thermal processing industries. Featuring Gasbarre Mechanical and Hydraulic
Presses, PTX-Pentronix High-Speed Presses, SIMAC Dry-Bag
Isostatic Presses, Gasbarre Furnace Group, including Sinterite,
C.I. Hayes and J.L. Becker, and Gasbarre Tool Group with McKee Carbide and Major Gauge and Tool. www.gasbarre.com
FEI Company
Booth #300 Our innovation and leadership enable customers to find meaningful answers to questions that accelerate
breakthrough discoveries, increase productivity, and ultimately
change the world. FEI Company designs, manufactures, and
supports the broadest range of high-performance workflows
that provide images and answers in the micro-, nano-, and
picometer scales. www.fei.com
Goodfellow Corporation
Booth #538 Goodfellow supplies small to medium quantities of
metals, alloys, ceramics, and polymers for research, development, and prototyping. Our web catalog lists a comprehensive
range of materials in many forms, including rods, wires, tubes,
and foils. There is no minimum order quantity and items are in
stock ready for immediate worldwide shipment. Custom-made
items are available to special order. www.goodfellowusa.com
Granta Design
Booth #304 Find out how we help materials engineers in industry to manage and use materials data and support educators to
teach materials across science, engineering, processing, and
design. Look for Granta speakers in the scientific program, talking on topics, including biomaterials and ICME. And stop by our
booth to pick up your pot of silly putty! www.grantadesign.com
GT Advanced Technologies Inc.
Booth #529 GT Advanced Technologies Inc. is a diversified
technology company with innovative crystal growth equipment
and solutions for the global solar, LED, and electronics industries. Our products accelerate the adoption of new advanced
materials that improve performance and lower the cost of
manufacturing. For additional information about GT Advanced
Technologies, please visit www.gtat.com.
Harper International
Booth #602 Harper International is a leader in complete thermal
processing solutions and services for the production of advanced materials. Harper is on the cutting edge of the most
innovative furnace and oven designs in the world, delivering
customized systems for processing at high temperatures up to
3000°C and in non-ambient atmospheres. www.harperintl.com
Hitachi High Tech America Inc.
Booth #318 Hitachi High Tech America collaborates with its
customers to provide technologically advanced imaging to the
materials science, biological research, academic, and industrial
manufacturing sectors. Our innovative and reliable instrumentation includes SEM, analytical and biological TEM, dedicated
STEM, FIB, tabletop microscopes, and microanalysis sample
prep systems. www.hitachi-hta.com
198
Careers
with a
Spark
Commercial Metals Company
Spark Your Career Path with CMC
Are you looking for a career with an edge? Want to work with a company that
values your talents and encourages growth?
CMC offers great achievement and advancement opportunities, both
in personal and professional growth. Fire up your career path with a
company that challenges conventional thinking, promotes teamwork,
requires accountability, and rewards success!
Why CMC?
We take pride in recruiting the best talent available for every facet
of our business. Our success comes directly from our energetic and
entrepreneurial team, enabling us to remain a leader in the
metal industry.
Start your future with CMC. Stop by booth T6 today to
learn about available exciting opportunities!
Scan the QR code to see
current job opportunities
or visit www.cmc.com
Materials Science & Technology 2014
company descriptions (As of 09/29/14)
HORIBA Scientific
Booth #428 HORIBA Scientific is the world-leading manufacturer of high performance spectroscopic instrumentation. We
offer elemental analyzers, GD Spectrometers, and products for
Raman, Fluorescence, Photoluminescence, particle characterization, XRF, spectroscopic ellipsometry, atomic emission spectroscopy, optical components, gratings and high performance
CCDs, and modular TCSPC components.
www.horiba.com/scientific
Hysitron Inc.
Booth #514 As the world leader in nanomechanical metrology,
Hysitron® is dedicated to the development of next-generation
test instruments with unparalleled sensitivity for mechanical testing at the smallest scale. Hysitron Inc. is continuously
redefining what is possible for microelectronics characterization,
materials R&D, failure analysis, and process control.
www.hysitron.com
International Centre for Diffraction Data (ICDD)
Booth #616 ICDD’s databases are designed for rapid materials identification and interfaced with diffractometers and data
analysis systems of the world’s leading software developers and
manufacturers of x-ray equipment. The Powder Diffraction File is
available in PDF-2 Release 2012, PDF-4+ 2012, PDF-4/Minerals
2012, and PDF-4/Organics 2013. www.icdd.com
JEOL USA Inc.
Booth #501 High res EMs & tools for materials, failure analysis, forensics, product inspection, nanotech & semicon R&D:
Correlative microscopy solutions; LV & FE-SEMs - observation/
analysis; Surface Analyzers - materials characterization; TEMs
- atomic-level imaging & high-speed mapping; Sample prep;
Applications & Service – expertise. www.jeolusa.com
Kalamazoo Industries Inc.
Booth #232 Kalamazoo Industries Inc. manufactures abrasive
metallurgical sectioning saws, belt sanding/polishing machines
for metallurgical inspection, vibratory finishers, 5C collet workholding since 1960. In Kalamazoo, Michigan. Special machines
can be made to customer specifications. Sample cuts can be
made and returned to help with selecting the correct machine
for the job. www.kalamazooind.com
Keysight Technologies
Booth #201 Keysight provides a range of atomic spectroscopy,
elemental analysis, molecular spectroscopy, microscopy &
nanomechanical testing solutions for analysis/measurement of
materials for semiconductor, metallurgy, polymer, composites,
and coating applications. In addition to the highest performing
instrumentation. wwwkeysight.com
Join A Global Leader in
Specialty Alloy
Manufacturing, Distribution
and Materials Innovation
Recognized for our technical expertise, Carpenter Technology Corporation has more than a century of
experience as a manufacturer of specialty alloys, including stainless steels, high-strength alloys,
high-temperature alloys, magnetic and controlled expansion alloys, medical alloys, superalloys and
•
•
•
•
•
•
200
True R&D effort to develop new alloys and products.
Large enough to provide you with professional growth and advancement.
Small enough to recognize and appreciate personal contribution.
A work environment that is diverse in its challenges and its opportunities.
An interest in innovative thinkers who will contribute to our international growth.
Competitive salary and comprehensive benefits package.
EXPERTISE ACROSS THE SPECTRUM
MTS High Temperature Standard Solutions
» Superior Performance
» Application-Specific Thermal Subsystems
» Complete Turnkey Solutions
Materials Science & Technology
2014 Conference & Exhibition
David L. Lawrence Convention Center
Pittsburgh, PA
October 12-16
BOOTH 337
©2014 MTS Systems Corporation.
Low Cycle Fatigue Test System
MTS is a registered trademark and MTS Landmark
is a trademark of MTS Systems Corporation in the
United States. These trademarks may be protected
High Cycle Fatigue Test System
in other countries. RTM No. 211177.
M AT E R I A L S T E S T I N G S O L U T I O N S
www.mts.com • [email protected]
Materials Science & Technology 2014
company descriptions (As of 09/29/14)
Kurt J. Lesker Company
Booth #408 World leader in plasma and thin film deposition
technology and vacuum coating for materials discovery and
molecular engineering. Expertise in pulsed cathodic arc, magnetron sputtering, electron beam and thermal evaporation, and
ALD for your materials research challenges. Extensive inventory
of sputtering and evaporation materials available for same-day
shipment. www.lesker.com
Metcut Research Inc.
Booth #508 We provide comprehensive mechanical property
and microstructural evaluation testing services for metals, nonmetallics, and composites to the aerospace, power generation,
ground transportation, and biomedical industries. We also offer
structural component testing capabilities. Our laboratories include Metcut Research Inc., Cincinnati Testing Laboratories, and
Metcut Rechérches (France). www.metcut.com
Lab Synergy LLC
Booth #519 Lab Synergy LLC brings you World Leadership in
Sample Preparation, Analysis, and Measurement. Lab Synergy
is an exclusive, full-service, applications based, North American
distributor for leading laboratory instrument manufacturers. Lab
Synergy takes a synergistic approach to satisfying customer
needs. www.labsynergy.com
Micromeritics Instrument Corporation
Booth #301 Micromeritics manufactures automated analytical
laboratory instruments that measure physical characteristics of
powder and solids for fundamental research, product development, quality assurance/control, production, and process control applications. Measurements obtained include particle size,
particle shape, surface area, pore volume, pore size and pore
size distribution, material density, catalytic activity, and temperature-programmed reactions. www.micromeritics.com
Lapmaster International LLC
Booth #526 Lapmaster is proud to offer a complete line of
sample preparation equipment, hardness testers, microscopes,
imaging solutions, and supplies to meet all metallographic and
materials testing needs. You can trust Lapmaster to provide the
best solution for your application delivering unmatched performance and reliability. www.lapmaster.com
LECO Corporation
Booth #400 LECO provides a complete line of instrumentation for materials characterization, including elemental analysis,
metallographic sample preparation, optics, image analysis and
management, hardness testing, and related accessories, plus
extensive field and in-house support services. For information,
visit www.leco.com
Maney Publishing
Booth #621 Maney Publishing publish highly regarded, peerreviewed journals covering both niche and general topics in materials research, mineral resources, physical metallurgy, and engineering. Coverage ranges from fundamental research to new
materials for electronics, energy, and biomedicine and extends
from fabrication, processing, and characterisation of materials to
properties and performance. www.maneypublishing.com
Metal Samples Company
Booth #601 Mechanical test specimens to evaluate various
properties of materials. Tensile, fracture mechanics, and other
type specimens machined to ASTM, NACE, or customer-defined
specifications. Large inventory of certified material or use customer-supplied material. Precision machining and laser services.
www.metalsamples.com
202
Microtrac
Booth #221 Microtrac, a global pioneer of particle characterization systems, will be showcasing its complete portfolio of innovative, reliable, and repeatable instruments and sample dispersion accessories. Microtrac’s portfolio includes Laser Diffraction,
Dynamic Light Scattering, and Image Analysis instruments that
can quickly measure wet or dry samples. www.microtrac.com
MTI Corporation
Booth #420 Since 1994 MTI corporation has been providing a total solution for materials research labs, such as crystal
substrates, cutting saw, polisher, high temperature box / tube
furnaces, mixers, pressers, CIP, PVD film coaters, CSS, glove
boxes, RTP furnaces, multi-channel CVD systems, as well as
compact XRD and equipment for battery research labs.
www.mtixtl.com
MTS Systems Corporation
Booth #337 Engineers and researchers worldwide rely on MTS
for the versatile, high-performance testing technology, systems
integration expertise and responsive support they need to
pursue research and development of a broad spectrum of advanced materials, including metals, composites, ceramics, and
polymers. www.mts.com
Nanovea
Booth #224 Nanovea designs and manufactures 3D profilometers, mechanical testers, and tribometers to combine the most
advanced surface testing capabilities. Unlike other manufactures of testing equipment, Nanovea also provides lab testing
services. www.nanovea.com
October 4 – 8, 2015 |
Greater Columbus Convention Center
|
Columbus, Ohio USA
MS & T 15
M at e r i a l s S c i e n c e & T e c h n o l o g y
Reserve your space today for MS&T15
Sell your products and services to the most comprehensive group of decision
makers involved in materials science and engineering technologies!
Exhibition Dates & Times*
Tuesday, October 6, 2015
Exhibition
11:00 a.m. – 6:00 p.m.
Exhibit Hall Concessions:
Lunch on the Show Floor
12:00 – 2:00 p.m.
Happy Hour
4:00 – 6:00 p.m.
Wednesday, October 7, 2015
Exhibition
Poster Session
Exhibit Hall Concessions:
Lunch on the Show Floor
9:00 a.m. – 2:00 p.m.
11:00 a.m. – 1:00 p.m.
11:30 a.m. – 2:00 p.m.
*Times are tentative and subject to change
Booth Rental Rate: 10' x 10' space is $2,850 at MS&T14, $2,950 after
October 10, 2014. Corner Booth Surcharge: $100 per corner.
Rental Includes:
· 1 Technical Session Badge
· Unlimited Exhibitor Staff Badges
· Draped 8' back wall and 3' side rails
· One-line Booth ID Sign
· E-Invite Complimentary Expo Only Badge
· Company listing in online and printed Show Directory
· Post-Attendee List following the Event
Contact a representative to reserve your space!
Mona Thiel
(614) 794-5834
[email protected]
Beth Kirschner
(724) 814-3030
[email protected]
Kelly Thomas
(440) 338-1733
[email protected]
Caron Gavrish
(724) 814-3140
[email protected]
203
Materials Science & Technology 2014
company descriptions (As of 09/29/14)
Netzsch Instruments North America LLC
Booth #500 Thermal analysis, thermal properties, calorimetry,
and contract testing services; DSC, DTA, TGA, STA (Simultaneous DSC/DTA-TGA) from cryogenic to +2400C, evolved gas
analysis by coupled FTIR&MS&GC-MS, specific heat measurement, Dilatometers, DMA, DEA, TMA, thermal expansion,
thermal conductivity, thermal diffusivity, and more.
www.netzsch-thermal-analysis.com
Newport Corporation
Booth #220 Newport Motion, over 50 years supplying microprecision motion control products and expertise to industry,
from standard linear, rotation stages, actuators, and controllers
to specialized air bearings and custom motion systems. Addressing demanding applications in semiconductor, metrology,
inspection, and research that require micron or nanometer precision and global support and service. www.newport.com
I N T E R N A T I O N A L
C E N T R E
Make the SMART move
to PDF-4+
NGimat LLC
Booth #429 nGimat LLC specializes in nanomaterials R&D
and manufacturing for the energy, electronics, consumer, and
biomedical industries. nGimat LLC’s NanoSpray Combustion
technology enables low-cost and high volume manufacturing of
nano-engineered materials, including complex multi-metal oxide
ceramic powders. Please visit booth 429 for more information,
or go to www.ngimatllc.com/product to view our complete line
of ceramic powder products.
NIST
Booth #609 NIST Standard Reference Materials supports accurate/compatible measurements by certifying and providing over
500 SRMs with well-characterized composition or properties,
or both. Standard Reference Data provides well-documented
numeric data for use in technical problem-solving, research, and
development. The Calibration Services are designed to help in
achieving high levels of measurements. www.nist.gov/srm
F O R
S
M
A
R
T
D I F F R A C T I O N
Standardized data
D A T A
More coverage
All data sets are evaluated for quality
Reviewed, edited and corrected prior to publication
Targeted for material identification and characterization
PDF-4+ 2014 features over 354,200 entries including
239,000+ entries with atomic coordinates
VISIT US AT MS&T
BOOTH #616
ICDD databases are the only crystallographic
databases in the world with quality marks and
quality review processes that are ISO certified.
ICDD, the ICDD logo and PDF are registered in the U.S. Patent and Trademark Office.
Powder Diffraction File is a trademark of JCPDS—International Centre for Diffraction Data.
©2014 JCPDS—International Centre for Diffraction Data.
204
company descriptions (As of 09/29/14)
Novelis
Tabletop 10 Novelis is the world leader in rolled aluminum products, delivering unique solutions for the most demanding global
applications, such as beverage cans, automobiles, architecture,
and consumer electronics. Our unique material advantage,
customer-focused innovation, and unparalleled commitment to
sustainability define the Novelis brand. www.novelis.com
NSL Analytical Services Inc.
Booth #620 A recognized leader in material testing, NSL Analytical Services Inc. is an accredited, independent, commercial
testing laboratory providing inorganic elemental and organic
chemical analysis, mechanical testing, metallurgical/microscopy
evaluations, and polymer materials testing. NSL helps customers achieve the highest standards of product quality from design
to launch by providing accurate, reliable, and repeatable material testing. www.nslanalytical.com
Fibrous
Ceramic
Oxide
Insulation
Up To
2200 °C
Nucor Corporation
Tabletop 7 Nucor is made up of more than 20,000 teammates
whose goal is to TAKE CARE OF OUR CUSTOMERS. We are
accomplishing this by being the safest, highest quality, lowest cost, most productive, and most profitable steel and steel
products company in the world. We are committed to doing this
while being cultural and environmental stewards in our communities where we live and work. We are succeeding by working
together. www.nucor.com/careers
Objects Research Systems Inc.
Booth #315 Object Research Systems Inc. is a privately owned
software development company headquartered in Montreal,
Canada. Since its founding in 2004, ORS has evolved to set
the industry standard for advanced visualization solutions for
the clinical, scientific investigation, and OEM industries. The
company’s core brands include ORS Visual, ORS Visual SI, ORS
OEM, and ORS PDK. www.theobjects.com
High Temperature Products from
Alumina to Zirconia
Ceramic Oxides
Alumina • Ceria • Hafnia • Yttria • Zirconia • Custom
Forms
Boards • Cylinders • Felt • Cloth • Powder • Bulk Fiber • Grog
Request Samples Today
Low K • Highly Refractory • Machinable
Zircar Zirconia, Inc.
P.O. Box 287
Florida, NY 10921
web: zircarzirconia.com
email: [email protected]
(845) 651-3040
Manufacturer of the Original ZIRCAR Products
205
Materials Science & Technology 2014
company descriptions (As of 09/29/14)
Ocean Optics
Booth #524 Since 1992, Ocean Optics has been developing
and manufacturing the highest quality, most innovative products
for optical sensing and more. Our spectrometers and complementary technologies have traveled to the moon, inside active
volcanoes, through rain forests, and to the top of Mount Everest.
Finding your answer begins with Ocean Optics.
www.oceanoptics.com
Olympus
Booth #225 Olympus IMS–Industrial Microscopy & Metrology
is a leader in industrial microscopy, with its recognized innovation, optical quality, customer support, and training. Olympus
industrial microscopes and metrology systems play a vital role in
precision R&D, engineering, and manufacturing applications in
fields as diverse as the semiconductor, photovoltaics, electronics, materials science/metallurgy, medical device, aerospace,
and automotive arenas. Olympus systems are designed and
manufactured according to rigorous ISO 9001 and ISO 14001
international standards, demonstrating a commitment to offering
the highest quality products and services, with minimal environmental impact. www.olympus-ims.com
Orton Ceramic Foundation
Booth #226 The Edward Orton Jr. Ceramic Foundation serves
the global materials industry providing products for thermal
process verification, instruments, and materials testing services.
Thermal processing verification materials. Instruments: Dilatometers, glass softening and annealing, viscometers. Testing: Glass
and ceramics thermal and mechanical properties. More information at www.ortonceramic.com
Oxford Instruments
Booth #600 Oxford Instruments provides the leading-edge tools
that enable material characterization and sample manipulation in
research and development activities across a range of academic
and industrial applications, including semiconductors, renewable energy, mining, metallurgy, and forensics. Getting the right
results in real-time, our technologies include AFM, EDS, EBSD,
WDS, EBIC, and GIS. www.oxford-instruments.com
PANalytical
Booth #603 PANalytical: innovation leader for x-ray diffraction (XRD) and x-ray flourescence (XRF) solutions. Come hear
about Empyrean, a true optical bench for XRD/CT, and the cost
effective X’Pert Powder system. XRF innovations include no
drift ZETA technology tubes for AxiosmAX and new benchtop
Epsilon3XL. www.panalytical.com
206
Photron USA Inc.
Booth #521 Photron manufactures high speed cameras for
slow motion analysis of events or phenomena occurring too
fast for the eye to see. Recording at frame rates up to two million frames per second (fps), our cameras are ideal for crack
propagation, failure analysis, and Digital Image Correlation (DIC)
applications among others. www.photron.com
Pittcon 2015
Booth #626 This dynamic global event offers a unique opportunity to get a hands-on look at the latest innovations and to find
solutions to all your laboratory challenges. The robust technical
program offers the latest research in more than 2,000 technical
presentations covering a diverse selection of methodologies and
applications. Pittcon also offers more than 100 short courses in
a wide range of topics and the once-a-year chance to network
with colleagues. www.pittcon.org
Powder Processing & Technology
Booth #427 Powder Processing & Technology performs process
development and contract manufacturing on a wide range of
ceramic and inorganic chemical powders. The company has a
fully equipped pilot plant as well as multiple production areas
specializing in spray drying, calcining, and firing to serve its
clients in various industries. www.pptechnology.com
Proto Manufacturing Ltd.
Booth #308 Proto Manufacturing is a leading provider of portable and laboratory based x-ray diffraction systems and services,
including powder diffraction systems, Laue single crystal orientation systems, fine focus x-ray tubes, custom x-ray diffraction
systems, XRD residual stress & retained austenite measurement,
electropolishers. Proto Manufacturing also provides measurement services through its ISO 17025 accredited laboratory in
Taylor, Michigan, and internationally in Canada, Japan, China,
and India. 1 (313) 965-2900 | [email protected].
www.protoxrd.com
Pulstec Industrial Co
Booth #618 Ever since Pulstec was established, our strategy
has been for “research & development oriented manufacturing” contributing to innovative development within the industrial
community. Our personnel have therefore striven to develop
their skills, keeping up to date with advances in technology,
enabling Pulstec to focus on the research and development of
products that our customers require. www.pulstec.co.jp
Founding partner ACerS
April 28-30, 2015
Cleveland, Ohio
the manufacturing tradeshow
for advanced ceramic materials
and technologies
join the companies
already exhibiting:
METSCH REFRACTORIES INC.
METSCH REFRACTORIES INC.
METSCH REFRACTORIES INC.
2015 exhibition & sponsorship
opportunities available
book now
exhibition space limited
[email protected]
www.ceramicsexpousa.com
207
Materials Science & Technology 2014
company descriptions (As of 09/29/14)
Renishaw
Booth #305 Renishaw provides a wide range of optical spectroscopy products, including Raman microscopes, compact
process monitoring Raman spectrometers, Raman analysers for
scanning electron microscopes, lasers for spectroscopy, and
state-of-the-art cooled CCD detectors. Renishaw has over 40
Raman spectroscopy systems deployed in Canada.
www.renishaw.com
Rigaku Americas Corporation
Booth #625 Rigaku provides the world’s most complete line of
x-ray diffraction and x-ray fluorescence instruments and components. Systems include the MiniFlex benchtop XRD, Supermini
benchtop WDXRF systems, SmartLab® multi-purpose diffractometers with SAXS and in-plane capabilities, DMAX Rapid II
micro-diffraction systems, SMAX3000 small angle scattering
systems, and ZSX Primus series of high-powered WDXRF spectrometers. www.rigaku.com
RJ Lee Group
Booth #431 As a foremost materials characterization laboratory, RJ Lee Group, Inc. delivers scientific resolution using the
analytical and consultative approach of industrial forensics.
www.rjlg.com
Robocasting Enterprises LLC
Booth #316 Robocasting Enterprises LLC is a leader in 3-D
printing of functional ceramics. Since 2007, Robocasting has
produced millions of parts and transformed 3-D printing into
a versatile manufacturing process. Robocasting specializes in
producing revolutionary lattice structures as advanced alternatives to reticulated foams and economical crucibles for thermal
analysis and labware. www.robocasting.net
SAMCO Technologies Inc.
Booth #426 SAMCO has a distinguished history of providing
innovative and cost effective solutions to meet our customer’s
needs. The company management has been in the water,
wastewater, and process filtration business. We manufacture
most of the equipment needed to do the project, enabling us
to custom design your system and optimize the integration of
equipment. www.samcotech.com
Saudi Aramco
Booth #327 Owned by the Saudi Arabian Government, Saudi
Aramco is a fully integrated, global petroleum enterprise. The
company manages proven conventional reserves of 260.2 billion
barrels of oil and the fourth-largest gas reserves in the world,
284.8 trillion cubic feet. www.aramco.jobs
208
Sente Software Ltd.
Booth #510 Featuring JMatPro, an innovative, user-friendly, and
extensively validated simulation software program. Model a wide
range of material properties and behavior for multi-component
alloys used in industrial practice. Data export available to casting, forming, forging, and heat-treating simulation packages.
Consultancy also available. www.jmatpro.com
Setaram Instrumentation
Booth #636 Setaram Instrumentation is a leading manufacturer
and supplier of high-performance thermal analyzers, calorimeters, gas sorption and high pressure mass spectroscopy
instruments and offers complete and dedicated solutions for
different applications such as Pharmaceuticals & Life Science,
Advanced Materials, Energy, Process Safety, and much more.
www.setaram.com
Spectro Analytical Instruments
Booth #437 Spectro Analytical Instruments is a global leader in
the field of elemental analysis with ICP, ICP-MS, XRF, and OES
technology with an ability to analyze a wide variety of samples.
Our line of metal analyzers includes both portable and stationary
systems along with the handheld xSORT XRF system. Visit us at
www.spectro.com for more information.
Springer
Booth #515 Come and browse more than 120 key titles. Discover the benefits of eBooks, enjoy your 20% discount on print
books - or get printed eBooks for $24.95 with MyCopy. We are
proud to be the publishing partner for ASM and TMS, featuring
Metallurgical and Materials Transactions A & B. Springer, your
partner in publishing. www.springer.com
SSAB Americas
Tabletop 12 SSAB is a global leader in value added, high
strength steel leading the way in design, innovation, technology, as well as environmental responsibility. Our products are
produced in both Sweden and the USA, which allows us to supply an ever-growing number of markets across the entire world.
www.ssab.com
Struers Inc.
Booth #409 Struers Inc., the world leader in materialographic
solutions, provides an entire range of equipment and consumables for materialographic specimen preparation — from uncomplicated, manual machines to sophisticated, computerized
preparation equipment. Complementing its materialographic
products, Struers also sells an extensive line of hardness testers
and Zeiss microscopes providing a full range of comprehensive
lab solutions. www.struers.com
company descriptions (As of 09/29/14)
TA Instruments
Booth #418 TA Instruments provides innovative materials
characterization by thermal analysis, rheology, and calorimetry.
See our complete line of instruments for thermal conductivity and diffusivity by laser or xenon flash, heat flow meter, or
guarded hot plate. Learn about the latest in horizontal, vertical,
true-differential, and non-contact optical dilatometry and heating
microscopes. www.tainstruments.com
TEC
Booth #321 TEC provides portable residual stress and retained
austenite measurement equipment and laboratory services. Any
size part can be measured in house or in the field without the need
for destructive sectioning. TEC’s Materials Testing Services are
A2LA accredited and ISO 6011 registered. www.tecstress.com
Tekna Plasma Systems
Booth #628 Tekna Plasma Systems specializes in the development, design and construction of integrated plasma systems for
nanoparticle synthesis. These equipments are devoted to laboratory research or industrial-scale processes. Tekna Advanced
Materials offers high quality nanopowders. Tekna also offers
customized powder treatment services and plasma processed
powders in different materials and particle size distributions.
www.tekna.com
Tekscan USA
Booth #330 Tekscan USA manufactures ultra-thin pressure and
force measurement systems. Tekscan’s patented technology
has been incorporated into many successful OEM products, and
is well known in the Industrial field for its accuracy and cost-effectiveness. Products range from simple force sensing systems
to highly complex systems with over 100,000 sensing points.
www.tekscan.com
Tescan USA
Booth #516 Tescan USA is a leading supplier in North America
of scanning electron microscopes and focused ion beam workstations. The quality, performance, and reliability of our products
are the foundation of our business. We serve the academic,
industry, and government markets. Stop by our booth at MS&T
2014 to learn more. www.tescan-usa.com
Tev Tech
Booth #629 TevTech offers custom designed high temperature
vacuum furnace solutions. Whether your goal is bringing new
materials to market or improving a current process, TevTech’s
expertise in high temperature vacuum furnace systems will help
to meet your goals. Our furnace and subsystem designs will
help you keep your equipment in production mode. TevTech has
the skill and experience to help you scale a materials process
from laboratory experiments to pilot-line and then to full scale
production. www.tevtechllc.com
The Kerry Company
Booth #219 The Kerry Company Inc. is the manufacturer of the
KERRY ACTUATOR. The KERRY ACTUATOR is a unique concept designed to join together the advantages of conventional
electrical rams (compactness and easy installation) and the
advantages of hydraulics (smooth linear motion, adjustability,
safety, and reliability). www.kerryacuator.com
Thermcraft Inc.
Booth #520 Thermcraft Inc. is an international leading manufacturer of laboratory and industrial furnaces and ovens. With 43
years of furnace and oven manufacturing experience, we can
help you find a solution that best meets your needs. Choose
from standard products or fully customized solutions. At Thermcraft, customer service is our #1 priority!
www.thermcraftinc.com
Thermo Fisher Scientific
Booth #525 The world leader in innovation for material research
and characterization, Thermo Fisher Scientific enables scientists to advance their field of expertise, improve manufacturing
processes, and enhance people’s lives. The Thermo Scientific™
NORAN™ System 7 offers the best performance for high resolution, low voltage SEM/TEM X-ray microanalysis. For surface
analysis, our line of XPS spectrometers with dual-beam ion
source depth profiling brings new capabilities in the analysis of
organic and inorganic layered microelectronics and ultra-thin
films. www.thermofisher.com
Thermo-Calc Software
Booth #314 A leading developer of software and databases
for computational thermodynamics and diffusion simulations
for multicomponent systems. Thermo-Calc: a powerful tool for
thermodynamic calculations. DICTRA: a unique tool for accurate
simulations of diffusion controlled transformations. TC-PRISMA:
a new tool for predictions of precipitation kinetics.
www.thermocalc.com
Tunable Materials Co. Ltd
Booth #332 Tunable Materials, based in Suzhou Industrial Park,
China, uses a flexible proprietary process to produce polymeric
ceramic precursors and nano-ceramic powders. The production
technology allows compositions of composite ceramic precursors and powders to be controlled and adjusted. The proprietary
technology thus provides a means to modify properties of multiphase ceramics, and brings one step closer the prospect of
tuning properties of ceramic materials to suit specific application
needs. Major products include Zr-Si precursors and powders,
particularly those for ultra-high temperature applications.
www.tunacera.com
209
Materials Science & Technology 2014
company descriptions (As of 09/29/14)
UES Inc.
Booth #303 UES is an innovative science and technology company providing industry & government customers with superior
R&D expertise and state-of-the-art products. RoboMet.3D is a
fully automated, serial sectioning system that generates twodimensional data for three-dimensional reconstruction. RoboMet.3D enables more time for data analysis and characterization
and ensures repeatable and accurate data is collected in an
efficient and cost-effective manner. www.ues.com
US Steel
Tabletop 14 United States Steel Corporation, headquartered
in Pittsburgh, Penn., is an integrated steel producer focused
on high value-added flat-rolled and tubular steel products that
are required by manufacturers in the automotive, appliance,
container, construction, industrial machinery, and oil and gas
industries. www.ussteel.com
Union Process Inc.
Booth #605 Original inventors of Attritor technology, Union
Process Inc. manufactures a broad line of size reduction equipment, including wet/dry/inert/cryo grinding Attritors as well as
the DMQX-series ultra-fine grinding horizontal bead mill. Our lab
services include lab and pilot plant R&D, tolling, process optimization, and particle characterization. www.unionprocess.com
United Testing Systems Inc.
Booth #530 With nearly 50 years in business, United has become
one of the world’s premier manufacturers of state-of-the-art material testing systems. United offers universal testing machines for
compression and tensile testing, hardness testers, material test
fixturing accessories and software, and related calibration services throughout the U.S. and internationally through a network of
factory authorized representatives. www.tensile.test.com
Unitron
Booth #333 UNITRON® specializes in high quality, precision
instruments for industrial, metallurgical, materials science, research, educational, forensics and digital imaging applications.
Since 1952, Unitron’s microscopes and related optical accessories have been consistently used and trusted worldwide in prestigious companies. For additional information, please contact
Heston Singh at (888) 289-2228 or [email protected].
Vacuum Technology Inc.
Booth #227 Vacuum Technology Inc. is a US based manufacturer that is committed to developing innovative products
for clients around the world. With its North American facility in
Gloucester, Massachusetts USA, VTi offers UL certified products
of Super Purified Glove Boxes, Gas Purification Systems and
various Accessories to be integrated into glove box, such as
210
Evaporator, Spin Coater, Freezer, Cold Well, Microscope Unit.
We are proud of our strong ability to work with clients to create
custom solutions. VTi integrates research, manufacturing, sales
and customer service with the goal of becoming a world-class
leading company. www.vacuumtechnology.com
Verder Scientific Inc.
Booth #309 Verder Scientific Inc. sets the standards in hightech scientific equipment for quality control, research, and development. The company manufactures and supplies laboratory
instruments for sample preparation and heat treatment of solid
materials. Comprised of the Retsch/Carbolite product brands,
Verder Scientific Inc. is the market leader in sample preparation
and treatment. www.Verder-Scientific.com
Westmoreland Mechanical Testing & Research
Booth #215 WMT&R is a world leader in testing materials for
the aerospace, automotive, nuclear, and medical industries. Our
personnel are professionals with the wealth of knowledge and
depth of experience to meet the global testing requirements of
customers since 1967. For information concerning testing or
career opportunities, please visit www.wmtr.com
Wiley
Booth #416 Wiley is the leading society publisher. We publish
on behalf of more societies and membership associations than
anybody else, and offer libraries and individuals 1250 online
journals, thousands of books and e-books, reviews, reference
works, databases, and more. For more information please visit
www.wiley.com, or stop by our booth at MS&T.
Zircar Ceramics Inc.
Booth #527 Zircar Ceramics Inc. is a producer of ceramic fiber
based low-mass high temperature thermal and electrical insulation products. Compositions for use at temperatures as high as
1825C. Includes rigid boards and cylinders, flexible blankets,
papers, textiles, coatings and adhesives with a special emphasis on precision custom CNC machined components.
www.zircarceramics.com
products and services index
Product/Services Index Header
Booth#
CERAMIC PROCESSING EQUIPMENT
Coating/Glazing
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Powder Processing & Technology. . . . . . . . . . . . . . . . . . . . . . . . 427
Controllers
Thermcraft Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520
Dryers
Applied Test Systems Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
Centorr Vacuum Industries Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . 432
Gasbarre Products Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505
Thermcraft Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520
Furnaces
Applied Test Systems Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
Centorr Vacuum Industries Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . 432
CM Furnaces Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
Gasbarre Products Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505
Harper International. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 602
MTI Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Thermcraft Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520
Hydraulic Pressing
Gasbarre Products Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Inspection/QC
Angstrom Scientific Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
Kilns
Centorr Vacuum Industries Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . 432
Harper International. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 602
Thermcraft Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520
Mixers/Mills/Grinders
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Molding
Particle Reduction
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Presses (Mechanical, Hydraulic, Compacting)
Gasbarre Products Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
CERAMICS
Additives
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Cements
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Ceramic & Metallic Powders/Materials
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Kurt J. Lesker Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408
Product/Services Index Header
Booth#
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Ceramic Matrix Composites (CMCs)
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Clay & Natural Minerals
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Coatings
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Components
AdValue Technology LLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Tekscan USA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
Cutting Tools
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Electronic Ceramics
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Powder Processing & Technology. . . . . . . . . . . . . . . . . . . . . . . . 427
Glass
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Optical Fibers
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Refractory Ceramics
AdValue Technology LLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Single Crystals
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
COMMERCIAL MATERIALS TESTING/CHARACTERIZATION
SERVICES
Commercial Materials Testing
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
Alfred University. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
Harper International. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 602
HORIBA Scientific. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
Hysitron Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
Metcut Research Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 508
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
211
Materials Science & Technology 2014
products and services index
Product/Services Index Header
Booth#
NETZSCH Instruments North America LLC. . . . . . . . . . . . . . . . . 500
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
NSL Analytical Services Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 620
Proto Manufacturing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
Orton Ceramic Foundation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
TA Instruments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418
TEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
Tekscan USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Load Cell Calibrations
Applied Test Systems Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
Tekscan USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
Product/Services Index Header
Booth#
Lubrication and Hydraulics
Maintenance and Reliability
Harper International. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 602
Modeling Processes
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Plant Engineering
Power and Utilities
Safety and Health
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
ELECTRONICS
Electronic Materials
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Kurt J. Lesker Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408
Powder Processing & Technology. . . . . . . . . . . . . . . . . . . . . . . . 427
Tescan USA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 516
Tekscan USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
ENGINEERING APPLICATIONS AND RELATED INTERESTS
Atmosphere Equipment/Control
Extrel CMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615
Harper International. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 602
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Electrical Engineering
CM Furnaces Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
HEAT TREATING EQUIPMENT & SERVICES
Commercial Heat Treating Services
Alfred University. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
CM Furnaces Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
Consumables
AdValue Technology LLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Heat Treating Equipment
Applied Test Systems Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
Centorr Vacuum Industries Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . 432
CM Furnaces Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Gasbarre Products Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505
LECO Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Thermcraft Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520
Energy/Combustion
Extrel CMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Equipment Design
Applied Test Systems Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
CM Furnaces Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
Harper International. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 602
Tekscan USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
Thermcraft Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520
Equipment Manufacturing (OEM)
Applied Test Systems Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
CM Furnaces Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Harper International. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 602
HORIBA Scientific. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
Tekscan USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
Thermcraft Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Industrial Gases
Extrel CMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615
MACHINING & METAL CUTTING EQUIPMENT
Cutting Tools
Allied High Tech Products Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . 415
LECO Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
MATERIALS TESTING/CHARACTERIZATION EQUIPMENT &
SUPPLIES
Color Analysis
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
HORIBA Scientific. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Consumables
AdValue Technology LLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Allied High Tech Products Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . 415
LECO Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
Controllers
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
212
products and services index
Product/Services Index Header
Booth#
Corrosion Testing
CM Furnaces Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Metal Samples Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Creep Testers
Applied Test Systems Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
Centorr Vacuum Industries Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . 432
CM Furnaces Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
Hysitron Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
Orton Ceramic Foundation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
TA Instruments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418
Thermcraft Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520
Extensometers
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
Applied Test Systems Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
CM Furnaces Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
Failure Analysis
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
Angstrom Scientific Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
Carl Zeiss Microscopy, LLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401
Clemex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425
E.A. Fischione Instruments, Inc. . . . . . . . . . . . . . . . . . . . . . . . . . 205
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
FEI Company. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
Hitachi High Tech America Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . 318
HORIBA Scientific. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
Hysitron Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
LECO Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
NSL Analytical Services Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 620
Oxford Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600
Proto Manufacturing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
TEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
Thermcraft Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520
Fatigue Testers
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
Applied Test Systems Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
Centorr Vacuum Industries Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . 432
CM Furnaces Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
HORIBA Scientific. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
Hysitron Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
Metal Samples Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Product/Services Index Header
Booth#
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Thermcraft Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520
Fractures Toughness Testing Equipment
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Hysitron Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
LECO Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
Metal Samples Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
Thermcraft Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520
Glass Testing
HORIBA Scientific. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
Hysitron Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
LECO Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
Orton Ceramic Foundation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
TA Instruments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418
Hardness Testing Equipment
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
Allied High Tech Products Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . 415
Angstrom Scientific Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
Buehler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509
Clemex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
HORIBA Scientific. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
Hysitron Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
LECO Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
NSL Analytical Services Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 620
Image Analyzers
Angstrom Scientific Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
Buehler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509
Clemex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
HORIBA Scientific. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
LECO Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Impact Testers
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
NSL Analytical Services Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 620
Tekscan USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
Materials Selection
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Extrel CMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
213
Materials Science & Technology 2014
products and services index
Product/Services Index Header
Booth#
Mechanical Testing (including hardness)
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
Allied High Tech Products Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . 415
Applied Test Systems Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
Buehler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
HORIBA Scientific. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
Hysitron Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
NSL Analytical Services Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 620
TA Instruments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418
Tekscan USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
Metallographic Specimen Preparation Equipment / Supplies
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
Allied High Tech Products Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . 415
Buehler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509
FEI Company. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
Hitachi High Tech America Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . 318
LECO Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Metallographs
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
Allied High Tech Products Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . 415
Carl Zeiss Microscopy, LLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401
Buehler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
LECO Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
Olympus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
Microelectronic Failure Analysis
Allied High Tech Products Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . 415
E.A. Fischione Instruments, Inc. . . . . . . . . . . . . . . . . . . . . . . . . . 205
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
FEI Company. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
Hysitron Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
Olympus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
Optical
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
AdValue Technology LLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405
Allied High Tech Products Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . 415
Angstrom Scientific Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
Buehler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509
Carl Zeiss Microscopy, LLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401
Clemex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425
E.A. Fischione Instruments, Inc. . . . . . . . . . . . . . . . . . . . . . . . . . 205
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
FEI Company. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
Hitachi High Tech America Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . 318
HORIBA Scientific. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
JEOL USA Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501
LECO Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Olympus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
Oxford Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600
Tescan USA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 516
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
214
Product/Services Index Header
Booth#
Moisture Analysis
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
LECO Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
TA Instruments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Optical and/or Electron Microscopy (SEM, TEM, etc.)
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
Angstrom Scientific Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
Carl Zeiss Microscopy, LLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401
E.A. Fischione Instruments, Inc. . . . . . . . . . . . . . . . . . . . . . . . . . 205
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
FEI Company. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
Hitachi High Tech America Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . 318
HORIBA Scientific. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
Hysitron Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
LECO Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
NSL Analytical Services Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 620
Olympus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
Oxford Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Particle Size Analysis
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
Angstrom Scientific Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
Carl Zeiss Microscopy, LLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401
Clemex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
FEI Company. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
Hitachi High Tech America Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . 318
HORIBA Scientific. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
LECO Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
NSL Analytical Services Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 620
Olympus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
Oxford Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Quality Control
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
American Stress Technologies, Inc.. . . . . . . . . . . . . . . . . . . . . . . 502
Angstrom Scientific Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
Carl Zeiss Microscopy, LLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401
Clemex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
FEI Company. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
Hysitron Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
NSL Analytical Services Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 620
Olympus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
Oxford Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
TA Instruments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418
Verder Scientific. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
products and services index
Product/Services Index Header
Booth#
Residual Stress Analyzers / Testers
American Stress Technologies, Inc.. . . . . . . . . . . . . . . . . . . . . . . 502
HORIBA Scientific. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
Hysitron Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
LECO Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
Proto Manufacturing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
TEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
Tensile Testers
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
Angstrom Scientific Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
Applied Test Systems Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
Centorr Vacuum Industries Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . 432
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Hysitron Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
Metal Samples Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
NSL Analytical Services Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 620
TA Instruments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418
Test / Lab Furnaces / Environmental Chambers
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
Applied Test Systems Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
BINDER, Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
Centorr Vacuum Industries Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . 432
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Extrel CMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615
Harper International. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 602
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
Orton Ceramic Foundation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
Thermal Analysis
AdValue Technology LLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Extrel CMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615
HORIBA Scientific. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
LECO Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
NETZSCH Instruments North America LLC. . . . . . . . . . . . . . . . . 500
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
NSL Analytical Services Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 620
Orton Ceramic Foundation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
TA Instruments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418
Thermcraft Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520
Thickness Gages
Applied Test Systems Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
Torsion Testers
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
TA Instruments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418
Tribology
Hysitron Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
TA Instruments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418
Product/Services Index Header
Booth#
Ultrasonic Testing Equipment
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
Universal (Tension / Compression) Load Cell
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
Applied Test Systems Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
Universal (Tension / Compression) Testing Machines
Accutek Testing Laboratory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
Applied Test Systems Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
Centorr Vacuum Industries Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . 432
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
METALS & ALLOYS
Ferrous Metals
Cast Irons
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Coke/Coke Byproducts
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Dual Phase Steels
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Iron
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Long Products
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Other Specialty Ferrous Materials
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Plate Products
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Stainless Steels
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Steels, Carbon &/or Alloy
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Extrel CMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
215
Materials Science & Technology 2014
products and services index
Product/Services Index Header
Booth#
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Tool Steels
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Nonferrous Metals
Aluminum and Aluminum Alloys
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Biomaterials
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Extrel CMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Copper Alloys
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Engineered Materials
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Heat Resistant Metals
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Intermetallics
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Magnesium Alloys
Angstrom Scientific Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Metal-Matrix Composites (MMCs)
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Nickel-, Nickel-Iron-, and Cobalt-Base High-Performance
Alloys
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Other Nonferrous Metals
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Refractory Metals
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
216
Product/Services Index Header
Booth#
Superalloys
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Titanium Alloys
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Vanadium
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Powder Metallurgy (P/M) Materials
Ceramic & Metallic Powder
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Kurt J. Lesker Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Powder Processing & Technology. . . . . . . . . . . . . . . . . . . . . . . . 427
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Other Ferrous Metal Powders
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Other Nonferrous Metal Powders
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Porous & Foamed Metals
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Refractory Metal Powders
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Silicon/Ferrosilicon
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Stainless Steel Powders
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
products and services index
Product/Services Index Header
Booth#
Steel Powders
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
OTHER MATERIALS
Electronic Materials
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Fuel Cells
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Extrel CMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Glass
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Nanomaterials
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Angstrom Scientific Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
Extrel CMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
Hysitron Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Polymer Matrix Composites
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Structural Plastics
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
OTHER SERVICES
Alternative Energy Providers
Saudi Aramco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327
Consulting Services
Alfred University. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
CompuTherm, LLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 604
MTS Systems Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
NANOVEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Contract R & D Services
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Alfred University. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
CompuTherm, LLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 604
Metcut Research Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 508
Orton Ceramic Foundation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Product/Services Index Header
Booth#
Environmental Services
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Extrel CMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Fuel Cells
Nanotechnologies
Hitachi High Tech America Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . 318
Kurt J. Lesker Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Tescan USA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 516
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Professional Society/Trade Association Publisher
Retained Austenite Measurements
Proto Manufacturing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
TEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
Software Providers
Carl Zeiss Microscopy, LLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401
CompuTherm, LLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 604
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
FEI Company. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
Granta Design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
PLASTICS
Advanced Composites
Tekscan USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
Engineering Plastics
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Polymers
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Goodfellow Cambridge Limited. . . . . . . . . . . . . . . . . . . . . . . . . . 538
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Reinforced Plastics
Structural Plastics
PROCESSES
Alloy Production
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Brazing
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Casting
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Coatings
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
217
Materials Science & Technology 2014
products and services index
Product/Services Index Header
Booth#
Coke Production
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Cold Rolling
Extrusion/Drawing
Firing/Drying/Melting
Gasbarre Products Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505
Powder Processing & Technology. . . . . . . . . . . . . . . . . . . . . . . . 427
Heat Treating
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Gasbarre Products Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505
Metal Samples Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Powder Processing & Technology. . . . . . . . . . . . . . . . . . . . . . . . 427
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Hot Rolling
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Machining/Grinding
Powder Processing & Technology. . . . . . . . . . . . . . . . . . . . . . . . 427
Mixing/Milling/Grinding
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Powder Processing & Technology. . . . . . . . . . . . . . . . . . . . . . . . 427
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Oxygen Steelmaking
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Powder Metallurgy
Gasbarre Products Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Pressing (Mechanical, Hydraulic, Compacting)
Gasbarre Products Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Process Lines
Steel Refining
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Surface Engineering/Modification
Metal Samples Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601
Thermal Spray
Vacuum Degassing
Extrel CMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615
Welding/Joining
Metal Samples Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
218
Product/Services Index Header
Booth#
PUBLICATIONS (JOURNALS, BUSINESS MAGAZINES)
Publications
Ceramics Expo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 624
Maney Publishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 621
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Springer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700
Wiley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 416
REFRACTORIES/FURNACE INSULATION
Refractories - Furnace Insulation
AdValue Technology LLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405
SERVICES
Materials Information Resources
Academia
Alfred University. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
Boise State University Materials Science & Engineering. . . . . . . 214
Granta Design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
Maney Publishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 621
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
Wiley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 416
Engineering Software
CompuTherm, LLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 604
Granta Design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Engineering/Scientific Journals
Maney Publishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 621
On-Line/Off-Line Databases
Granta Design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Wiley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 416
Quality Management
Tekscan USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
Research & Development
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Alfred University. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
CompuTherm, LLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 604
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Extrel CMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615
Granta Design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Rigaku Americas Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
TEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
Tescan USA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 516
Tekscan USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Verder Scientific. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
Wiley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 416
products and services index
Product/Services Index Header
Booth#
Technology Transfer
Alfred University. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
Granta Design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
Toll Grinding
Powder Processing & Technology. . . . . . . . . . . . . . . . . . . . . . . . 427
Union Process Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Trade Association/Professional Society
U.S. Department of Commerce
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Partsmaking/Materials Processing
Casting
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Cladding
Metal Samples Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601
Contract Welding
Metal Samples Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
CVD, PVD Coating
Angstrom Scientific Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Hard Surfacing
Heat Treating
Alfred University. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Machining, Grinding, Cutting, Drilling
Metal Samples Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601
Metcut Research Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 508
MTI Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Product/Services Index Header
Booth#
SURFACE ENGINEERING
Commercial Surface Engrg. Services & Coating Services
Metcut Research Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 508
Commercial Thermal Spray Services
Consumables
Aldrich Materials Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Buehler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509
LECO Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
Surface Treating Equipment
VACUUM EQUIPMENT
Gauges
Kurt J. Lesker Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408
Pumps
BINDER, Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
EMSL Analytical Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Kurt J. Lesker Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408
Valves
Kurt J. Lesker Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408
WELDING AND JOINING EQUIPMENT
Brazing Filter Metals
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Solders
EDAX Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Welding Filler Metals (Electrodes, Welding Rod, Wire)
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Metal Casting
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
P/M Sintering
Thermo-Calc Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Pressing (Wet or Dry)
Alfred University. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
Rapid Prototyping
FEI Company. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
219