Instructions

Part №:
Product:
449 Heads Road, Wanganui 4501
0800 4 BULLBARS or (06) 344 4100
[email protected] www.aliarc.co.nz
G840
NUDGE BAR c/w
BELLY PAN
FITTING INSTRUCTION SHEET
Make:
Model:
Year:
Specifications:
Great Wall
V240 (Petrol Variant)
20122/4WD
KIT CONTENTS
Quantity
4
4
12
8
4
2
4
2
2
2
2
1
1
1
Product
Checklist
M10 x 45 Bolts
M10 x 110 Bolts
M10 Flat Washers
M10 Spring Washers
M10 Nuts
M12 x 100 Bolts
M12 Flat Washers
M12 Spring Washers
M12 Nuts
PK040 Square Steel Backing Plates
Steel Backing Plates
NB G840 Steel Mount
G840 Fitting Instruction Sheet
Product Warranty Sheet/Customer Feedback Form
INSTRUCTIONS
1. Remove plastic skid/belly pan (4 bolts).
For technical assistance please phone 0800 4 BULLBARS
Page 1 of 2
2. Attach the steel mounts by placing the
M12 x 100 Bolts through the existing
hole in the chassis rail.
Secure using the square steel backing
plates (PK040).
3. Insert the M10 x 110 Bolts either side
of the chassis rail.
Secure using the steel backing plates.
Tighten all bolts.
4. Position bar and fix in place using the
M10 x 45 Bolts.
Level bar and tighten bolts.
NOTES







Check that the Kit contents are complete and undamaged prior to installation. Kit contents
must be replaced with specified accessory components.
Do not attach the bar to the vehicle using anchorages not intended for this purpose.
Do not use the bar for any vehicle other than those specified by the bar manufacturer.
Do not remove any labels from the bar.
Do not modify the structure of the bar in any way.
We recommend that a rust preventative is applied where holes are drilled.
The use of an alloy polish such as ‘Auto Sol’ is recommended for extra shine, however hot
soapy water will also clean well.
For technical assistance please phone 0800 4 BULLBARS
Page 2 of 2